Open Sales Order Qantity / Value

Hello Experts,
we need in BW the information of open order quantity (ooq) and open order value (oov) from our SD.
In our opinion the ooq and oov have to be "open", until the delivery have status post good issue.
But SAP-Standard is, after creating the delivery, the oov and ooq is going to decrease.
Does someone have a hint, how this problem could be gone around?
Thanks in advance.
Best regards
Achim

R/3, in SD, the order quantity is not open from when you create the delivery. This is right because otherwise it is not possible to valued the material stock allocated. In BW youcan solve this issue by using the order line item status.
I hope this help.
Antonino

Similar Messages

Open Sales Order quantity & value

Hi,
We have a requirement here of report to show open sales order quantity & value for any month (monthend). There is a datasource 2LIS_11_V_ITM which gives Open order quantity. I have created an ODS with 2LIS_11_VAITM & 2LIS_11_V_ITM which can give me desired qty & value, but only for date of last data upload and not for date in the past.(and to get that, I have to sumup all open orders quantity without using any date filter)
I am thinking of creating a Infocube over this ODS to update the Open Order qty & value at the monthend (Snapshot scenario). But to update this, I am not able to get the logic for date to be used in time dimension.
If anyone can think of the solution or any alternate way to develop this kind of report, your help/suggestions are most welcome.
Thanks,
Vikram.

Hi Vikram,
Find the link, which solves u r requirement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/arobustdesignofopensalesorderdataflow
Thanks & Regards
Ramakrishna Kamurthy

Open sales order credit value (S066-OEIKW)

Hello experts,
I need to update the table S066 with the Open sales order credit value when an item has no confirmed quantity (VBEP-BMENG). So I have created the new rountine under
VOFM -> Requirements -> Credit checks -> new include RVKMP901. But I don't know how to update this table.
From the note 377165, the same is explained. But I am niot able to achieve my requirement.
So please help me in this regard.
Waiting for your reply.
Any Suggestion...
With regards,
Vasanth M
Edited by: Vasanth M on Feb 15, 2010 8:21 PM

Hello Jack,
Thanks fo your answer. But I have to update the credit amount to the table S066.
This credit limit could be viewed in the TC FD33. So please suggest me what to do.
Thanks in Advance
Best Regards,
Vasanth M

How to summarize Open sales order credit value

Hi, friends.
I am designing Add-on report about credit exposure.
I found the relevant tables of Credit Limit in FD32
KNKK
S066
S067
Then, I would like to show the document details of open sales order credit value in the report.
I tried to summarize the open sales order amount from VBAK, VAUK, VBAP, VBUP.
However, it doest match to the amount in S066 table.
Can anyone tell us how to summarize Open sales order credit value from SD documents?
Regards,
Yu

Sudheer,
You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
In the credit controal settings, you need to have settings for the credit check at the delivery level.
Hope this will solve your issue.
Regards,
Chetan
Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

Open sales order vaue showing difference at va05 and S066

HI,
what is the difference between open sales order net value(va05 only selected open sales orders check box) and open orders credit(Table S066).
Customer is asking this question?
Here when i was checked at VA05 level for particular one customer EX 15456 and executed only open sales orders and it's showing the net value is total = 45,45254 and i checked the table S066 FOR open orders credit it's showing is = 0.
These two(va05 and S066) are executed between these two dates 3-1-2012 to 16-2-2012.
Please help me any one why it's showing differece.
Thanks,
pandu

Hi
1. Is credit management active in your system?
2. If yes, is it assigned to the relevant sales order type that your are checking the value in VA05?
3. Go to SE38 and enter program CHECK_CM, execute for a particular sales order and check the reason for credit update not happening.
Regards
Madhu

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

Hi,
   Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
   What could be the reason ?
   Pls help.
Regrds,
Binayak
Message was edited by:
        Binayak Ghosh
Message was edited by:
        Binayak Ghosh

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Not Updating Open Sales Orders Value for CreditManagement

Hi Frendz,
This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value is 10th.
Let me know Where i have missd settings.
Hari Prasad

hello,
it is maintained against the cr control area in ent structure.
one needs to change there.
r u in prd system or development?
becoz if prd, then this change will effect a lot of ongoing docs.
rgs,
AK

