Open & Line item display-FS00

Dear All
Pls let me know the difference between for checking the Open Item Tab only & Check the Open item & line item together in FS00
Pls clarify
Thanks & Regards
Veena Kunthe

hi...........
If you check the Line item display, the line items for that account can be displayed.If you check open iten management, you will be able see line items with red and green lights as open or close and further you can clear open items in that account.
For open item management, Line item display should be checked it is mandatory.
Normally balance sheet accounts are managed on open item basis. vendor customers accounts are by default open item managed.
Recon accounts are not managed on open item basis as there line items can be seen in subledger accounts.
Regards,
Manish Jain
Pls assign point if you get satisfied.

Similar Messages

Open Line Item Management in G/L Account

FI Experts,
Our previous consultant created all G/L accounts with Line Item Display not taking into account clearing accounts. Our problem is that we now can't run G/L reports because they time out due to the amount of Line Items as Open Items because we can't clear them to only Open Line Items. I tried checking the Open Line Item Display but it does not allow me because entries are already posted.
Question,
Can anyone advise what will be the best way to fix this? Do I have to create a new G/L account with corerct settings? and then transfer the line items from one account to another? if yes how can I transfer.
Any ideas will be appreciated.
Thank You,

I found some interesting info.
I did teh following:
1- I had ABAPer create a copy of program RFSEPA02
2- I blocked the account in FS00 at Company Level
3- Then I ran the Z version program copied by ABAPer
4- Entered the G/L account, ran it in teh background
5- After completed went back and unblock account to my surprise Open Item management was flagged

Vendor line item display with internal order

In Vendor line item display is it possibe to see details of the line item of offsetting account .
For example a expense account is debited & vendor account is credited .At the time expense account debit a internal order has been assigned in line item.
User wants to see the vendor line item display ( T code FBL1N) with details of internal order appearing in open line items display etc .
Is this possible .I created a layout with order as a field but order does not show any values in the line display of vendor.
Please revert back if this can be possibe.
Thanks
Manoj

with a combination of notes
112312 - Line item - Display of offsetting ac information
373268 - Line item - new display field
569939 - Line item - Open FI - Absolute amounts
1034354 - FAGLL03 - Display of offsetting account information
you should be able to get it there.

ECC6 - Line item display and Open item management Questions.

Hi All,
For SAP ECC6, although I do not maintain line item display and open item management for Recon GL (for Debtor), I still can use FAGLB03 to view the GL balances and even Drill down to line item level by double click the value from FAGLB03 until line item level.
Questions:
Could anyone confirm whether my assumption below, true?
1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
In ECC 6
4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
Additionally, we can use FBL3N to check the line item data for NON line item display GL as well.
In SAP R/3 4.7, if not mistaken, if the GL is NOT line item display and open item management, we cannot drill down the line item reading and CANNOT use FBL3N to check the line item data.
Kindly advise on these.
Thanks.
sbmel

1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
BSIS is an open items table. You can see all GL open items there. GL's which are not open item managed can't go here
2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
Yes. Your understanding is correct
3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
Yes. In case of partial clearing data will be there in both the tables BSIS & BSAS
4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
These are New GL reports and report is based on document split object. if your document split is active at segment level then you can see line item report at segment level using FAGLL03. These reports has no link to FS00 settings.
Hope this helps

Report to Display Vendor Open Line Items

is there a report out there to display Vendor Open Line Items only for Asset Puchases??
Thank you

Dear Expert,
In FBL1N we can find the line items according to your requirement through the "Dynamic Selections" select the Particular vendor or Vendor Group for selecting a total group and , Document , Document Type select the AA Document type and Select the Open items Radio button and also you can select Open at key date enter the date up to which you want to view., And Execute.
Regards,
Shankar K B

General Ledger - Open Item Mgt/Line Item Display

Hello Experts,
GL Account was created with no tick in open item mgt and line item display. Business users posted few entries and now realised that the accunt type should be open item manageable and display should be at line item level. Going through the SDN forums, few experts suggested the workaround as follows:
1. Block for posting GL master
2. Make it zero balance in the account(clear existing trans)
3. Run program(SE38) RFSEPA01
4. Check Open Item Check box/Line Item Display
5. Unblock the GL master
6. Continue posting as normal.
However the above solution was recommended for 4.7 or earlier versions and for ECC 6, the recommendation was to open a totally new GL master with correct attributes and block the old GL master.
My client is running ECC 6.2 but requires this corrected asap and I wonder if anyone can suggest a better solution than creating a totally new GL master.
Appreciate quick resolution/advice.
Thanks
Mohammed.

Hi,
Please refer to Sapnote_0001356457_activate OIM, and it mentions in complete details how to handle OIM activation when documents are posted to it.
Regards,
SAPFICO

Fs00 line item display

hi experts. when i was creating a general account in FS00, i didn't click line item display button. and fbl3n working wrong for this account . in fs00 change menu couldnt fix my problem . is there any program to run for fix this problem?

