Open SAP Transaction in SAPGUI window from Other programs

Hi,
We have an intresting requirement in which we have to run an SAP transaction, like SE37,in SAPGUI from a Web application.
In detail:
When an user clicks on a particular link, say an account number, in a web application, we need to open SAPGUI and run a partucluar transaction in SAP to get account detials and show it in SAPGUI.
That means we need to fo the following steps behind the scence.
Case1:
-1 Open SAPGUI
-2 Login the User
-3 Run sap transaction with parameters
-4 Display the results in SAP R/3 GUI
Case 2: Assume, If the SAPGUI is already launched by the user (i.e. steps 1 & 2) , Can we do steps 3 and 4?
I am new to SAP and not sure wether this will be possible at all or not. Please advice.
Thanks,
Sree

check the code given by thomas jung in this thread
Calling a R3 transaction in BSP
he has also mentioned of Java SAPGui which can be opened as an applet in a web browser
кu03B1ятu03B9к

Similar Messages

Firefox 3.6 doesn't open links clicked from other programs (IM, etc.,)

Whenever I try to open a link from either my IM or an IRC program like mIRC it won't open in firefox. I have to copy and paste the link.

I now have FireFox 32.0.2 no joy. I have loaded ThunderBrowse which took care of Thunderbird but still can't load links from other programs. I fixed this before (other backups, I crashed my windows C drive and have been trying to restore), but can't remember how. I think it required reloading IE (I had deleted IE on my latest restore), but I have now done that with no joy.
When I click on a link from another program, nothing happens, and when I right click and am offered "open in browser" nothing happens, and when offered " copy browser link" it doesn't copy.
I tried resetting FireFox, no joy.
Noticed control panel "set program access" doesn't hold, always goes back to custom, and defaults to "uses default browser"!
Please help!

Links from other programs won't open in Firefox

This has been asked a number of times before, but none of the answers worked for me. I have Firefox 26.0 (the most stable for me) and Thunderbird 24.6.0. After a computer crash and reloading both programs, I first noticed the problem with links from Thunderbird, both clicking and right clicking with "open in browser". But then I remembered trying to open help in MS word and Frontpage which are supposed to open from the internet.
I have checked that Firefox is the default browser, changed the file (none) file transfer protocol, then deleted it, etc. Nothing helps.

I now have FireFox 32.0.2 no joy. I have loaded ThunderBrowse which took care of Thunderbird but still can't load links from other programs. I fixed this before (other backups, I crashed my windows C drive and have been trying to restore), but can't remember how. I think it required reloading IE (I had deleted IE on my latest restore), but I have now done that with no joy.
When I click on a link from another program, nothing happens, and when I right click and am offered "open in browser" nothing happens, and when offered " copy browser link" it doesn't copy.
I tried resetting FireFox, no joy.
Noticed control panel "set program access" doesn't hold, always goes back to custom, and defaults to "uses default browser"!
Please help!

Is it possible to execute SAPGUI scripts from java program?

Hi everyone..
     I need to develop an java applications that executes the SAPGUI script or any technique that execute set of transaction as client.
     Is it possible to execute SAPGUI scripts from java program? if so, how it can be achieved? is there any other technique to achieve above mention scenario?.
     it will be more helpful, if docs related to that are shared..
     Thanks in advance

Oh, bummer. Would be much more convenient if I could just use iTunes for everything. Can't stand WMP. I wonder if WinAmp might be a good compromise?
Thanks for this answer . . .
Sharon

Line Breaks missing in captions from other programs...

I've spent the last few hours searching around, and I've been unable to find any solution to a weird thing I noticed.
I've recently purchased LR 3.4.1 and when I imported a handful of older pics that had had the captions set using Bridge, the line breaks were now gone.
I then went to Bridge and tested it, and sure enough, it can read line breaks from LR, but the opposite doesn't seem to be true. As part of my work, I get a bunch of photos that other photogs have shot and added captions to via Bridge, but I can't seem to find any check box or setting on how to get LR to read the line breaks.
Any one have any advice on how to get LR to read line breaks from other programs? I'd hate to have to go through and re-caption each and every single photo, especially when adding the older ones into LR to use it as a DAM.
Thanks!

This is a long-standing, annoying bug in Windows LR that has been acknowledged by Adobe:
http://feedback.photoshop.com/photoshop_family/topics/newline_bug_in_caption_text
Please go to the feedback site and vote for that issue to get fixed.
It is just a display problem in LR -- the line breaks in the metadata are preserved, and if you enter line breaks in the metadata, they are preserved too.

HT5958 This new closed Library system stinks. Now you can't access media from other programs. Any work around?

Let me start by saying I have been using FCP X for a year now and really love it. We produce a half hour weekly TV series so I put it through its paces on a weekly bases.
I was horrified to return from the holidays to find out that an automatic update yielded a whole new file system. By packaging all of the Final Cut Event and Project folders into a single library file you can no longer access the original media from other programs such as Photoshop and After Effects without making two copies of all of the media. This really cuts into the pipeline. In the past we were able to recreate new show opens and transitions quickly from within After Effects by linking to the original media in the event folders to use them as source files in compositions. The same was true of grabbing frames from Original movies for use in Photoshop for promotional materials. With the use of the Libraries, ALL OF THE LINKS ARE BROKEN. Yes I know you can right click on a library and still view the files, yes they are still there, but you can't do that from within another program.
This Library system doesn't make any sense. Its a step back from the old system. It was much easier, quicker, and efficient to move large event libraries and projects off and on the system and backup using Finder. Now you have to open up Final Cut to do everything and its a lot slower.
I want to appeal to any Apple developers who monitor this to return to the old system of file management.

