Open qty errin Selection list For Ref Doc. screen while converting to order
Hi SAP Gurus,
For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
Can you please help me?
Thanks,
Ketan
Hi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards,
Similar Messages
-
Selection problem of Ref op set while converting plnd to prod order
Hi PP Professionals,
Even though we have maintained 'manual slection (4)' for Tast list type- S (ref operation set), we are getting error 'Ref Op set is not valid' and in error help 'error in reading PP master data'.
Since the Routing is same for all the finished products, we want to assign Ref Op Set directly while creating production order.
We have already maintained parameters in 'order-type dependant parameters' and in 'task list selections's default and automatic selection'
Regards,Hi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards, -
BOM not exploding for CR doc. type while creating sales order.
Hi Experts,
I have a problem in BOM. When created the BOM with sales doc. type OR, then BOM exploding as usual and picking pricing for main item.. But when I tried for sales doc. type CR, then the BOM is not being exploding and also pricing is also not picking. Can any one help me for this problem.
Thanks in advance,
Raksha.Hi,
Go to VTAF billing to sales document copy control and check below settings:
Header:
Data Transfer -052 Billing doc header
Data Transfer Buis - 103 Billing bus header data
Data Transfer Part - Billing Header Partner
Copying requirements - 021 Billing Header
Check Copy item number
Uncheck complete reference
Item:
Item Cat proposal G2N Request
Item TAN - Standard item
Data Transfer -153 item from Billing doc
Data Transfer Buis - 104 Billing bus Item data
Data Transfer Part - 004 Billing Item Partner
bl.pl - Leave it blank
Copying requirements - 303 Billing Header
uncheck copy schedule lines and do not copy batch
check update document flow
Pricing type - D
Leave blank - Campaign Deter.
Points to add: If you create without reference to an invoice then it would not explode BOM in RE return order because the configuration not set in REN item category.
As a standard business process return orders always create with reference to invoice.
regards
rc gopi -
"Key and Text" values in variable selection list for a field
Hi,
we have created the variable for the one of the navigation attributes of the "0customer" field .
for the customer field in BEX settings we are having "Text" as display.
for the navigation field in BEX settings we are having "Key" as display.
while running the reports in the variable selection list for some reports we having both KEY and text for selection and for others only text are displayed,
we have checked the BEX settings in field and query level there are same.
Please help us here.Check the setting again in the Query level and then maku sure you save it. Come out of the query and then re-open the query and execute, you can see the chages in the output.
-
Is it possible to change values in pagination select list for a report?
The values showing up in my pagination select list for a report are 10,15,20,30,50,100,200,500,1000,5000.
Is it possible to not have this list show the 1000 and 5000 values? I've tried setting various row values in the layout and pagination section of the report, but nothing changes in the select list. Is there a way to change this, or is it set up in a template somewhere that I can change?
APEX version 3.0
ThanksFigured this one out. Using the P1_ROWS item, added a static LOV with the correct values to override the one APEX was providing. The P1_ROWS item goes in the Number of Rows (Item) field in the layout and pagination section of the report.
-
Limit selection list for variables
Hello Experts.
Is there a way to limit the selection list for variables? For example, there are many possible currency values for 0CURRENCY, but I want allow the user to choose only one of these choices USD, EUR, or HKD. I would rather not do a validation check subsequent to the users making their selection.
I must use 0CURRENCY rather than copying it to another characteristic and entering only those three keys in master data.
Any ideas?
Kind regards,
Aron
Edited by: Aron Weaver on Oct 1, 2010 1:08 AMIf you are using the standard info object which is referring to '0CURRENCY' then it mayn't be possible to restrict the 'F4' list to few currencies in the standard BEx environment. There are couple of options to limit the 'F4' selections using the web template /BSP technology.
-
Add button in "Due List for Purchasing Documents" Screen
Dear All,
I need to add one button on "Due List for Purchasing Documents" Screen in customer view. Can you please suggest BADI for adding this button.
ThanksButton to be added on toolbar.
