Open of auto-white list failed

I have spent the last few days getting cyrus & spam assassin to filter junk mail properly, with some success finally. I have followed the helpful Frontline Spam Defense tutorial from Topicdesk.com and also checked permissions on /var/amavis, plus just about every other trick I could find on these fora (mostly thanks to pterobyte).
Although I have now significantly reduced the spam getting through, I am now getting an error in the system log which seems to imply that it cannot create the white list file (presumably from the emails that I have put into the notjunkmail mailbox?):
Dec 30 10:21:47 eddie org.amavis.amavisd[49]: auto-whitelist: open of auto-whitelist file failed: locker: safe_lock: cannot create tmp lockfile /var/amavis/.spamassassin/auto-whitelist.lock.eddie.waveneyrivercentre.co.uk.12 84 for /var/amavis/.spamassassin/auto-whitelist.lock: Permission denied
Contents of /var/amavis is:
amavis-20060719T174524-12574 amavis-20070930T043646-14035
amavis-20060905T092217-09995 amavisd.lock
amavis-20060905T095328-10092 amavisd.pid
amavis-20061007T085000-04020 amavisd.sock
amavis-20061007T085008-04039 clamd
amavis-20061023T192617-21733 clamd.pid
amavis-20061023T194248-21871 db
amavis-20061030T064013-20653 tmp
amavis-20061030T065355-20681 whitelist_sender
plus a load more amavis-number files earlier in the list. There is no .spamassassin file.
the /var/amavis directory itself has permissions as follows (output from stat)
234881026 86096 drwxr-xr-x 106 _amavisd _amavisd 0 3604 "Dec 30 10:34:20 2007" "Dec 29 20:55:37 2007" "Dec 29 20:55:37 2007" "Mar 21 00:28:17 2005" 4096 0 0 amavis
Well I hope that someone can help me.
Many thanks

Thanks David that is a great help
I have carried out the alterations as suggested in the link, we will see what happens.
Here is the output from ls -al /private/var/amavis:
total 32
drwxr-xr-x 106 _amavisd _amavisd 3604 Dec 29 20:55 .
drwxr-xr-x 43 root wheel 1462 Nov 26 11:14 ..
lrwxr-xr-x 1 _amavisd _amavisd 25 Feb 18 2007 .spamassassin -> /var/clamav/.spamassassin
drwx------ 6 _amavisd _amavisd 204 Feb 18 2007 .spamassassin.old
drwxr-x--- 4 _amavisd _amavisd 136 Nov 9 2005 amavis-20051109T091813-08106
drwxr-x--- 4 _amavisd _amavisd 136 Nov 9 2005 amavis-20051109T092204-08134
drwxr-x--- 4 _amavisd _amavisd 136 Sep 24 10:50 amavis-20070924T105049-17755
drwxr-x--- 4 _amavisd _amavisd 136 Sep 30 04:36 amavis-20070930T043646-14035
-rw-r----- 1 _amavisd _amavisd 0 Dec 30 20:10 amavisd.lock
-rw-r----- 1 _amavisd _amavisd 3 Dec 29 20:55 amavisd.pid
srwxr-x--- 1 _amavisd _amavisd 0 Dec 29 20:55 amavisd.sock
srwxrwxrwx 1 _amavisd _amavisd 0 Dec 29 20:53 clamd
-rw-rw---- 1 _amavisd _amavisd 2 Dec 29 20:53 clamd.pid
drwxr-xr-x 9 _amavisd _amavisd 306 Dec 29 20:55 db
drwxr-xr-x 10 _amavisd _amavisd 340 Dec 30 20:10 tmp
-rw-r--r-- 1 _amavisd _amavisd 3 Sep 27 05:43 whitelist_sender
and sudo ls -al /private/var/amavis/.spamassassin/:
total 33376
drwx------ 6 _clamav _clamav 204 Nov 1 09:26 .
drwxr-xr-x 11 _clamav _clamav 374 Dec 30 14:52 ..
-rw------- 1 _clamav _clamav 5271552 Nov 1 09:26 auto-whitelist
-rw------- 1 _clamav _clamav 1302528 Nov 1 09:26 bayes_seen
-rw------- 1 _clamav _clamav 10510336 Nov 1 09:26 bayes_toks
-rw-r--r-- 1 _clamav _clamav 1175 Feb 18 2007 user_prefs
does this tell us anything? the permissions for .spamassassin are ok I think? So would the changes I made have any effect on the server log message? I just checked the log and got another instance of it. Thinking about it, the learn script runs at 3:00 am or something so this log item is probably not connected to that script. So what else could be causing it?
Many thanks again
James

