Open NAT on PS3...

How do I get an open NAT for my PS3? I have an E2000 and only have moderate NAT.

Try Forwarding ports on your router. try these ports:
UDP  : 3658, 3478, 3074, 3075
TCP  : 80, 443, 5223
For steps how to do it, follow this LINK

Similar Messages

  • WRT120N How to open NAT type PS3 !!!!

    Hi i have a WRT120N router.
    it goes alrite in connection wise but for my ps3 my nat type is strict which wont let me join
    in some of my mate's partie's or host a game. And i REALLY wanna fix it by opening my nat
    i've bascially tried everything portforwading but when you save it when portforwarding, it doesn't save like it look's like on the
    video's i have seen on youtube. Uhm iv'e done that DMZ thing which also didnt work.
    iv'e bascially done everything on youtube and other site's
    Im just wondering if it's just the router. Or just the way i have it all setup because my router is setup in
    a different room with the computer which is hooked up with the modem and my ps3 is in my room which is a different room and is just connected threw WiFi my connection on the ps3 is wireless obviously. Should i buy a new router or just ring a linksey person ? .it's getting to that point.
    And yeah i just wanna get it to open HELP PLEASE !!!!!
    GriMxDRiFT3r.

    Hi - I think you are wanting to connect your PS3 with an internet cable and go wired , rather than wireless.  Going online means being connected to the internet which you have done already only your PS3 and you router have done this wirelessly.
    You need to connect your router to your PS3 with a Cat 5 cable - standard ethernet cable, then look at your network settings on your PS3 - set these to a wired connection and choose the auto and default settings through the next pages and see how that works.  It was really straighforward when I set mine up.
    Hope this helps

  • Open NAT Type help ( CISCO WRV210 )

    Hello, can anyone help me open my NAT Type? it says my NAT Types : 2 and that it is Moderate,i really really really want to open it , I Tried going to the Small Business webpage and I Couldn't find anything that's why I came back here, could anynone help me?
    My main priority is to open NAT on PS3, Doesn't matter for PC but only PS3, I Tried putting my PS3 and into DMZ With and without UPnP Enable and nothing changed, could anyone please help me?

    tell me how i can post the same thing there and i will give you some Kudo

  • How to open NAT for Linksys E1000 on PS3?

    question in title:
    it seems as though my gameplay on my ps3 has been very THICK(lag and delay on screen), I have tried changing the MTU and some other options and I already notice the difference but i think I can maximize my lag-free gaming if I completely open up NAT on my PS3.
    Does anyone have a great guide that works?
    Also would changing the MTU/ Disabling UPnP and unchecking anonymous internet requests effect my Download/Upload speeds or anything else, or does it just help fix gaming lag?
    Input towards topic and questions i've mentioned will be greatly appreciated,
    Thanks.
    Greg 

    disabling the WMM has something to do with the support you get from the servers  and from i was told that's not needed to be enbled it should be disabled, and by the way the linksys support team explained it's better disabled instead of enabled and it wouldn't hurt to get a actual gaming router .. i went with the E3000 and i ended up having to ship it back  for some defective that i didnt even cause, i would look into a actual gaming router that supports gaming like the e3000 or the e3200 , it should said for gaming consles or something like that but i will totally look into your problem personally and go from there! intil then i would try to get in contact with playstation gaming system and  figure out what ps3 ports are so you can go from there - there should be a way to test the nat type (there  3 nat type's on playstation 3 )  there's nat type 3, there is nat type 2 (which is open)  and there is nat type 1 and the one we want is the nat type 2 i believe, which means open nat type (meaning plug and play enabled and open ports  on the router )

  • How to Open NAT Type on PS3?

    How do i open NAT Type on PS3
    Need help

    When you run the network test on the PS3 what is shown?  what NAt type?

  • WRT54G2V1 Need Open NAT for Destiny PS3

    I currently have a Linksys WRT54G2V router. My Playstation3 has a wired connection to my router. With my current settings when I play Destiny on my PS3 I have a moderate NAT, and would like an open NAT. My ISP is Charter Communications. I do get a public IP through to my router, and have tried portforwarding. Am i missing anthing? Do i just need a better router?

    Internet Service Provider and Modem Configurations
    What ISP Service do you have? Cable or DSL?
    What ISP Modem Mfr. and model # do you have?
    What ISP Modem service link speeds UP and Down do you have?
    Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
    Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
    If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://computer.howstuffworks.com/nat.htm If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.

