Open Photoshop files in camera raw

Is there a way to open Photoshop files in camera raw
Thanks
Bob

Only tiff, jpeg, and camera raw files will open in ACR.
Detailed info: Creative Suite * Navigate, open, and save images in Camera Raw
Gene

Similar Messages

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Can photoshop open .jpg file in camera raw?

Can photoshop open .jpg file in camera raw?

Hi,
Yes.
Here's a post going over how to go about it:
http://www.photoshop.com/tutorials/7312
regards,
steve

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

Each camera needs a specific camera raw version (ACR). And each ACR is tied to a specific version of PS. See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Why can I no longer open jpeg files in camera raw in CS2? The option is grayed out in Bridge

I was forced to download CS2 from the web after Adobe stopped allowing me to register it from my disks and now I can no longer open files in camera raw. Am I missing something?

As far as i know, photoshop cs2 and adobe bridge 1 (cs2) could not open jpegs or tiffs into camera raw, only camera raw files.
I believe photoshop cs3 was the first version to allow jpegs to be opened in camera raw.
Are you sure you had photoshop cs2 before?
If on the other hand, you can't open camera raw files that you used to be able to open, then you probably just need to update the camera raw plugin to version 3.7
windows
Adobe - Photoshop : For Windows : Camera Raw 3.7 update
mac
Adobe - Photoshop : For Macintosh : Camera Raw 3.7 update

Bridge (2.1.1.9) in CS3 10.0.1 won't open psd file in Camera Raw

Why is File/"Open In Camera Raw" greyed out when I try to open a psd file in Bridge? It will open a jpeg file in Camera Raw. Thanks

As far as I know it is not an option to open PSDs in ACR.
It has to be JPEG or TIFF. (Or raw of course!)

Getting a message that Photoshop can't open a file because Camera Raw isn't supporting lens profile

For months, I have been using Lightroom 4.4, Camera Raw 7.4 with Photoshop CS5 and my Nikon D600 and Nikon AF-S Nikkor 24-85 3.5-4.5 lens. In my LR workflow, I enable Profile Corrections and there is a drop down for the lens model as well as a profile. Today, I am getting this message when I go to edit in Photoshop
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
I don't know what has changed, or what to do. Need some help

In Photoshop CS5 do Help / About Plug-ins… / Camera Raw and see what version it says and if there is more than one Camera Raw listed.
Unless CS5 was a typo, PS CS5 only supports up to ACR 6.7 which does not support the D600 so that is why you’re getting that message.
Why you weren’t getting the message, before, is the question. In LR’s preferences find the button that says something like Reset Warning Dialogs and click that, then the next time you try to open one of your raw files in CS5 from LR 4.x click Render using LR Adjustments and put a checkmark in Don't show this again, and you should be ok, although in this mode, LR creates a TIF or PSD (how ever you have it set up in the External Editors preferences) and PS opens that intermediate file.

Cannot open JPEG files in Camera Raw from Bridge

I am using Adobe Web Premium CS3 with Windows Vista. In Bridge under File, the "Open in Camera Raw" is grayed out. In preferences, I checked "Double-Click Edits Camera Raw Settings in Bridge" and when I double-click a JPEG file it still opens in Photoshop CS3. I've downloaded and installed the latest Camera Raw plugin (Camera Raw.8bi dated 3/27/2008) into Program Files/Common Files/Adobe/Plug-Ins/CS3/File Formats. Nothing seems to work.

I am experiencing the same problem under XP SP2. It is intermittent. Everything will be OK and then the next time I open the folder Camera Raw is not available.
I just did a little experiment. I created a sub-folder in the folder that would not produce Cam Raw and moved a jpg to it. When I right clicked it in the new folder, Cam Raw was there as it should be. I moved the jpg back to the original folder that had the problem and Cam Raw opened in that folder too, but not on any of the other jpg's in that folder.
I moved all of the jpg's to this sub folder and back and Cam Raw was there on all the jpg's.
There is without a doubt some real flakies in Bridge. I also have workspaces saved that suddenly are not saved any more.
Hope this helps out your problem Donald. Oh, I am using web premium CS3 also

Can't Open .NEF Files In Camera Raw CS3 - Windows 7

I have a Nikon D60, Windows 7 Professional (32bit) and Web Premium CS3.
I recently upgraded from XP to Windows 7.
I cannot get my Nikon's .NEF (Camera Raw) files to open when I select "Open in Camera Raw". I can see the .NEF thumbnails, but neither Photoshop or Bridge will open the files in Raw, you know where you can adjust all those killer settings non destructively.
I had cs3 installed on an XP machine and my .NEF files worked perfectly in Raw. Not so in Windows 7. I have tried to update to Camera Raw 5.6 but that wouldn't install. Is there an earlier version of CR that I can get and use, or any other advice would help.
Thanks

The last version of Camera Raw to work in Photoshop CS3 is version 4.6. If you HAD been able to open your D60 NEF files and now can not, then something changed...did you do a fresh install of CS3 under Win 7? If so you installed version 4.0 (what shipped with CS3). You'll need to go to the Camera Raw Updates for Windows and download an install version 4.6.