Similar Messages

  • My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

    Hi all,
    My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

    Hi all,
    My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

  • Lightroom 2 - Auto white balance - crash

    I'm having intermittent problems while applying auto white balance on some CR2 files in Lightroom 2 running on OS X 10.5.4. When choosing Auto from the list of white balance options, LR waits for a second or two, doesn't update the history panel and the spinning beachball appears. CPU rises to about 100% and there's no other way than to force quit.
    So far it happens with, say, one in 50 images (I've been working on approximately 100 images and with 2 this happened).
    When I restart I can easily recreate the problem by going through the same routine.
    The workaround is working on another image and then going back to the problematic one; then I can apply AWB without any problems.
    I can save a (lengthy) hang reporter log file.

    Thought I was doing pretty good with LR2, but unfortunately this problem has showed up on my Mac OS X 10.5.4 system. The stalls (i.e., beachball) are when developing CR2 images from a Canon 5D. I experience many occurrences of the problem when going through this folder of RAWs, perhaps 20-30% of the images. Today I thought I had found one that always fails, but turns out not to be the case, although it causes a failure over half the time it is accessed. Same symptoms as described in the above posts: Convert an image's white balance to auto, in either quick-develop or develop. Then when you access the image you get the spinning beachball forever, and have to force-quit. I've also stalled LR with this sequence: in QD, convert WB to auto, switch to develop module, undo the WB change in history by clicking the prior step... LR stalls. Basically I've seen all the same steps as described here, and more.
    Also, just for fun I tried everyone's favorite troubleshooting step, i.e., trashing preferences. It made absolutely no difference. The first time I simply clicked on the troublesome image, LR got stuck.
    Jao... interestingly, I never saw this problem in the beta in spite of developing many, many images in the beta. If it was known and not fixed, that's quite a concern.

  • "Open method of Workbooks class failed" when opening Excel file via Internet Explorer