-
Asking for purchasing reqistioner no. while making production order
dear all
asking for purchasing reqistioner no. while making production order.how do get rid of this reqisitioner no. option from production order.
regards
manish sharmaHi,
Chcek the BOM copied to the order or the items that you are entering while creating the order, if item categories are N, purchse requisitions are automatically created and related info is queried from the user. Change item categories to L, stock items if external procurement is not relevant. -
Multiple select list for one field in form
Friends,
I have a form , which is having many fields. One of the field are day/date. In this field i have to take 3 dropdown lists. like one for date, one for day and another for year. I have created three lov's for the day,date and year but for the field day/date i am able to apply only one lov. Any way so that i can display all the three lov for one field
example
day/date: day -- (dropdown list)
date -- (dropdown list)
year -- (dropdown list)
thanks in advance
adi
Edited by: Adi's on Feb 16, 2010 11:46 PM
Edited by: Adi's on Feb 16, 2010 11:47 PM
Edited by: Adi's on Feb 16, 2010 11:52 PMnope, I just gave u an example to combime day , date and year fields in one select list, it does not matter whether they are in one table or multiple table and you dont require to create any tables for this, I assumed your lov for day / date / year are dynamic not static.
Regards,
Shijesh -
RPM Upload/Download Project Data u2013 No Selection list for Application system
When trying to upload from project or download to project from/to application SAP Project System there is no selection list under the drop down field for Application system. As I understand from the RPM guides, this is the logical system. We have defined the logical systems in IMG. Is there some other configuration we are missing?
We are using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
Any help appreciatedHi,
Have you deleted cache and tried it again.
Pramod -
Onchange events when transforming select lists for EXTJS integration
Hi,
We have the folloiwng code that transforms select lists to extjs combo boxes
var selectfield = Ext.query('select[class!="shuttle"][class!="multiselect"]');
for (var r = 0; r < selectfield.length; r++) {
//If there is an onchange event then don't convert as onchange is lost
//This is used for cascading LOVs so we need to find a way of getting this to work
if((selectfield[r].onchange == '' || selectfield[r].onchange == null) && ((r>0 && selectfield[r-1].onchange == null) || r==0) && selectfield[r].id != 'apexir_NUM_ROWS') {
var newselect = new Ext.form.ComboBox({
//hiddenId: selectfield[r].id,
//hiddenName: selectfield[r].id,
id: selectfield[r].id,
typeAhead: true,
triggerAction: 'all',
transform: selectfield[r].id,
width: selectfield[r].clientWidth+5,
emptyText:'Please select...',
forceSelection: true,
maxHeight: 200,
disabled: selectfield[r].disabled
}The code does not convert select boxes that have onchange events as the code above seems to suggest they get lost when transforming. Does anyone know if that is the case, and if not how I amend the code to include the onchange events from the original select lists.
Regards
PaulHi Vee,
Thanks for pointing it out -- here at work the only version of IE I have is 6 and I assumed (as usually is the case) it was because of a bug in that specific version. However, I have the all-powerful, (allegedly) standards-compliant IE 9 at home and it behaved exactly the same way!
So you cannot say this is due to an old, non-supported browser. Surely it fits in the bug category then? After all events should not be triggered at random...
Thanks also for the suggestion to fix it. I didn't try it because, in the end, I found out that if I use onchange instead of onblur (in the text field) the problem doesn't occur! onblur would be better, but onchange works fine for what I need.
Thanks
Luis -
Selection List for Costing Run
Hi guys
I vaguely remember that there is a place where I can create a selection list on only the materials that I want to cost in CK40n, but I cant seem to find it any more.
I tried the CKMATSEL - Create transaction, but when I go to execute the Selection in CK40n, I dont see what I created in CKMATSEL...
Is there any other way or am I doing something wrong in the CKMATSEL screen?
Thank you
RukshanaHi Rukshana,
Pls go through the following which may be of help...
1. If you want to exclude the Materials from a single Costing Run...
If you want to exclude some Materials from Costing Run, when you select the Materials to be costed in the "Selection Parameters" of Costing Run, press the Arrow button for additional selections, click on "Exclude Single Values" and mention the Materials which you want to exclude from the Costing Run.
In the selection, you can select all the Plants (Plant 1 to Plant 4). By this, system will exclude those materials which you mentioned from all Plants when you run the Cost Estimate.
2. If you want to exclude the Materials from being costed on permanent basis...
Go to MM17 (materials mass maintenance), select the "Fields" tab, "Find" - "NCOST", select that row, press "Execute". Now, select/give all the Materials which you want to exclude from being costed, mention the Plants and "Execute". You will see the list of Materials which you have mentioned and on the right hand side, you will see the column with "NCOST" field. Mark "X" for all materials there.
This NCOST field is nothing but "Do Not Cost" check box in "Costing1" of Material Master. By this, system will understand that, whenever Cost Run is done, all these materials should be excluded from being costed.
Srikanth Munnaluri -
Update primary key with a tabular form based on a select list for each row
Hello!
