Open Port on RV110W

I have installed QuickBooks 2015 on my server.
Our firewall is being managed by our Cisco RV110W.
Our server is running Windows Server 2003.
I have read several KB articles and in order to get QB to function properly across the network in multi user mode, I have to open the following ports in order to get QB Database Server Manager to work.
Make sure TCP is selected and type in the following ports for your year of QuickBooks: (if you have multiple years of QuickBooks installed or will be using, you will need to add each years ports as well in this format: 8019, XXXXX, XXXXX, XXXXX, XXXXX).
QuickBooks 2015: 8019, 56725, 55363-55367
I do not know how to do this, and would really appreciate a walkthrough if someone was willing to help.
Jason

Jason,
Browse to Firewall-> Single Port Forwarding.
Find a blank space and enter QB1 (Application).
Enter the External and Internal Port as 8019.
Select TCP for protocol.
Enter the LAN IP address of the Quickbooks computer.
Check Enable.
Repeat for port 56725, except name the Application QB2 or something.
Save at the bottom of the page.
Browse to Firewall-> Port Range Forwarding
Application: QB3 (Make something up)
Start: 55363
End: 55367
Protocol: TCP
IP Address: Same as above, IP address of Quickbooks computer
Check: Enable
Save
Browse to: http://www.yougetsignal.com/tools/open-ports/
Enter port number 8019 and press Check. The port should be open.
Please let us know the results.
- Marty

Similar Messages

I have a game on my xbox one that is telling me I need to open ports in order to play it I am not all that tech savvy and have no idea how to do this

I have an airport extreme and I am trying to play a new game on my xbox one and it keeps kicking me I have comcast internet that is more than fast enough so I went to the games site and it says I need to either create a static ip or to open ports no idea how to do either of these or what that does any help would be appreciated.

There are heaps of posts here about how to open ports on apple routers specifically for xboxes.
AirPort Extreme and xbox 360

Open ports in zones

I am encountering a strange behavior in new zones created using zonemgr 2.0.6 (this is the only way I create zones, so I do not know if the issue is more general). When I create a new zone, two strange things are happening:
1. Immediately after the zone is created, no services are running, not even ssh
2. About 10 minutes later, a whole bunch of services are running. Most of these are not running on the global zone.
For reference, nmap output on the global zone is the following:
[dcomsm1@dcomsm1:~] $ nmap t2000
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 20:51 EST
Interesting ports on 131.247.16.134:
Not shown: 991 closed ports
PORT STATE SERVICE
22/tcp open ssh
111/tcp open rpcbind
2161/tcp open apc-agent
3052/tcp open powerchute
4045/tcp open lockd
32774/tcp open sometimes-rpc11
32775/tcp open sometimes-rpc13
32776/tcp open sometimes-rpc15
32777/tcp open sometimes-rpc17
The new zone is created using the following zonemgr arguments:
[root@t2000:~/zonecfgs] # more ./temp.sh
#!/usr/bin/bash
./zonemgr -a add -n drenkhah -z "/export/zones" -P "root_pw" -I "131.247.16.159|e1000g0|25|drenkhah" -R "/root|/usr/bin/bash" -s "basic|lock"
zone creation output is as follows:
[root@t2000:~/zonecfgs] # ./temp.sh
Checking to see if the zone IP address (131.247.16.159) is already in use...IP is available.
cannot create '/drenkhah': leading slash in name
chmod: WARNING: can't access /export/zones/drenkhah
chown: /export/zones/drenkhah: No such file or directory
Zone drenkhah will be placed in the following directory: /export/zones/drenkhah
Preparing to install zone <drenkhah>.
Creating list of files to copy from the global zone.
Copying <2568> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1042> packages on the zone.
Initialized <1042> packages on zone.
Zone <drenkhah> is initialized.
The file </export/zones/drenkhah/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
Creating the sysidcfg file for automated zone configuration.
Booting zone for the first time.
Waiting for first boot tasks to complete.
Waiting for automatic post-install reboot to complete
Updating netmask information.
Updating /etc/inet/hosts of the global zone with the drenkhah IP information.
Generating ssh host keys. Details in the (/root/.zonemgr/zone28330-ssh.log) file.
svcadm: Pattern 'svc:/network/ssh' doesn't match any instances
Setting the root user's home directory to /root
Setting the root user's shell to /usr/bin/bash
Disabling un-necessary services via basic method for the default services.
Zone drenkhah is complete and ready to use.
nmap output just after creating the zone is as follows:
[dcomsm1@dcomsm1:~] $ nmap drenkhah
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 17:53 EST
All 1000 scanned ports on 131.247.16.159 are closed
Nmap done: 1 IP address (1 host up) scanned in 29.39 seconds
nmap output 17 minutes later is as follows:
[dcomsm1@dcomsm1:~] $ nmap drenkhah
Starting Nmap 5.00 ( http://nmap.org ) at 2010-02-28 18:10 EST
Interesting ports on 131.247.16.159:
Not shown: 986 closed ports
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
23/tcp open telnet
25/tcp open smtp
79/tcp open finger
111/tcp open rpcbind
513/tcp open login
514/tcp open shell
587/tcp open submission
4045/tcp open lockd
6112/tcp open dtspc
6788/tcp open unknown
6789/tcp open ibm-db2-admin
7100/tcp open font-service
Nmap done: 1 IP address (1 host up) scanned in 29.25 seconds
Note that there are many open ports
# uname -a
SunOS t2000 5.10 Generic_137137-09 sun4v sparc SUNW,Sun-Fire-T200
Thanks
Manish

