Open quantity remains open even when delivery and goods issue is completed

Hi gurus,
We have so many deliveries in system where open quantity in outbound delivery document shows the quantity as open even though the goods issue is completed and invoice has been created and accounting documents are also cleared.
I am not getting why it is happening. can someone please advise or throw some light on this.
Vice versa they are showing up in MRP run as requirements.
Thanks in advance gurus,
Kind regards,
Gopio.

Hi Amol,
I think i got the correct one which is RVV05IVB, and i had selected the shipping due date index, but it did not clear the open quantity, still it remained as open quantity.
And the message i got after running the report is pasted below.
Reorganization of SD Document Indices
Reorganization sales document indexes with the following selection criteria:
I EQ 80015593
Delivery due Index
How does that open quantity gets updated, or is there any control that we can deactivate as these are showing up in MD04 as sales requirements.
Thanks,
Regards,
Gopio.

Similar Messages

Schedule for del stock display even after delivery and goods receipt

Hi, Please suggest me for below scenario...
I have a scenario where we does STO and then delivery against outbound and performs goods receipt. in MMBE the stock is still displaying under schedule for delivery and also in MD04 even the stock is deducted from supplying plant and performed goods receipt at receiving plant..also stock is displaying at receiving plant..why the stock is still displaying in stock for del at sending plant..in general what happens when we does goods receipt against outbound delivery or when we does against STO?

ok sir ;
No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
-first with me21n i created global purchas order
-the sales will be picked from this purchas .
-delivery is assigned automatically to this purchas order with user exit.
-with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

Delivery and Goods Issue

Hi,
I am new to SAP and was trying to do a Goods Issue after creating a delivery. When i click on Goods Issue from the delivery document, I get the message
" Storage Location not defined for delivery item 000010"
When I try to go to picking overview and manually enter the storage location, it gives me a message,
" Error while determining ref. mov. type for WM via table 156S/601////L/X"
Could you please advice me for the same?
Thanks and Regards,
Aditya

Go to your material master and input the storage location there.
Maybe you have WM view active in MM. The location from where you are trying to delivery is a Warehouse managed location. you post some stock to storage location, which is not warehouse managed. Or do the stock transfer to this location. Then you will be able to do the PGI.
Thanks

Automatic Delivery Outbound Delivery and Goods Issue Creation

Hi All,
I was doing a goods reciept for a PO. And upon saving it, an outbound delivery should be created and will also goods issue the delivery. It will be done when an output type is triggered when the PO is change. Does anyone knows where the PO is updated when using the MIGO transaction. Or can anyone suggest on how can I make it possible to trigger the ouput type in the PO when I create the GR.
Note: The Output Type/Message Type is only triggered when the document type is NB and is only set on the PO.

You are talking two different process. How is your inbound PO GR linked to an outbound PGI? Is this is a buy-sell process?
Albert

Connection between Outbound delivery and goods issue

Hi,
Can Any1 tell me in which SAP-Table I can find the connection between the Outbound delivery - Position and the Position in the goods issue.
4 Ex I have a Outbound delivery with 10 Items and let's say I want to see which Item in which goods issue is connected to my initial Outbound delivery Item.
10x to u all

Hi,
if the requirement is to be able to connect different line items of the delivery to the corresponding PGI document then you can go to VBFA table > give the delivery document number > select the subsequent document cat as R- Goods movement.
It will show you item connection with the GI document.
regards
sadhu kishore

Cannot go to iTunes store using my iPhone 6 plus. I click on App Store and it opens up iTunes U. Even when I open iPhones video app and try to purchase a movie which is suppose to take me to iTunes store, it instead opens up iTunes U.

Cannot go to iTunes store using my iPhone 6 plus. I click on App Store and it opens up iTunes U. Even when I open iPhones video app and try to purchase a movie which is suppose to take me to iTunes store, it instead opens up iTunes U. Any feedback would be greatly appreciated. Thanks..

There isn't currently any music, films or TV programmes available in the South Korean store, so you will only see iTunes U in the iTunes store app. You can't use the US store unless you are in the US, you have to be in a country to use its store (that is in the Store's terms) - so whilst you are in South Korea you can only use the South Korean store.
Are there other music purchase download sites in South Korea that you could use ? You can also copy your CDs via your computer's iTunes

Timemachine only opens a finder window even when I'm in iPhoto or mail. I am trying to retrieve a deleted book project from iPhoto. Please help

Timemachine only opens a finder window even when I'm in iPhoto or mail. I am trying to retrieve a deleted book project from iPhoto. Please help

jon199 wrote:
Timemachine only opens a finder window even when I'm in iPhoto or mail. I am trying to retrieve a deleted book project from iPhoto. Please help
If you have iPhoto '09, you cannot browse or restore seleted items from your backups. See the pink box in #15 of Time Machine - Frequently Asked Questions.
Mail should work, however, per the blue box there.

With the automatic addition of an update on both home & work computers, attachments went from being identified & opened as appropriate files, even when identified as .doc or .pdf, etc., all become .ashx

With the automatic addition of an update on both home & work computers, attachments went from being identified & opened as appropriate files, even when identified as .doc or .pdf, etc., all become .ashx (see details below)

With the automatic addition of an update on both home & work computers, attachments went from being identified & opened as appropriate files, even when identified as .doc or .pdf, etc., all become .ashx (see details below)

I have two airport extremes, one acting as amodem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable. How do I know if they are operating wired or wirelessly

I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.

Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg.

