Open parameters for linux version

Do acroreader's open parameters work for the linux version?
I know in Windows they are written as 'acroread /A page=xxx ...' and for linux firefox as 'file://...#page=xxx'.
But how about the arguments in command line?

Good morning
Thank you for your reply, I’m trying to find out from our IT if we are using Adobe plugin or not.  In the meantime I created a new document, created a link and tried to open in the browser and received an error message webpage cannot be found.
When copying the url the last four characters have been changed see below
http://wyp-infoshare/sites/forcepolicy/Corporate%20Support/Equality,%20Diversity%20and%20H uman%20Rights%20strategy.pdf%20-%20page=5
Would this be because we’re not using adobe plugin?
Susan
Ext 22011

Similar Messages

  • How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

    An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
    1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
    2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)  
    3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
    4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
    5 - Then to open the app execute it: ./LenovoEMCStorageManager
    Video Tutorial
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
    In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
    Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
    Attachments:
    lenovoemcstoragemanager.jpg ‏27 KB

    Hello everyone ,
    I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install  the LenovoEMC storage Manager but it failed  :
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    Launching installer...
    Graphical installers are not supported by the VM. The console mode will be used instead...
    Preparing CONSOLE Mode Installation...
    ===============================================================================
    Choose Locale...
        1- Deutsch
       ->2- English
        3- Español
        4- Français
        5- Italiano
        6- Nederlands
        7- Português  (Brasil)
        8- Svenska
    CHOOSE LOCALE BY NUMBER: 2
    =======================================================
    Installer User Interface Mode Not Supported
    The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
    =======================================================
    Is it still aproblem with the 64 bits architecture ?
    Have you find any solutions ? Thank you very much

  • Request for linux versions of BPEL

    Could you send me a link for the linux versions of the BPEL software.
    thnaks, [email protected]

    You can go to
    http://www.oracle.com/technology/products/ias/bpel/index.html
    And under Downloads, Click on the "BPEL Process Manager"
    link, it will take you to the download page where you can get linux version.

  • It is possible for linux version to use the same icons of windows and mac version in the navigation bar?

    Firefox for linux uses the gtk theme icon in navigation bar, instead mac and windows uses other (trasparent) icons . I find more beautiful icons used in mac and win. Is there any way to force firefox to use this type of icons?

    Have you checked the themes add ons? You may find a "Windows 7" theme or something similar!

  • Open parameters for pdf in XI

    I am working on Acrobat XI Pro and Word 2013, previously when using Pro 9 and Word 2007 I could create a url link and add the open parameter #page=3 and then the link would open the pdf document on the specified page.  See example
    http://wyp-infoshare/sites/forcepolicy/Crime%20Division/Safeguarding%20vulnerable%20adults .pdf#page=3
    It still opens the pdf but always at page 1, have the parameters changed for XI or am I doing something wrong.
    Thanking you in anticipation
    Susan 

    Good morning
    Thank you for your reply, I’m trying to find out from our IT if we are using Adobe plugin or not.  In the meantime I created a new document, created a link and tried to open in the browser and received an error message webpage cannot be found.
    When copying the url the last four characters have been changed see below
    http://wyp-infoshare/sites/forcepolicy/Corporate%20Support/Equality,%20Diversity%20and%20H uman%20Rights%20strategy.pdf%20-%20page=5
    Would this be because we’re not using adobe plugin?
    Susan
    Ext 22011

  • Instalation for linux version redhat AS3

    while i instalation a system, what a parameters before install???? what version that kernel is now?????

    Yes, the MessageQ on Unix and Windows also supports multicast via MessageQ SBS protocol. But the Ethernet broadcasting is only support for OVMS.
    Regards,
    Leo
    Edited by: Leo Wang on 2010-8-6 下午8:41

  • Parameters for Opening PDF Files in Version XI

    I have an application that opens a PDF document using Reader Version 7 - 10 at a particular page.
    In Version XI this feature has been removed or changed and I can't find any documentation on Opening parameters for latest version.

    Due to your answer I have done some further testing and it appears Version XI does not accept spaces in the file name.
    If I remove the spaces in the file name it works fine.
    I have tried enclosing the file name in single and double quotes but no luck.
    I am using Delphi 7 and calling the routine Shellexecute with application parameter
    C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe
    and run parameters
    /A"Page=33"C:\MP5\Manuals\1145009 Operating Instructions.PDF
    The above works fine with version 7-10.
    With version XI it fails to find the file.

