Open Laszlo components in ABAP Webdynpro is it possible through flash isla?

Hi,
I have serious question that is not answered.
Can I see flash Isands for ABAP Webdynpro and use Open Laszlo components.  Basically Flex is not open source and we would like to use open laszlo components instead of flex.
Can this be done in ABAP webdynpro?
Regards,
Suresh.

hello suresh,
Please find my reply inline below:
suresh babu muthusamy wrote:
Hi,
>
> I have serious question that is not answered.
>
> Can I see flash Isands for ABAP Webdynpro and use Open Laszlo components.  Basically Flex is not open source and we would like to use open laszlo components instead of flex.
>
Adobe has decided to contribute the full Flex SDK (including MXML compiler, automation libraries and data visualization components) to Apache Software Foundation as an independent open source project. "
There is also an Open Source distribution of Adobe Flex SDK. http://opensource.adobe.com/wiki/display/flexsdk/Flex+SDK. Only the Adobe Flash Builder (previously Adobe Flex Builder) is a commerical software.
> Can this be done in ABAP webdynpro?
>
Yes, You can integrated any Flash UI with ABAP webdynpro using Flash Island (no matter how you developed it )
> Regards,
> Suresh.
Best Regards,
Tarun

Similar Messages

  • Eventing on Graphics using ABAP Webdynpro is it Possible -EHP5

    Hi,
    I have below graphic output requirement..
    On X-axis i will have fixed columns.. and I should have an option to  DRAG and DROP contents which should be like Blocks  from 1 column to other column.. which eventually should update database..Is it possible technically ? I know we can do drag drop whole column in ALV from EHp2 but this is some strange requirement for me..How do we handle this?
    EMP3
    EMP1                 EMP2                EMP4        
    A                     B                   C                   D
    FYI..We are SAP ramp up customers for EHP 5.0
    Should we use
    IGS( Internet Graphics Server) with Business graphic? Can we handle eventing?
    Adobe Flex? If so do we need any extras for Client machines like flash? How complex would it be?
    ALV Display as Graphic? As far as i know this is just display
    Rgds
    Tarun
    Edited by: SriTarun on Jun 6, 2011 3:36 PM

    NB - the "data" that is returned by these classes is the data as defined in an adobe form - it doesn't return the content of non-form PDF documents.
    The PDF must be an interactive form ( although that doesn't restrict you to using the SAP process for creating the form is my understanding - but I could be wrong. )
    Edit - I was wrong! ONLY PDF documents that have been created by the ADS can have data extracted using these classes. So unless you are using Adobe interactive forms - then you will get no value from this functionality - and if you're using AIF then you're probably just use the standard UI element
    Edited by: Chris Paine on Oct 26, 2010 6:04 PM

  • SOFM: Dsiplay method is not working when called from ABAP Webdynpro

    Hi All,
    I want to open an attachment from ABAP Webdynpro.
    I have approached in this fashion:
    1) Get the attachments as SOFM object key
    2) On Click of a link on Webdynpro, I am calling a function module within which I am creating an instance of the SOFM object
    3) Then I am calling the DISPLAY method
    It is not opening.
    But, if it opens when I driectly execute the function module. It open when I directly test the business object.
    Any Idea ?
    Thanks & Regards,
    Deb

    Display Method uses the Dialogue Module, You should not access such methods in web dynpro which are SAPGUI specific.
    Web Dynpro Applications are run in Browser environment which cannot understand Dialog, it can understand only HTML.
    Read the attachments and get the content and use FileDownload UI element to show it to user.
    Abhi

