Open links by click withot using the cmd-button

I am sad about it, that Apple has not yet implemented the feature to open new sites in a new tab just by ckicking the desired link -- you still have to use the cmd-button. that's not that intuitive.
Ich finde es panne, daß es Apple noch immer nicht geschafft hat, daß man die Einstellungen dahingehend verändern kann, daß LInks per Klick gleich in einem neuen Tab im aktuellen Fenster geöffnet werden.
Dazu muß man nach wie vor die Befehlstaste gedrückt halten.

What I would try is accessing that mailbox through some other route and deleting the message from there. It sounds like that message is simply corrupted in some way.

Similar Messages

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

Everytime I open a new window to browse, in this new window I would right click to open link in new tab but the new tab always shows up in the other window.

I would click a link which opens a new window. Then in this new window, I would right click to open link in new tab. The new tab does not show up in this new window. It instead shows up in the original browser window. How can I make the new tab show up in the same window?

Firefox did have a behavior where some new windows -- those considered to be dialogs -- could not have new tabs, so new tabs were diverted to the window from which the dialog was opened.
According to the bug tracking system, a fix is in the works:
[https://bugzilla.mozilla.org/show_bug.cgi?id=644729 644729 – Popup window with all toolbars visible causes new tabs to open in another browser window] referencing [https://bugzilla.mozilla.org/show_bug.cgi?id=485237 485237 – Need to treat popups consistently].
That second ones says Target Milestone: Firefox 12, so the fix probably didn't make it into Firefox 11.
WORKAROUNDS
That first bug says there is an add-on to work around this -- it enables the middle mouse button to open links in a dialog window: [https://addons.mozilla.org/en-US/firefox/addon/bug-586234-unfixer/ Bug 586234 Unfixer :: Add-ons for Firefox]. I haven't tried it myself.
Old forum thread cross-reference: [https://support.mozilla.org/en-US/questions/824649 When I open a new tab it opens in the wrong window | Firefox Support Forum | Firefox Help]

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

Problem with the cmd-tab keyboard shortcut now cured with the latest software update, so the original problem must have been a software glitch.

"Open link in new tab" in the shortcut menu

When right-click on a link, "open link in new tab" appears as the 2nd after "open link in new window" with the old versions. Now in Firefox 4, it reversed; which is annoying and inconvenient. Is there a way to change it back? Thanks.

2 Solutions found in [http://support.mozilla.com/en-US/questions/791244]
the user cor-el has a method that does not require any add-ons. He States
This code in userChrome.css will move "Open Link in New Window" to the top of the context menu.
<pre>@namespace url("<a href="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul">http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul</a>"); /* only needed once */
#contentAreaContextMenu > * { -moz-box-ordinal-group: 2; }
#context-openlink { -moz-box-ordinal-group: 1 !important; }</pre>
the user jay_ff shows how to do it using the Menu Editor Add-on
1. Install the Menu Editor add-on from https://addons.mozilla.org/en-US/firefox/addon/menu-editor/ .
2. After the installation, go to Firefox> add-ons (or simply use Ctrl+Shift+A)
3. Go to the Menu Editor "Options"
4. In the "Main context menu," simply grab the "Open link in New Tab" and place it below the "Open Link in New Window"
5. and Voila! You may also change other menu options if you want to!
I tried jay_ff method first and found that indeed changing the Main Context Menu did cause the hotlink context menu to change as well.

My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll

* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

How to enable private mode from commandline, with an URL. I am a software dev and I wish to have my application open links in Firefox. Using ShellExecute(), i c

How to enable private mode from commandline, with an URL.
I am a software dev and I wish to have my application open links in Firefox.
Using ShellExecute(), i can do with with commandlines like:
firefox.exe http://support.mozilla.org
But I also want the option to open the link in private mode.
I am able to start firefox in private mode by doing this:
firefox.exe -private
However, if I add a link to the command line
firefox.exe -private http://support.mozilla.org
I get strange results.
If firefox is not running, it launches 2 copies of the application.
One that opens in private mode and the other opens in normal mode and goes to the URL specified.
If firefox is already running, it just opens the URL in a new tab.
No private mode instance is launched.
Am I using the command-line syntax incorrectly?

It will never work if Firefox is already running as Firefox will use the already opened Firefox instance. 
In that case only using a separate profile will work.
You can try to specify the -url switch as well.
*firefox.exe -private -url http://support.mozilla.org
You can also look at the -new-tab switch.
*firefox.exe -private -new-tab http://support.mozilla.org
*https://developer.mozilla.org/en/Command_Line_Options

How to open link in new tab using Spry?