While changing line item display at FS00 take care below
When line item display is activated, use program RFSEPA01 to retroactively generate line items from the documents that have already been posted. Before you start the program, the account must be locked for posting. When line item display is deactivated, any existing indexes may be deleted with program RFSEPA04.
Or alternatively create new GL account with line item and use
Srinivas

Segment Clearing A/c (GL account)-Line item display

In our case new GL is active with segment clearing scenario. The Segment Clearing A/c (GL) is maintained as line item display and open item. However, when we view it from FS10n, period-wise balance is there but when we click on, no line item drill down is not displayed. What is the solution to get line item display ?

Hi,
When you create Segment clearing account, line item display should not be ticked in FS00, only then you will be able to see the line item display.
There is a standard SAP not also on this issue. I dont remember the note but you can find it in service.sap.
You also do not need to keep it open item managed.
Regards,
SAPFICO

RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
The query that the jump is to be performed from an Aging query.
The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
Has anyone else out there tried this?
If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
All ideas appreciated . . .

I'm still hoping that someone can help with this issue.
Here's a repeat of the original question:
I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
The query that the jump is to be performed from an Aging query.
The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
Has anyone else out there tried this?
If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
All ideas appreciated . . .

Problem with Line Item display of G/L account

Hi,
I am struggling with a typical problem that I have two company codes in two different countries. I have created a tax account with Open Item management and Line Item display in both the company codes.
When I am trying to post vendor invoices, taxes are being posted on line item wise in one company code but not doing so in other company code eventhough the attributes of the G/L account are same.
G/L accounts, tax condition types and account keys are same in both the cases.
Can any body give me an idea to fix the problem.
thanks in advance,
Mallik

HI,
check the condition types you've defined for the both of the countries
sprofin accting-f/a gl sett-tax on sales/pur -basic settings-check cal procd--define cond types
there is a check box named item condition see whether it is ticked for the another company's condn type.
because due to this only it takes the condn item wise.
reward pts if it helps.
Regards

Vendor Open Line Item Report

is there a report out there to display Vendor Open Line Items only for Asset Puchases??
Thank you

When you purchase an asset, How does your transaction look?
Like for example, when you use transaction code F-90 with vendor accounting entry will look like
31 (Credit Vendor) - 100USD - Account Type 'K' (Vendor)
70 (Debit Asset) - 100 USD - Account Type 'A' (Asset)
As you can see above, for my Vendor line item, the off-setting entry was done to a fixed asset which will have account type A. That is why I asked for entering account type "A" in your report to show up only those line items which have an offsetting entry to a fixed asset.
So, it depends on how your acquisition transaction looks like. There has to be something field that differentiates open items related to asset transactions with other regular transactions like document type, reference, etc... which you can use to isolate asset related open items.
Shail

FI-AR Comments/attachement on open line items (Notes)

HI Experts,
My client has the requirement to update some comments/notes/attachment on customer open line items.
Like example receivable clerk done some follow-up with customer on particular invoice and hence he wanted to document this follow-up information notes or attached document on that open item invoice, so that others get last follow-up information from system.
Also client is looking for some kind of functionality in such a way that user should get some kind of indication that there some notes on open items. (something like icon/symbol on line items)
Looking for your experience and assistance
Thanks & Regards,
prashant rane

You can attach the documents and any notes for the invoices. if you want to add attachment you can Click Services for Object button >> Create attachment: In either the document overview or the line item display, click the Services for Object button and select Create >> Create attachment. Over there you can add the attachment and if you want to add any symbol or icon you've to contact ABAPers or technical team.

Customer number needed in "GL a/c line item display" for customer gl?

Hi SAP Experts,
while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
How can i solve this problem?
Plz guide me.
I need a quick response.
Regards,
Biswa

Hi,
Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
I hope these helps.
Regards
Ravinagh Boni

No line item display in FAGLL03 & FBL3N GL line Item reports

Dear All,
I have parked the customer invoices with normal customer recon account and with special GL indicators. The system do not display parked lines for Special GL indicators. How can i display the line item display information in FAGLL03 and in FBL3n report.
Following settings have already been made are;
1. Fs00 = line item display check is on.
2. In initial screen for FAGLL03 & FBL3N Selection: Parked Items Parked items are displayed and checked.
The only information for parked special gl line items is get through FBL5N report only.
Kindly suggest in there any way that we can get report from GL line Item reports???
Regards

Some how client do not want the functionality

Vendor Line Item Display (FBL1N)

Hi,
I would like to prepare a new layout for transaction FBL1N (Vendor Line Item Display).
I only want to see a summarized view of the open line items per Profit Center.
How can I change the summation levels?
Thanks.
Kind regards,
Linda

Please note that most vendor line items wont have a PC assigned to them.
I am not sure if you are refering to classic view or new GL data.
Anyway you can use the sum button, and sub total for your levels.
If you want to get the information sub totalled by PC, then I guess you are using the new GL and document splitting.
If that is the case you cannot use FBL1N for this.
There is however a set of reports in Accounts Payable, called new Gl reports and they will provide you the general ledger view and not the entry level view, and you can use the sum and sub total option.
Please award points if this is useful.
Come back if you need further help.

Open & Line item display-FS00

Similar Messages

Maybe you are looking for