The Leopard OS X firewall is application based and not port based. Honestly, I haven't played with it enough to know for certain how to answer your question.
But... when you do connection sharing, you're essentially doing a port based NAT for the systems on the other side of your Mac. This pretty much keeps you from initiating anything to the other system even without a local firewall unless you were to configure port forwarding.
As for blocking packets, you would need to use the 'ipfw' command to do things at the port level.

Open port 5000 through 5005

Hello Rogue Amoeba support tells me, in order to get the Airfoil Speakers software to function, I must open port 5000 through 5005 on my router (WRT54G). I have scoured the .pdf manual, perused the web support site as well as the present forums. Mostly, I don’t know what much of this stuff means so I may have inadvertently passed up what I need to know. Mainly, I don’t want to screw up the router function as it is working just dandy. For all I know, ports 5000 through 5005 are already open. If anyone can give me some guidance in plain English, I would certainly appreciate it. Thanks.

Log in to the router set-up page. To do this, open up a web browser ( Internet Explorer , Firefox etc) and type on the address bar your default gateway (if left alone, it is usually 192.168.1.1). Just leave it's username blank, password as a default is admin.
Go to the Applications and Gaming tab then go to the Port Triggering subtab. Start port is 5000 and end is 5005 for both Triggered and Forwarded range.

Help open port on ASA5510 (version 8.3)

Hi all,
I configured ASA to open port 21, 3389, 5900 (outside access in) but when i check port just success : 21 and 3389, Error: 5900
If i configured with only one port 5900 or 3389, is't ok, i don't undesrtand what 's the problem?
ASA5510>
ASA5510> ena
Password: ***********************
ASA5510# show run
: Saved
ASA Version 8.3(1)
hostname ASA5510
domain-name lohoi.local
enable password *********************** encrypted
passwd *********************** encrypted
names
interface Ethernet0/0
description Connect_to_Modem
nameif outside
security-level 0
ip address 10.0.0.2 255.255.255.0
interface Ethernet0/1
description Connect_to_Router2911
nameif inside
security-level 100
ip address 172.16.17.2 255.255.255.240
interface Ethernet0/2
shutdown
no na
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
description Management
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
clock timezone ICT 7
dns server-group DefaultDNS
domain-name lohoi.local
object network obj-any
subnet 0.0.0.0 0.0.0.0
object network ftpserver
host 192.168.88.90
description FTP server
object network Remote_Desktop
host 192.168.100.29
object network VNC
host 192.168.100.4
access-list 101 extended permit icmp any any
access-list 101 extended permit icmp any any echo-reply
access-list 101 extended permit tcp any any
access-list outside_access_in extended permit tcp any object ftpserver eq ftp
access-list outside_in extended permit tcp any host 192.168.100.29
access-list outside_in extended permit tcp any host 192.168.100.4
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst
asdm image disk0:/asdm-631.bin
asdm history enable
arp timeout 14400
object network obj-any
nat (inside,outside) dynamic interface
object network ftpserver
nat (inside,outside) static interface service tcp ftp ftp
object network Remote_Desktop
nat (inside,outside) static interface service tcp 3389 3389
object network VNC
nat (inside,outside) static interface service tcp 5900 5900
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.1 1
route inside 192.168.88.64 255.255.255.224 1
route inside 192.168.100.0 255.255.255.0 172.16.17.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http authentication-certificate inside
http authentication-certificate management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password *********************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:667cb3ec729681c78ccab9a57abd89df
: end
ASA5510#