  • About  'PDF Open Parameters'  in Android environment.

    Hello;
    I'm writing an application for GalaxyTab.
    I need to show a specified page of the pdf file.
    So, I wrote the following code.
        Intent intent = new Intent(Intent.ACTION_VIEW);
        intent.setDataAndType(Uri.parse("file:///mnt/sdcard/download/mypdf_doc.pdf#page=3"), "application/pdf");
        this.startActivity(intent);
    In the 2nd line, I specified pag3 as described in 'PDF Open Parameters for Adobe Acrobat 7.0'.
    But the Acrobat Reader X always shows the top page.
    Could anyone help me?
    'PDF Open Parameter' says.
    URL Examples
    http://example.org/doc.pdf#nameddest=Chapter6
    http://example.org/doc.pdf#page=3
    http://example.org/doc.pdf#page=3&zoom=200,250,100
    Thank you.

    Thank you for your kind reply, Padlikar san.
    I'm happy that I can save my time to worry about this.
    Would you let me know when the feature will be implemented if you know.
    Regards,
    Kiharu

  • Oracle 8i is coming for Linux July 5!!!

    Okay so they now have a release date for Linux version of Oracle
    8i. Its July 5!!!!!!!!!!! Yippeee.
    I request that we all go to the corners of our rooms and stand
    there in silence for 20 minutes, in observance of this historical
    event!
    Mubashir
    null

    We just have to wait - time will come... ;-(
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by LinuxGuy:
    Download are has a Oracle 8i EE Release 2
    available for Solaris and NT but not for
    Linux.
    Why?
    Oracle is disappointing alot of Linux folks.<HR></BLOCKQUOTE>
    null

  • Unable to start OEM (Oracle 9.0.2 for Linux)

    I get the following error message as I tried to start the Oracle Managment Server under Linux (Note: I use United Linux 1.0 RC5 to hold Oracle Database Server 9.0.2):
    Starting the management server at Tue Jan 14 17:08:17 HKT 2003
    OEMCTL for Linux: Version 9.2.0.1.0 Production
    Copyright (c) 1998, 2002, Oracle Corporation. All rights reserved.
    Starting the Oracle Management Server...
    Error starting Oracle Management Server. ORBSingleton: access deniedjava.lang.SecurityException: ORBSingleton: access denied
         at com.sun.corba.se.internal.corba.ORBSingleton.connect(ORBSingleton.java:314)
         at oracle.sysman.vxn.VxnNamingContext.<init>(VxnNamingContext.java:285)
         at oracle.sysman.vxn.VxnNamingContext.getNewContext(VxnNamingContext.java:222)
         at oracle.sysman.vxn.VxnNamingService.getInitialContext(VxnNamingService.java:1072)
         at oracle.sysman.vxn.VxnNamingService.enableBootstrap(VxnNamingService.java:1080)
         at oracle.sysman.vxn.VxnNamingService.init(VxnNamingService.java:238)
         at oracle.sysman.vxn.VxnNamingService.getNamingService(VxnNamingService.java:103)
         at oracle.sysman.vxn.VxnNamingService.getNamingService(VxnNamingService.java:112)
         at oracle.sysman.vxa.VxaAppServer.initServer(VxaAppServer.java:3417)
         at oracle.sysman.vxa.Long postings are being truncated to ~1 kB at this time.

    The machine holding the database server is set with fixed IP address, any further idea or related documents for this problem?
    AY

  • How to reconfigure Oracle-xe (Oracle 10g for linux)?

    Hello!
    I found this article (seems useful since I use Mandriva 2010.2):
    [http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912|http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912]
    I installed Oracle 10g from the file "oracle-xe-univ-10.2.0.1-1.0.i386.rpm".
    Then, when run ./oracle-xe start and then ./oracle-xe status I get:
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-JUL-2011 23:39:49
    Copyright (c) 1991, 2005, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 2: No such file or directory
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=%hostname%)(PORT=%port%)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    It does not seem ok to me.
    I would love to truy to reconfigure it but if I try the command:
    ./oracle-xe configure
    ...I get:
    Oracle Database 10g Express Edition is already configured
    Does any body know how to reset and reconfigure Oracle 10g for Linux?
    Best regards
    Fredrik

    it seems to be "PLSExtProc" bu default.Nope, the ORACLE_SID is taken from the environment variable when the database is started on a *nix host, windows its set up in the database service. If you want to change the ORACLE_SID, set it. See the environment setup script in OH/bin appropriate for your shell. (OH short for $ORACLE_HOME)
    how to create a databaseYou mean tablespace?
    what you think about this error message ... read from socketWhat do you think about the error message, its your database. Socket read error can be caused by many things, the ora-NNNN error number can provide some insight. http://download.oracle.com/docs/cd/E11882_01/server.112/e17766/toc.htm

