Open port(s) for StreamToMe?

I recently installed ServeToMe on my a and it says it's running fine. I then installed the StreamToMe companion app on my iPAd but it doesn't find the ServeToMe server, even if I manually enter the IP and port.
The ServeToMe instructions say that "ServeToMe uses port TCP 9969 for incoming traffic," and "Bonjour uses UDP port 5353 for incoming traffic. Both of these ports must be open for connections through any firewall on your Mac/PC and routers between your device and computer."
I turned off the firewall on the mac, as a test, and it still doesn't work. As a result, I'm thinking I need to make some changes to my APE but I'm not sure.
Any guidance would be appreciated.
Thanks!

Does anybody know what the port numbers of the
Airport Express Base Station, so I can use it in
conjunction with a Belkin wireless
router.
You are confused. There is no such thing as a "port #" for a base station.

Similar Messages

The access to our new chess hall may be blocked by your local firewall. You would need to reconfigure your firewall to open port 15010 for TCP traffic.

How do I do the following so I can get into my chess program??
The access to our new chess hall may be blocked by your
local firewall. You would need to reconfigure your firewall to open port 15010
for TCP traffic.

This is not really Firefox related.
What you need to do here is to read the firewall manual which usually explains how to create a rule for what you want to do.
If you're using the Windows XP firewall, see this Microsoft article: http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions

Help Opening PORT 6112 for WarCraftIII Hosting

I'm trying to help my son use WarCraftIII to host a game in our iMac G5, but no one can join. Successful hosting is supposed to be an issue of opening port 6112 but no success yet.
What I have done so far:
1) Set Linksys BEFSR41 router to forward port 6112 both ways. Contacted blizzard tech support today and they told me I needed to open the port in Linksys router by following instructions at http//:www.portforward.com for my router, and the WarCraft III game (fyi this is a very nice site, anyone with router setting issues should check it out). I went to the site, clicked on "Forward", found my router (Linksys BEFSR41v1.39)in the list below, then found my game WarCraft III in game list and followed instructions at this website: http://www.portforward.com/english/routers/portforwarding/Linksys/BEFSR41v1.40.2/WarcraftIII.htm
2) Opened port 6112 in Mac OS FileSharing FireWall. I'm not so sure I got this part right. I went to System Prefs, File Sharing, FireWall and clicked New. Then I entered 6112 in both TCP and UDP (cause I don't know which it is) and selected Other and gave it the name WarcraftIII1 (used this name, because we were helping a friend set up his router (Linksys WRT54G) to pass 6112, and the portforward.com instructions had us enter that text in Application field for the port forwarding range: http://www.portforward.com/english/routers/portforwarding/Linksys/WRT54G/WarcraftIII.htm So, I figured this was as good a name as any to use in FireWall setting.
Ideas I have not tried yet:
1) Maybe I need to update my Linksys firmware? I noticed that the Portforward instructions were for Linksys firmware 1.40.2 My firmware is 1.39 (going to Linksys site I see there's a newer version v1.46.02 available). So, maybe I need to download and apply (but I don't want to screw up my current router settings - since the work! - and I'm figuring it's likely to lose all current settings with a firmware update).
2) Maybe I need a different name in the FireWall port than "WarcraftIII1"? Maybe one of the pull-down options are what I should have used.
Any help would be greatly appreciated!
iMac G5 Mac OS X (10.4.6) 1.5 Gb RAM

