Open report link in the same page

Hi,
I have two reports in a dashboard page with a prompt. Now, I need to display one report in the compound layout and the other should appear as a link. When a user wants clicks on the link, the second report should also be displayed along with the first report with the prompt value.
I tried using Display result --> Link in the dashoard option. But then when I click on the link the first report is not displayed.
Any suggestions please.
Thanks in advance.
Ronnie.

they dont want to see the first report.
Is there a way in which the Prompts are also display along with the second report?Then create the same prompt on the second report also.
Cheers
Nawneet

Similar Messages

  • Image map (Open a link in the same place not a new Window)

    Image map (Open a link in the same place not a new Window)
    I'm using image map From KM a made a Image and I put the link like this "documents/images/image.jpg" okay, its works, but when I click on the link open other page, How to open on the same page ???????

    Hi Marcus,
    Try out this link. It may be helpful to you.
    Opening of IView in New Window
    Regards
    gEorgE

  • JEditorPane HTML link in the same page

    Hi,
    I want to show an HTML page in JEditorPane.
    The HTML page have <a> tags that link to a bookmark in
    the same page, but I can�t show this because I get an error
    like this:
    MalformedURL or similiar.
    I try to do somethig like this:
    public void hyperlinkUpdate(HyperlinkEvent ev)
    ...Editor.setPage(ev.getURL());
    or
    ...Editor.setPage(ev.getDescription());
    without results.
    How can I listen for hyperlinksEvents than link in the same page.
    Thanks

    they dont want to see the first report.
    Is there a way in which the Prompts are also display along with the second report?Then create the same prompt on the second report also.
    Cheers
    Nawneet

  • I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

    i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I can not open new tabe in the same page

    i can not open new tabe im the same page
    when i click on new tabe , it donsnt open at all

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Passing multiple parameters between two report portlets on the same page

    Hi,
    I want to pass multiple parameters between two report portlets on the same page.
    I have been succussful passing a single parameter between two portlets. The
    following are the steps :
    (1) Created first report based on the query
    SELECT htf.anchor('http://192.168.0.84:7778/servlet/page?&_pageid=97&_dad=portal30&_schema=portal30&_mode=3&dept_code='||DEPTNO,DEPTNO) Department, ename FROM EMP;
    (2) Created 2nd report
    select * from EMP where DEPTNO = :dept_code
    (3) Added pl/sql code before display page on the 2nd report
    portal30.wwv_name_value.replace_value(
    l_arg_names, l_arg_values,
    p_reference_path||'.dept_code',portal30.wwv_standard_util.string_to_table2(nvl(g
    et_value('dept_code'),10)));
    (4) Created a page and added these reports as portlets.
    Sofar it works fine for one parameter (deptno) . Now I want to add one more
    parameter say empno to my first report query and would like to pass both the
    parameters deptno and empno to the 2nd report. Please tell me how to pass multiple parameters ?
    Thanks
    Asim

    Hi,
    You will have to do the same thing
    The select will be like this
    SELECT htf.anchor('http://toolsweb.us.oracle.com:2000/servlet/page?_pageid=97&_dad=mb&_schema=mybugs&_mode=3&dept_code='||DEPTNO||'&empno='||empno,DEPTNO) Department,ename
    FROM EMP
    In the additional plsql code do the same for empno like this
    mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.dept_code',mybugs.wwv_standard_util.string_to_table2(nvl(get_value('dept_code'),10)));
    mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.empno',mybugs.wwv_standard_util.string_to_table2(get_value('empno')));
    Thanks,
    Sharmila

  • How to create links to the same page, how to create links to the same page

    How to create link to the same page with iweb?
    Thanks

    You're referring to anchors.  There are a couple of ways. These topics discuss them:
    iWeb FAQ - Anchors
    How do i hyperlink to certain portion...: Apple Support Communities
    OT

  • When going to a # link in the same page, Firefox 4 seems to jump to the wrong spot, and I have to scroll to find the actual anchor, usually one screen down.

    Visiting the Apple developer site, pages have a task list at the top of a very long page. When I click on a task which is linked to an anchor on the same page, the screen briefly flashes up the intended topic, then redraws content about a screen above what I wanted, so I have to scroll down to the topic I wanted to read.

    It happens when I open the topic in a new tab. There's a sidebar that's not drawn when the initial flashup happens. Then the sidebar draws and the content gets pushed down so the topic I wanted is now below the visible screen.
    When I jump to the anchor in the original tab, the sidebar is already there, and it goes to the right topic.

