Open more times Camera RAW in After Effects (CC)

Open more times Camera RAW in After Effects (CC)Hallo everybody, I'm importing .dng files in AE and the first time AE opens Camera RAW automatically. But if you want to edit again DNG sequence in Camera RAW. how can you make it?
thx for reply!

Hi!
I don't think you can get the points via scripting as they're not individual parameters. They must be stored in the plugin as "custom data", which is opaque...
What do you need them for? Cos', for example, you could convert the points you need to Nulls (or Solids) and get the position data from there...
Cheers,
François

Similar Messages

CS5 not responding after opening Bridge and Camera Raw

I have been using bridge, camera raw and cs5 since it was released. I have not any problems until this morning. I am able to open Bridge and Camera Raw, but when trying to open PS CS5, it does not respond?
Any suggestions?

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Can't open files in Camera Raw while in Bridge CS6

05/30/2014
Believe this issue/problem happened after automatic update from Adobe (but can't be sure).
Have always uploaded files from camera into Bridge then do some editing by opening JPEG and RAW (NEF) files in Camera Raw from Bridge.
Now, "Open in Camera Raw" is greyed out and I am unable to find a way to open files with Camera Raw from inside Bridge CS6. This seemed to happen suddenly and without any new software or applications being added to computer. All other apps/software working well.
Have tried various fixes found on Adobe community discussions without success. Problem now ongoing for over a week +.
Am able to open files in Photoshop with no problem but want to be able to do some quick edits using Camera Raw opening files from Bridge CS6.
I'm using Bridge CS6 Version 5.0.2.4. (as part of Adobe Creative Suite 6). Updater states I have most current version of Bridge installed.
I'm using an iMac computer with Intel Core i7 processor
OS X 10.8.5
Have found others with this same or very similar problems on forums but either can't understand patches/directions or unable to complete instructions on my computer.
for example see: Camera RAW update issue with Bridge CS6
From that link/discussion, one finds this "solution":
After you update to Camera Raw 8.4, Bridge CS6 in Mac OS doesn't display image metadata or allow you to edit images in Camera Raw.
To the top
Manually install the Camera Raw 8.4 plug-in.
Exit Adobe Bridge.
Download the file below.
Locate and double-click the downloaded file to decompress it. The resulting file is Camera Raw.plugin.
Navigate to the Macintosh HD folder.
Open the Library/Application Support/Adobe/Plug-Ins/CS6/File Formats folder.
IMPORTANT: Navigate to the root Library folder on your hard disk, not the Library folder under your user folder.
Copy the Camera Raw.plugin from step 3 into the File Formats folder.
IMPORTANT: This new file overwrites the file already in this folder. It's important that only one Camera Raw.plugin file is in this folder.
Open Adobe Bridge.
Camera Raw.plugin.zip
Mac OS Camera Raw 8.4 plug-in for manual installation
However, when I try the above, I have these issues:
1. When I double click on the downloaded file, my computer opens PhotoShop and an error message is displayed that states "Could not complete your request because Photoshop does not recognize this type of file." (I suspect this may mean my computer has automatically decompressed the file, but I am not certain of that).
2. Not completely certain I know how to "Navigate to the Macintosh HD folder" as suggested in step 4. above (OK, I'm new to Mac; long-time PC user….)
3. When I am in "Finder" and click on "GO" while holding down "Option" key, I find "Library". within that, I can find "Library/Application Support/Adobe" but there is no "Plug-Ins" folder within the "Adobe" subfolder.
4. Not sure how to tell if I am in the "root Library" on my hard disk vs. "Library under my user folder". (Again, new to Mac….)
I have NOT yet tried doing an "Uninstall" and then Re-installing the whole Adobe Creative Suite 6 and would like to avoid that if possible.
Would absolutely LOVE it if Adobe would simply push an update that would fix this problem or if someone would explain to me how I could restore the earlier version that worked perfectly for me.
Any help, suggestions (in very basic, simple terms that any idiot new to the world of Macintosh can understand) would be appreciated. Very frustrated with Adobe at the moment.
Mostly have liked the switch to Mac, but with this and my photo workflow coming to a screeching halt, having second thoughts. (But I suppose Adobe update for PC may cause problems as well.)
Thanks in advance for any help/suggestions.

