Open Items issues in FB05 using BDC

Dear All,
Greetings....
We are developing TDS process for Nepal Country similar to Indian i.e J1INCHLN, J1INBANK, J1INCERT.  As there is no standard functionality available for Nepal Country in SAP, we have copied the standard above mentioned T-Codes to custom T-codes and modified. Everything is working perfectly except that, when we give Posting date range and execute the J1INCHLN custom program, it will internally call BDC program for FB05. It is calling correctly but while displaying the list of open items in FB05 it is displaying all the open items available for a particular GL account number and not restricting the posting date range.
But in standard J1INCHLN, when we execute this T-Code by givng posting date range, it will display the list of open items available for the posting date range entered in FB05.
I have not changed the BDC code and using the std program availble for J1INCHLN. Even though it is not behaving properly. So kindly suggest how to pass the posting date range to FB05 using Call Transaction or restrict the open items..
Regards
Gururaj...

As you said you did modifications.
First of all compare your codes of posting date in customized program with standard and check if the logic hasn't been hampered.
If everything is same then do check your recording again ( Check form of BDC whether data is being passed accurately ).
I hope it helps.
Happy Coding!!!
Cheers
Anup

Similar Messages

  • Selecting open items in F-03 using additional selections

    I need to select open items in a GL account using more than one additional selection eg. document type, posting date, assignment
    I select Additional Selections then document type then add a document type, then I select Other Selection - posting date and then Process Open Items. Only the first selection for document type is recognised.
    Is this a bug?
    Edited by: Richard Somerset on Jan 7, 2009 5:14 PM

    However SAP help suggest that this can be done
    Searching for Open Items  
    Use
    After you have entered an account with open items, you can search for specific open items to be cleared.
    On the screen for selecting open items, you can search for specific open items to be cleared using the following additional selection fields:
    Gross amount
    Document number
    Posting date
    Other fields depending on the system configuration
    Procedure
    To search for open items using the additional selection criteria, proceed as follows:
    Choose one of these fields, such as Posting date, then choose Execute.
    The screen for entering selection criteria appears.
    Enter one or more single values or ranges within the selection, such as 01/01/1993 through 01/31/1993 for a range of posting dates.
    To search for specific open items by other criteria (optional), choose Edit ® Select more.
    Repeat steps 1 and 2 for the other selection criteria.
    After you enter your selection criteria, you have the following options:
    Display the list of open items by choosing Goto ® Open items.
    Display the clearing document header and the items entered so far by choosing Goto ® Doc. Overview.
    Post the clearing document by choosing Document ® Post
    Edited by: Richard Somerset on Jan 8, 2009 9:05 AM

  • Another modif  tcode clearing open item from MM without use F-51

    all Guru ,
    Please help. Is there any way for another new modif  tcode clearing open item from MM without use F-51. So i can use copy transparent from main table MM, for item like plant, vendor, material,price, oty, plus add new field for calculation method in order to post this result formula through FI posting without F-51 but also can clear open item dan clearing line item ? or only can clear open item ? ...it's oke. For line item can be done maybe can be run with F-03 ir F13E
    I am trying to observe table BSIK (open item) and relation with BSAK(clear item)...is it right way ?
    Case :
    i want to clear open item for GL account inv.of.promises from transaction MM, with jurnal :
    inv.of prom (Db)
             Inventory (Cr)
    Then this inv.of prom must be calculated again with raise price. And then this cummulate in the of month.
    After that we want to clear with posting FI by searching any open item for that GL with jurnal :
           Other receiv.(Db)
           Accrued exp (Db)
                      Inv.of.prom (Cr)

    Hi PK,
    1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
    - Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
    2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
    You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
    3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
    OIM activation for a GL - Refer Note No.1356457.
    OIM Deactivation :  You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
    4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
    J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
    Hope this helps you.
    Regards,
    SAPFICO

