Open iTunes to populate this list.

Hi, when I attempt to add sound FX or Music etc in iMovie (or Keynote) I get a message that says "Open iTunes to populate this list" Unfortunately opening iTunes doesn't help. I can't access my music with iTunes or Keynote etc. Any help would be very appreciated.
I have heard that deleting a prefernce file in the Media Borwser can solve this but I'm not sure how to find it.

Thanks for your help. I'm not sure why but my Library folder is off my HD. Its not off my username folder. Even in my Library folder those files indicated in the support page weren't there. I may have deleted them earlier today when I deleted several preference files. Such a hassle. I have already reformatted and reinstalled as well....I was amazed that it did nothing.

Similar Messages

  • IMovie says "Open iTunes to populate this list."

    When I try to add a photo or song to my iMovie project, the program says "Open iTunes to populate this list." (In the photo section, it says "Open iPhoto...") Opening either program doesn't change anything.
    I've reinstalled Lion and iTunes to no avail. I have also moved the "iTunes Music Library.xml" file to the desktop, and although iTunes creates a new file, the problem persists.
    I get the same messages for iTune and iPhoto in other programs, including Mail and Garageband. The problem seemed to pop up when I was connecting my iPhone to the computer to send an iMovie iOS project to iTunes.
    Please help.

    Hi, I have this same issue. I'm not so sure how to remove the preference file from my media browser though. I don't even know what the media browser is. Any help would be very appreciated. I can't access my iTunes data from iMovie or Keynote.....likely other iLife and iWork programs as well.

  • When I try to add music from my itunes onto my imovie project, it says "Open iTunes to populate this list."  I opened it and nothing happened.  Please help.

    When I try to add music from my itunes onto my imovie project, it says "Open iTunes to populate this list."  When I open it nothing happens.  Please help.

    It may help to trash the iApps Preferences File.
    See instructions here.
    https://discussions.apple.com/docs/DOC-4061

  • I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list.  I have t

    I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list.  I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.

    After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

  • Open itunes to populate this list in iPhoto

    IOS 10.10 yosemite
    Iphoto 9.5.1
    iTunes 12.0.1.26
    My problem is when i open my iPhoto and pick the song for my slide show, it show "open iTunes to populate this list" on the iTunes selection.
    I have tried deleting the iTunes library xml file and creating a new playlist to create back a new library file but i still can't link my iTunes library file to my iPhoto.
    I have no problem at all before i upgrade my mac to yosemite.
    Please help!

    I have this exact same problem! Did you resolve it at all? I did not have this problem before the Yosemite upgrade.

  • My imovie keeps saying "open itunes to populate this list" but itunes is opened. How do I get my itunes back on imovie?

    I have restarted my computer a bunch of times. I've opened itunes first then imovie but it just says it's loading itunes...but it continuously does that and doesn't load any songs from itunes. It's the first time this has happened and it's ******* me off.

    After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

  • ITunes missing from Media Browser -- "open itunes to populate list"

    I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
    Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
    I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
    Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
    I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

    moontroll wrote:
    unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
    another way:
    http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    moontroll wrote:
    how do I reinstall GB w/o a disk?
    you can't, you'd need to find the DVD
    moontroll wrote:
    Can I do it through App Store and will it recognize that I have already purchased it?
    no, it'll only recognize your purchase if it was through the app store

  • When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing

    When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing, no joy, uninstalling and re installing, no joy. Any ideas?
    <Subject Edited by Host>

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I had a new hard drive fitted to my imac and restored it from my time machine back when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

    I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

    To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file.  Once the file was deleted I was able to open iTunes without difficulty.  Note that I am running Windows 8.  Hope this helps!

  • When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

    When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

    Any suggestions please?

  • TS1717 Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

    Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

    Solving MSVCR80 issue and Windows iTunes install issues.

  • When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

    when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    Does iTunes launch properly now?
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

    Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

    go to the directory where the itunes librairy is stored (google search!). Select the file hit "command+i" on your keyboard or control click on the file and select get info. there is an option to either lock or ulock the file. unlock it. restart your computer and see if it works.

  • When i open itunes it get this error message (-42110) just did an update and it still didn't go away????

    hen i open itunes it get this error message (-42110) just did an update and it still didn't go away????

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • When I try to open itunes it says; This version of itunes has not been correctly localized for this language.  Please use the English version.  How do I fix this problem?

    When I try to open itunes it says; This version of itunes has not been correctly localized for this language.  Please use the English version.  How do I fix this problem?

    Hey KEBENNETT, 
    It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally. 
    I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
    Issues installing iTunes for Windows - Apple Support
    All the best,
    Jeremy 

Maybe you are looking for

  • How to Put two icons together in a result field in ABAP

    Hi All, I have a results column in a report which basically show if the delievery was made on time/late/early. I also have a another column which shows icons as below. On Time: ICON_LED_GREEN. Late:     : ICON_LED_RED. Now what I am trying to do is i

  • Why do you keep alienating your user base with worthless UI changes?

    If it weren't for some add-ons that I've come to depend upon which are not supported in Chrome, I'd have switched long ago. But version 29 is the last straw. If I can't get version 28 re-installed and working again, I'm quitting FireFox for good. You

  • Error when canclulating YTD

    I get the following error (nQSError: 27009] Unresolved identifier: "CUSR"."D_TIME"."C_YEAR".) when defining the expression to calculate the YTD value. My expression is as follows ToDate("TEST"."F_PRODUCTION"."PRODUCION" , "TEST"."D_TIME"."C_YEAR" ) T

  • Printing of Output material in Subcontracting challan

    Hi all,         We are creatinjhg the subcontracting challan(India) with reference to the transfer posting document(541 Movment type). and then printinng the same. In print output only the material and quantity supplied to subcontractor only comes in

  • Rman with error RMAN-06054

    first, i backup all datafiles. then i delete the datafile of system tablesapce. then i recover database by recovery manager. it makes these errors.i do not how slove it.i nees help,i will thank ereryone who help me RMAN-03022: compiling command: reco