Open PO in production Client

hello Guru ji tell me below scenario
PO Not Showing in 0001 Client (production )
Please open case to determine why the following transaction failed to create a PO in 0001. (prodution client)
some body has(take it as sunil)entered the following data on 5/10/07 (at 3:50 pm boston time). As of 5/15/07 at 4:00 pm there is no open PO showing in 0001 client(production) for this item and quantity.
Item 13280039
96,000 planning units (PU)
From Toy (0000086495)
To VA01
Load ID: DTLB0518
This item has been shipping to VA01 without problems for 2 years until now. I dont know if its related, but I have seen recent correspondence indicating that changes to data tables effected the master data for some Hemisphere Zooth items.
Please investigate and
say me how to resolve thsi case
regards
sapman

Hi Sapman man,
Are you really just cutting and pasting calls that you are receiving to this forum?
This type of problem depends totally on your own configuration and master data .
How are we supposed to be able to understand your business terminology and settings?
Not only this but it is virtually impossible to understand what the problem is?
It sounds like someone thinks that they have created a PO and yet it does not appear?
This could be for so many reasons, you really should try the obvious ones before you ask us to solve calls for you.
Did the user save?
Did they get a PO number?
Did they Hold the PO?
Has it been blocked via a release strategy?
We will try to help where we can but I am not sure that you are putting in as much effort as you should be to remove any obvious errors before you pass them on to us.
Steve B

Similar Messages

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

Effects of delecting purchasing groups in production client - URGENT Please

Hi All,
If an existing purchasing group is deleted from the production client will it affect any of the open purchase order or any other functionality.
Thanks in advance.Please respond.
Thanks & regards,
Navin

Yes,, If any purchasing document yoou willl bring in a change mode then system will give an error, adn you can loose the reporting facility by purchase group.

Maintaining Posting Periods on productive client.

hi all.
Is there any way of maintaining posting periods "OB52" (IMG activity) without changing the status of productive client to modifiable. I know one way is to maintain the posting periods in dev and then transport. Is there any other way? (directly in production) and also what is the recommended method for doing this.

Hello Rizwan,
You can maintan OB52 in productive client by keeping the client as productive.The settings in SCC4 have to be like this :
Client Role: Production
Changes and Transport for client specific objects: Not allowed.
Client Independent object changes: No changes to Repository and cross client authorization objects allowed.
These settings will allow users to maintain OB52 in production clients but won't allow them access to maintain general customizing.
Further you would need to assign authorizations for S_TABU_DIS as mentioned by Barry.
OB52 is nothing but a view of table T001B. The authorization group for T001B table in table maintainence generator is FC31.
So whosever needs to maintain OB52 needs to have proper authorization for this table via S_TABU_DIS.
The values assigned have to be :
Activity 02,03
Authorization Group: FC31.
Also you can check whether OB52 is allowed for maintainence in production.
For this go to transaction SOBJ. Then check the check box against enter conditions and click on display. A pop up would come up. here you can give the view name V_T001B. In the resulting screen check for the check box against Current Settings. If it is checked then OB52 is open for maintainence in production client.
There is one more method:
Go to SPRO. Then to SAP Reference IMG. Go to the node for opening and closing posting periods. You can also search for this using Control+F option. Use the search string " Open and Close Posting Periods".
Once there click on it. Then in menu bar go to EDIT and then to display IMG activity. In the next screen to go tab Maint. objects under the selection block Assigned objects. Here you will find an entry for table V_T001B. Double click on it a new screen appears. Here just check if the check box against current settings is checked. If it is then OB52 can be maitained in production clients.
Please award points if the answer was helpful to you.
With Regards.
Ruchit

Any Mozilla product I install crashes at startup. The first window I see when I open a Mozilla product is the crash reporter. I have tried every possible solution but cannot open anything. It started with firefox. Can anyone please help?