  • AR Aging Open Items Issue in BW

    Hi Experts,
    We have activated 0FI_GL_4 data source and using the DSO ZFIGL_O2 (Copy of 0FIGL_O2) for data staging then load the data into custom cube ZFIAR_C01.
    The issue is when the AR document open in the ECC sometimes it is cleared right away or sometimes in future. All the documents that are cleared at future date do not have 0Clear_Date and 0Clearing_Document_No in the original document.
    When the delta loads run and pull these documents into BW and write it into the cube. The original document entry that clears in future contains blank in the fields of 0Clear_Date and 0Clear_Document_No. Later on the document cleared in ECC and come to BW but as a separate (documents) entry having 0Clear_Date and 0Clear_Document_No on it. But for the original document that come to BW and loaded in the cube for the first time does not updated the fields 0Clear_Date and 0Clear_Document_No .
    As of result when the query executed based on 0Clear_Date parameter it picks the original document entry that does not have 0Clear_Date and 0Clear_Document_No on it and  shows as an Open Item even customer paid the full amount and no balance due to the customer.
    Due to the add functionality of Info Cube it adds all the entries but the two fields 0Clear_Date and 0Clearing_Document_No are not updated for the original document entry that loads into the cube initially. For example the document opened in ECC and loaded into cube on 01/17/2014 and cleared on 01/22/2014 with other entry but the 0Clear_Date and 0Clear_Doc_No of original entry is not updated. See the attached pictures
    Can anyone of you suggest me how can I rectify this problem? All kind of ideas will be appreciated.
    Thanks,
    Shehzad

    Thanks for your reply but I am having the problem in cube. let me give you an example
    For example When original entry writes from DSO to Cube it does not have 0clear_date and 0clear_doc_no. See below:
    Original Entry (1st Entry):
    Customer|0Posting_Date|0Clear_Date| 0Clear_doc_no| Amount
    ABC | 01/17/2014 | | |10.00
    Then the second entry in which amount paid in full and have 0clearing_date and 0clearing_doc_no loads from DSO to cube. 
    Second Entry:
    Customer|0Posting_Date|0Clear_Date|0Clear_doc_no|A mount
    ABC |01/17/2014 |01/22/2014 |123456 | -10.00
    After loading the delta the 0clear_date and 0clear_doc_no of first entry is still blank that is why i am having problem because when the query executes it pull the original entry because it is not filled. How can i update the 0clear_date and 0clear_doc_no of first entry in cube. I can add the custom field "Status" in cube and in Transformation I can check base on 0clear_date and 0clear_doc_no, but the problem is how can i overwrite the first entry in the cube with 0clear_date and 0clear_doc_no.
    Regards,
    Shehzad

  • Vendor Open item issue - Functional area wise

    Hi Gurus,
    We want to create Vendor Open item report using SQVI / report painter - Functional area wise, we are creating the report using BSIK table, but it is showing the credit amount coming as +ve.  We are not able extract the net amount, as it is not reconcile with FBL1N open balances.
    Please help me with your inputs with steps / procedures to design the report in SQVI, if there is no possibility, please let me know if there is any Std Report Group to achieve this functionality.
    Regards
    Naveen

    Hi Naveen,
    I would suggest you to follow following threads from Mr. Jogeswara Rao Kavala on Query reports:
    Calling Reports from an Infoset Query
    Infoset Query: User Defined Fields
    10 Useful Tips on Infoset Queries
    Alias Tables in Infosets and QuickViews
    Infoset Query: Display message in Status bar
    Regards
    Saurabh

  • Customer open items not getting cleared using F-28 OR F-30

    If I use F-28 OR F-30, to create in coming payments manually, when I do FBL5N for the Open items, I see that Customer Payments are still reflected in the Open items. I expect that since I made the payment against the invoice the Open items should be cleared, why is this not happening?

    all right MN,
    i guess figured it out as to what could be the problem with you..... here is an example what you have been throuhg
    you see the thing is your invoice was of 396/- $
    which has a discount of suppose  2%
    now the total amount the customer has to pay is  388.08$
    but what you actually recieved is less than what the customer had to pay lets say 380 $
    now what you might have done is according my analysis is that
    you cleared the invoice with 380 $ with out actly changing the discount amount , because the amount after discount was 388.08 $  but you cleared it with 380$ which means still the system says the customer has to pay a the balance 8.08$... 
    now what you need to do is to go back to the tcode F-32 and try to change the disc amount to an amount that would make the invoice amount equal to what the customer has paid.  and then try to clear the transactioin....
    and one more thing   i feel tcode f-28 is much better than tcode f-30 to avoid complications
    regards
    sayeed