  • Linksys E2000 (2 Xbox 360's and 1 PS3) Open Nat Problem

    Hi everyone,
    I recently bought the Linksys E2000 for my house so i could enjoy wireless internet. The problem is i have two Xbox 360s which one is wired and the other wireless. It seems that i can't have both Xboxs with OPEN NAT and whichever one connects to the router first is the one to have OPEN NAT no matter what. This leaves the other Xbox with MODERATE or STRICT. Is there a way to have both open at the same time? If anybody knows help would be appreciated! Thanks
    **I have a PS3 also connected wirelessly, but that one is always OPEN. Didn't know if that would affect my PS3's NAT if i were to change the setting on my router.

    Here's a checklist. Got it here.

  • 2 PS3's connection problems/ How do I get open Nat on 2 PS3s.

    I am having problems with the connection on my ps3's. Me and my brother both have seperate ps3's. We play call of duty mw3 together. When we are both online and playing we have problems. We both are in the same party and we try to join games but we can never join any. When we are both online, One of the ps3's has an Open NAT and the other ps3 has a moderate NAT or a strict NAT. When only one of us is playing everything is fine.
    I want to know how can I make both of them have Open NATs and how can I fix this problem I have. I have an extra router as well. Any help would be great. Thanks!

    Do This first, 
    How to setup the MI424WR Verizon FiOS Router for multiplayer gaming with the Wii and Xbox gaming con...
    And then Do one of the two below.  
    How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router
    How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router
    Keep in mind that your username should be admin and your password should be the serial number on the service sticker of your router.  That is located under the bar code, and it IS case sensitive.  

  • 2 xboxes or ps3's with open nat for the rv042? yes i can!

    i signed up specifically to tell future and current rv042 users that after a year of muckin' around with this fairly advanced networking technology, i've finally discovered how to open the nat types of 2 xboxes, instead of one being open and all others being moderate or strict. i'll break it down simply, 3074 port forwarded for the one, and dmz host for the other one. i couldn't figure out for the life of me, why the dmz host wouldn't open the nat type of the 2nd xbox at first, thats when it dawned on me that xboxes aren't capable of understanding the rv042 dmz host. so i tested the dmz host on my computer and it worked, putting my computer wide open to all ports on the internet. so what i tried was internet connection sharing, plugging my xbox wired into my computer which is set as the dmz host. i was all excited, jumping up and down for joy when i had succeeded in what took me an entire year to figure out. why so happy, do you ask? i don't think all of you know just how painful it is to not be able to open the same port more than once on the same network, very, very, aggravating. if you are having the same problem and don't understand how to do what i've explained, just ask. i cannot stand the thought that there are others out there like me that haven't been able to figure this out, it just causes me more pain. i will help.

    I am having the same issue.  My roommate and I both have our own copies of MW3 and our own xbox 360's connected to the same router/modem. We have Verizon Fios and the modem is an Actiontec MI424WR. We have no problem playing at the same time online as long as we are not in the same match. However, when we try to play in the same match, we can never get into a match. It just keeps cycling through the "searching for matches screen.  We were at one point having issues with the OPEN NAT type but that has been solved, don't have me how, it just started working after I set the router back to defaults and we haven't had issues since.
    I tried the link above, but that doesn't seem to help my issue and I think you are having the same issue has me.  If you figure it out, please let me know.

  • Open NAT type on PS3 from moderate?

    Hey,
    Ive been wanting to get an open NAT type for a while, ive been unable to would anyone be able to help me?,
    i have a BT Infinity Hub 3, im currently on Moderate NAT type
    Many Thanks,
                         Sean

    Hi Matt,
    Welcome to the forum and thanks for posting. Take a look here for some information on port forwarding. I've also found this whcih you might find useful. Let me know if it helps.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • How to get a open NAT type with a linksys E2000 on PS#

    I called customer service and they were completely clueless, told me I had to pay for the Tech support to fix it. I have a Linksys E2000 and I cannot get a open nat for my PS3, tried the DMZ, and XBox settings but that obviously didnt work. So anybody have any ideas before I return this $100 router???
    Solved!
    Go to Solution.

    I've been having the same problems but on my Xbox.  I'm going to try this:
    On router:
    1 - Status tab
        Get DNS 1 & 2
    On Xbox: 
    2 - Static IP on Xbox
        IP: 192.168.1.xxx
        Mask: 255.255.255.0
        GW: 192.168.1.1
    3 - DNS Addresses on Xbox
    On router:
    4 - Forward ports 
        TCP 80    
        UDP 88    
        Both 53, 3074
    5 - Security tab
        uncheck Block Anonymous Internet Requests
        disable uPnP?
    6 - Reset devices 
    I'll let you know how it goes.

  • [EA4500] Multiple Devices with Open NAT?