  • BRFplus + BPM + ABAP Webdynpro Architecture

    Hi Gurus,
    We are setting up Data Governance model in our company. As a part of this, we are currently evaluating various options. We are also  considering BRF plus solution. Some of our high level requirements are as follows
    1.     Break SAP transactions for Material Master and regroup the fields according the new business processes in different screens in web front end (possibly ABAP WebDynpro)
    2.     Set up a workflow solution for new business processes (possibly BPM or Business Workflow)
    3.     Integrate Business rules and validations, data checks and so on using BRF plus in to the workflow.
    What that means is that whenever users make changes to the Material master Data in web front end, then a workflow is triggered and rules are applied to the data before the data is changed/created.
    My questions are as follows
    1.     Do we really need all these 3 components namely ABAP Webdynpro, BPM or Business Workflow and BRFPlus to achieve what we want to achieve? Or we can achieve this without having one of the components mentioned above?
    2.     If yes or no, how the architecture should look like?
    3.     How do we integrate these techonologies (which features of what component)
    4.     Any examples you can share?
    Shai

    I don't see the need of web dynpro or BPM if you only want extra data validations. 
    You can integrate extra rules into your regular system as is using BRFplus for extra validations.

  • ABAP webdynpro app not redirecting using Outbound plug in portal

    Scenario-
    There is one Abap webdynpro application APP1 calling another abap webdynpro component Comp 2 through outbound plug on a button click. This is working fine if service is tested independantly.
    SAP ECC system is having a webispatcher and the application should be accessed using webdipatcher only i.e. ECC should not be called directly.
    SSL has been configured b/w ECC and webdipatcher.
    The Abap webdynpro application APP1 is integrated into portal using Abap webdynpro iview.
    Setting in Portal system are reffering to Webdipatcher for ECC system instead of ECC system directly.
    Issue-
    App1 is loading successfully into portal and all the data is coming properly but when trying to navigate to second component on button click it is not navigating. iview is getting refreshed but not redirecting to required component and is still on the same application.
    Please suggest the reasons and solutions if anyone has clue about it.
    Regards
    Deepak

    Hi,
    Please refer to these links -
    How to secure WDA over an external facing portal
    WebDynpro ABAP and Portal Navigation
    WebDynpro ABAP and Portal Navigation problem
    Please check for the portal eventing between the applications.
    Regards,
    Lekha

  • ABAP webdynpro concepts

    If i want to work with ABAP webdynpro,
    what are all main areas or concepts to be covered in ABAP webdynpro?

    Hi,
    Go through the below links,
    Notes:   https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9 [original link is broken]
    Wiki : https://wiki.sdn.sap.com/wiki/display/WDABAP
    https://wiki.sdn.sap.com/wiki/display/WDABAP/NewtoWebDynproABAP
    and also links,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/263c6874-0701-0010-3996-8266a631fead?prtmode=navigate
    /people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
    Regards,
    Azaz Ali.

  • How to open a brfplus Catalog from abap webdynpro screen.

    How to open a catalog from abap web dynpro application. and also what roles are to be provided to a user for restricting access only to the objects in the given catalog.

    Hi Pratik,
    do you use NetWeaver 7.0, Enhancement Pack 2 (or higher)?
    Then you can then define an own UI mode class and set it via SET_UI_MODE( ) in IF_FDT_WD_UI_EXECUTION before you call EXECUTE_CATALOG_BROWSER().
    An explanation how to define a UI mode class is available in the chapter "Configuration through a UI mode class (7.0/7.1 EHP2)" of the document [Embedding a BRFplus Object in an ABAP WebDynpro Application|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50e44bf9-9135-2d10-2ea2-b13e5be8661d]
    Hint: With help of the interface IF_FDT_WD_USER_CONFIGURATION you have the possibility to hide views in the navigation view by using the respective, listed parameters (e.g.. GC_PARAMETER_FAVORITES_VIEW). Please be aware of that the configuration is just available to adapt the UI, it does not fulfill the requirements to act as an authority concept. If you do not set the parameter GC_PARAMETER_HIDE_SETTING_DLG of the interface IF_FDT_WD_CONFIGURATION to false, the user is also able to change it via the configuration dialog in the BRF+ workbench.
    With the current available BRF plus standard authority concept you can prevent that the user can see the content of objects like applications but you have no influence to prevent the user from seeing UI artifacts like the repository tree. Please consult the documentation to learn more about its capabilities.
    Kind Regards,
    Marco