Hi there, as the question says, I cannot open any Mozilla product. I have tried to install firefox 3.6, older versions of Firefox, Firefox 4.0, Sea Monkey, Thunder Bird and Sun Bird. I have the same problem everytime. I open any of these programs and the first and the only window that appears is the crash reporter. I've tried opening it in Safe Mode and the same occurs. I have tried entirely uninstalling the products incuding the registry keys but no help. I shall post the detailed error reports, if they help solving this issue. Can you kindly look into this and find a solution as I use all of these Mozilla products and my life has been a hell since they've ben down.
Seamonkey Error Report:
Add-ons: [email protected]:2.0.4,{59c81df5-4b7a-477b-912d-4e0fdf64e5f2}:0.9.85,{f13b157f-b174-47e7-a34d-4815ddfdfeb8}:0.9.87.4,[email protected]:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:1.0
BuildID: 20101123124820
CrashTime: 1296412292
InstallTime: 1296412283
ProductName: SeaMonkey
StartupTime: 1296412291
Theme: classic/1.0
Throttleable: 1
URL:
Vendor: Mozilla
Version: 2.0.11
This report also contains technical information about the state of the application when it crashed.
Sunbird Error Report:
Add-ons: [email protected]:1.2009p,{e2fda1a4-762b-4020-b5ad-a41df1933103}:1.0b1,{972ce4c6-7e08-4474-a285-3208198ce6fd}:2.0
BuildID: 20091211101839
CrashTime: 1296413028
InstallTime: 1296411446
ProductName: Sunbird
SecondsSinceLastCrash: 1578
StartupTime: 1296413025
Theme: classic/1.0
Throttleable: 1
URL:
Vendor: Mozilla
Version: 1.0b1
This report also contains technical information about the state of the application when it crashed.

Did you find a solution?
Same problem over here as well, FF 7 is ok but FF8 / FF9 and Thunderbird 8 / 9 crash on startup.
They both work if I start them in safe mode with everything enabled.

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

How to open (run) report on client in excel ?

Hello experts,
i am using ERP having forms 10g and database 10g.
in current scenario , when i run report , i will run in PDF format.
when there is need to convert it in Excel then i have to use software Rep2Excel.exe software in d2k's HTML folder (form->tolls->web->html)folder on oracle server . and has to call with report with rp2rro package. report convert in excel and save in html folder
in excel. so i have to access server to get the excel file.
now i am plan that when i run oracle report in excel than it open in excel at clients system.
below is the code which i used at button use to convert in excel from rdf report
pl_id := Create_Parameter_List('tmpdata');
          Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
               Add_Parameter(pl_id,'LOCN_CODE',TEXT_PARAMETER,:global.company_gl_locn);
               Add_Parameter(pl_id,'comp',TEXT_PARAMETER,:global.company_name);
          Add_Parameter(pl_id, 'TO_DaTe', TEXT_PARAMETER, :block_m.todate);
    Add_Parameter(pl_id, 'FRom_DaTe', TEXT_PARAMETER, :block_m.FROMDATE);
    Add_Parameter(pl_id, 'PROD_TYPE', TEXT_PARAMETER, :block_m.FROM_STORE);
    --Add_Parameter(pl_id, 'store_code', TEXT_PARAMETER, :from_store);
          message(123);pause;
rp2rro.setdesformat('html');
rp2rro.setdestype('file');
rp2rro.setdesname(:global.path_f||temp||'.html');
rp2rro.rp2rro_Run_Product ( REPORTS, :GLOBAL.PATH||temp||'.RDF', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
host(:global.path_f||'rep2excel -i:'||:global.path_f||temp||'.html -o:'||:global.path_f||temp||'.xls');
:global.path_del_f:=:global.path_f||temp||'.*';
value of
:GLOBAL.PATH   :='E:\PROJECT\'; (server)
        :GLOBAL.PATH_f   :='f:\DevSuiteHome_1\tools\web\html\'; (server)
temp contains the name of rdf report file.thanks
yash

