Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath
Hi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath
Similar Messages
-
Issue opening Web Analysis report
I create, with buttons, links between reports in web analysis. Sometimes when I click on one of them in workspace, it doesn't open linked report, but another one. Furthermore this last one is automatically saved as the previous report, and I can't open the original linked report. Any suggestion about this ?
Thanks in advance.Hi Natesh,
Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
* Yes, the source is Essbase.*
If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
* The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
If source is based on a Relational SQL query, chances are that- Query is no longer valid.
* NA as this statement is NOT applicable to our source.*
If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
* This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
Could you please through more observation on this issue. Let me know if any further information is needed!.
Thanks for your time.
Regards,
Krishan
Edited by: user10475612 on Nov 8, 2009 1:07 PM
Edited by: user10475612 on Nov 8, 2009 1:09 PM
Edited by: user10475612 on Nov 8, 2009 1:12 PM -
Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
SharatHi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon -
Not able to open web analysis reports after upgradation
we have upgraded Hyperion 11.1.1.3 to 11.1.2.2 version, after this process we are not able to open web analysis reports
These reports are still pointing to old servers so, how to edit this database connection details in the new version??
Edited by: 1007326 on May 22, 2013 3:29 AMHi,
Welcome to Forums...!
I think we need to change the database connection details in the Web analysis.
goto file --> Edit --> browse the database connection then change the server name in the connection details.
may be this will help to resolve your issue.
Thanks,
mady -
Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.
I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
The same thing happens in chrome and firefox but safari on my iPad works just fine.
I have the latest version of everything
I assume there is a system problem but cleaning up permissions does not help -
S_ALR_87012178 Report -Issue Related to Interest calculations
Hi,
When we run a customer open item analysis S_ALR-87012178 we see that there looks to be interest for overdue balances showing on the report. It doesn't appear to be assigning the interst to the customer, but I wanted to see why this was here and if we have the ability to assing interest to balances. And also where you would turn this on and off in the system or for a customer.
Kindly adivce me on this issue.i am confused because i didnot understand what they are asking.
Thanks
SunithaHi,
You can go to F.99 in order to see all the reports for Customers.
Hope you will find the best suitable report.
When you are using "Drill down reports" do not forget to select
"Object list (more than one lead column)" this would give you a option to sort them the line items as you want.
Just for your information: SAP1 is the transaction code for all the reports in SAP.
Regards,
Ravi -
Open order qty,Delivered qty,issued qty, and closing stock---Tables
Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopalHi,
Try EKPO & EKBE tables..
Thx
Raju -
Vendor Open Item Analysis by Overdue Items
Hi Freinds,
The users desire to generate the Vendor Open Item Analysis by Overdue Items. When the report is generated using the Program RFKOPR10, the report gives the list of Vendors with the details of overdues as per the buckets selected. However, along with the Vendor Codes, the list gives the short name of the Vendor, which is picked form the 'Search Feild' in the Vendor Master and is the short name, whereas the users desire to have the full name exhibited in the report.
How can we have the full name in the report instead of the short name? Can any one help us in this matter?
Thanks for the assistance.
RegardsHello Pankaj,
Thanks for the prompt response. Our problem is that we require an AP Aging Analysis giving the overdue amounts by days - such as 30/60/90/120/>120. We are able to get the report but the name is not appearing in full. How can we have the full name displayed in the Report?
Regards -
Due Date Analysis in Report Painter
Hi:
I have a query regarding Report painter FKI1 to FKI6 for Vendor aging analysis. Aging reports build from report enable user to analyze all vendors invoices which are overdue by N of days you specify for every column e.g all invoices overdue btw 0-30, 30-60 and so on but client is requiring an aging report for AP & AR which shows how old an invoice is, our baseline date is document date for all payment terms. e.g we have four columns in report 0-30,30-60,60-90 and >120. If an invoice was created with a document date 25.12.2014 which though not due should appear in 0-30 days. I need to know if its possible within report painter to have such or i will have to go for ABAP.
ThanksHello Atif,
Your requirement can be fulfilled by report painter
1- build a form with structure one axis with key figure
2- create required N days columns
3- use characteristic (Due date analysis with value =1) for analysis of line items due.
4- use characteristic (Days for net due date ) with value from/ to N days.
5- define a report with desired characteristics ( vendor, document number ....)