Hey Tim,
Thanks for tip on preparing for firmware update. As it turns out, all settings were wiped when I did the update. But I like the approach of having 'clean' setup before update (sort of like running Disk Utility before and after new sofware installs).
I tried turning off the Mac OS firewall, but it didn't help (so I don't think that's the root cause - but a good thing to test). Part of the www.portforward.com instructions for using my Linksys router with WarCraftIII include setting to DISABLE the "Block WAN Request" option. I don't know much about router security, but this makes me feel more vulnerable. So, I prefer to keep Mac OS firewall enabled, as long as it doesn't get in the way (also MacWorld's most recent issue recommended firewall ON, and activate Advanced settings turning ON options for Block UDP Traffic, and Enable Stealth Mode). Having my firewall set up in this way hasn't been any problem for me at all for past 1.5 yrs, until just recently when I tried hosting WarCraftIII Custom Game (reason I want to do that, is it allows my son to play online against only friends we know - call me overprotective, and I'll happily plead guilty). As a case in point, I was on the Battle.Net USEast Open Tech Support chat channel last night (you get to this from within the WarCraftIII application), asking if someone would do a quick test and join my Custom Game. During that brief interchange, one of the other people on the channel types in all caps "I want to f**k your mother" (without the *'s)". I'm thinking, yeah Custom Game is the way to go, I'd don't want my son out here with the likes of you. Thankfully, someone else agreed to the test. Unfortunately it failed.
I think I've about got it beat though. I found on the blizzard.com support site, a way to use Terminal to run a traceroute by typing (without the quotes) "traceroute us.logon.worldofwarcraft.com > ~/Desktop/tracert.txt" and press the Return key. Previously I was getting all *'s back in the results (which means no recognized connections). Now, I'm getting IP addresses and ms timing for hops so it appears I'm getting through. http://www.blizzard.com/support/wow/?id=aww0827p5
But, I've got to go and won't be able to test ability to join a Custom Game with my son's friend until later tonight.
Thanks again. C

SRP527W - How to open port 491 for Go-Global apps

Hi Guys,
Recently bought a Go-Global to a remote which require to open port tcp 491. I'm using SRP527W, how configure using this devices, I tried using the port forwarding but failed. Need anyone can help thanks.

I have the same request, and have tried the steps written in the post online, but the screen options are not what was explained.
Per the instructions with my IP Camera support, here's what I need to do:
======
First thing you will need to do is make sure that in the network settings of your camera that you have entered the correct gateway and DNS information. The default gateway address is going to be the LAN IP address of your router. The primary DNS address is also going to be the LAN ip address of your router. For the secondary DNS address enter the address 4.2.2.2, save these settings in your camera.
The second thing you will need to do is, you will need to log into your router and forward the port your camera is using (the default port is port 80) to the LAN IP address of your camera. This will be done in the port forwarding section of your router. You may need to contact the manufacturer of your router to have them walk you through these steps.
In order to access your camera, you will need to use the WAN (public) IP address that was provided to you by your ISP. As an example, the URL will look like this, HTTP://65.44.139.2 or if you are using a different port number other than 80, you will have to use the URL with the port number. That URL would look exactly like this, HTTP://65.44.139.2:81
======
I've changed the secondary DNS to 4.2.2.2, but I cannot find how to forward the camers's port to the IP address of the camera....I've set 198.268.1.240 as the camera address.
Can you help?
Thanks,
Kent Tunell

Open port 21 for ftp in mac osx server 10.6

Hello
I want to open port 21. The firewall in the mac server is already off.The ftp server is enabled in this mac server. The NAT in the router is set accordingly to the internal IP of this MAC computer (OS X Server 10.6). However, whenever I try http://www.t1shopper.com/tools/port-scan/ to check whether the port 21 is open or not, it still says that the port is closed.
Any idea?
Thanks a lot

well if your trying to connect to the host, without an active network port you could try connecting with localhost or 107.0.0.1. You could also try deleting the ethernet interface and re-adding it. And or hard coding the ethernet interface to static ip.

Open ports needed for remote hd login

what ports should i have open to remotely connect to my AEBS external hard drive??

The following worked for me to access my airdisk via inet
1: Set the AE to bridging modus
2: If you have a firewall active, you have to forward port TCP 548 (afp) to the internal IP address of your AE. You can see the IP in the main screen of the airport utility program. It has the format 192.168.1.xx or 10.1.1.xx.
3: Figure out your external ip address -There's widgets that do that, e.g. iStat Nano-
You can access the airdisk as follows:
Open finder
Press command-k or select 'Connect to server' from the 'Go' menu.
Type afp://external ip/name of your airdisk
example: afp://86.354.32.45/MyDisk
And click connect.
Note: You must be connected to the inet from another location than yours, otherwise it won't connect.
That's it
Marc

Opening Port 5500 For OEM

Hi,
I can access OEM locally using http://oraclebox:5500/em (that is, when I'm on the machine "oraclebox"). However, when I try using the same URL on another machine in my lAN, I get a "Connection refused" error from remote machine's browser. I can SSH and ping into the oracle box from other nodes in my LAN, but I can't seem to access OEM through port 5500. Furthermore, this isn't a firewall issue, because I've disabled the firewall and still can't get OEM to show up remotely.
I'm using Fedora Core 2 and Oracle 10g.
A "netstat -l" shows that port 5500 is in fact being LISTEN'ed to.
Thanks.