05/30/2014
Literally minutes after I posted the above, I figured this out myself and now I'm a happy camper and things are back to normal!
Here was my error/issue: as a new Mac user, I was not negotiating/finding files on my hard drive correctly.
In case there are others out there with this same issue (and as dense as I apparently am ):
Here is what I did that resulted in a fix:
First Steps:
1. Quit/close Bridge
2. As noted in post above, go to this link to download Camera Raw Plugin file:
Camera RAW update issue with Bridge CS6
Link to get to download is near end of instructions, but I will attempt to insert that link to download here:
Camera Raw.plugin.zip
3. Once file has been downloaded, find it by using "Finder" Click on "Finder" and look on list of options on left side of Finder window to find "Downloads". On my computer, when clicking on "Finder" these options appear in the list at the left:
All My Files
Airdrop
Applications
Desktop
Documents
Downloads
Movies
Music
Pictures
4. Download you just did should be at or near the top of your downloads list and should be named as "Camera Raw.plugin" and will be 83.5 MB in size
5. I right-clicked (two fingers on touchpad) to bring up drop down options and selected "Copy 'Camera Raw.plugin'" from that list to copy file.
Now, you have copied the plug in that will fix this issue. The second set of steps below will walk you through how to replace the file that is on your hard drive with this plug in file that you have copied.
Second set of steps (and this is where, as a new Mac user, I was confused initially)
1. Again, click on "Finder" on your Mac
2. On top of screen, find "GO" and click on that. (You should see "Finder" in the upper right corner of your screen, then "File, Edit, View, GO, Window, Help" Click on the GO
3. In drop down menu that appears, click on "Computer"
4. Then, double click on "Macintosh HD" to open your hard drive
5. Next, double click on "Library" folder to open that.
6. Next, click on "Application Support" folder to open that.
7. Then, double click on "Adobe" folder to open that.
8. Then, double click on "Plug Ins" folder to open that
9. Now, double click on "CS6" to open that folder.
10. Finally, double click on the "File Formats" folder that appears.
11. NOW, you should see this:
12. Right click (two finger press if using a touch pad) to open window with options. Select "Paste Item" by clicking on that option.
13. You will be prompted with an option to keep existing file OR replace the file. Choose "Replace" to past the new "Camera Raw.plugin" file to this folder.
Finally, if you now go back and open Bridge CS6, you should be good to go.
Hope that helps someone out there.
Hopefully future updates will from Adobe will be better.

Unable to open image in camera raw in CS3

I have CS3 and I'm unable to open images in camera raw. I updated to 4.6 but it hasn't helped, and I've tried suggestions such as "open as" and then "formats" and choosing "camera raw"...still doesn't work. Adobe is not able to help me over the phone due to the older version of Photoshop...any thoughts or help? Thanks so much.

A critical piece of information would be what camera model the RAW images you're trying to open are from.
Each model camera must be supported specifically in Camera RAW. If your camera is newer than the latest ACR version available for your Photoshop version then you'll be unable to open the RAW files in ACR.
Three solutions are:
Use the latest version of the free DNG Converter from Adobe Updates < http://www.adobe.com/downloads/updates > to convert each RAW file to a DNG and then that DNG will be openable in the older ACR version. You may need to change the ACR-version compatibility setting in the DNG Converter. This solution is free but doubles your storage space if you keep your original RAW plus the DNGs.
Buy Lightroom (which is less than half the price of Photoshop) and continue to use your older Photoshop with it. The adjustments you do in LR are the same as you'd be able to do in ACR (actually more because the newest version of LR and ACR have more adjustments)
Upgrade to or buy the latest version of Photoshop, depending on your upgrade availability.
I personally have both Lightroom and Photoshop and use LR 90% of the time.

Procedure for opening jpegs in Camera RAW

I am helping a friend who is running Elements 6 on an iMac. I can't seem to find the setup which will allow him to open jpegs in Camera RAW.
I know this must be simple but I'm having trouble. Thanks for your help.
Mary Lou

Barbara, while I have your attention, one of my struggles is that my students are partly working on a Mac and some on a PC and Elements isn't identical on both platforms.
I frequently use the slideshow in Bridge on my Mac. I took the time to watch a tutorial in Elements 7 working from Organizer. It has so many more options than slideshow on a Mac. Can PC users access it from the Organizer even if they aren't currently using the Organizer? I normally teach students to control their downloads by placing images in specific folders, either in Pictures or on an external hard drive. Will the Organizer still be available for viewing a folder of images stored elsewhere?
Thanks,
Mary Lou

Loss of thumbnails of RAW images in Photoshop prior to opening them in Camera Raw

I recently purchased and started using a Canon EOS 7D Mark II. I found that with my Photoshop CS6 I was unable to open my RAW files in Camera Raw, so I downloaded an update of Camera Raw, viz. version 8.7.1 from the Adobe website. Now I can open the RAW images from my new camera in Camera Raw. However, I have lost the capacity to display a thumbnail image of a RAW file when using the open function of the file drop down menu in Photoshop. Now when I single-click on an ID number of a RAW image from the list of images, I see only a blank thumbnail. I save lots of time using image thumbnails for selecting images for editing in Camera Raw. Is there some way to restore the ability to see RAW image thumbnails in Photoshop prior to opening images in Camera Raw?

