Open sales orders not to be taken into account

Hi all,
As i was doing credit management....i have dechecked open orders in the Automatic credit control
still during credit check it picks up the open order value...
can anyone please suggest me how to avoid of calculating open order values....
Cheers,
Ram

Hi All,
Just saw all your replies, Thanks a lot for all those replies.
I have
            unchecked open items
            unchecked open orders
   and update group is 0000018.
Still system takes open order value into consideration.
As analysed found that if it is a Dynamic check even if you have unchecked open items & orders system still takes sales orders into consideration.
But here i have one more problem that when i change Horizon Date(which is now showing the current date) in FD32 and save it and again if i open it system shows me the current date only again how to change it??
Thanks in Advance.
Cheers,
Ram

Similar Messages

  • How to get all open sales orders of a customer and also account group

    I want to know the logic to find all open sales orders of a customer and also account group

    Hi,
    You can check the status weather a Sales order is Open or not by checking its billing status form the following:
    Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
    Rward points if helpful answer.
    Ashven

  • Public Holiday calendar not to be taken into account for Sick Leave

    Dear All,
    I need help.
    Public Holiday calendar not to be taken into account for Sick Leave.
    Eg -When I employee applies for sick leave, the public holiday in between the dates shouldnt be considered. How can I configure this requirement.
    Please help.
    Regards,
    Poornima

    For that group, you need 2 counting rules:
    - one for Holiday Class 0 (not a public holiday) and Day Work Schedule Class 0 (not a working day)
    - one for Holiday Class 0 (not a public holiday) and Day Work Schedule Class 1 to 9 (a working day)
    If you want, you can add an other one or two for Holiday Class 1 to 9 (public holiday)
    extract from our T556C
    2       1   10 Q      10 Sick leave deduct from quotas (incl personal/spec) XXXXX   X  X    XXXXXXXXXX  XXXXXXXXX X X        XX XX    100.00  100.00              1     1       10              
    2       1   10 Q      11 Sick leave deduct from quotas (incl personal/spec) XXXXX   X  X    XXXXXXXXXX X          X X        XX XX      0.00    0.00              1     1       10              
    2       1   30 Q      10 Special leave with pay (with quotas deduction)     XXXXX   X  X    XXXXXXXXXX  XXXXXXXXX X X        XX XX    100.00  100.00              1     1       30              
    2       1   30 Q      11 Special leave with pay (with quotas deduction)     XXXXX   X  X    XXXXXXXXXX X          X X        XX XX      0.00    0.00              1     1       30

  • LSMW For Converting Open Sales Orders (not working for more than 1 item)

    Hi,
    I am using following standard object for Open sales orders .
    Object               0090   Sales documents                   
    Method               0000                                     
    Program Name         RVINVB10                                 
    Program Type         D   Direct Input                         
    Its not working for more than 1 line item.
    For more than 1 line item its giving Error saying that
    '102122                         V1                   845
    Print parameter SAPML2 1 is not defined
    Can anybody help me out in this regard.
    Thanks in advance.
    Nitin.

    hello, friend.
    i will still research the subject.  but the first thing that comes into my mind is t-code VA05.  with this, you have the option to change the Plant en masse.  so a possible workaround is for you to list a number of sales orders using VA05.  you then sort the line items by Plant.  choose all items with the same plant, change the plant via mass change... then change back to the original plant.  hopefully, the new settings should apply.
    do test a few sales orders by doing this for a larger scope.
    regards.

  • Open sales order not getting updated in FD32

    HI
    We are configuring Credit management, and found that the open sales orders are not getting updated in FD32.
    I have checked all the settings in OVA8 and all are working fine. This is a Static credit check and system is blocking the customer in case, the limit is exceeded. But the values are not getting reflected in FD32, for open sale orders, that are not blocked.
    Info structure S066  in OMO1 all are configured perfectly. I have run F.28 and no log was issued.
    Request to suggest other reasons for not getting updated in the table.
    I have gone thru the previous threads, but cud not find any solution.
    Regards
    Vamsi Javaji.