  • Need to open an ABAP WebDynpro application from Portal UWL work item

    Hi All
    I need some suggessions on how to navigate to an ABAP WebDynpo application iview from a mail(Work Item) in portal UWL.
    Requirement in detail:
    Agreements will be created from portal( Agreement Creation Application is developed in ABAP webDynpro and iview has been created with in the portal for this WD application). as and when the agreement is created a mail (ECC Workitem) should trigger to the approver, who has access to portal and check the mail(Work Item) from the portal UWL.
    The mail body should consist the link to the Agreement created in portal ( Link to navigate to the Agreement Creation ivew).
    So, the main requirement is user should navigate to the Agreement creation iview when he open the mail from UWL.
    Mail can be sent from ECC by using ABAP Function modules or by creating a workflow
    Please advice me on how can we achieve this requirement.
    Thanks & regards
    Vijay Bedamsetty
    Edited by: VIJAY BEDAMSETTY on Apr 19, 2011 5:42 PM

    Hi,
    You can call the iView directly by using NavigationTarget..
    http://myServer:50000/irj/portal?
    NavigationTarget=ROLES://portal_content/myFolder/myRole/myIview
    Plz note that the iView you are calling should be part of a Role.
    And the PCD location of the iView in the Role must be given for Navigation Target.
    Check this URL
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/014421d21d6fade10000000a11466f/frameset.htm
    Thanks
    Prashant

  • File open dialog - abap webdynpro

    Hi all,
    please, i'm newbie in abap webdynpro. How to create an input field with file open dialog?
    thanks
    Filip

    Hi,
    You can use FILE UPLOAD UI element from the UI Library for file upload functionality. It returns a XSTRING for the uploaded file. Create an attribute of type XSTRING in your view which contains the FILE UPLOAD UI element and bind the attribute to data property of FILE UPLOAD UI.
    You have to manipulate this XSTRING to get the values from the file.
    Thanks,
    Abhishek

  • Communication of two ABAP WebDynpro Components

    Hi there,
    I am new to ABAP WebDynpro so please excuse me when the question is very simple.
    I haven't found an entry concerning the Communication between two different ABAP Components that could answer my question, so I am hoping that you can help me.
    My problem is:
    I want to start a WebDynpro Component out of an other WebDynpro Component. The WD Component which will be called needs two Context Attributes and the Lead Selection of one Context Node from the calling WD Component.
    How can I do the Mapping? Or how can I pass these information to the second WD Component? I have read something about
    wdr_task=>client_window->get_parameter( 'NAME' )
    but I do not thinkt, that this works because the method exports a String...
    I would be very glad if you could help me, if it is too easy and obvious please excuse me but how I said I am new to ABAP WebDynpro =)
    Thank You
    Greetings,
    Sebastian

    Hi Ali,
    The communication between 2 iViews can be implemented using:
    1. [Portal Server-Side Events|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/developercontent/sap%20portal%20development%20kit%20for%20.net%20developer's%20Guide/PortalServerSideEventing.html]
    2. [Portal Client-Side Events|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/developercontent/sap%20portal%20development%20kit%20for%20.net%20developer's%20Guide/Portal%20Client-Side%20Eventing.html]
    There are also samples     utorials on those topics:
    1. [MapPoint |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f41fbcba-0901-0010-b98c-846cde2d9803]application that demonstrates a using of server-side events.
    2. [Tutorial|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/developercontent/sap%20portal%20development%20kit%20for%20.net%20developer's%20Guide/Client%20Side%20Events.html] that demonstrates a using of client-side events.
    Regards,
    Rima.

  • ABAP WebDynpro - Session remains open....