Which operating system are you using?
Are the blank thumbnails only for the files from the canon EOS 7D Mark II camera?
An alternative is to use Bridge CS6 or Mini Bridge to see the photos before you open them in photoshop cs6.

How to open filmstrip in camera raw 7.3

I am unable to open filmstrip in camera raw 7.3, using photoshop CS6 and macbookoro/retina screen. help katy

[email protected] wrote:
There is no toggle switch on the left out line to open a filmstrip with. Thanks katy
It's not a "toggle" it's UI tool for changing the spacing of the film strip panel...see the following:
The image above is ACR with 6-or7 images selected but with the left film strip panel collapsed...
Note the panel adjustment tool...
After dragging the panel slider to the right, the hidden film strip panel is visible...

Opening in adobe camera raw??

Some times I want to open in adobe camera raw and then have the changes automaticly applied back in aperture with out having to save and export the file. I thought I would be smart and have bridge be my external file editor but then when I am done I do not see the changes in aperture

Not possible to do it automatically. Aperture uses a different RAW processor than ACR. If you want to process in ACR then you can save out of it as a TIFF or PSD and manually import that file into Aperture.

Opening photos in Camera Raw format

I need to open my photos for the project I am working on in camera raw format to access the editing options I need. I repeat the same steps but they only open up in that format about half the time. Does anyone have an idea about what I am doing wrong?

Thank you David. Yes, I absolutely agree. It is an amazing resource - especially someone new to it and feeling a little overwhelmed.
They are jpeg photos that have been forwarded to me that I am then trying to Open As in camera raw format so that I can reduce the noise and get them ready to be displayed on a website. What has me bumfuzzled is that sometimes it works perfectly, sometimes it works if I try it a few times in a row and sometimes it just doesn't. ? So I thought there must be a different way to approach the access that I haven't found yet. One thing I thought of since my last post, but haven't had a chance to try, is that I am pulling these files out of my Windows Pictures rather than uploading them to pse first. Do you think that would make a difference?

Problem reading camera raw files after I reinstalled LR4.

Now can't read Nikon 5200 camera raw (nef) files in Develop Mode. Could do so before. Any suggestions?

Thank you all!!!! I was successful in updating!!!!! Appreciate your assistance!
Date: Sun, 3 Nov 2013 06:35:19 -0800
From: [email protected]
To: [email protected]
Subject: Problem reading camera raw files after I reinstalled LR4.
    Re: Problem reading camera raw files after I reinstalled LR4.
    created by JimHess in Photoshop Lightroom - View the full discussion
The file that you downloaded is a self-contained running application that installs the update on your computer. After you download that file, you need to double-click on it and follow the prompts to install it. After it has completed you will have Lightroom 4.4 installed and it will be ready to run. If you are on a Windows computer, the installation will replace your 4.1 installation. If you are on a Mac then you will have both versions installed and you will have to be sure you start the right one.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5810683#5810683
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5810683#5810683
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5810683#5810683. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When opening an image Photoshop Elements 12 is opening it in Camera Raw, it is not a RAW image and it is cropped How do I uncrop the opened image?

When I am opening a .jpg image not an actual raw camera image from Elements 12 it is being opened as a camera Raw image and the image is cropped, I can't find anyway to get the image to uncrop or zoom out so that the entire image is visible so that I can actually edit it to something that is useable. The images were taken with an iPad and copied I suspect using the organizer from Elements 11 but I can't be sure. If I could just uncrop the opened image so that the entire image is visible this would not be a big deal.
Is there a way to uncrop the image that is being opened by Camera Raw? Am I going to have to get my hands on the source of the images (the iPad) and copy the images again using explorer and not let them be copied with the organizer?

Uncheck the boxes at the bottom of the dialog Scale styles and resample Image so that only constrain proportions is checked. If you the change the resolution box from 240 to 300 you will get back to your original dimensions.
This is a meaningless thing to do, you still have the exact same number of pixels, you have only changed the metadata number in the file for ppi, and your prints are not affected by this number.
You could also use the same method to change the dimensions to 6 x 4 or 9 x 6 etc.
There are some cases (actually most cases) where you need to CROP the photo to change the dimensions, when the aspect ratio of the original photos is different than the aspect ratio of the final photo; the specific case in 99jon's example is the only case you ever want to change dimensions using Image->Resize->Image Size, where the aspect ratio doesn't change from 6x4 to 9x6 (or 12x8 or 18x12 or ...), and even then, you could do the same thing simply by telling the printer the size you want, you don't really need to do anything in PSE.