Does anyone know how to open menu web links in a new tab
(instead of opening a new window - IE7) using the Spry horizontal
dropdown menu? I tried putting "_tab" in the target field but it
doesn't seem to work. Thanks!

drstall wrote:
> Does anyone know how to open menu web links in a new tab
(instead of opening a
> new window - IE7) using the Spry horizontal dropdown
menu? I tried putting
> "_tab" in the target field but it doesn't seem to work.
Thanks!
Opening new windows in a new tab is a setting within the IE7
preferences ( and I'd assume 8 too ) and as far as I'm aware there
is no control over this setting from within the HTML/JavaScript of
the web page to do what you are asking. If you use _blank and the
user has the appropriate setting in their browser, then it will
open in a new tab, not in a new window.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Yahoo Pool from within open chat box crashing when using the mimimize butto

While using my version 5 update 6 SUN java and while playing yahoo pool in an open chat box I frequently need to use the minimize button. This causes a "crash" (read:program not responding) everytime!. I have done every tweak possible to my system using a PENT III with 512k of ram and a fresh install of XP with all the latest updates. This includes all the updated drivers and no video card acceleration. Regardless of what I do, that yahoo pool within the open chat box will CRASH when the minimize button is clicked. I have had to remove my SUN Java and reinstall the old windows VM. Now, my problems are gona and I am enjoying Yahoo pool from within the open chat box with no problems. Please advise.

I'm also seeing this issue. We have a batch of new IR5000 and IR7000s with Fiery controllers. The batch before this didn't have the issue. Now the printers will randomly lock up and require a reboot to bring it back online. This is happening across multiple machines. We are still using a combination of the A1/B1 and are slowly migrating to the A2/B2 drivers. All of them print fine but wondering if the old drivers are part of the issue. One thing I'm looking into is the old printers were served from a 2008R2 PServe and the new ones are being served off of 2012R2. Considering the driver isolation options as a potential fix. I also think our firewall filtering may be an issue. We filter lots of content and that can hang IE when it tries to render content for the print job. Printing www.google.com works fine, but any content heavy site such as msn.com lags or stalls because of all the content those type of pages load up.
Would love to know if you found some good info. A suggestion to Canon. The "Hey we just make it, talk to the people that sell it for support" does not build customer loyalty or confidence.

The update itunes update software box comes up when I open itunes, I click to download the box disappears and it never starts the download. Whats wrong?

The update itunes software box comes up when I open itunes, I click to download, the box disappears and it never starts the download. Whats wrong?

You might not have enough space left on your hardrive.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
This problems has been occurring on two different machines over the last two days.

I think this may not be a browser problem but rather a Google problem.
I am getting the same problem with the Google Chrome browser.

No pdf documents are listed to open when I try to use the XI Pro, it only shows folders

No pdf documents are listed to open when I try to use the XI Pro, it only shows folders

not sure what that means, I downloaded the program and when I try to open any file it only shows me folders

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.

Hi,
I have installed Solaris studio and wanted to use the memory analyzer from there. I am trying it on a sample program, but it returns the above error and does not instrument the executable. Could you please help me tracing where am I going wrong.
# which cc
/opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc
# /opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc -V
cc: Sun C 5.12 SunOS_sparc 2011/11/16
# cc -g -O2 test.c
# file a.out
a.out: ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped
# ldd ./a.out
 libc.so.1 => /usr/lib/libc.so.1
 libm.so.2 => /usr/lib/libm.so.2
 /platform/SUNW,Sun-Blade-1500/lib/libc_psr.so.1
# /SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/discover -w - ./a.out
discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.
Regards,
Vikkal

ok. Thanks for the info.
Could you check if a small test works on your system ?
You could use this test :
% cat a.c
#include <stdio.h>
#include <stdlib.h>
int main()
 int *x = (int*)malloc(100);
 printf("x[0]=%d\n", x[0]);
 return 0;
% cc a.c -g -xannotate
% discover -w - -o a.out.disc a.out
% ./a.out.disc
ERROR 1 (UMR): accessing uninitialized data "*x" at address 0x8090008 (4 bytes) on the heap at:
 main() + 0xc2 <a.c:8>
 5: {
 6: int *x = (int*)malloc(100);
 7:
 8:=> printf("x[0]=%d\n", x[0]);
 9:
 10: return 0;
 11: }
 _start() + 0x71
 was allocated at (100 bytes):
 main() + 0x5e <a.c:6>
 3:
 4: int main()
 5: {
 6:=> int *x = (int*)malloc(100);
 7:
 8: printf("x[0]=%d\n", x[0]);
 9:
 _start() + 0x71
x[0]=0
***************** Discover Memory Report *****************
1 allocation at 1 location left on the heap with a total size of 100 bytes
 LEAK 1: 1 allocation with total size of 100 bytes
 main() + 0x5e <a.c:6>
 3:
 4: int main()
 5: {
 6:=> int *x = (int*)malloc(100);
 7:
 8: printf("x[0]=%d\n", x[0]);
 9:
 _start() + 0x71
DISCOVER SUMMARY:
 unique errors : 1 (1 total)
 unique warnings : 0 (0 total)

I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut down the computer?

I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut the computer down.
How do you delete programs?
thanks

If Flash Player is indeed the problem I would suggest using the Adobe Uninstaller.
Have you tried using a different browser such as Chrome, Firefox or Safari to see if they have a problem with Flash?

Open links by click withot using the cmd-button

Similar Messages

Maybe you are looking for