Hello,
_Pls follow these guide lines for ensuring proper output in Microsoft Excel:
1.First compare the fields properties and the frames properties between the reports created with wizard and the reports created manually.
2. Do not leave any space between two adjacent objects.
Explanation: Because any space, including a few pixels, between two adjacent objects will result in an empty cell or column in Excel output
3.Make sure that the widths of all objects are vertically consistent.
Explanation: If the objects are not exactly aligned vertically, that is, have inconsistent widths, it is likely to result in insertion of unwanted cells/columns in Excel.
4. Pls. Make sure that the vertical elasticity of the frames and repeating frames is not fixed unless you are sure you have allocated enough space to accommodate all the records.
Explanation: If you set the Vertical Elasticity property of a frame to Fixed, the output in Excel will show only as many records as could appear on the first page of the paper output. Since Excel does not have a page concept, it is not able to overflow the remaining rows to the next page.
5. For reliable formatting of spreadsheet output, enclose the whole layout area in a frame.
Explanation: This action prevents the possibility of parallel objects displaying in different vertical positions, one following the other.
Hope this helps.
Regards,
Alex

UCM 11g gives error while opening systemproperties in production

UCM 11g is giving error while opening systemproperties in production mode, it says root user cannot install it.Please suggest.

do you have any directories owned by root? I've seen some nfs issues change ownership of mounted directories when they're remounted.
is anything in the /bin/ directory owned by root?
I think you should be safe to chown back to your install user.
-ryan

Open Office files in client application in Sharepoint Search

Is there a way to have all users of a SharePoint farm open Office documents that show up as search results in our Enterprise Search Center within their client applications and not in the Office Web Apps?
I know i can do this manually for me from the Search Result page > Preferences. But is there a way to do this
automatically for every user? Couldn't find it on the internet.
Thanks in advance!!

Hi Simon,
According to your description, my understanding is that you want to open office documents in client application in SharePoint Search results.
In order to open search results in the client application, you had to alter the Item_CommonItem_Body.html search results display template.
More detailed information:
http://richardstk.com/2013/10/25/open-sharepoint-2013-search-results-in-the-client-application/
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Assign a Logical System Name of a production client

Hi everybody,
We have an ERP system (now upgraded to ECC 6.0) that is in productive use since 7 years. Until now, no Logical System Name have been assigned to the production client - the field in transaction SCC4 is empty/blank.
Now we plan to implement a BW, so a test and a productive BW systems have been installed. According to the attached file and content of note 184447 we choose to use "Option 1: Uniform Logical System names clients by system type" for naming convention for LSN's.
All the systems/clients (BW test and productive, ERP test only) now are assigned with corresponding LSN's, except the production ERP client. It is still without LSN and the client is not defined as Source System for productive BW system.
So, my question is:
Should I expect any problems if the LSN of the production client is set up now, after long time, effective productive use?
I would mention that this is infact initial setup, not a change of LSN. Therefore transaction BDLS is not relevant, I think.
Thanks in advance

Hi DB49,
I already did an initial setup of LSN in the test ERP client (that client is copy of the productive ERP client, i.e. the LSN has not been set). And everything seems to be OK.
But the documentation says that ".... In a production system, the logical system must not be changed ...".
"Changed" is not "ïnitial setup" of course, so there will not be any problems I hope, but ...
SCC4 --> LSN field --> F1 -->
"System in which applications run integrated on a shared data basis.
The distribution of data between systems requires that each system in the network has a unique identification. The logical system is used for this purpose.
In the SAP System the client corresponds to a logical system. You can assign a logical system to a client in the client maintenance (choose Goto -> Detail).
The logical system is relevant in the following SAP areas:
ALE general: two or more logical systems communicate with one another.
ALE - ALE business processes (for example, cost center accounting): definition of a system where a specific application runs. Changes to master data can only be made in this system, for example.
Workflow objects: the logical system in which the object is located is always included in an object's key.
When maintaining the logical system, note the following:
The logical system must be unique company-wide. It must not be used by any other system in the ALE integrated group. In a production system, the logical system must not be changed. If the logical system of a document reference is not set to initial and does not match your own, the system assumes the document is located in a different system."