    (apologies, I posted this first to the general Office 2010 forum, but then realized this was probably a better spot to post)
    We have an Excel COM add-in installed on users' PCs.  This add-in responds to workbook open events by opening a particular XLA file (also deployed to the PC) to make certain features available.  This process works flawlessly when Excel files are
    opened locally - but when a user attempts to open an Excel file from an IE link, we get the following error: "Open method of Workbooks class failed".  This is happening on the line that is trying to open the XLA file.  This only happens
    when launching an Excel link from IE - works fine in Chrome or Firefox.
    I have found several posts on this topic, but no solutions:
    1. This post (https://social.msdn.microsoft.com/forums/office/en-US/73c96005-84af-4648-b103-32b677205be3/open-method-of-workbooks-class-failed)
    is the closest to our problem.  In this case, the "answer" was that the user may not have access to the 2nd workbook being opened.  But in our case, we're opening an XLA that is on the local machine, and I've confirmed that it is not
    corrupt and accessible (read & write, just in case!) to Everyone.
    2. This (very old) post (http://www.pcreview.co.uk/forums/open-method-workbooks-fails-excel-hosted-ie-t965608.html)
    seems similar, but is talking about opening Excel inside of IE.  This is not what we're doing - the link is supposed to (and does) open Excel outside of IE.  Interestingly, Excel.exe is being launched with the "-embedded" flag, even
    though it isn't running in the IE window.  When launching Excel by opening the file locally, Excel.exe is run with the "/dde" flag instead.  Clearly the "-embedded" mode is what is causing the problem.  I could change the
    links on the web page to use some JavaScript to open Excel differently... unfortunately, the links are actually generated by SharePoint (the Excel files are in a SP repository), so this is not really an option.
    3. This Microsoft KB article (http://support.microsoft.com/kb/268016) talks about problems opening an XLA directly from IE... but this is the case of a link pointing
    directly to an XLA file, not opening a regular workbook that in turn opens an XLA, as is my case.  In fact, this article specifically points out in the "More Information" section that "End users do not normally open XLAs; instead they open
    an XLS that (if needed) loads one or more XLAs during startup." ==> precisely what I'm trying to do that is giving me the error!
    I've replicated the situation with a very simple COM add-in (created in VS2010 using VB.Net) and a very simple XLA file (does nothing, just pops up a message in auto_open).  For anyone wanting to try it out, here is the exact test case:
    1. In Excel, create a simple XLA file containing only the following code, and save it in C:\TEMP\dummy.xla:
    Sub Auto_Open()
    MsgBox "Auto Open fired"
    End Sub
    2. In Visual Studio, create a new Excel 2010 Add-In.  I created mine via Visual Basic, but I doubt the choice of language matters.  Place the following code in ThisAddin.vb:
    Public Class ThisAddIn
    Private Sub ThisAddIn_Startup(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Startup
    AddHandler Me.Application.WorkbookOpen, AddressOf Application_WorkbookOpen
    End Sub
    Private Sub ThisAddIn_Shutdown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shutdown
    End Sub
    Sub Application_WorkbookOpen(ByVal workbook As Excel.Workbook)
    On Error GoTo ErrHandler
    If (Not workbook.Name.Contains("dummy.xla")) Then
    MsgBox("Workbook open")
    Application.Workbooks.Open("C:\temp\dummy.xla")
    Application.Workbooks("dummy.xla").RunAutoMacros(Excel.XlRunAutoMacro.xlAutoOpen)
    End If
    Exit Sub
    ErrHandler:
    MsgBox(Err.Description)
    End Sub
    End Class
    3. Build & publish this add-in and install it on the same machine as the XLA created in step 1.
    4. Create and save an empty Excel workbook (I called mine WayneTest1.xlsx) - save it locally (on your desktop), and put a copy somewhere on your web server (I put mine directly in c:\inetpub).
    5. Create an HTML file with a link to that workbook, saving it to the same web server location - here is mine:
    <html>
    <body>
    <a href="WayneTest1.xlsx">Link to Excel file</a>
    </body>
    </html>
    6. Double click the workbook on your desktop (from step 4) - opens fine, I get the "workbook open" message, following by the "Auto Open fired" message.
    7. In Internet Explorer, navigate to the HTML file specified in step 5 and click on the link - when prompted, select "Open" - I get the "workbook open" message, following by the error message "Open method of Workbooks class failed".
    Here are a few things I've ruled out / tried so far:
    - Unchecked all the "Protected View" settings in Excel, made no difference
    - Unchecked all the "File block settings" in Excel, made no difference
    - Made sure dummy.xla was open for read & write to Everyone
    - Made sure the web page was in Trusted sites and set the security level to Low for those sites in IE
    - Tried making the local desktop file (step 6) readonly, made no difference (i.e. launching it locally still worked fine)
    - Tried using Excel 2013 - made no difference
    Any ideas / suggestions?