How to open more than one RAW-File by drag&drop/doubleclick with CS2?

Hello,
is it possible to open more than one RAW-file from iPhoto with Photoshop's RAW-converter in just one single step? If I drag&drop my selection to my Photoshop-Icon, PS opens just the iPhoto-created library-JPGs of the RAW-files but not the RAWs itself (I've turned out the copyying of the imported photos to the iPhoto-library. Instead iPhoto seems to create a JPG for the library from every RAW I import). If I doubleclick a selection of RAWs in iPhoto just the doubleclicked RAW-File will be opened in Photoshop. Is it possible to select more than one RAW-file in iPhoto and get Photoshop to open all the selected RAWs but not the JPGs? It would make my work a lot easier... thank you.
rockenbaby

hello
try selecting the photos that you want however many- go, File then Export.
you can make all your file selections image size etc and then save them direct to your PS file.
hope this helps.
cjp

How to stop CS4 opening JPEGs in Camera Raw?

Hi guys,
I'm hoping someone out there can help. Recently for some reason CS4 decided it wanted to open all JPEGs in Camera Raw.
I am trying to restore whatever setting has changed so JPEGs open directly in Photoshop not Camera Raw.
And before anyone states the obvious yes, I have deselected "Open JPEGs in Camera Raw" under Camera Raw prefs.
I am on a mac (OS X 10.5.7) and have installed the latest updates for CS4 (Camera Raw is version 5.0.0.178).
Any (constructive) input would be welcome. Cheers.

Generally, once a JPG has been opened in ACR and has an embedded adjustment
recipe it will continue to be opened in ACR even though you have the
preference set to not prefer ACR for JPGs.
Your verbiage is different than what I see for Camera RAW Preferences in ACR
5.4 on Windows, so maybe you need to update to the latest ACR or maybe Mac
and PC versions of ACR are different.
In my CS4 Extended (11.0.1) / Edit / Preferences / Camera RAW preferences
for ACR 5.4, down at the bottom, you can set JPG and TIFF Handling - JPEG to
Disable JPEG Support instead of Automatically open JPEGs with Settings to
make it ignore the settings in JPEG and/or TIFF files.

I can't preview RAW files in Bridge CS5 or open them in Camera Raw

I've been using Photoshop CS5, Bridge and Camera Raw 6.7 with no problems whatsoever. I recently upgraded the OS on my MacBook Pro to 10.8.5 and can no longer preview RAW files in Bridge, or open them in Camera Raw.
I've downloaded the Adobe DNG converter, but would much prefer to using my existing workflow if possible.
Any suggestions? Thanks in advance for any help!

Adobe doesn't support CS5, an when I spoke to Apple, I was told that this is a known issue with OS 10.8.5 and that they're working on a patch. In the meantime I'm using Adobe's DNG as a workaround.
Have not heard before of this Known Issue, also find it hard to believe being true. But can't test my self because I only have CS6 and CC installed and always use Photodownloader to convert to DNG upon import. I have just installed the 10.8.5 update and checked in Bridge CC pointing to an attached card reader. no problem in showing the CR2 thumbs, it works as always and as expected.
To my knowledge Bridge CS5 is already 64 bits and I can't think of any valid reason why an OS update would cause this problem so suddenly (but I'm not a technician I have to confess…)
However, I would first try a check and repair permissions from Apple Disk Utility and also try Cocktail (good and cheap 3th party maintenance application for Mac) to clear caches and check permissions.
Also try a new user account just for testing to rule out your current account as the culprit.

How do I open jpegs in Camera Raw?

I can't seem to find any instruction on how to open jpegs in Camera Raw. It says that it will do it, but I haven't found the way to do it. Command R is never highlighted when I'm in Bridge and click on a jpeg. Help!
Thank you,
Gregg

I am encountering the same problem in Bridge. Although I marked the preference to open jpeg in Camera Raw. Everytime SC3 opens with the picture.
In early July I folowwed a thread discussing the same problem - without solution. Could it be that this is a bug in Bridge and hopefully Adobe is working on an update?

Open more times Camera RAW in After Effects (CC)

Similar Messages

Maybe you are looking for