Regarding to you example
define column 0-30 as a sum formula of the following 2 columns
a column "0-30 due" with characteristics
(Due date analysis with value = 1) and
(Days for net due date with value from 0 to 30)
define another one "not due" with characteristics
(Due date analysis with value = 2) and
(Days for net due date with value from 0 to 99999)
for more information you can check the following standard reports delivered by SAP:
AP/ FKI0 >> report 0SAPDUEAN-01 Due Date Analysis for Open Items
AR/ FDI0 >> report 0SAPDUEAN-01 Due Date Analysis for Open Items
Regards,
Ibrahim -
Need Drill down in Customer Open Item Analysis by Balance of Overdue Items
In SAP there is one standard report by the name of
'Customer Open Item Analysis by Balance of Overdue Items'
Can I change the report according to my need.. I want to add drill down and customer name to this report. I am using summarisation 6 as my criteria.
Thanks
Sajid HakeemDave!
Thanks for the help man
Just one last thing
can you help us to add drill down facility in the prescribed report. what code we should write to make it drill down to a line item report.
Regards
Sajid Hakeem -
1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
MallikarjunaHi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu -
== Issue
==
Firefox is crashing or closing unexpectedly
== Description
==
Firefox 3.6.3 crashes when opening and the Crash Report [[@ strlen nspr4.dll@0x15f9f ]. It was working perfectly fine and the last three days, I am having difficulty in opening firefox. It crashes with the above crash report every time I open. I came across the bad image error and did a clean reinstall multiple times and that did not help. I have firebug and firecookies as an addon.
== Crash ID(s)
==
bp-5972b384-791f-4667-b3cb-051812100504
== Firefox version
==
3.6
== Operating system
==
windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5
== Plugins installed
==
firebug and firecookieUsually doesn't immediately crash, although that happens also. Usually hangs, then crashes.
Addons are WHY I use Firefox when it works. I am NOT on the bleeding edge any longer. I could go back to boring, boring, Chrome. -
Opening up SQL Server Reporting Services in Internet Explorer
Previously I had installed SQL Server 2012 Database Engine Services. Now I am being asked to install Reporting Services - Native. When I get to the Reporting Services Configuration the Reporting Services"Install and configure" is greyed
out. I can only install by selecting the "Install only". Then I went into the Reporting Services Configuration Manager and configured the report server for native mode. However, when I open up IE on my laptop and try to connect
to the http://ServerNameHere/Reports/Pages/Settings.aspx I get the Internet Explorer cannot display the webpage. When I have installed Reporting Services in the past it was always at the
same time I installed the Database Engine Services and I was always able to select the option "Install and Congfigure". When I would open up
http://ServerNameHere/Reports/Pages/Settings.aspx I would never have an issue.
What am I missing? Why won't it open up in
http://ServerNameHere/Reports/Pages/Settings.aspx on my laptop? On the server itself it will open up. But not on my laptop.
On my laptop I can open up other Reporting Services on other servers.
lcerniHi lcerni,
Glad to heard that the issue had been solved and thanks for your sharing. It will be very beneficial for other community members who have similar questions.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Not able to pick Opening Balance in Ageing Report
Hi
I have made an query for customer ageing report based on our requirement, but am not able to fetch the OB (Opening Balance) in that. If i generate Customer ageing report from B1, its showing the OB in the first line, then it showing the open invoices on the corresponding ageing days.
Can anyone help me to fetch the opening balance in ageing report. Below is the query i have given for ageing.
SELECT NNM1.Remark AS Branch, OINV.DocNum, OINV.NumAtCard AS VendorRef, OINV.DocType AS Type, OINV.DocStatus AS Status, OINV.DocDate,
OINV.DocDueDate, OINV.CardCode, OINV.CardName, OINV.DocTotal, OINV.PaidToDate AS [Paid/Credited],
OINV.DocTotal - OINV.PaidToDate AS [Balance Due], (CASE WHEN DateDiff(dd, OINV.DocDate, getdate()) BETWEEN - 120 AND
0 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS 'Less then Due Date', (CASE WHEN DateDiff(dd, OINV.DocDate, getdate()) BETWEEN 0 AND
30 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS '0 - 30', (CASE WHEN DateDiff(dd, OINV.DocDate, getdate()) BETWEEN 31 AND
45 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS '30 - 45', (CASE WHEN DateDiff(dd, OINV.DocDate, getdate()) BETWEEN 46 AND
60 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS '45 - 60', (CASE WHEN DateDiff(dd, OINV.DocDate, getdate()) BETWEEN 61 AND
90 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS '60-90', (CASE WHEN DateDiff(dd, OINV.DocDate, getdate()) BETWEEN 91 AND
120 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS '90-120', (CASE WHEN DateDiff(dd, OINV.DocDate, getdate())
> 120 THEN (OINV.DocTotal - OINV.PaidToDate) END) AS '120 +', OSLP.SlpName, OUBR.Name
FROM OINV AS OINV INNER JOIN
NNM1 AS NNM1 ON OINV.Series = NNM1.Series INNER JOIN
OSLP ON OINV.SlpCode = OSLP.SlpCode INNER JOIN
OHEM ON OSLP.SlpCode = OHEM.salesPrson INNER JOIN
OUBR ON OHEM.branch = OUBR.Code
WHERE (OINV.DocStatus = 'O') AND (OUBR.Code IN (@Branch)) AND (OSLP.SlpCode IN (@SalesEmployee))
ORDER BY OINV.CardName, OSLP.SlpName
How to add the OB in the above query.Check note 1023083 and for information about the expected release date of the patch please view note 578944.this problem is related to the new SAP GUI 7 patch-level 0. There is something wrong with the GUI function to get information from the local registry (CL_GUI_FRONTEND_SERVICES=>REGISTRY_GET_VALUE).