    Hi Experts,
    We have configured ABAP Webdynpro (SD Order Creation) iView in SAP Portal. When we test it from intranet, everything works fine and session in backend gets terminated when we leave that page on portal. But when we test it from internet, session remains open and not getting closed. How to terminate these onen sessions??
    SAP Portal and backend SAP ECC are on same domain....
    Helpful answer will be respected.....
    Thanks
    PRAMOD

    Hi Parmod,
    are you accessing the application in exactly the same way in the two cases?
    logging into portal from internet?
    One thing that you might need to be wary of is a lack of pop-ups. The portal uses a pop-up window when a user closes the browser to terminate the session.
    I've had plenty of problems with pop-up blockers that have prevented this pop-up from terminating the portal sessions. Sometime these pop-up blockers are configured to operate only on internet sites and not on internal intranet sites. That might be a possible cause.
    Cheers,
    Chris

  • ABAP WebDynPro iView: Session remains open in backend.....

    Hi Experts,
    We have configured ABAP Webdynpro (SD Order Creation) iView in SAP Portal. When we test it from intranet, everything works fine and session in backend gets terminated when we leave that page on portal. But when we test it from internet, session remains open and not getting closed. How to terminate these onen sessions??
    SAP Portal and backend SAP ECC are on same domain....
    Helpful answer will be respected.....
    Thanks
    PRAMOD

    Hi Arun,
    Thanks for the comment.
    Let me try this and will get back with result.
    Regards,
    PRAMOD

  • ABAP Webdynpro Development - Script Error when Accessing Visual Elements

    I am encountering a strange error at my client .  I can't use the Abap Webdynpro visual elements to build views .
    To reproduce the error :
    - T-code SE80
    - Open up any ABAP webdynpro component .
    - Open up one of the view  and go on Tab Layout .
    Normal Screen : You would see many WYSIWYG items ( buttons, radiobutton , text elements etcu2026. ) at the left side u2026 these elements are used to build the view .
    Here : No elements displayed and when we click on that area we get an error   . 
    Instead of the elements to get displayed .. lines are displayed and when you try to open up ( click ) the lines , an internet explorer script error stating the following occurs ( although the abap wendynpro is edited in SAP Gui ) :
    An Error has occured in the script on this page .
    Line : 1
    Char : 25
    Error : Object Required
    Code: 0
    URL : http://hdrerpdev05.bchydro.bc.ca:8100/sap/bc/wdvd/toolbar.html?_vdrespkey=4KE8FGJO3P88DO8K5XCEYHTEA&_vdframe=toolbar&usedynp=&usepat=&sap-client=100
    Anybody had had the same kind of error before ^^????
    Thanks and Best Regards !

    Hi,
    we are getting the some what related errors in SE80 -> Web Dynpro Layout
    An Error has occured in the script on this page .
    Line : 1
    Char : 1
    Error : Object Expected
    Code: 0
    URL : http://<FQDN>:8000/sap/bc/wdvd/painting.html?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=painting&sap-client=230
    An Error has occured in the script on this page .
    Line : 110
    Char : 2
    Error : Could not complete the operation due to error 80020101
    Code: 0
    URL : http://<FQDN>:8000/sap/bc/wdvd?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=no_add_ui_lib&sap-client=230
    Recently, we have upgraded our ERP system (SAP ECC 6.0 SPS17) with EHP4 SPS8. SAP_BASIS and SAP_ABA patch level same on 701_0008.
    FQDN is mantianed at icm/host_name_full parameter in system as well as in /etc/hosts file with associated system IP address.
    As suggested by  Ted Dinh,  we do not find any duplicate MIME files in our MIME Repository (SE80) and we cleared/invalidated  ICM cache many times in problem analysis.
    As suggested by  Thierno Diarra , in our affected system domain WDY_MD_UI_ELEMENT_CATEGORY is well maintained in value ranges.
    We have raised SAP OSS Message for the same, they told us to check dns server connectivity/settings with the affected system. we did the suggested DNS settings in affected system. But  still the same error message is occuring. They have suggested same sap notes like #979039 and #1009930 & #1483210 , but all the corrections/suggections/SICF service status as mentioned, are found OK in our system.
    Regards,
    Bhavik G. Shroff