    Hello Wayne,
    Apologies for the delay.
    I went through your post and tried to reproduce the issue. I was able to reproduce it. Based
    on its complexity and as it requires more in-depth analysis, your question falls into the paid support category which requires a more in-depth level of support.
    Please visit the below link to see the various paid support options that are
    available to better meet your needs. http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Thanks,
    Anush

  • How to delete old addresses that appear in auto complete list in iMessage

    Mavericks 10.9.1
    iMessage Version 8.0 (4218)
    MBP Late 2011
    When typing in the name of a contact I want to message, a list of addresses appears as an auto-complete/auto-fill list. 
    One address is no longer used and I would like to delete that particular address. 
    The address is not on the contact card. 
    I'm sending a message via iMessage to another iMessage verified address on an Apple device(s). 
    My iCloud contacts are synced correctly with iphone/ipad/MBP.
    Thanks

    First, search Contacts to make sure the address doesn't appear on any card. If it doesn't, continue.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.iChat
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • FYI: Confirmed flaw with Outlook Auto-Complete lists w/Exchange Online

    Ever since our organization migrated to Exchange Online we noticed a flaw with how Outlook's Auto Complete list (nickname cache) operates.  We've finally gotten a confirmation from Microsoft that the following is indeed a problem:
    Each entry in a user's local Outlook auto-complete cache is represented by an LDAP distinguished name.
    When Exchange is hosted on-premises these entries pretty much never change.
    When your organization is hosted on Exchange Online, the distinguished names for your mailboxes can change without notice due to maintenance processes (Microsoft's engineers have confirmed this to be true).
    There are other ways that a mailbox's distinguished name can change (re-creating a mailbox, etc.)
    Outlook's local auto-complete cache has no way (currently) to reconcile changes should any of its entries' distinguished names change in the cloud.
    When the entries in the local auto-complete cache become "stale" the following may happen:
    Emails to affected recipients can bounce back.
    Emails to distribution groups containing members which have stale auto-complete entries can bounce back.
    On occasion no NDR is even generated (BIG PROBLEM).
    As noted above, we've gotten Microsoft to admit that this is indeed a problem with Outlook when combined with Exchange Online. I was told that the Outlook product team has been notified of this problem.  However, in order to escalate this issue I was
    asked to spread the word to other customers so they can also chime in if they've been affected.
    Please supply your feedback to Microsoft and ask that Outlook be enhanced to either reconcile the local auto-complete list with the online GAL, or provide some sort of notification to the user that an auto-complete entry has become "stale" or invalid.
    Thanks for everyone's time!

    Hi,
    There is nothing called as Outlook's local nick-name cache. This resides on the mailbox and not outlook and supports only 1000 entries only. If the entries exceeds 1000 it will not function correctly.
    After the .nk2 file has been imported into your mailbox, Outlook writes a value into a hidden message in your mailbox.
    To locate this property in MFCMAPI, open the
    Associated Contents table of the Contacts folder. Then, select the message with
    Subject = IPM.Configuration.ContactPrefs.
    Then, double-click the PR_ROAMING_DICTIONARY property to see the configuration setting nickname cache import. The value to examine is
    pImportedContactNickNames (True = the import has already occurred).
    Since you are facing issues at this point of time, it needs to be corrected. I would appreciate if you can open phone support case with O 365 team and ask them to escalate to Exchange Level , we should be able to work with
    you and correct the issue
    Hope this helps
    Thanks

  • Process list failed

    Hellow everyone,
    while opening SAPMMC i got message like "Get process List Failed" Unknown error.
    How can solve this problem
    Regards
    Ganesh

    That is a well known bug with SAP MMC. Next time you open SAP MMC, and you go to close it, make sure your last action was not looking at the Process List - open the syslog or whatever but get out of that Process List BEFORE you close the SAP MMC session.
    Next time you open the SAP MMC, you won't get that message.