I've two tables: Table1 with only one column (primary key) is a foreign key for table2.column1 (primary key). There is also a second primary key column in table2.
Now I want to change the primary key values in table2.column1 with a tabular form (MRU) based on a select list (LOV based on table1.column1) for each row.
The user should be able to choose for every row a new value from the select list to change the old primary key value at this position.
How can I do this with ApEx?
I've the tabular form and so on, but at the moment I get the following error:
"Error in mru internal routine: ORA-20001: Fehler in MRU: row= 1, ORA-20001: ORA-20001: Die aktuelle Version der Daten in der Datenbank wurde geändert, seit der Benutzer einen Update-Prozess eingeleitet hat. ..."
Thank you for your support!
KayHello!
I've two tables: Table1 with only one column (primary key) is a foreign key for table2.column1 (primary key). There is also a second primary key column in table2.
Now I want to change the primary key values in table2.column1 with a tabular form (MRU) based on a select list (LOV based on table1.column1) for each row.
The user should be able to choose for every row a new value from the select list to change the old primary key value at this position.
How can I do this with ApEx?
I've the tabular form and so on, but at the moment I get the following error:
"Error in mru internal routine: ORA-20001: Fehler in MRU: row= 1, ORA-20001: ORA-20001: Die aktuelle Version der Daten in der Datenbank wurde geändert, seit der Benutzer einen Update-Prozess eingeleitet hat. ..."
Thank you for your support!
Kay -
"Procurement Wizard" window opens for a particular warehouse while saving Sales Order
Hello All,
We have upgraded SAP B1 8.8 to SAP B1 9.0
My client is facing one of problem while saving Sales order using particular warehouse.
Actually client is having 4 warehouses (A,B,C,D) in which if they use one particular warehouse "A" for saving Sales order they are facing a issue. The scenario is here below:
1. Client selects all required details of sales order with along with particular warehouse "A".
2. On saving SO "Procurement Wizard" is automatically triggered even if procurement document field is unchecked in logistic tab of SO.
3. This is happening only for a particular warehouse "A". Whereas if I select other 3 warehouses (B,C,D) the system saves SO without trigerring "Procurement Wizard".
Client is using SAP B1 9.0 PL 08
We don't want this "Procurement Wizard" window to open for this. As we haven't selected any check box for "Procurement Wizard" so it should not open for a particular warehouse "A".
Do you think any issue with my warehouse or system settings? Please let me know.
Please refer screen shots.
Thanks in advance.Hi Saurabh,
As per your Screen Shot, I think you have Add-on.
Please stop that Add-on and then check above Scenario.
Thanks
Regards::::
Atul Chakraborty -
Select list in report region.Everything is not in order...
I want to have a select item in a report region. The selected item in de select list is the "master" for the records in the region. It was working fine but after dropping another region on the same page the select list is now shown beneath the report instead of on top of the report. I can't find a way to get it back on top.
As a matter of fact I can't find any attribute that determines what comes first in this situation. Is it bad practise to use a item in a report region?Thanks, that's it.
Because I wanted this region to be above two other regions I moved it to page template 2. I did not notice the "items below/items above region content". I guess I need to create a page template region 2 items above content.
Maybe you are looking for
-
How to use driver emulation in opengl profile
I'm trying to use the OpenGL Profiler to resolve a bug happened on the Mac of a client. I read in the OpenGL Profiler User Guide, we can the driver emulation to emulate an Grpahics Card Driver not existing on local machine, just by select the wanted
-
Error in importing technology in topology by local agent
Hi , I am trying to import technology using following command Startcmd OdiImportObject -WORK_REP_NAME=<<Work repo name>> -IMPORT_MODE=SYNONYM_INSERT -FILE_NAME=<<TECH_Informix.xml>> Note: localAgent is in running mode. But i am getting error like : [
-
I am having problems using my ipod 7g with Nike Fitness. When running when I press the button between the volume buttons, I get a different action almost every time. And usually I end up either turrning volume up very high or ending the workout. I n
-
How do I make people see my number, not my Apple ID?
Hello everyone. I just got iOS7 and after drivers training tonight I texted my sister asking if she got is aswell. She responded asking who I was because instead of my number or my name like she had me, it displayed my Apple ID or icloud email instea
-
Blackberry app world icon disappeared
Hi anyone could help, I have tried to upgrade my Blackberry app world and the icon just disappeared and tried to open menu to show all hidden icon nothing help. I also tried to re-download the icon but nothing shows on the home screen, please help on