    Hello!
    I have a PS3, PS4, Xbox 360, and Xbox One. The problem Im having and that Ive been having is keeping their NAT status to open. They are all assigned static IP addresses (which I made). What I do now is that everytime I want to use one of the devices, I go to my router settings and change the DMZ IP address to the static assigned IP of the device Im going to use.
    While this works perfectly, its very annoying to switch from one devices IP to another and if another family member wants to use one of the devices, only one of us can have an OPEN NAT.
    I already tried Port-forwarding from the listed ports on Microsofts/Sonys website and while certain features work, others tend not to. An example of that is on my Xbox 360, it tells me to open port 3074 and while this works for PartyChat and Halo, this probably wont work on Call of Duty. I already have the UPnP option set to Enabled and my routers firmware is up-to-date
    My idea is to purchase another EA4500 (lets call it Router 2) and connect it to my main EA4500. Then, on my main EA4500, I DMZ the IP address of Router 2 (which I will make) and disable all security features of Router 2 to ensure everything is open. Ofcourse, only the 4 devices listed above will be connected to it so none of my computers get hacked but after disabling my main routers IPv4 and IPv6 firewall just to see the results, not all the devices get an OPEN NAT!
    Another thing im looking at is "Port Range Triggering" and while I think this is the answer, I do not fully understand it and would like some help on telling me how it woks.
    How can I fix this problem?
    Thank you!

    Hi  INeedHelpPlease101,
    Having 2 routers in the network won't work for you. Who is your Internet Service Provider? I would suggest you configure the other EA4500 as a plain access point and make sure that you are getting a Public Internet IP address from the modem. 
    This may help. Title: Cascading or Connecting a Linksys router to another router
    Help, learn and share

  • Need an open NAT for 3 consoles and computer

    Have 2 Xbox 360's Ps3 and cant get aOpen NAT on any of them. I have done what I needed to do for the open but both xboxs read Moderate or strict Nat rating and the same for the Ps3. I need help. I am using a E1000 Linksys Router.

    Well it is not recommended to play two (2) Xbox 360® units on the same network connected to the same game server since the modem will only generate a single WAN IP address. But still you can do certain settings on router to make (2) Xbox 360 working. 
    Here is the link which can help you in opening NAT: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=23787&userrole=Links... 

  • Can't get 2 XBOX 360's to open NAT on new E1000

    I'm at my wits end and about to take this back. I had a Linksys WRT54GS that worked PERFECTLY with 2 360's, but even after using my old settings, using portforward.com's settings, and trying something I saw someone recommend here for someone having the same problem with an e3000, I simply cannot get both of them to open NAT. Can someone help?

    I'm having the same problem also.  I have both Xboxs on static IPs and I put one on port forwarding and the other on DMZ but it doesn't seem to make any differences.  It's getting me frustrated because I've tried everything and it seems to work sometimes so I backup the configurations, but the next day it goes back to strict. 
    I use to have a WRT54G v8 and it would work flawlessly, but this new E1000 model is giving me many problems.

  • Linksys e2000 router Open NAT troubleshooting multiple xbox 360's

    Hello,
    I've been searching for about 4 hours now how to fix my NAT problems. I thought it had it working on one xbox in my bedroom, as it said OPEN NAT. But, when I looked at my Xbox in the living room, it said MODERATE NAT. How can I get these both to say OPEN NAT? Any help is appreciated. Thank you!

    If you're attempting to game with multiple 360s, port triggering would be your best option.
    You might succeed in getting open NAT on both but the issue would be if you'd be able to play the same game on both consoles simultaenously. Since both consoles will use the same Internet port, the game packets will only be sent to one local IP address. Some games support this and some don't so if you're unable to get open NAT on both game consoles, call your ISP and request for another IP address. That should solve everything.

Maybe you are looking for

  • Error while deploying Capex Application Workforce

    Error while Loading members for Dimension: Account used parser is :class org.apache.xerces.jaxp.SAXParserImpl ---------- (What does this line mean, unable to correlate any functional setup for this) Kindly help me in this regard. Regards, Uday

  • Cant find my app world

    i have just got a blackberry torch 9800 and i downloaded app world and cant find it in my fone and the fone colour is normally black n blue my is white and its really funny its makin my pics very wired and cant c them proper am really confused hope s

  • Converting Visio Database Diagram to PDF loses containers

    I have a diagram of my database and it looks good within visio 2010.  When I go to the Acrobat tab and do "Create PDF" it generates the PDF but some of my containers are missing.  Is there some setting that is causing this? I have removed the tables

  • Web Service with overloaded methos

    Hello, I am using JDev 10.1.3.3. I've a class that has many overloaded methods and I want to publish that class as a web service. However, JDeveloper doesn't allow me to publish overloaded methods. Is there any way around it?? Please advice. Thanks,

  • Inbound Interface using RFC

    Hi Experts, We are using RFC to get idoc from other sap system. Now i have written a code calling bapi for material master . In which user passes the idoc number. Is there any way to automate it . I mean when we get idoc the material master should be