  • Adobe cloud - opens to blank white window

    just downloaded the adobe cloud for the first time.  30 day trial opens to blank white screen everytime, I can't try any programs.  Thanks

    I have the same issue.
    Downloaded and installed CC ok.
    Start CC and all I get is the CC banner at top of screen with cog symbol.
    Rest of screen is white, blue circle goes round and round for few seconds while loading then disappears.
    The only options when click on cog is Help, Pin to Notification area & Quit.
    Have tried running as admin - no good.
    Have tried renaming odm.db to odb_old.db - no good.
    this is on desktop.
    i signed up for the PS & LR package.

  • ITunes missing from Media Browser -- "open itunes to populate list"

    I am on a MacBook Pro 10.7.3 running GarageBand '11 6.0.4 and all of the sudden no tracks will display under Audio in the Media Browser (Photos and Movies still appear). No tracks from either iTunes or GB show up. This is confusing as I have been using GB to make podcast/music mixes for more than 5 years and I haven't changed any settings or done anything different, but now I get the message "open itunes to populate list" or "To see GB songs here, open GB to edit and save your music."
    Also, for quite some time I have been unable to go the alternative route of dragging tracks directly from iTunes and dropping them on to the timeline in GB -- that used to work, but mysteriously stopped, so I am dependent on the Media Browser for importing music.
    I read thru the forums and tried the advice given to someone this was happening to in Final Cut -- recreating iTunes .xml file. Did that, still no tracks display.
    Other advice says to reinstall GB or iLife altogether -- I hope to avoid this, but if I need to go this route, how do I reinstall GB w/o a disk? Can I do it through App Store and will it recognize that I have already purchased it?
    I am dying to be able to get back in to my music mix making in GB, so thanks in advance.

    moontroll wrote:
    unable to go the alternative route of dragging tracks directly from iTunes {...} I am dependent on the Media Browser for importing music.
    another way:
    http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    moontroll wrote:
    how do I reinstall GB w/o a disk?
    you can't, you'd need to find the DVD
    moontroll wrote:
    Can I do it through App Store and will it recognize that I have already purchased it?
    no, it'll only recognize your purchase if it was through the app store

  • Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed. I get the opening window where it says installing plugins searching etc, after which PS opens in full screen. Just moments after that there's a fail warning, no code number, only

    Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed.
    I get the opening window where it says installing plugins searching etc, after which PS opens in full screen.
    Just moments after that there's a failure warning, no code number, only the warning that PS failed to open and PS will close.
    I tried downloading it for a second time, but this did'nt solve the problem.
    Befor the CC version I used a one year student version of Adobe CS6.
    What can I do?

    Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
    Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

  • LG G2 block text message black/white list ???

    K, I just got the LG G2 the other day and say that when you go to block a text message there is a black and white list.
    What are the differences?

        Dizzybandit, I want to make sure that we are getting you the correct information. I'm not exactly finding where this list is at. Can you please tell me where you see this? Are you going into Messaging (the Green smiley face conversation bubble)?  Or are you using a different application? We really want to get to the bottom of this ASAP.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport

  • I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

    I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

    You can associate files from the Bridge level and the Desktop level.
    In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
    If you want to open files from the Windows Desktop in CS4, these are the instructions:
    Do this from the Windows Desktop:
    If you want your image file to open in Photoshop and it doesn't, right click on it and choose
    Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

  • JPS-06514: Opening of file based keystore failed.