  • Open Item issue in fs00

    Dear Sapgurus,
    I created one g/l code in fs00, not selected open item management, i have posted 5 documents, when i go to change option in fs00 block the g/l code and se38 i choose programme and executed system it shows below error message    
    Do not use the report program to set up open item management for the
    account.
    Create a new account with the correct account assignment. Post your
    items to the new account. If you want to use the original account
    number, you must bring the account balance to zero, change the account
    assignment, and repost the items. You can remove the old items by
    archiving the documents.
    My requirement is 5 documents with open item only then how to do that.
    Regards
    Surendra

    Hi,
    If you subsequently define open item management for a G/L account, this entry only applies to the items which are posted afterwards. At the date of the change, the account must display a zero balance.
    Also, when canceling this indicator, the balance must be zero. You therefore have to clear the remaining open items before making the change in the master record.
    Regards,
    Shakeel

  • Open item issue and clear item issue in fbl3n

    Hi Guys,
    relating to Line items are not showing as cleared items and showing as in Open line items of G/L account.
    Find the below observations for your reference.
    The Document no. 920006532 in Company code 1010 ( IRN ) is shown in the open items list for GL account 292351 but also shown as cleared by Doc. No. 402020795 in the system. But while reviewing the cleared items in FBL3N the items of Doc. No. 402020795 are cleared for Doc No. 909000663 & 909000717 and not for the Doc. No. 920006532. That is the main reason the document line items are shown as open.
    Please guide deleted
    Regards
    Supreme
    Moderator: The SDN community would appreciate if you omit word 'immediately' in your requests

    1. Only Balances in Local Currency:
    Indicates that balances are updated only in local currency when users post items to this account.
    Use: You would set this indicator for accounts in which you do not want the system to update transaction figures separately by currency.
    It is required to set theis indicator in:
    1.  cash discount clearing accounts
    2. GR/IR clearing accounts.
    It cannot be set in reconciliation accounts for customers or vendors. Setting it in all other instances is optional.
    Open item management:
    Determines that open items are managed for this account.
    Explanation: Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
    Procedure: Set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
    USE:
    A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
    Set up accounts without open item management if no offsetting entry is to be made against a posting to this account.
    Accounts that are managed on an open item basis include:
    Clearing accounts:
    Bank clearing account
    Payroll clearing account
    Cash discount clearing account
    GR/IR clearing account
    Accounts that are not managed on an open item basis:
    Bank accounts
    Tax accounts
    Raw material accounts
    Reconciliation accounts
    Hope this is helpful. Pleas assign points if it is.
    Julia

  • Vendor Open item issue - legacy load

    Hi Gurus
    I need your help on an issue related to venddor open items. We migrated the vendor open items from legacy system to ECC. Now we have realized that for few vendors, we had made payments by wire just before doing the legacy load. Now these items are showing as open items for these vendors in ECC though the payment was already made before we went live. As it is constantly showing as liability, we need to close these items.
    Can you please advise me how can we close these items without making double payment?
    I appreciate your help.
    Thanks,
    Shalu

    Hi
    1) reverse the entries for those invoices, so the entry will be,
    Vendor Dr
    To AP load A/c Cr
    2) Then Pass the entry in the GL balance for the same amount,
    AP load A/c Dr
    To GL load A/c Cr
    3) Update the GL balances where the payment got posted in old system
    GL load A/c Dr
    To GL A/c (mapped to Old system) Cr
    Follow the above steps, if you want to repeat the Data migration steps or else simply clear the invoices in the new system.
    Regards
    Nikhil

  • Open items issue in fica

    Hi.. All
    if invoice amt is 100 $ . customer has paid 105 $ with this a cr open item  is created  with 5 $ . this cr open should adjust with next invoice. but which is not happening , i need help in this issue how to slove this problem,
    thx in adv
    surya pamarty

    In customizing have a look at:
    SAP Utilities - Invoicing - Invoice Processing - Item Selection in Invoicing - Item Selection in Account Maintenance/ Define Sub-Items
    You would want to select your item, the $5, for account maintenance in your invoice.

