Open items of Vendor are not getting processed in F110

Hi Experts,
"KR" documents posted in the month of April and I can see Vendor open Items in FBL1N for a particular vendor.
When processing payment through F110, no open items can be taken for the vendor neither they are displayed when I tried in ZFB05 (Post with clearing) in process open items. In ZFB05 system says: " No line items"
Where is the problem? Please help.
- Nilesh

Hi,
Here might be lot of reaons.
1. May be they are not reached to due date.
2. May be same vendor blocked to some other proposal
3.May be those items have payment block
4. May be Sepal GL Accounts not assign to All company coed Configuration
5. Invoice posted into different Payment method and payment terms
6. Please check the FBZP Configuration
Regards,
Surendra.

Similar Messages

Bulky Message are not getting processed

Hi All,
Recently we have upgraded our XI systems to EHP4.
After upgrade Bulky files are not getting processed into XI system. Small files are getting processed successfully.
Earlier we had faced same issue at that time we have maintained some parameters in transaction RZ10, RZ11, SXMB_ADM-->
Integration Configuration--> HTTP time out parameter.
Same parameters are still there. But now the message is not getting processed in XI when we check into sxi_monitor. Message mapping is also not seems to be a problem as we havnt put any bulky logic over there.
The message is not getting processed ahead of Receiver Grouping . Please find attached log from Performanceheader
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134229.930472</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="evoxicqab">20091210134232.052577</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134232.059576</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="evoxicqab">20091210134232.07151</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134232.071518</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="evoxicqab">20091210134237.239947</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134237.241179</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="evoxicqab">20091210134237.250385</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134239.999045</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="evoxicqab">20091210134240.001292</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134240.001413</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="evoxicqab">20091210134240.026156</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="evoxicqab">20091210134240.026164</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>

Hi
Have you checked this thread, same discussion here
Performance of XI Interfaces
Also check this blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards
Ramesh

CCM: More than two items in catalog are not getting loaded into CCM

Hi All,
We configured CCM to our client and working fine, but we are able to upload only two items. when we add third item or more items to catalog, these are not getting loaded in to CCM (The catalog is loading find and there is no problem when loading).
The log shows green, but items are not there in CCM.
Is any one faced similar problem?
How can we export master schema from CCM to desktop?
Thanks,
Ravi Varma

It is Supplier catalog
Ravi

Vendors are not replicated

Hi Everyone,
I am working on SRM 7.0 - ECC 6.0 landscape with Classic Scenario. When I try to replicate vendors with BBPGETVD only 2 vendors got replicated out of 288. Now when I try to replicate them again I receive a message saying "All backend descriptions are already assigned in the system". I had seen this message earlier when you try to replicate vendors that are already replicated. So I tried to use BBPUPDVD to see if I can update and get the missing vendors. However, when I get to the second screen I see that only those 2 vendors that has been replicated are considered to be updated and the remaining 286 vendor are given in a list as missing vendors.
Can you please help me to understand why these vendors are not getting replicated? Can it be that they have missing information so SRM do not consider them for replication?
Thank you in advance,
asli

see our dave important point.
Error repliacting vendors
Yes, just make sure that the external range in SRM starts with your lowest vendor number in ECC and ends with the highest possible number.
There will only be 1 range in SRM but it must cover all 5 ranges in ECC.
Just make sure your internal range in SRM does not overlap with any of your vendors in ECC or you will have major problems. I like to give SRM a very high range for internal business partners, then you can use most of the numbers for your external ranges to match ECC.
br
Muthu

IDOCS Error - Not getting processed automatically

Hi All,
We are loading hierarchy for a Product from R/3 system using the standard datasource.
When we execute the info package, IDOCs are not getting processed automatically.
We are facing the below error message.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
No status record was passed to ALE by the applicat
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
But when we goto BD87 and process the IDOCs manually, these are getting posted and the hierarchy is loading.
Can someone please guide me on what is the issue with the IDOCs and how to make them to post automatically.
Thanks in Advance
Regards,
Sachin

Hi,
This will happen due to Non-updated IDOCu2019s in the Source system i.e., occurs whenever LUWu2019s are not transferred from the source system to the destination system. If you look at RSMO of the status tab, the error message would appear like u201CtRFC Error in Source Systemu201D or u201CtRFC Error in Data Warehouseu201D or simply u201CtRFC Erroru201D depending on the system from where data is being extracted. Sometimes IDOC are also stuck on R/3 side as there were no processors available to process them. The solution for this Execute LUWu2019s manually. Go to the menu Environment -> Transact. RFC -> In the Source System from RSMO which will asks to login into the source system. The u201CStatus Textu201D for stucked LUWu2019s may be Transaction Recorded or Transaction waiting. Once you encounter this type of status Execute LUWu2019s manually using u201CF6u201D or Editexecute LUWu2019s(F6).Just keep on refreshing until you get the status u201CTransaction is executingu201D in the Production system. We can even see the stuck IDOCu2019c in Transaction BD87 also.Now the data will be pulled into the BW.
Hope it helps a lot.
Thanks and Regards,
Kamesham

Data packet not getting processed

Hi SDN's
I m loading data from one ODS to 4 regions , the source ODS is successfully loaded from der to the data targets the load is getting failed or taking loang time .
upto transfer rules the data is successful, in update rules data packets are not getting processed
kindly suggest solution, points will be assigned
thx in advance

Hi Katam,
In the target ODSs go to the monitor screen for a particular request -> in the menu bar go to environment -> transactRFC-> in the datawarehouse -> give the ID and date -> execute.
Check if there are entries in that. Usually this queue will be stuck and you need to execute the LUWs in the queue manually.
if it says transaction recorded u need to execute it manually
Please revert if any issues
Edited by: Pramod Manjunath on Dec 19, 2007 4:48 PM

IDOC status 64 not getting processed.