    Hi Vamsi Javaji
    First of all check in OVA8 wheather you have checked Open sales orders feild or not . Secondly check in your pricing procedure wheather you have maintained Subtotal A or not for the Net Value .Also check wheather you have assigned to your sales document type correctly or not  Finally check in OMO1 wheather S066 has been assigned correctly or not
    Check wheather you have assigned the Credit control area to the customer in CMR , in sales tab
    Regards
    Srinath

  • Updates to aliases seems not to be taken into account

    Hello,
    After having re-installed my email server on a macosx server snow leopard leopard, I tried to setup again my use emails accounts by modifying the aliases files, re-generate the aliases.db file, restarting the email service. Initially, I have an account where the email account is "firstnamelastname". I then added a line in the aliases file like:
    <<
    firstnamelastname: firstname.lastname, firstname, info
    >>
    Doing so, I should have 3 new email aliases
    Then I re-generated the aliases database using "newliases" (or "postalias" to re-create the db).
    Finally, I restarted the service and tested out the aliases.
    results:
    A trace in the smtp log like "No record for user firstname.lastname"
    Any ideas? Thx
    Regards,
    Daniel

    For that group, you need 2 counting rules:
    - one for Holiday Class 0 (not a public holiday) and Day Work Schedule Class 0 (not a working day)
    - one for Holiday Class 0 (not a public holiday) and Day Work Schedule Class 1 to 9 (a working day)
    If you want, you can add an other one or two for Holiday Class 1 to 9 (public holiday)
    extract from our T556C
    2       1   10 Q      10 Sick leave deduct from quotas (incl personal/spec) XXXXX   X  X    XXXXXXXXXX  XXXXXXXXX X X        XX XX    100.00  100.00              1     1       10              
    2       1   10 Q      11 Sick leave deduct from quotas (incl personal/spec) XXXXX   X  X    XXXXXXXXXX X          X X        XX XX      0.00    0.00              1     1       10              
    2       1   30 Q      10 Special leave with pay (with quotas deduction)     XXXXX   X  X    XXXXXXXXXX  XXXXXXXXX X X        XX XX    100.00  100.00              1     1       30              
    2       1   30 Q      11 Special leave with pay (with quotas deduction)     XXXXX   X  X    XXXXXXXXXX X          X X        XX XX      0.00    0.00              1     1       30

  • Getting data in GATP Planning area on open Sales Orders yet to be PGI'ed

    This is in context of allocation planning.
    I understand there are two internal GATP relevant key figures AEMENGE (allocation) and KCQTY (incoming sales order quantity) which come over from R3. These two key figures are part of any allocation planning design to track consumption of allocation from sales orders.
    We have a requirement to also get information on open sales orders not PGI'ed into GATP planning area. Is there a way to do this without configuring SNP and only core interface ? (Releasing data from SNP to GATP does not work since the levels are different)

    Hi
    Just to correct you. The tcode is LBWQ and not LBQW.
    Well as per your lines that it is not possible for 400 users to manually feed the data after changes .I totally agree.
    To help get the same functionality we have v3 jobs or direct delta which serves the same job for you.
    This is a job that runs at a regular interval as per you set it in the tcode LBWE.
    If the Datasource is Delta Enabled then only these jobs would be available to run for those data sources and if incase the DS is Full then you dont need these jobs at all.
    Thus once you set your DS as Delta. Go to LBWE select the DS you are working upon for delta
    After finding the DS you see two options update mode and update.
    Update mode -you can choose the type of update mode for example direct, queued and so on.. Generally we use Queued Detla
    Update - you have to set here how do you want it to run and from wat date etc.clickin on job control gives you a window where in u can set all the fields as per ur requirement.
    Once after these are done your job would automatically run and collect the changed records to the delta queue and from there you can pull the same using info pack.
    Hope that clarifies your doubt to some extent.
    Edited by: Puneet Chawla on Jan 29, 2010 8:52 AM

  • Open Sales Order

    Hi All,
    How to make Open Sales Order Report for previous year.my client want to open sales order list as on 31/03/2014.
    please suggested me.
    Thanks&Regards,
    P.Pratap

    hi all,
    thanks for your replies,
    i need open sales orders before 31032014. plz look into the below scenario
    for ex:
    S.no    Sales order No   still open      31/03/2014     closed date
      1         101                   open             Open       
      2          102                   closed          Open           03/04/2014
    3           103                  closed           Open           01/04/2014
    i need report like these 3 open sales orders as on 31/03/2014.