How to set a foot in a scrolling page site, that it remains visible even when scrolling, using PC

how to set a foot in a scrolling page site, that it remains visible even when scrolling, using PC

Hello,
Please select the footer items and Pin them to the bottom like the screenshot below.
Regards
Vivek

Goods receipt Quanity and Goods Issue Quantity tables

Hi experts,
Can u plz let me know in which tables we can find the Goods receipt Quanity and Goods Issue Quantity
if not how to get the values of these, neccessary for open PO report
Thanks in advance.

Hello,
You can get the GR/ GI quantity for a PO from EKBE table.
GR
EKBE-EBELN = EKPO-EBELN
EKBE-EBELP = EKPO-EBELP
EKBE-VGABE = '1'
EKBE-BEWTP = 'E'
GI
EKBE-EBELN = EKPO-EBELN
EKBE-EBELP = EKPO-EBELP
EKBE-VGABE = '6'
EKBE-BEWTP = 'U'
The qty are present in EkBE-MENGE
BR,
Suhas
Edited by: Suhas Saha on Jan 29, 2009 4:52 PM

Delivery and Goods Receipt without goods value

Hi!
this is my first post in this forum, hi everybody
Now the question:
My goal: warehouse manager shouldn't see goods value (prices) of purchased material and final products (sold goods).
That means I would like to remove all value data (Unit Price, Discount%, Total etc.) from the documents Delivery and Goods Receipt. Is it possible? The values should be then added by accountancy (any kind of connection between warehouse documents and journal entry?).
Is it possible to split the value data from quantity data (SAP BO 2007A)?
Thank you for any suggestion!
Aleksandra

You may try form setting to hide all those columns for this user.
Thanks,
Gordon

Difference between inbound delivery and Goods Receipt

Can any one explain difference between inbound delivery and goods Receipt??

Hi dear,
Inbound delivery is one confirmation used to indicate the expected goods receipts in advance, so that the related process partners like warehouse personnel , planning personnel can utilise this data for initiation of actions and planning. Also , we can make this confirmation relevant to Planning in the customisation, to enhance the performance.
In general , we need confirmations only as a kind of assurance/information , in absence of the goods.
But if the goods are received physically , obviously we do not need any confirmations , we would perform the goods receipt .
When working with Inbound delivery , the goods receipt is done with respect to specific inbound delivery( though not compulsary to do so) , so that the integration done in the system works to the advantage of the users.

Change in PO Price after goods receipts and goods issue

Dear All,
Happy Holidays!! Wishing you a happy and fun-filled holiday season.
I would appreciate your input of the issue at hand. I support MM users in and Oil & Gas downstream company.
Issue
Purchase Orders are created using price estimates. The price of oil products fluctuates and we usually cannot get the exact price at the point of creation of the PO.
We use Moving Average Price (MAP) for stock valuation and so the price & quantity in the PO affects the moving average price.
We use price estimates to create the PO but when we receive the final price for the oil products from the Supplier, most times there is a significant difference between the estimated price and the final price. Usually, at this point, we have completed all goods receipts and goods issues against the PO and are unable to make changes.
We have an issue posting the invoice because the invoice value is significantly higher than the PO value. We also have an issue with the moving average price because it is understated as a result of this.
To reiterate, this is a summary of the issue:
At the point if PO creation ; Quantity = 10, 000 MT Price = $650
Later when final price is available; Quantity = 10, 000 MT Price = $715
Any advise on how to treat this issue, please? Your assistance will be truly appreciated.
Thanks

Hi All
For my client I have to map the similar requirement for material price which is subject to more than 15% fluctuation. The actual invoice price is having quite a huge difference.
Below are my limitations within which need to give a solution.
PO is subject to release strategy and Material is delivered over a longer duration of time. Hence there is problem to de-Release the PO everytime price is changed.
Since differnce is so huge, the same can not be settled during the MIRO.
Down Payments has to be posted hence PO has to be created with estimated base price.
Please suggest me suitable alternative options which will require no changes in PO and the price change also can be accomodated during the MIRO for Multiple goods receipts.

Tracking Material Delivery post Goods Issue

Hi Friends -
My client has a requirement to track the materials post goods issue to the user departments for consumption.
Typical scenario - the materials reservations are raised from the user departments. The reservations are processed by the warehouse team. Then materials are issued to the user departments against the reservations.
The user departments and warehouses are far apart from one another. The materials are transported and sent to the user departments periodically once a week or twice a week.
We want to track the different stages of the delivery post goods issue.
The different stages are
1. Post Goods Issue against the Reservation
2. Staging the materials
3. Packing the materials
4. Loading on the Transport Vehicle
5. Delivery (in transit)
6. Delivery Confirmation (post material delivery to user department)
Can you pls provide me details how we can map this on WM?
Thanks and warm regards
Purnendu

Hi Frenchy,
Thanks a lot for your reply.
We are at the Design phase and proposing SAP - MM - Inventory Management as a proposed solution.
The client uses part of the warehouse management functionality. We are exploring the feasibility of using SAP -WM Lean Warehouse management functionality.
Can you pls advise us whether Lean Warehouse Management will be able to provide the required functionality?
The requirement is to track the internal movement of materials from Warehouse to User department for consumption/use.
Typical Scenario -
1. Materials are issued against Reservations from Store -
Different stages such as Picking, Packing, Staging, delivery and delivery confirmation has to be tracked.
2. Direct Purchase of materials - Goods are received against acount assigned purchase Orders. The materials are received in store and kept in a staging area for delivery. The Materials are treated as consumed at goods receipt.
Now these materials will be transferred to the User departments. The different stages of delivery has to be tracked in system.
Ps provide input on the above. Let me know if you need any clarification.
I will really appreciate your prompt reply on the same.
Thanks and warm regards
Purnendu

Open quantity remains open even when delivery and goods issue is completed

Similar Messages

Maybe you are looking for