Hi Gurus,
      I have a problem where IDOC's with status 64 are not getting processed via background job. the IDOCs weere getting processed with the background job till today evening, but suddenly no changes were made and the processing of IDOC's with status 64 has stopped and they keep filling up, when i checked the log of the Background job it says finished, and the log has the following information,
17.09.2009 19:05:23 Job started                                                                   00           516          S
17.09.2009 19:05:23 Step 001 started (program RBDAPP01, variant POS_IDOCS, user ID SAPAUDIT)      00           550          S
17.09.2009 19:05:25 No data could be selected.                                                    B1           083          I
17.09.2009 19:05:25 Job finished                                                                  00           517          S
Kindly advise on this.
Regards,
Riaz.

When i process the IDOC's using BD87, they gets processed wiwth out aany issues no dump is displayed, idoc gets a status 53 after processing via BD87.
There is another problem how ever there are other jobs scheduled to run in the background other than this background job which are getting cancelled and have two different error logs for different jobs they are as follows.
1) 18.09.2009 02:00:06 Job started                                             00           516          S
18.09.2009 02:00:06 Logon not possible (error in license check)             00           179          E
18.09.2009 02:00:06 Job cancelled after system exception ERROR_MESSAGE      00           564          A
2) 18.09.2009 00:55:27 Job started                                                          00           516          S
18.09.2009 00:55:27 Step 001 started (program RSCOLL00, variant , user ID JGERARDO)      00           550          S
18.09.2009 00:55:29 Clean_Plan:Gestartet von RSDBPREV                                   DB6PM         000          S
18.09.2009 00:55:29 Clean_Plan:beendet                                                  DB6PM         000          S
18.09.2009 01:00:52 ABAP/4 processor: DBIF_RSQL_SQL_ERROR                                00           671          A
18.09.2009 01:00:52 Job cancelled                                                        00           518          A
This is a production server and the Licence is valid till 31.12.9999, and has no issues with the license.

RSEOUT00 - Idoc not getting processed

Hi All,
I have few idocs in prod.system with status 30 and they are not getting processed using RSEOUT00.
I tried using back ground job / forgrond / BD87 also but they are not getting converted to 03 status.
receiver port is xmlgen.
Any thing like idoc lock ? or something other that is preventing it process ?
Please let me know if anything.

check out the multiple threads in SDN regarding this issue
idoc remains random in status 30
some of the common pointers looks to be locked IDOC (check in SM12), SM58 to see if anything is in the RFC queue (though I doubt that would be the case)..
How are you generating your idoc? standard FM or MASTER_IDOC_DISTRIBUTE?

MIRO - Business Area not getting updated in Vendor Line item

Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari Prasath

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?

When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?

babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis.

TDS line items are not getting reflected in J1INCHLN

Hi Experts,
While generating TDS challan we are not getting advance line items in J1INCHLN screen
We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
Below is the example
XYZ                                                                         43,000.00
XYZ                                                                         46,000.00
Bank                                                                        96,329.00-
S/Tax Interim-In Cr                                                    5,160.00
S/Tax Interim-In Cr                                                   3,864.00
ST Interim E.C-In Cr                                                 103.00
ST Interim E.C-In Cr                                                 77.00
ST Inter H E.C-In Cr                                                 52.00
ST Inter H E.C-In Cr                                                 39.00
TDS Pble Contractors                                              966.00-
TDS Pble Contractors                                              1,000.00-
I checked the below possibilities for reason why its not getting reflected
Vendor master having recipient type
WITH_ITEM table updated with recipient type
In the line item also having Business Place and section code
Please suggest me is there any way to resolve the issue.
Thanks & Regards,
AIM

Hi,
Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
Regards
Divya S

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Sub items are not getting copied into excise invoice

Hi Guru's
I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
Kindly suggest me how can I copy subitems into excise invoice from billing document.
Thanks & Regards.
Swamy H P

Hi Lakshmipathi,
Thank you so much for the response.
Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
Thanks & Regards,
Swamy H P

Getting error message in debug "Page contains page items/buttons which are not assigned to a region!"

Hi,
I created a form and when I submit, it goes through but there is no "success" or "failure" message on Apex. I tried debugging it and got this message:
"Page contains page items/buttons which are not assigned to a region!"
I looked at the page definition and it seems like everything is assigned to a region. Much appreciate your help.
Thanks!

For your message, the relevant branch needs "include process success message" to be checked - and a value in success/failure in your process.
Check the submitting & landing page for items not in a region. Under the items section there may be items listed separate to those under specific regions.
It's possible these are related, but not guaranteed.

Open items of Vendor are not getting processed in F110

Similar Messages

Maybe you are looking for