Open Office Not Functioning Properly After Mavericks 10.9.1 Update Today

Is anyone else getting this issue?
Everyone in the company I manage was using MS Office on their Windows-based computers and we were getting a lot of annoying formatting incompatibilities becasue I was using Pages on my Mac. I actually prefer Open Office and started using that again but we were still having trouble. I decided to install Open Office on all of our computers to avoid cross-platform dramas and with us all using Open Office, it has meant that we've elimintated all annoying little formatting incompatibilities and other problems.
We've been using Open Office on 3 Windows-Based computers and my MacBook Pro for about 3 months. I agreed to the latest Mavericks update 10.9.1 today and since then, whenever I start my Open Office application, I'm getting this annoying little box that won't go away (see attached picture) and numerous options in Open Office can't be accessed. I've deleted and reinstalled Open Office this morning and tried different combination of shutdown, restart, force quit and nothing seems to affect this problem. I also can't reopen files recently opened because an error box pops up to say that they can't be opened because Open Office is not installed. Yet I can go to finder and open them from there.
It would take too much time to list all of the separate issues I've found; so in summary, a lot of the Open Office functionality just ISN'T WORKING since the Mavericks update today. Apple, what have you done?! What can BE done to fix this?

Hi navaneeth27
Yes that's exactly what I'm experiencing.
I'm wondering whether it has something to do with having had Open Office running while installing the update to Mavericks 10.9.1. I had OO open when I agreed to the update and I was still working on a Writer file when my MacBook Pro unexpectedly shut itself down and began installing the update, showing only a progress bar in a small window before reloading everything. It was at that point that the unresponsive 'Don't Reopen' 'Reopen' window appeared. It's insidious and stopping much of the functionalty of OO from working. Such a pain!
I force-quit OO, fully uninstalled it, purged all mention of it from my MBP, restarted tried opening files that were set to be opened by OO by default, and confirmed that they were being opened by Pages - and they were by default. I then reinstalled OO 4.0.1 from the OO site (and that's what I had earlier today, before this adventure began). I then tried opening some previous documents that were saved as .doc and OO popped up WITH the 'Don't Reopen' 'Reopen' window AAAAGAIN!
I'm working on 2 screens so I've placed the box that just won't go away at the very edge of my MBP screen and am workng on files on my second screen - but much of the functionality still isn't available.
I'm stuck and don't know what to do next.

Similar Messages

  • LG 22-inch monitor won't function properly after last Mac OS X Update

    My new LG 22-inch monitor was working great until I received the last Mac OS X Update (10.4.9). I received this update after installing Tiger (better late than never...ha ha) and after I restarted my system, I saw multiples of the same files on my desktop, and when I would open a window, four duplicate windows would appear (this did not happen until after the update). The only thing that corrects the problem is to go into System Preferences => Displays and change the monitor resolution. But even after I Click to Lock Changes, I have to go in and do this every time I launch my system. I was so vexed that I hooked up the former monitor (Apple CRT, 17 inch) and now the same thing is happening to it! Sigh... I am no Mac Genuis, but I know someone out there can offer some advice! Thanks!
    533 MHz PowerPc G4   Mac OS X (10.4.9)   LG L226WTQ 22 inch flat panel monitor