How to Changing Productive Client in an ABAP+Java System?

How to Changing Productive Client in an ABAP+Java System?

1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME

I downloaded a adobe flash update and my computer and after next logon got a blue screen. could only start in safe mode and until uninstalling the flash player could i safe mode with networking. i cannot open any microsoft products now. I get a message

i downloaded an adobe flash update and my computer after next logon got a blue screen. I could only start in safe mode and until uninstalling the flash player could i start in safe mode with networking. i cannot open any microsoft products now. I get a message saying adobe acrobat 10 is not designed to run on windows or uninstall and reinstall it ....but it will not let me uninstall it. What do i do? is this all an adobe issue or a windows problem?? thanks Tim

Hate to suggest this, but you need to ask in the Flash forum. This forum is for Acrobat.

Open Search Results in client application

Hi,
I try to use the following post
http://richardstk.com/2013/10/25/open-sharepoint-2013-search-results-in-the-client-application/
in order to open search results in client application.
1. Can someone help where should i add the statement ctx.ScriptApplicationManager.states.openDocumentsInClient = "true"; ?
(I did but no effect on how result open)
2. Will it work also on files which are not Office Docs?
keren tsur

Hi keren tsur,
You have to add the code mentioned in the article inside your search display template
"Item_CommonItem_Body.html"
which will be located in your share point web application at
"Site settings --> Master pages and page layouts.
In the Master Page Gallery, click Display Templates --> Search".
Once you edit and save the "Item_CommonItem_Body.html" file, upload it back to search display
templates gallery at the above location then publish the file,then it will update the corresponding JavaScript file.
Yes it will open all your office docs in client application once you update your display template as explained in the article.
Regards,
Please remember to click Mark as Answer on the answer if it helps you

One production client in one server

Hi friends,
i have proposal to install two production clients in one single server (single database).
What is sap recommendation, what is the advantage and disadvantage.
Please let me know sap recommendation in this issue.
***Please provide sap documentation proof.***
Regards,
satish

Please tell me: What exactly to you want?
Nobody will tell you how many clients you may or may not copy in your system as well as nobody can tell you, neither here nor in a document, how many stocks, plants etc. are "default".
The implementation partner should have an organizational concept, how to build up the system, this is nothing that comes from SAP but is depending on your project, your company, location etc.
Markus

Adding new project mask in Production Client

Hi,
I have requirement of adding new project mask code for Production client.
As SAP standard functionality does not allow you to add any new project
mask once you create a project .So if I try to add new mask system will not
show me projects already created and released.Is there any solution to this
problem?
Ranjit

Hi Ranjit,
You did not specify exactly what type of new mask you are adding. For example, maybe you simply need to modify an existing code. You can make two changes to existing codes that have projects created.
1. You can extend the length of the mask to the complete 24 characters, if not already 24 characters.
2. You can change any 0 (numeric only) character in the mask to an X (allows alphanumeric).
The best means to see what project codes are already in use, you should run SE16 for table PROJ and PRPS. You want to view the fields in PROJ-PSPNR and/or PROJ-PSPID as well as PRPS-PSPNR and PRPS-POSID. So, any project code beginning values (A, B, C, etc; 1, 2, 3, etc) displayed cannot be setup as new project codes.
Yes, you could delete the old project codes after archiving the structures, but you also have to (or should) archive any associated financial documents. As the previous responder stated, this is not a trivial task.
Points appreciated....
Regards,
Kent Bettisworth

Open PO in production Client

Similar Messages

Maybe you are looking for