  • Credit Check-Oldest open item issue

    Hi all
    Currently all the sales orders that are created for a particular customer is getting blocked as u201COldest open itemu201D and we are releasing the orders by VKM3. Will you please tell me how I can find in which order/invoice this open item is lying?
    Regards

    Dear Monika,
    You can check the open items in FD10N transaction which will give the amount which are due from the customer.
    Also, you can use VA05 and VF05 to see the list of Open oders and Open invoices for the customers respectively.
    Hope this helps
    thank you
    SP.Venkatesh
    Edited by: venkatesh paulraj on Mar 7, 2011 8:47 AM

  • Open item issue

    Dear Sap Gurus,
    Client as given one format for vendor open tem balancess based on days and due date, i post in f-02  debit is upload g/l account and in this one amount, duedate, credit is actual vendor code and amount, days, payment reference and saved 1000rs   after that i paid 500 based on refernce of document number. If i check open items system shows what ever i have already paid 500 rs it is showing open  item why it shows.
    Regards
    Veeru

    Dear,
    You have paid partially, that is 500 rs out of 1000Rs. The system will show both the amounts in the vendor line items as open, but if you check the balance then it would be 500 rs only. Again when you pay balance 500 rs then it will show zero balance with no open items.
    In case if you want only balance 500 rs then you have to do the payment based on residual instead of partial, here the system will clear the original invoice and creates a new document for the balance amount.

  • G/L Open item issue

    Dear Sapgurus,
    I was create one g/l code name is  transaport charges in this one service tax 10.3% i was claulate tax through f-02 transport charges dr 1000    service tax  dr 103   to bank  1103 but if i check  fbl3n  it is showing open item. But is is already Cleared.
    Regards
    Satyam

    Dear,
    Carefully check which date you are entering in the open item field in FBL3N and what is the clearing date of this document.
    Regards,
    Chintan Joshi

  • Customer Open item issue

    Hi Experts,
    I have requirement for Z report .
    if we receive payment for multiple invoices in one cheque and if we are clearing multiple invoices at a time with tds in f-28.and here where as our requirement is client need Z report for bill wise collection.i am bit confused in which table this type of data is stored i want fetch bill wise collected amount and the tds amount for that respective invoices if user clears multiple invoices at a time. can any help me in which table this data is stored.
    Regards
    Diwa

    Hi Ravi,
    Thanks for immediate response !
    As i said earlier  we are processing multiple invoices with one payment along with this we are posting tds amount directly to tds Gl account here we are not updating any tds tax codes in customer data so tds table will not get updated.
    For ex:
    we have posted 2 sales invoice for 100000 and 50000 and at invoice level we are not capturing any tds amount.
    accounting entry is as below
    Revenue ....Dr 100000
    Customer cr...10000
    Revenue....Dr 50000
    Customer...Cr 50000
    when we are receiving payment we have received payment for two invoices 145000 by deducting TDS.
    where we are processing F-28 we are clearing both invoices at a time and we are posting tds amount for tds gl account along with payment.
    Accounting entry as below
    BANK....Dr 145000
    TDS.....Dr   5000
    Customer ..Cr  150000
    Here client requires bill wise collection amount and bill wise tds deducted amount.from which tables i can get this details.can you please guide me.
    Regards
    Diwa

  • Standard text entry for Service line items using BDC

    Hi,
         I want to enter standard texts for service line items of RFQ created using BDC, if it is a line item i can pass RFQ_number+line_item number as TDNAME in SAVE_TEXT function module, but for Service line item what value we need to pass in TDNAME.
    Is there anyway we can capture the package number in BDC of ME41?
    Regards
    Bala Krishna

    .

Maybe you are looking for