  • Oracle 8i for Linux shipping date

    I want it so bad I can taste it!
    Does anybody have any shipping dates for Linux version of
    Oracle 8i?
    Thanks.
    I know they said end of June, well this is almost end
    of June. :)
    Mubashir
    null

    Direct from my rep:
    I forgot to add my Linux research in my prior note. 8i on
    Linux is due July 5th. Don't know if that means we'll be able to
    get a CD shipped by then; more likely discs hit Oracle
    Manufacturing a couple weeks later.
    Mubashir (guest) wrote:
    : I want it so bad I can taste it!
    : Does anybody have any shipping dates for Linux version of
    : Oracle 8i?
    : Thanks.
    : I know they said end of June, well this is almost end
    : of June. :)
    : Mubashir
    null

  • Why no plugin for Linux?

    I heard the reason why a Linux plugin isn't being developed is because Skype is trying to make Skype for Web available on every device without a plugin. Don't you think you could at least quickly throw together a plugin or quick update to the Skype for Linux version because the Linux version of Skype has been dead for quite a while, and we still lack basic features like group video.
    [Topic title updated by moderator to be more descriptive. Original topic title was: "Linux"]
     

    Is there any ETA?It's kind of pathetic that us Linux users have been lacking with a fully working version of Skype with the same features Windows and Mac gets whenever your servers are probably hosted off of Linux machines.

  • Oracle 10g R2 for Linux ubuntu

    Hi,
    is it possible to install Oracle 10g R2 on Linux ubuntu ?
    If yes :
    from here :
    http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
    which one
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux Itanium
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux on Power
    Many thanks.

    Please note that this is 10g, and the UI has no support for Ubuntu/Debian.
    To get 10g to install, you need to create the file /etc/redhat-release, and put some redhat-string in there...
    oracle@c-3po:~$ uname -a
    Linux c-3po 2.6.28.8 #2 SMP Tue Mar 17 13:03:16 CET 2009 x86_64 GNU/Linux
    oracle@c-3po:~$ cat /etc/debian_version
    5.0.4
    oracle@c-3po:~$ cat /etc/redhat-release
    Red Hat Linux release 3.1 (drupal)
    oracle@c-3po:~$ cat /etc/issue
    Debian GNU/Linux 5.0 \n \l
    oracle@c-3po:~$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Mon Nov 29 12:59:40 2010
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE 10.2.0.4.0 Production
    TNS for Linux: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    Version, you probably want one of these,
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
    Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
    depending on if you have a 32- or 64-bit version of Ubuntu installed...

  • Download old Instant Client Version 10.1.0.4 for Linux

    Hi to all,
    the downloads for version 10.1.0.4 of Oracle Instant Client
    for linux seem to be not available anymore.
    Where can I download the packages:
    instantclient-basic-linux32-10.1.0.4-20050525.zip and
    instantclient-sdk-linux32-10.1.0.4-20050525.zip ?
    Thanks

    for OWB metadata, run this following script
    <OWB_HOME>/owb/reposasst/upg/upg10gTo10104.sql
    For runtime data
    <OWB_HOME>/owb/bin/unix/RT_upgrade_to_10_1
         This is only if it's NOT upgrading to 10gR2 database
    If you are upgrading to Oracle10g Release 2 with partial export and
    import and if you are changing the database instance or the computer
    hosting the database, then run the migration script:
    – For UNIX, navigate to OWB_HOME/owb/bin/unix and run
    RT_migrate_to_10_1.sh.
    The RT_migrate_to_10_1.sh prompts you for several parameters:
    the User Name and Password of your original Runtime Repository
    schema, the database connection string for your original Runtime
    Repository (in the form of host:port:servicename), the User Name
    and Password for your new Runtime Repository schema (whose values
    should match the original Runtime Repository), and the database
    connection string for the new Runtime Repository (also in the form of
    host:port:servicename). Additionally, as it runs, the script prompts
    you for SYS User Names and Passwords for the Oracle Database
    instances for any Target Schemas and Oracle Workflows being upgraded.

Maybe you are looking for