    lgcustodio wrote:
    I ran the disk utility and saws verify disk ok. I did the same process for repair disk permissions and seems to have problems.
    These warnings are accurate but according to Apple can safely be ignored. See Mac OS X 10.5: Disk Utility's Repair Disk Permissions messages that you can safely ignore. IOW, They are not normally problems.
    I check the volume scheme but I don't have any partition
    You do have partitions & a partition scheme. To check what the scheme is, click on +the drive itself+ in the list on the left in Disk Utility. It will probably be identified as "298,1 GB WDC WD3200AAJS-40VWA0 Media" or something very similar. If it contains the startup disk, it will be the first item in the list. It will have one or more named volumes indented under it, such as "Macintosh HD."
    When you have clicked on the WDC drive instead of a volume name indented under it, you should see seven items of information about it at the bottom of Disk Utility's window, to the right of an icon representing the drive. The info is in two columns. The last item in the rightmost column, below the S.M.A.R.T. Status (which should say "Verified"), should be "*Partition Map Scheme :* " & be followed by the scheme type. It should be "GUID Partition Table."
    If you don't see the seven info items after selecting the drive, it may indicate a problem that needs attention, but I suspect that you just haven't looked in the right place for the info....
    As for the 'cannot install' message, make sure that you have downloaded the right update, that it is not the server update version for example. You may need to download it again, discarding the first download as somehow defective.

  • USB 2.0 not functioning properly after upgrading to 3.10.3-1 kernel

    After upgrading to the 3.10.3-1 kernel USB 2.0 is not working anymore on my ASrock ION330 nettop.
    I just did a system upgrade (including a kernel upgrade to 3.10.5-1), but the problem remains...
    Here's the relevant messages that I extracted with journalctl -b
    Aug 07 09:59:11 alcyone kernel: ACPI: bus type USB registered
    Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver usbfs
    Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver hub
    Aug 07 09:59:11 alcyone kernel: usbcore: registered new device driver usb
    Aug 07 09:59:11 alcyone kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Aug 07 09:59:11 alcyone kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Aug 07 09:59:11 alcyone kernel: ehci-pci: EHCI PCI platform driver
    Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: setting latency timer to 64
    Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: OHCI Host Controller
    Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
    Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000
    Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
    Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: setting latency timer to 64
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: EHCI Host Controller
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: debug port 1
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: cache line size of 64 is not supported
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: irq 18, io mem 0xfae7ec00
    Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
    Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: USB hub found
    Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: 6 ports detected
    Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
    Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
    Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 3 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 4 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 5 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 5, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 6 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 6, error -71
    Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
    Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 7 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 8 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 9 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 9, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 10 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 10, error -71
    Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
    Aug 07 09:59:11 alcyone kernel: usb 2-5: new high-speed USB device number 12 using ehci-pci
    Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
    Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
    Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 13 using ehci-pci
    Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
    Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
    Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 14 using ehci-pci
    Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 14, error -71
    Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 15, error -71
    Aug 07 09:59:13 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 5
    Aug 07 09:59:13 alcyone systemd[1]: Found device MCP79 Ethernet.
    Aug 07 09:59:14 alcyone kernel: usb 1-1: new low-speed USB device number 2 using ohci_hcd
    Aug 07 09:59:14 alcyone kernel: usb 1-4: new low-speed USB device number 3 using ohci_hcd
    I'm glad that keyboard and mouse are working properly under USB 1.0, but neither my usb-parport printer nor my USB external hard drive are recognised any more :-(
    Any ideas how to solve this?? (I'd prefer not to downgrade the kernel)
    Last edited by zilverling (2013-08-07 14:28:36)

    I've discovered it's not that USB 2.0 is not working. 3 out of 6 usb ports/busses seem to work properly. The other three seem totally dead. Obviously this was not the case under kernel 3.9.9-1. Downgrading to kernel 3.10.2 made no difference.
    In practical terms this means that I can use my printer and access my external drive if I use the right port/bus. And I could probably work around the problem by plugging a USB hub in one of the working ports. But I would be happy to get rid of the error messages and have all 6 usb busses working as they did before...