Hi Luigi,
Try the following it worked for me.
Go to Security Level
Add 5500:tcp in the Other ports section.
That should do it.
VC

Opening port 1802 for a software

Hello i'm playing Dungeons and Dragons through a virtual tabletop software.
I need to have the 1802 port open to invite players to log at my virtual table.
What's the way to do that under the latest Sky Hub interface (http://192.168.0.1/)
I knew how to do it when i was living in France because i could set Nat/Pat rules.
I'm completely lost with the Sky Hub interface.
Can anyone give me a hand? ThanksGolgorosh

For this add a service first by selecting security then services tab, followed by the add button. Name the service, type should be TCP/UDP and start port 1802, finish port 1802. Select this link http://192.168.0.1 again and then select the security tab. Select firewall rules. Select add under inbound services. Service should be set to the previously named above service from the drop down list, Action should be allow always. Send to LAN server should be set to the IP address of the server/laptop, which on Windows can be found with ipconfig/all at the command prompt. Leave all other options at there default. If this doesn't work, factory reset the Sky Hub and follow the procedure above again, if it still doesn't work ensure firewalls on the server/laptop aren't blocking the traffic. And don't forget to Apply the settings, after the above steps.

Open port on e4200

A external scan has reviled that I have an open port. For security reasons I want to close it. How do I go about this. I do know the port number.
Solved!
Go to Solution.

The port 2420, did you forwarded that on your router? To double-check, you may access the setup page of the router (for instructions on how to access the router page, you may refer to this link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=3d655af76e21457fa8b71a0c3a2a0c9c_3676.xml&pid=80&r...). Once on the setup page, click on Applications & Gaming tab then check the subtabs under it (see screenshot below):
Check then the subtabs: Single Port Forwarding, Port Range Triggering and Port Range Forwarding if 2420 port is forwarded/triggered. Make sure as well that DMZ is disabled.

Open port on TMG 2010

dears
I need to open port 1521 for oracle listener on my TMG 2010 , and have no idea about this .
can anyone help me please?..
thanks in advance

Hi,
In general,
access rules are used for controlling outbound access. You can create a custom protocol to define the port 1521. As there is only a single port, please enter the same
port number in the From and To boxes in
New/Edit Protocol Connection dialog box. Then you can create an access rule and choose that protocol.
More information:
Creating an access rule
TMG back to Basics - Part 3: Protocol Definitions (
Note: Microsoft is providing this information as a convenience
to you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
Best regards,
Susie

How to open port 8000 (outward)

Can someone please explain how to open port 8000 for streaming Nicecast to my (network) IceCast2 server? Thanks!

If all you are using is the inbuilt firewall then it shouldn't be blocking outward connections.

Open ports for all in LAN

Hi, a few days ago I bought a wireless router WRT160n. I want to ask how to open some port for all in LAN(3 clients). For example all in LAN have PeerToPeer application for torrents. I want to open port for example 20202 for all. Now I open port from menu Applications & Gaming->Single Port Forwarding, but I must set port for each user IP address.
Can somebody tell me how to open port for all in LAN without to config for each computer?
Thanks in advance.

Hi gv. I read more about UPnP and the WRT160n User Guide. In section Administration>managment int wrote that UPnP is Enabled by default in my router it is corect. I Setup mu PeerToPeer(eMule) TCP/UDP ports to 20202 and check option "Use UPnP to setup ports". I test and close this port on my router configuration for my computer on "Single Port Forwarding", but in eMule the port is still block. Can you explain why it did not work. For UPnP it says that if Enable it allow users with Windows ME and XP automatically to gonfigure Router ports
Thanks in advance!
Best Regards.