We had the same issue sometime back and we applied the patch. I have the patch but it will be a huge file to send over internet. See the above notes and you should be able to apply the required patch.
Also check Note
Note 696069 below:
Summary
Symptom
No Data is displayed when View is changed from ALV to Excel Inplace on
ALV Grid. This Happens with Office XP/2003/2007.
Other terms
Excel inplace, Excel, ALV, Office 2003, Office XP, office 2007
Reason and Prerequisites
With newer release of MS Office (XP/2003/2007) Microsoft added new security settings/options for Visual Basic project and Macros. Excel Inplace uses Visual Basic Project and macro functionality of MS Office. If the setting for Macro security is High (which automatically disables macro or if access to Visual Basic Project is suppressed then Excel Inplace doesn't show any Data in Excel.
Solution
Required settings in MS office XP and MS Office 2003:
To use the Excel Inplace functionality make sure the security settings for Macro is set to Medium and the option "Trust access to Visual Basic Project" must be checked on Tools->Macro->Security->Trusted Sources tab.
Required settings in Office 2007:
Please see the video file in attachments of this note.
This is required with MS Office XP, MS Office 2003, MS Office 2007.
Header Data
Release Status: Released for Customer
Released on: 22.12.2006 14:47:01
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-FES-OFFI SAP Desktop Office Integration
Secondary Components: BC-FES-XXL XXL List Viewer/Lotus Connections
Reward points if this help
Sanghamitra
Message was edited by:
Sanghamitra11 -
Smartview BI Prompt report issue
Hi friends,
Im in obiee 11.1.1.7 where i downloaded smartview plugin for my 32 bit windows machine and established connection to the BI catalog to access the BI objects.
Now i can access the catalog objects in smartview and can created reports within the smartview and also i can see the saved report from the smartview in BI(back). Suppose if i saved a report with a prompt in bi and if i open the same prompted report in smartview(i.e) if i clicked the prompted report in smartview it is not asking for the prompt dialog box instead it is returning the below error in smart view like
Object reference not set to an instance of an object
What could be the reason behind the above error and how to fix the above issue friends.
Thanks in advance.
Regards,
SaroHi,
Can you please check by using Run Time Prompt variable for the same. Also try to disable and enable the Smartview addin. If this do not work then try with a different Smartview Version.
Soumya
Maybe you are looking for
-
Ichat 4... Keeps crashing when I try to Im someone
When I try to send an instant message to someone the instant message box comes up blank without the recipients name. Then I will try to click on the persons name to send a message Ichat crashes. I have deleted the 4 files in the library and have trie
-
What is the latest Mac OS X I can download from apple for the eMac?
I want to update the OS X on my eMac, but can not afford OS X 10.5.8. I currently have OS X 10.4.11. I am looking for the latest OS X I can download for free from apple or any other website that will carry a newer OS X for my eMac. I did find a disk
-
Why is my iTunes gift card not properly activating
Why won't my iTunes gift card properly activate
-
I can't double click in order to open file or folder
Dear apple support team, I have the problem with open file or folder when using Mountain Lion, I can't open file or folder by double click in it. With Lion i can do it. Please advice for me, i feel use Mountain Lion is difficult.
-
PDF Multiparts/byteranges issue
Hi All, I have issues downloading large PDF files (greater than ~ 1 mb) that I publish in the Portal. I can 'save' the PDF to my local computer, but when I choose open, it seems that the PDF file is downloaded in multiple parts (the first mime type