    I have a fresh install of JDeveloper 11.1.2.3.0 (Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1). When I try to start the integrated WebLogic Server from the Application Servers explorer tab, it fails and crashes with "JPS-06514: Opening of file based keystore failed." The entire output console content is pasted below for your reference. I am under time pressure, so the sooner somebody can help, the better. Thanks in advance!
    *** Using HTTP port 7101 ***
    *** Using SSL port 7102 ***
    C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~3\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\xqrl.jar;.;c:\oracle\middleware\wlserver_10.3\server\lib;M:\dommgr\DomainManager\classes;M:\3rdparty\wls_10.3\weblogic.jar;M:\3rdparty\wls_10.3\wlfullclient.jar;M:\3rdparty\wls_10.3\wljmxclient.jar;M:\3rdparty\wls_10.3\wlclient.jar;
    PATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\native;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~3\jre\bin;C:\Oracle\MIDDLE~1\JDK160~3\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\IBM\RationalSDLC\ClearCase\bin;C:\Program Files\IBM\RationalSDLC\common;M:\etc;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_29"
    Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
    Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\FCOCA~1.COR\AppData\Local\Temp\trustStore7654511046496503013.jks -Ddmsc_config_file=M:\etc\dommgr.properties -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=C:\Oracle\MIDDLE~1\JDK160~3/jre/lib/endorsed;C:\Oracle\MIDDLE~1\WLSERV~1.1/endorsed -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\FCOCA~1.COR\AppData\Roaming\JDEVEL~1\SYSTEM~1.1\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe101\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
    <19-Dec-2012 2:37:23 o'clock PM EST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <19-Dec-2012 2:37:23 o'clock PM EST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <19-Dec-2012 2:37:24 o'clock PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>
    <19-Dec-2012 2:37:24 o'clock PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
    WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
    WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
    WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
    WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
    WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
    WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
    WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
    WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
    WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
    WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491
    WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925
    WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050
    WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050 >
    <19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
    <19-Dec-2012 2:37:25 o'clock PM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
    <19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
    <19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00003. Log messages will continue to be logged in C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
    <19-Dec-2012 2:37:25 o'clock PM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\userP\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
    19-Dec-2012 2:37:26 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
    WARNING: Opening of file based keystore failed.
    <19-Dec-2012 2:37:26 o'clock PM EST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
    <19-Dec-2012 2:37:26 o'clock PM EST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:148)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
         at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         Truncated. see log file for complete stacktrace
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
         at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
         Truncated. see log file for complete stacktrace
    >
    <19-Dec-2012 2:37:26 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
    <19-Dec-2012 2:37:26 o'clock PM EST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
    <19-Dec-2012 2:37:26 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
    <19-Dec-2012 2:37:26 o'clock PM EST> <Warning> <Security> <BEA-090922> <Certicom SSL is available, however JSSE is being used for SSL, since JSSE has been selected by attribute SSLMBean.JSSEEnabled, either explicitly or by default.>
    Process exited.

    I believe you can chmod back to your app user and correct the issue.
    -ryan

  • Error : Opening a rowset for "Sheet$" failed. Check that the object exists in the database.

    Hi,
    i am trying to load the data from excel sheet using For each loop container in ssis 2005.
    But it gave me the below error:
    Error: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
    [DTS.Pipeline] Error: "component "failed validation and returned validation status "VS_ISBROKEN".
    Error: There were errors during task validation.
    Could you please let me know the solution
    Regards
    Sqlstud

    That message usually means validation has failed;
    Have any of the underlying tables changed?  Data types, lengths, maybe even column ordering, etc...?
    try this..
    Right-click on the Data Flow Task and select Properties. Then set DelayValidation =TRUE.
    Let us TRY this |
    My Blog :: http://quest4gen.blogspot.com/
    Thanks ETL.
    Everything is fine..(Datatypes,length,orderings etc)
    Already i have set
    DelayValidation =TRUE.
    IS there any other problem?
    Regards
    Sqlstud

  • Lightroom: Why does auto white balance no longer work after changing the camera calibration profile?

    I'm using NEF raw files from Nikon.
    Lets say for example I import a NEF file into Lightroom (v4) and click on 'auto' for white balance. The white balance in the image is  adjusted correctly (somewhat). However, if I then change the camera profile (in the camera calibration section) from 'adobe standard' to 'camera standard' then the white balance in the image becomes very wrong. I then have to set the white balance back to 'as shot' and correct it manually instead.
    Why would 'auto white balance' no longer work just because I change the profile from 'adobe standard' to 'camera standard'?
    Any ideas?

    Works as expected here...
    Which Lr version and what OS??

Maybe you are looking for