Bridge CS4 won't open .NEF file in camera raw

It says because photoshop CS4 does not recognize this type of file. I've opened plenty of Nikon .NEF files in Bridge. The difference is this is a D90 file and I've been getting D80 files. Is there a patch for newer camera models?

On a Mac I don't know which directory it should be in.
Camera Raw preferences: Bridge: menu Adobe Bridge/ Camera Raw preferences.
Inhere you can set the wished behavior for tiff. By default it shows tiffs
only in ACR when you choose to do so with right mouse click menu (open in
Camera Raw) or if the Tiff had earlier been altered in ACR, then it opens
automatically in ACR unless you choose not to do so.
About Plug in in Photoshop, Menu Photoshop/ about Plug In

Cannot open DNG files in Camera Raw hosted by Bridge?

I used Adobe DNG converter on a batch of NEF files (D300). The conversion was successful and the .dng files show up in Bridge with the right preview. However, when I double-click on any of these files, it launches Photoshop and opens the file in CR hosted by Photoshop. This in spite of having my preferences set to "Double Click Edits Camera Raw Settings in Bridge" in the Bridge preferences. Furthermore, a right-click (or control-click) on the file's thumbnail shows the Open With... item only has "Open with Adobe Photoshop CS3 (default)", and not the option to "Open with Camera Raw" that other RAW files have. Interestingly, if I do some editing in ACR, and click on "Done", then, right-click on the thumbnail, the missing options in the Open menu in Bridge re-appear!
I don't think this was happening before. Is this the expected behavior, or am I missing something?
My setup:
Bridge 2.1.1.9
Camera Raw 4.3.1
My computer:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version: 1.10f3
Regards,
Rafael

Problem solved. I had to delete the preferences file (resetting preferences by pressing the required keys when launching Bridge did not solve the problem).
I am glad I learned that trick by visiting this forum!

I've been using PScc for 2 months and suddenly when I open a file in camera raw and attempt to use the

radial, graduated and adjustment filters those and all the other options which do work are immediately "greyed out" and I've got to restart the computer to get rid. Assistance would be greatly appreciated. Win 8.1 64 bit

An ACR preference reset may help: Hold Ctrl+Alt+Shift as you open ACR. See video:
How To: Reset Camera Raw Preference File - YouTube
Benjamin

How do I open jpg files in camera raw?

I have read in numerous articles that I can open jpg files in ACR from within Elements 11. They all state to go File>Open, then browse to the jpg you wish to open, select Camera Raw from the file type and select the jpg. When I select the Camera Raw file type then all the jpg images disappear in the selection area or if I click the jpg first and then select Camera Raw and open then it says file not found. Am I doing this wrong or are the articles I am reading incorrect?

Hi Majortipper,
In Elements 11 go to File menu >> open as .
It will open a file open dialog where you have a "format" drop-down instead of format menu.
In Elemens 12 this "open as" is replaced with "Open in camera raw"
thanks,

Opening JPEG files from Camera RAW

Hi - I just installed ACR V4.1 on my PC. I have PS CS3 installed...My understanding is that from Bridge I could click on a JPG file and it would open ACR 4.1 directly.At the moment i click on the file and PS CS3 open and then it loads ACR.
Is this the normal behaviour ? before CS3/ACR 4.1 I use to hit CTR-r with genuine RAW/dng fileS and ACR loaded fine without loading CS3...
I checked the prefs in Adobe and they are set with preference to open JPEG/Tiff.s with ACR.
I wanted to point out that I also have Lightroom, not sure if any changes under LR would conflict opening the file with ACR...
Thanks for any help you could provide..
cheers,
A

The big advantage to editing JPEG images in ACR is that all the changes are made nondestructively, the same as in Lightroom. As with raw images, one of your Bridge options is to right-click on the image and clear the settings to restore the image to its original state, unless you saved a JPEG and replaced the original in Photoshop. The new sharpening and clarity controls in ACR 4.1 work as well on JPEG images as they do raw images. I prefer doing my initial editing in ACR regardless of whether I am working with JPEG or raw images.
A JPEG image is an 8-bit image. You can change your output options in ACR so that the image will be imported into Photoshop as a 16-bit image, but I'm not sure how much benefit will be gained from doing that. If you choose to do it this way, it will still be necessary for you to convert back to an 8-bit image before you will be able to save it as a JPEG again.

Open Photoshop files in camera raw

Similar Messages

Maybe you are looking for