ASA5510# show run
: Saved
ASA Version 8.3(1)
hostname ASA5510
domain-name lohoi.local
enable password ****************** encrypted
passwd ****************** encrypted
names
interface Ethernet0/0
description Connect_to_Modem
nameif outside
security-level 0
ip address 10.0.0.2 255.255.255.0
interface Ethernet0/1
description Connect_to_Router2911
nameif inside
security-level 100
ip address 172.16.17.2 255.255.255.240
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
description Management
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
clock timezone ICT 7
dns server-group DefaultDNS
domain-name lohoi.local
object network obj-any
subnet 0.0.0.0 0.0.0.0
object network ftpserver
host 192.168.88.90
description FTP server
object network remote_desktop
host 192.168.100.2
object network remote_vnc
host 192.168.100.4
access-list 101 extended permit icmp any any
access-list 101 extended permit icmp any any echo-reply
access-list 101 extended permit tcp any any
access-list outside_access_in extended permit tcp any object ftpserver eq ftp
access-list outside_access_in extended permit tcp any host 192.168.100.4 eq 5900
access-list outside_access_in extended permit tcp any host 192.168.100.2 eq 3389
pager lines 24
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asd
asdm history enable
arp timeout 14400
object network obj-any
nat (inside,outside) dynamic interface
object network ftpserver
nat (inside,outside) static interface service tcp ftp ftp
object network remote_desktop
nat (inside,outside) static interface service tcp 3389 3389
object network remote_vnc
nat (inside,outside) static interface service tcp 5900 5900
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.0.0.1 1
route inside 192.168.88.64 255.255.255.224 172.16.17.1 1
route inside 192.168.100.0 255.255.255.0 172.16.17.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http authentication-certificate inside
http authentication-certificate management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password ****************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4f061a213185354518601f754e41494c
: end
ASA5510#
So i configured again, but i'm not to access to 5900 port

Open ports for all in LAN

Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from menu Applications & Gaming->Single Port Forwarding, but I must set port for each user IP address.
Can somebody tell me how to open port for all in LAN without to config for each computer?
Thanks in advance.

Hi gv. I read more about UPnP and the WRT160n User Guide. In section Administration>managment int wrote that UPnP is Enabled by default in my router it is corect. I Setup mu PeerToPeer(eMule) TCP/UDP ports to 20202 and check option "Use UPnP to setup ports". I test and close this port on my router configuration for my computer on "Single Port Forwarding", but in eMule the port is still block. Can you explain why it did not work. For UPnP it says that if Enable it allow users with Windows ME and XP automatically to gonfigure Router ports
Thanks in advance!
Best Regards.

Open ports on new airport extreme to play online games

hey, i have the new airport extreme and i wanna play online games.
how do i open ports with the utily that came on disk.
i have no clue how to configure it.
i tried in bridge mode, but than the airport starts flashing amber and other users in house wanna surf on the net aswel.
kind regards

Airport Utility -> Manual setup (Cmd+L)
Internet -> NAT
Enable a default host
Then in Internet -> DHCP
permanently assign the default host IP to the machine you're going to play the games on.
This is what other routers call the "DMZ" address. Be sure to run a firewall on that machine!

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Firewall in 10.5, how to open ports and how to manage?

I am pulling my hair out with the new firewall in 10.5. In 10.4 I could just set ports as I liked in the control panel, in 10.5 there is no such thing.
I need to for example open port 49999 to allow PageSender to function in my network.
I need to open port 5901 to work with JollyFast VNC, as port 5900 is used by Apple Remote Desktop and the conflict if they both use the same port.
Some of these ports I need permanent open like 59999 and others for one session and than close again, like 5901. Again in 10.4 I made the rule in the pref pane, ticked the box and Bob was your uncle. Now?
I would like to be able to see what ports are open and active on the machine. I have no idea as to where I could see this.
And at the same time I would like to keep the firewall as closed as possible as I am often on line in hotels etc.
So I need help, is there a manual somewhere someone is aware of? Or do you have any answers?