  • Auto Sync not functioning properly after Auto Tone

    Auto Sync is functioning as expected, unless I choose Auto Tone first.
    I have about 1000 Images that I wish to apply a Preset to. When I created the Preset using New Develop Preset, I left all of the options checked except Exposure.
    I want to use Auto Tone to set the exposure for each image automatically, and then apply my preset to all images, leaving their exposures unchanged. If I apply the Preset to all of the images before selecting Auto Tone, everyting works as expected. If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not. The preset will change all settings except those in the Basic Tone area. It's as if Auto Tone has somehow become "sticky" and will not allow itself to be overridden. Even if I choose a single image, apply my new settings to it, and then manually select Sync, it doesn't work for all images. It also won't work if I have have Auto Sync selected, and then make manual changes to individual sliders. It will work for some images near the ones I see in the filmstrip on the bottom, but not all of the images selected.
    This is extremely frustrating. Again, everything works exactly as expected, unless I choose Auto Tone first.

    kbarre wrote:
    Auto Sync is functioning as expected, unless I choose Auto Tone first.
    If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
    Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
    The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
    Try this:
    * do the auto-toning, then let it percolate for a while.
    * then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
    Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
    Better?
    I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
    Rob

  • My Epson Stylus SX535WD printer is not installing properly after Mavericks upgrade

    Hi,
    This morning - to my deep, deep regret - I uninstalled my Epson driver and associated software.  I forget why I even did it now; I think it wasn't working very smoothly and I read on a forum it was wise to uninstall and reinstall if I have recently upgraded my operating software.  I put Mavericks on back in February - and the printer/scanner has worked since then. 
    Anyway - I have spent the best part of the last 4 hours trying to reinstally the software - but now have no printers availabe as my constant error message.  Epson advised me to install a 1.9Gb fix - which I have - and the latest epson software.  But I can't find them on my laptop now.  It is only when I click on Epson uninstall that I can see them sitting there - but with no indication of where they are on the computer.  They aren't in downloads or applications...  where else can i look?  How else can I get this printer/scanner up and running again?
    All tips VERY VERY VERY welcome. Thanks

    Have you installed Apple's latest Epson drivers?
    They are here:
    http://support.apple.com/kb/DL1398

  • "Remove Hidden Information" not functioning properly after crop

    Hello all,
    I often print multi-page MS Visio documents to PDF, then edit them in Acrobat Pro XI.  I have found that since the most recent update of Acrobat Pro XI, when I crop a page, then select "remove hidden information," it only removes text information, and not all the information that is cropped.  For example, if I have a box filled with text that is partially cropped, and I select "remove hidden information," the portion of the text that is cropped is removed, but the entire graphical portion of the box remains and can be seen if the file is "uncropped."  Is there a solution for this problem?  It seems like it should be easy to remove all the previously-visible data that has been cropped, and in the past, I have been able to do so, but I can't seem to any longer.
    Thanks in advance.

    I wouldn't expect it to remove part of a graphic in general. I haven't compared results.

  • My iPhone is not functioning properly after update.

    I recently updated my phone to the newest iOS update.
    Now all of a sudden if it is not on charge the screen just remains black completely.
    If it is connected to a source of power, it's charger it just keep flashing
    By this I mean the Apple logo appears for around a particular amount of time, only then to disappear to a black screen for maybe three-to-five odd seconds and repeat itself once again( I've looked on videos to see the apple logo stay on others, unlike mine flashes).
    My iPhone is a five, I live in the UK, I cannot go to apple until later so I'd prefer to get this fixed instantly.
    If anyone has a good way to solve this please comment and explain in understandable fluent English as I need this solved ASAP.

    Remove any screen protectors or cases, does that resolve the problem?
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • "Maps" not working properly after 10.3.2.440 update.