  • How to call a RFC of a remote system from an ABAP webdynpro component

    Dear Experts,
    I am a newbie in ABAP Webdynpro.
    I am working on a requirement where I have a webdynpro component on ECC system.I need to call a RFC located on CRM system from my webdynpro component on the ECC system.
    How do I do that ?? Please help.
    Regards,
    Mamai.

    Calling RFC from some other system is same as local except the difference is that you have to give destination name while calling.
    And the regarding the method of calling it depends on your FM.
    if it is big RFC with complex structure, you can create the service call for it with destination given as RFC desitination.
    if it is simple straight forward RFC you can directly call it.
    for creating RFC service call call use this method
    1. Starting the Wizard
    To start the wizard, position the cursor on the Web Dynpro component to be edited in the object list at the left margin of the
    workbench window. Open its context menu and choose the entry Create->Service Call. The wizard is started and leads you
    through the creation process.
    Press Continue.
    2. Choice of Controller
    On the second dialog window of the wizard, you can choose whether the service call is to be embedded in an existing
    controller or whether a new controller is to be created for this purpose. Service calls can only always be embedded in
    global controllers u2013 that is, in the component controller or in additionally created custom controllers. It is not possible, to
    embed service calls in view controllers.
    a. Select radio button Use Existent Controller
    b. Do not change the default entry for component: <CC name>
    c. Enter for controller COMPONENTCONTROLLER
    d. Press Continue.
    3. Service Type and Service Selection
    a. You now select, which service type should be used for this service call. Select radio button Function Module. Fill the
    destination here. Press Continue.
    b. Select the service: for Function Module enter <RFC name>. Press Continue.
    4. The Required Methods and Context Elements
    On the two subsequent dialog windows, default values are listed for giving names to the context nodes and attributes
    required by the service call as well as to the required methods. The proposed names are based on the names of the
    embedded service, but you can change them as required. However, heed the respective notes in the corresponding dialog
    box.
    a. Adapt Context: Select from Nodes/Attributes . Press Continue.
    b. Specify Method Name: leave all entries as provided: Component:  Controller: COMPONENTCONTROLLER Method: EXCUTE_ Press Continue.
    5. Completing the Choice
    When you have confirmed the last dialog box, the generation is triggered. Afterwards you now have the required methods
    and contexts at your disposal for using them within your Web Dynpro component.
    or if you want to call directly the use the call statement with destination

  • Smartform & ABAP Webdynpro & Internal table

    Hi Expert,
    I am able to open the smartfrom by using ABAP Webdynpro.
    But when I try to add the table under "Global Settings -> From Interface -> Table"
    Paramemter Name       Type Assignment    Associated Type
    I_ZSG_PAY_DATA     Like                          ZSG_PAY_DATA
    It works fine when I test it in t-code SMARTFORMS. But when I use the same ABAP Webdynpro program to open this smartform, the error appear.
    "Calling Parameter incorrect"
    Could you please let me know how to fix it?
    Thanks a lot,
    WF

    Hi William,
    If you have a working smartform then you should be able to display it in WD by passign its XSTRING to the PDFSOURCE of it.
    Just check that where you have written the code to get the XSTRING of smartform in WD. You might have modified the smartform interface and forgot to call the revised FM generated after the smartform was changed in WD.
    Just re-write the entire code to generate XSTRING for smartform and see if it works or not.
    You can also try to put a break point in the code and see where exactly it is failing i.e. whether it is to do with calling smartform or converting it or WD related.
    Thanks,
    Abhishek

Maybe you are looking for