The new Application Firewall does not work in the same way as IPFW (the main firewall in 10.4).
Instead of managing ports, it simply controls the access of applications to any port. Thus, if you want PageSender to receive connections, you simply need to switch the firewall to "Set access for specific services and applications", and then add PageSender to the list, with "Allow incoming connections". When you do this, PageSender will be able to receive connections on any port that it needs to.
If you don't like this method of controlling connections, you can still use IPFW. Apple has removed the GUI, but you can download a GUI application like [NoobProof|http://www.hanynet.com/noobproof> or [WaterRoof|http://www.hanynet.com/waterroof/index.html], and you can then set access for specific ports.
There are no problems with using both IPFW and Application Firewall.
Cheers,
Rodney

How can I open ports on my AirPort Extreme, from WINDOWS?

I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
Logging and Statistics
MobileMe
IPv6
How can I open ports on my Airport Extreme router from Windows?

Is your AirPort Extreme the only router in your network configuration?

How do I open ports on my airport extreme and assign a fixed IP Address for a device connected to my network?

I recently had a security system installed in my house. One of the features is an EPAD which enables me to have a virtual keypad on my iphone, and computer to operate the alarm system. The technician was not familiar with Mac's and Airports. How do I open port 80 to 80 in my airport and assign a fixed IP address for the EPAD? Apparently this is what is needed to make this work.

There are three ranges of "strictly local" IP addresses reserved for local Network use:
192.168.xxx.yyy
172.16.xxx.yyy
10.xxx.yyy.zzz
What your Router does for you is to act as your agent on the Internet.Your requests are packaged up and forwarded on your behalf, and only when a response is expected is the response returned to your local IP address.
Directing Network Traffic to a Specific Computer on Your
Network (Port Mapping)
AirPort Extreme uses Network Address Translation (NAT) to share a single IP address with the computers that join the AirPort Extreme network. To provide Internet access to several computers with one IP address, NAT assigns private IP addresses to each computer on the AirPort Extreme network, and then matches these addresses with port numbers. The wireless device creates a port-to-private IP address table entry when a computer on your AirPort (private) network sends a request for information to the Internet.
If you’re using a web, AppleShare, or FTP server on your AirPort Extreme network, other computers initiate communication with your server. Because the Apple wireless device has no table entries for these requests, it has no way of directing the information to the appropriate computer on your AirPort network.
To ensure that requests are properly routed to your web, AppleShare, or FTP server, you need to establish a permanent IP address for your server and provide inbound port mapping information to your Apple wireless device.
To set up inbound port mapping:
1) Open AirPort Utility, select your wireless device, and then choose Base Station > Manual Setup, or double-click the device icon to open its configuration in a separate window. Enter the password if necessary.
2) Click the Advanced button, and then click Port Mapping.
3) Click the Add button and choose a service, such as Personal File Sharing, from the Service pop-up menu.

I have a dvr and I want to monitor from my phone. this worked when I had a Belkin router that let me open ports. I use "canyouseeme" and it can't see 80, 9000 or 1025. How do I make them available?

I have a Lorex DVR that I want to monitor from my IPhone and IPad. I used to be able to do this when I had a Belkin router (easy to open ports) but I bought the AirPort Extreme router and no longer have that capability. When I use "canyouseeme" they can NOT see 80, 9000 or 1025. Lorex says I need them all available in order to access. Help! And all the help I see refers to a earlier version of the AirPort Utility so I cant use those to look at anything, I cant find the same screens, I have version 6.1 (610.31). I also don't really understand how ports work, so I need a pretty basic explanation.

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

Hi the_mad_movies,
It seems like this article will be the best option for addressing this issue:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

How to know Active or open ports on a system

How to know he open ports on a system.
N e idea.
regards,
Rajesh Vincent.

Using the Java Communications API you can use the static method CommPortIdentifier.getPortIdentifiers to enumerate the available ports on the system, like:
Enumeration ports = CommPortIdentifier.getPortIdentifiers();
while (ports.hasMoreElements()) {
CommPortIdentifier port = (CommPortIdentifier) ports.nextElement();
switch (port.getPortType()) {
    case CommPortIdentifier.PORT_PARALLEL:
      // it's a parallel port (called port.getName())
      break;
    case CommPortIdentifier.PORT_SERIAL:
      // it's a serial port (called port.getName())
      break;
    default:
      // WTF?
      break;
}To know whether you can open the port I think you can use the isCurrentlyOwned() method. To open the port use the open(java.lang.String appname, int timeout) method (you'll get a PortInUseException if the port is already in use)

How do I open ports in Norton Security by Comcast?

How do I open ports in Norton Security by Comcast?

You should ask them or find a forum relating to Norton Security. There's a chance someone here may know but this forum is for Apple TV so you may not get the help you need.

Open Port on RV110W

Similar Messages

Maybe you are looking for