    I rec'd my 10.3.2.440 update Sunday night.  Everything seems to be working except Maps.  Maps will open, but I get a message on screen like, "Content Unavailable.  My Places content is currently unavailable."  The map opens, and finds my present position, but I can't search for addresses, stores, or anything else.  If I manually type in an address, it may find it, but it won't calculate directions.  Any help would be appreciated! D Wells

    Hi there! @Dwells2009  
    Thanks for posting your concerns. I’m sorry to hear you’ve had issues with the Maps app.
    I’d recommend trying a soft reset by pulling the battery from the phone for 2-3 minutes.
    If this does not clear the issue, you will want to back up your data and factory reset the phone.
    For steps to factory reset your phone, please go to http://www.att.com/devicehowto/ and select the make and model of your phone. Once you have done this, locate Troubleshooting in the left column and select the + symbol then click on Reset Device for full back up and reset instructions.
    Hope this helps!
    Charise

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • TS1702 I am using iPad 3, today I upgraded it to iOS 6 however after updating a particular application is not functioning properly. it's Candy Shoot, need help in playing that game

    I am currently using iPad 3, and upgraded it to ios6 today. However after updating the software e a particular game Candy Shoot is not functioning properly. Please suggest how to get it solved

    thanks, but can you tell me how do I get in touch with the app development team?

  • MacBook Air not functioning properly

    Hi all, my MacBook Air (running on Lion OS X while downloading Mavericks, purchased in 2012) is not functioning properly. Over the summer I tend to not use my laptop a lot since I mainly use it for schoolwork. I had opened my Air for the first time in a while and it was fine - however after that I had left the screen open and the screen went dark. I had left my Air open for a few weeks and when I tried to turn it on, it would not do anything. It would not respond to anything I did and eventually had to restart my computer in SafeMode. I thought I had fixed my problems however a few applications were giving me trouble
    iPhoto would not open at all and after many failed attempts to debug my issues, I had to delete the application from my computer entirely. Eventually I tried to redownload it from the appstore but it wouldn't work so I gave up.
    Recently, I noticed that my Mail application will not open (even though the system preferences for it will). I also noticed that a few of my System Preferences will not open - Energy Saver, Desktop & Screen Saver, and Spotlight.
    I am currently downloading the newest update, Mavericks. I did download Mountain Lion, however when I rebooted my laptop over the summer in Safe Mode I must have reverted back to a back up that did not have Mountain Lion downloaded into my computer.
    I am at a loss of what to do.

    check my questions looks similar problem and I have solve it
    airplay doesn't work after I bought a new wireless router
    hope it fix yours too

  • Extension may not function properly...

    My co-worker has been having some issues with her InDesign crashing latley. I opened up her Extensions manager just to see if I could find anything abnormal, and found alot of the extensions for InDesign have little yellow triangle warnings next to them. When I hover the mouse above it, it says "Extension may not function properly because it does not meet the dependency condition. I don't know what this means, or what should be done to resolve the issue.
    I checked my extensions manager on my computer at work, and i don't have any of these warnings on my InDesign extensions. So, I'm thinking this might be the cause of her InDesign crashing, but not sure.
    I clicked on the checkmark of one of her extensions, Assignment UI, to disable it, but not sure if I should do the same with the rest of them. After I disabled it, I can't see how to re-enable it. I try to click back on the box to enable it, but it doesn't do anything.
    She was just upgraded to OSX 9 Maverick today, but prior to that was using OSX 10.7.xx (Whatever the latest version was). I am currently using OSX 10.8.5, but wil be upgrading to Maverick soon as well.
    We are both using Mac 2.66 GHz Quad-Core Intel Macs with 16 GB memory. Both are using CS6, with the latest updates for InDesign applied.
    If anyone has any ideas on what to do with her extensions that have warnings it would be appreciated.
    Steve

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • Satellite P300D-110 integrated webcam is not functioning properly.

    Hello everyone,
    as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
    *How did this happen?*
    You tell me. This is how it went;
    * Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
    * Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
    To give a quick summary of the thread;
    * Using Camera Assistance Software provided by Toshiba I can take pictures.
    * Using Camera Assistance Software provided by Toshiba I can record sound.
    * Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
    * I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I have downloaded and isntalled the latest drivers from the Toshiba website.
    * My laptop is about a week old.
    I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
    Sincerely,
    a sad customer.

    Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
    Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
    Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

Maybe you are looking for