SQL Open Sales Orders Value using today's currency rates

Hi experts,
I am creating a report for displaying the open sales order values (and other fields) using current currency rate (where applicable). I developed the below query. The only problem with this query is that it ignores the order rows in which the currency field is blank (Don't understand why this happens in SAP). Do you have other ideas?
Thanks & Regards,
IC
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name", T1.ItemCode,
T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM', T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered", T1.OpenQty as 'Bal Qty', T1.Price*T1.Quantity/T4.Rate AS "Ord Value (GBP)", T1.Price*T1.OpenQty/T4.Rate AS "Open Qty Val (GBP)", T1.Price/T4.Rate AS "Price (GBP)", T1.Price*T1.OpenQty as "Ord Value (BP Currency)", T1.Price as 'Price (BP Curr)', T1.Currency as 'Cur Ind', T4.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod, ORTT T4 WHERE T0.DocCur <> 'GBP' AND T1.Currency=T4.Currency AND T4.[RateDate] = [%0] AND T1.OpenQty > 0
UNION ALL
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name", T1.ItemCode, T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM', T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered", T1.OpenQty as 'Bal Qty', T1.LineTotal AS "Ord Value (GBP)", T1.LineTotal/T1.Quantity*T1.OpenQty AS "Open Qty Val (GBP)", T1.LineTotal/T1.Quantity AS "Price (GBP)", T1.Price*T1.OpenQty as "Ord Value (BP Currency)",T1.Price as 'Price (BP Curr)', T1.Currency as 'Cur Ind', T1.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod WHERE T0.DocCur = 'GBP' AND T1.OpenQty > 0 ORDER BY 2,1

Hi,
Try:
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name",
T1.ItemCode, T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM',
T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered",
T1.OpenQty as 'Bal Qty', T1.Price*T1.Quantity/T4.Rate AS "Ord Value (GBP)",
T1.Price*T1.OpenQty/T4.Rate AS "Open Qty Val (GBP)", T1.Price/T4.Rate AS "Price (GBP)",
T1.Price*T1.OpenQty as "Ord Value (BP Currency)", T1.Price as 'Price (BP Curr)',
T1.Currency as 'Cur Ind', T4.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
LEFT JOIN ORTT T4 ON T1.Currency=T4.Currency AND T4.[RateDate] = [%0] AND T4.Rate != 0
WHERE T0.DocCur != 'GBP' AND AND T1.OpenQty > 0
Thanks,
Gordon

Open sales orders value not updating currectly in sales value of CM

Hi SAP experts,
I have an issue some of customers credit exposure value showing worng value.We are using static credit limit check.
customers credit limit RM20000,
open sales order valueRM6,073.77
open delivery=0
open billing =0
open items(recievables)=3,464.39
Credit exposure =9,538.16.
But i have checked in VA05 its showing 13,001.10 value, i have checked all areas didnt get any solution.
I have run the reports RVKRED09 and RVKRED77 , RVKRED88 also no updates in the credit management.
is there any other areas i need to check, advise me.
Regards,
Nooka

The only thing you really need to check is RVKRED88.
It is not the correct procedure to compare the open sales order value with the sum net value of VA05.
In VA05 open documents are displayed indifferent whether they are already part-delivered or not. That's why the open values from the VA05 are not directly comparable with the values in RVKRED77.
As described in OSS note 716141; reports RVKRED88/77 shows the correct value which should be in your system.
If you need to know more let me know.
Thanks,
Gerard

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

How to Avoid Open Sales Order Value from Credit Check

Hello Everyone,
We have a problem with Credit Management, When my user run the execute credit master sheet, system is considering open sales order value under Credit limit used. My user do not want consider open sales order value, they want only Open delivery and Open Billing value need to appear in Credit limit used.
Is it possible to avoid open sales order values, if yes what setting i need to do....please help me.
Thanks
Sudheer

Sudheer,
You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
In the credit controal settings, you need to have settings for the credit check at the delivery level.
Hope this will solve your issue.
Regards,
Chetan
Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

Where is Open Sales Order Value coming in Credit Master sheet?

We have a customer whose credit exposure is below credit limit. I'm in Customer Credit Management overview screen and I ran Credit Master sheet report (for this CMR) under Environment -> Reporting -> Credit Master Sheet.
I see value in Receivables and Open Sales Order Value which sums up to Credit Exposure Value. I'm wondering which sales orders are considered to calculate open sales order value?
I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value.
I manually compared Open Sales orders based on Horizon date, the value that I'm arriving is kind of close of Open Sales Order Value in Credit master sheet report.
Update rule used is 000012 in automatic credit control screen.
Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
Appreciate any help!

. I'm wondering which sales orders are considered to calculate open sales order value?
Those customer orders which are relevant for credit limit. Please let me know if you are talking about something different?
I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value
.You can not compare the VA05 open sales order report with FD32 open sales order report.
You can find out the open order values of Credit manangement(FD32) in S066 table.
Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
For open sales order you can find out in S066 table and sales values in KNKK table

Wrong value at open sales order

Hi experts,
with us today is a mystery surfaced.
The value of open customer orders from R/3 has been multiplied with the net weight from the material master and appears in our planning book as open sales orders.
But this happened only at 1 customer and only 1 material.
Does anybody has any clue how this could happen?
Thanks,
novize

Could be a macro that does this for the specific material or materials ( you have mentioned that the problem is just for one material , but there could be more ) .
Also if you have any custom logic in the so user exit then that logic could be doing this for the specific material(s). Check all this.
Thanks
Aparna

Open Sales Order Qantity / Value

Similar Messages

Maybe you are looking for