How do I open ports on my airport extreme and assign a fixed IP Address for a device connected to my network?

I recently had a security system installed in my house. One of the features is an EPAD which enables me to have a virtual keypad on my iphone, and computer to operate the alarm system. The technician was not familiar with Mac's and Airports. How do I open port 80 to 80 in my airport and assign a fixed IP address for the EPAD? Apparently this is what is needed to make this work.

There are three ranges of "strictly local" IP addresses reserved for local Network use:
192.168.xxx.yyy
172.16.xxx.yyy
10.xxx.yyy.zzz
What your Router does for you is to act as your agent on the Internet.Your requests are packaged up and forwarded on your behalf, and only when a response is expected is the response returned to your local IP address.
Directing Network Traffic to a Specific Computer on Your
Network (Port Mapping)
AirPort Extreme uses Network Address Translation (NAT) to share a single IP address with the computers that join the AirPort Extreme network. To provide Internet access to several computers with one IP address, NAT assigns private IP addresses to each computer on the AirPort Extreme network, and then matches these addresses with port numbers. The wireless device creates a port-to-private IP address table entry when a computer on your AirPort (private) network sends a request for information to the Internet.
If you’re using a web, AppleShare, or FTP server on your AirPort Extreme network, other computers initiate communication with your server. Because the Apple wireless device has no table entries for these requests, it has no way of directing the information to the appropriate computer on your AirPort network.
To ensure that requests are properly routed to your web, AppleShare, or FTP server, you need to establish a permanent IP address for your server and provide inbound port mapping information to your Apple wireless device.
To set up inbound port mapping:
1) Open AirPort Utility, select your wireless device, and then choose Base Station > Manual Setup, or double-click the device icon to open its configuration in a separate window. Enter the password if necessary.
2) Click the Advanced button, and then click Port Mapping.
3) Click the Add button and choose a service, such as Personal File Sharing, from the Service pop-up menu.

What ports need to be open on Fw for Waas Communication--Urgent

Hi All,
This product is new to need your help in configuring this. I am explaining the architecture below:-
We have a requirement to use WAVE-594-K9 Software Release 5.3.1 and in our Manila location and it will not talk to Waas central Manager in our client location instead client has installed one same model Wave-594 in PHX.
So now client has said it will only be used for caching contents and not for optimizing, they have some video training on web which will be passed through this wave and for making them highly/fastly available to agents they want to use this.
We have installed one Wave in Manila in application-accelerator mode and using PBR to redirect the desired traffic via Wave. As per our client Manila Wave will talk to PHX wave and PHX wave will get registered to Waas Manager in client network.
We have firewall between PHX wave & Manila wave, please let me know do we need to opened tcp/udp ports on FW for opening the communication between these two waves?
and what else i need to configure on Manila wave?
This is very urgent quick reply will be highly appreciated!!
Thanks!!
Bhisham

Thanks for the quick reply Kanwal!!
I checked with my team in PHX and we have Juniper FW in between these two Wave's, so what i understand from the links which you have shared.
In Manila Wave i need to configure that in Directed Mode and udp port 4050 needs to be opened bi-directionally on Juniper FW between IPs configured on wave devices.
In Manila we have 10.111.x.189 (Virtual-Blade IP) & 10.111.x.190 IPs & in PHX we 63.149.23.x & 63.149.23.x (VB) so from both IPs we required to open udp 4050 bi-directionally? Want to be sure before raising any request :-)
In PHX wave i am not sure whether we can configure that in directed mode and if it’s not then also it will work by opening port 4050 on FW Right?
In last our client was saying that Manila Wave will only be used as cache engine (VB is configured as content-engine) and it will download contents from PHX Wave (which is registered to CM at client side), what does it mean and do i need to do any special config on wave to achieve this?
I am very new to this device and lot of research on net confused me a lot, please don’t mind!!
Will wait for your reply then only i will raise request with FWteam.
Thanks,
Bhisham

BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above, please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Open port(s) for StreamToMe?

Similar Messages

Maybe you are looking for