  • Table Name to take report of Open Sales Order items&its relevant GL Number.

    Hi,
    I wanted to take a report with Output as Open Sales Order Items and its relevant GL account numbers. is there any T Code in the Standard or atleast the table name.
    I have already fetched the Open Sales Order Items from T code VA05, but i need the relevant GL account numbers also.
    Any pointers on this will be appreciable.
    Rgds,

    Hi
    There are no standard reports where in you can fetch the data of the open sales order items and its G/L accounts with the output. But  by creating your own report using LIS then it is possible
    Regards
    Srinath

  • Sales orders ans reservations not taken into account on MPS / MRP

    Hello,
    I am implementing the MPS / MRP and I have the following problem:
    I have modified the necessary material master fields to take into account some materials on the MPS / MRP execution. These fields are MRP type, Lot Size, Strategy group and Availability Check.
    Then, executing the MPS / MRP I have realised that only the sales orders and reservations created after the material master modifications are taken into account when I execute the MPS / MRP.
    I suppose this is because the sales orders and reservations created before the material master modifications did not create the requirements because the availability check was not set for the material and so on... but I need to take into account these "old" reservations and sales orders .
    Is there any way to "update" these orders and reservations?? Or I need to delete them and create new ones??
    There are several sales orders and reservations created before the material master modifications. I think there have to be an standard way to update them.
    Thank you very much in advanced,
    Jordi.

    Dear,
    Are you getting these reservation in MD04?
    Check the Planning file entry for these material in MD21 if not then create it through MD20 and take MRP run with planning mode -3 Deleted and recreated. And Processing key NETCH.
    Also check the The firmed receipt is within the rescheduling horizon. The rescheduling horizon is set in Customizing for the MRP group (Transaction OPPR, Table T438M). A default value can be predefined in the Customizing of plant data (Transaction OPPQ, Table T399D). define the longer duration for it.
    The firmed receipt (the MRP element) participates in the rescheduling check. You can set which MRP elements participate in the rescheduling check in the Customizing of the plant data (Transaction OPPQ).
    Else you can carry out modification A using the MD_CHANGE_MRP_DATA BAdI and the CONSIDER_RESB method without making a modification.
    Regards,
    R.Brahmankar

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

    Hi,
       Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
       What could be the reason ?
       Pls help.
    Regrds,
    Binayak
    Message was edited by:
            Binayak Ghosh
    Message was edited by:
            Binayak Ghosh

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Not Updating Open Sales Orders Value for CreditManagement

    Hi Frendz,
    This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
    Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
    EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value  is 10th.
    Let me know Where i have missd settings.
    Hari Prasad

    hello,
    it is maintained against the cr control area in ent structure.
    one needs to change there.
    r u in prd system or development?
    becoz if prd, then this change will effect a lot of ongoing docs.
    rgs,
    AK

  • Open sales orders value not updating currectly in sales value of CM

    Hi SAP experts,
    I have an issue some of customers credit exposure value showing worng value.We are using static credit limit check.
    customers credit limit RM20000,
    open sales order valueRM6,073.77
    open delivery=0
    open billing =0
    open items(recievables)=3,464.39
    Credit exposure =9,538.16.
    But i have checked in VA05 its showing 13,001.10 value, i have checked all areas didnt get any solution.
    I have run the reports RVKRED09 and RVKRED77 , RVKRED88 also no updates in the credit management.
    is there any other areas i need to check, advise me.
    Regards,
    Nooka

    The only thing you really need to check is RVKRED88.
    It is not the correct procedure to compare the open sales order value with the sum net value of VA05.
    In VA05 open documents are displayed indifferent whether they are already part-delivered or not. That's why the open values from the VA05 are not directly comparable with the values in RVKRED77.
    As described in OSS note 716141; reports RVKRED88/77 shows the correct value which should be in your system.
    If you need to know more let me know.
    Thanks,
    Gerard

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

Maybe you are looking for