  • Mutliple report regions on the same page querying same tbl

    Hello,
    I have a normal multiple report regions in a page with some editable in those regions, these report regions are querying the same table. Now, Is it possible to have one submit button for all the report regions to update the underlying table data?
    Can anyone please help me out with this one.
    thanks,
    Orton

    Sure, here are some details:
    Oracle apex version: Product Build:4.2.3.00.07
    Tables :
    STUDENTS - rows : student_id(PK), student_name ...
    COURSES - rows: course_id(PK), course_name, course_credit
    STUDENT_COURSE - rows: student_id(FK), course_id(FK), student_course_id(PK)
    I have a page where I show student's details. On this page I have access to student's id. The name of the field (on the page) is P9_STUDENT_ID. On the same page I want to have a table which is linked to an sql query that lists a student's courses, their credits, names etc.
    My sql query is the following:
    SELECT courses.course_id, courses.course_name, courses.course_credit
    FROM student_course INNER JOIN courses
                        on courses.course_id = student_course.course_id
                        WHERE student_course.student_id = 1
    Currently it displays all courses of student with Id = 1. I just want to replace this '1' with the actual student_id for the student we are currently displaying information for. Or, in this case P9_STUDENT_ID field's value. Don't know if this is the right way to do this, but still reading for options

  • How to share the same QUERY among report, chart on the same page? and more

    Dear HTMLDB experts,
    I am absolute rookie to this tool, so I have some questions need you all's help.
    (1)
    When I build a page with a spread sheet and a chart on the same page, they all use the same query to get the data. However, I have to type in the SQL twice in spread sheet(report region) and chart's attribute sections. It seems so dumb, does it really run the same query twice, is there a way to share the same query?
    i.e. SELECT name, timestamp, value FROM foo WHERE name = :P1_NAME? (by the way, is :P1_NAME case sensitive?)
    (2)
    In the same chart, if I have two series from two columns of the same table, I have to write 2 queries, one
    select null, timestamp, value1 from same_table
    and
    select null, timestamp, value2 from same_table
    Is it possible to use one query: select timestamp, value1, value2 from same_table and define the series on two value columns of this single query? It's really no point to run two queris.
    (3)
    In a chart, when the query has ORDER by clause, it seems the chart is not showing up.
    So instead of using the query below
    SELECT null, to_char(ts,'mmdd') ts, value
    FROM same_table
    WHERE ts >= TRUNC(SYSDATE) - :P2_DAYSAGO - 1
    AND name = :P1_NAME
    ORDER BY ts
    I have to use a walkaround query
    SELECT null, ts, used
    FROM
    SELECT null, to_char(ts,'mmdd') ts, value
    FROM same_table
    WHERE ts >= TRUNC(SYSDATE) - :P2_DAYSAGO - 1
    AND name = :P1_NAME
    ORDER BY ts
    Further more, it seems :P1_NAME in the same subquery is not working for the chart, i get xml parsing errors in SVGviewer, however the same query works for the spread sheet area, I am really puzzeled. Not sure whether it's dumb tool or dumb me :-)
    Appreciate your help!
    Jianhui

    <quote>
    Further more, it seems :P1_NAME in the same subquery is not working for the chart, i get xml parsing errors in SVGviewer, however the same query works for the spread sheet area, I am really puzzeled. Not sure whether it's dumb tool or dumb me :-)
    </quote>
    For this particular issue, I found out that neither is the tool dumb nor is me. It's SVGViewer messed up with the firefox browser, after I rebooted the computer this morning, problem is gone. I didnt reboot after I copied SVGViewer dll and zip file to firefox plugin directory yesterday. Never had that pain with IE and Netscape, oh well :-). So please ignore this section, however other questions are still unsolved puzzles for me. Thank you all if you can share some light on those questions.

  • Table Link on the same page in Numbers '09

    I didn't word this correctly but I will try to explain what I'm trying to do.
    I have a sheet of birthdays, which is only 2 columns and its sorted by date. I want to have the table continue the sorted information on the same page. For example, There are 4 pages each with 2 columns, I want to put as much information on one page like 1/1 - 5/5 on the first half of the page then continue 5/6 - 8/30 on the second half of the page, maintaining it being sorted.
    I'm not sure if this made any sense, but an example would be in pages if I have 2 text boxes and link them the information will spill into the next text box.

    I came up with what may be a better idea after writing all this. But rather than delete it, here is my first idea:
    Numbers does not have page breaks and I can't think of a way to do what you want the way you are asking. But what you can do is use your original table as a master and have several other, smaller tables that break it up as you want. For instance, a table that has only birthdays in January 2009 could be constructed with the following formula in cell B2 (the date column) and A2 (which I am guessing is the person's name):
    B2=IF(AND(Table 1 :: B2>DATE(2008,12,31),Table 1 :: B2<DATE(2009,2,1)),Table 1 :: B2,"")
    A2=IF(B2="","",Table 1 :: A2)
    This table should be longer than your master table. It should be longer than you think your master table will get. Otherwise the dates at the bottom of your master table, as you add to it, will not be transferred over.
    After you have those formulas in columns A and B, go to the reorganize panel and choose to show rows where column B is not blank. That will hide all the blank rows. And you can sort it.
    Create other tables for your other groups of dates. You'll have to sort each table separately if you add more birthdays to your master table.
    You can arrange your tables on the page so several of these tables are side by side. I would not recommend arranging them with any above another.
    If you want to get fancier, you can use two header cells of each table to specify the start and end dates. Then, instead of hard coding the dates into the formula, you would reference those two cells.

  • Can I print 2 different reports consecutively on the same page?

    I need to print two different reports on the same page. E.g.
    Page 1.
    Report 1
    Report 2
    --------------- page break ---------------
    Page 2
    Report 1
    Report 2
    --------------- page break ---------------
    Is there any way to ensure that the physical page in printer does not eject when Reports finishes printing Report # 1? Also Report # 2 could span to multiple pages, but Report # 1 will always be a fixed form report.
    Thanks for your help
    Aparna

    Hi Srini,
    I suppose I could do as you suggested, but then that would be a work around, not a solution... Actually the Report # 2 that I have can be called independently and hence if I do as you suggest, I would have to make the same report twice. Hence any other ideas?
    Thanks,
    Aparna
    null

  • Want report title on the same page above the column names

    Hi,
    I have given report title in the report header but for some reason it displays title on first page and data from next page on wards. I have also given a page break for the groups, is this the reason for getting  title on one page and dtata from next page?
    Pls suggest me something so that i can have report title on the top and then data stating frrom the same page.
    Thanks

    Expand the page header, move your column headings down, and put the report title at the top of the page header.
    The title has to be in the PAGE header in order for it to print on all pages.
    HTH,
    Carl

  • Link to the same page in javascript

    Hi i am developing tables in java script. If i click the row in the table i will get clicked row in the blow function.If i want to call to a graph which should be displayed in the same page how to do?
    function(event, column, row){
    }

    Hi from the below function i get column number of the table i want to prepare some action and display output in same page with previos tables;
    ie before there is only table in the web page not after taking action the web page should display table+ output;
    function(event, column, row){
    }

  • I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the  same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

    I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

    This is covered in the basics section.
    A restore loses nothing.
    A restore does.  If you are using the iphone as designed, then everything should be on your computer.

Maybe you are looking for

  • New iMacs compatible with Wacom Cintiq

    I am going to be buying my first iMac next year. That being said will the new design of the iMac have the ability to hook up essentially an additional monitor? I am replacing my Wacom Intous3 and upgrading to a Cintiq next month and I am wondering if

  • Dvd-hardware enable problem

    Hi there,  well i just bought my MSI G4MX (64MX440-T) i installed it in my system everything just went perfectly but i was just trying to use it to get a better DVD watching time with its DVD - hardware support i used the program Power-DVD Xp version

  • Cost Center planning Error.

    Dear All, I am getting problem wih Fund in doing Cost center planning (kp06). In client level there are 2 controlling areas one is 4000 and another is 6000. the compny code which assigned to controllinga area 6000 they activated fund. but the company

  • InDesign Color Proofing

    I'm trying to develop an InDesign proofing workflow in an effort to get the most accurate colors possible. I'm currently using an Epson WF-7520 inkjet printer. Unfortunately, none of the the color profiles that come with this printer are CMYK. I've b

  • Safari won't load plugin

    I'm trying to watch ESPN360, but the Move Networks player won't load. It was working before I replaced my hard drive(it died). I used time machine to restore all my files, info, etc..., but now this player won't load. Someone please give me some Idea