Media does not have to be stored inside the library. Use the Consolidate library or event to move it to an external location.

CD Drive or DVD drive is missing or is not recognized by Windows or other programs - this happens any time I upgrade itunes

I just upgraded to the new version of itunes for my ipod touch. My CD Drive or DVD drive is missing or is not recognized by Windows or other programs occurs and it does not show up listed as part of my computer. How can I fix this?

Your DVD drive? Why would this be missing after a iTunes download?

I can't print in Adobe 11.0, I can print from other programs?

I have confirmed that I can print from other programs.
I have uninstalled Adobe and reinstalled to make sure the programs was the most up todate.
I have installed a new printer just today and confirmed the drivers are up todate.
I have confirmed there are no security issues with the document - documents.
I have tried printing the document as an image and it still will not print.
I don't get any errors, just nothing happens. It doesn't even go into the print que
Help!

I tried printing a simple PDF.
We couldn't print PDF's prior to the replacment of the printer, but I thought replacing the printer might help.
I have pulled some tech people here at the office to see if there is a common denominator between the computers and or the issues arising and nothing is coming up.
This is just so odd.

I can't paste text from other programs

For some strange reason, PE12 wont let me past text from other programs and Idk why?!

What happens when you try? Any error message?

Can I share files from other programs or just Adobe apps files. I work with Final Cut and Premiere X

Can I share files from other programs or just Adobe apps files. I work with Final Cut and Premiere X.? Need to share files up to 6GB.
I need to know if the 20 gb limit is about all that I share, or if it's just about whatis in the clouds. If I take, recover my limit?
The speed of upload e download is good?

The Creative Cloud file storage could be used for video assets but speed and performance might vary based on location. I would suggest you testing it out yourself using your Adobe ID before subscribing. Performance would not change after you joined.
-Dave

Outlook 2010 paste from other programs not working.

Hi,
Win 7 SP1 x86 w latest patches. Win lang. ENG
Outlook 2010 SP1 x86 w latest patches. Office lang. ENG
Regional (date/time and so on) settings EE (Estonia)
I have about 6 users with same conditions.
When I'm trying to copy - paste from other programs like IE9, Word, Excel I'm unable to paste into Outlook message body.
It just wont paste.
Typically, Outlook shows me "thniking circle" for a millisecond or rarely just hangs.
There are some exceptions:
1. I'm able to paste into To: field
2. I'm able to paste into Subject: field
3. I'm able to paste even into body if I copied text from Notepad.
4. I'm able to paste into body when I copied text from another email.
Additional information:
Outlook default message format "Plain text" (Rich text, HTML - does'nt matter)
What I'v tried so far and results:
1. Repair Office installation trough "Programs and features" - NO LUCK
2. Changed default paste behaviour from other programs to "keep text only" - NO LUCK
3. Used SAFE MODE - this helps, paste SEEMS WORKING correctly. Based on my knowledge, SAFE mode mainly disables Add-ins. OK.
Disabled all Add-ins in normal mode so Outlook shows that "No Active Application Add-Ins" - NO LUCK
So, I'm out of ideas. I think that this problem starts after installing Office 2010 SP1
I don't want to uninstall SP1 because for me it's not a solution (SP1 won't dissapear from the list of updates), ok.. agree, it may be
temporary solution but at the end of the day, there must be something else.
Any ideas?
rgds Sven

Rename normailemail.dotm to .old when Outlook is closed and see if it works now.
You can find the file here;
C:\Users\%username%\AppData\Roaming\Microsoft\Templates
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info
Thanx, NormalEmail.dotm did not do anything for me but the renaming the Normal.dotm in the same folder did the trick for me. I can paste links again into outlook :)
Win7 SP1 and Outlook 2010 32bit

Opening SAP Transactions in a Maximised New Window

Hi,
I have an SAP Transaction iview that should open an SAP WinGui Transaction in a maximized new window.
I have set the following properties
Launch In =1
Height Type = FULL_PAGE
Height of External Window = -1
Width of External Window = -1
The new window is opened and the correct transaction is run, but the window is not maximised, and changinging the values of the properties of Width/Height of External Window has no effect.
The portal version is EP6.0 SP2 Patch 4 Hotfix 7
Thanks Hugh

Hi Nalla,
I suggest you the below points to achieve your requirement
Create a view V_FPM_APP and insert an iFrame ui element
Create an attribute FPM_URL as string and bind it to the source of iFrame ui element
Create a window, W_FPM_APP and embed the view V_FPM_APP
Now, you can use method CREATE_WINDOW of interface IF_WD_WINDOW_MANAGER to open the FPM application and pass parameter MODEL = ABAP_TRUE
You can register the onClose action of popup window to your own action on view as below
          data lo_view_ctrl type ref to if_wd_view_controller.
          lo_view_ctrl ?= wd_this->wd_get_api( ).
          lo_window->set_on_close_action(
               exporting
                    view = lo_view_ctrl
                    action_name = 'ON_CLOSE'
Create an action ON_CLOSE in view from where the popup window is called
Now, you get the control when user closes the popup window, so, you can refresh the main view
Also other way, you can use the concept component usages to achieve your requirement
Hope this helps you.
Regards,
Rama

Opening pictures in iPhoto from other programs

I'm wanting to use pictures from my iPhoto library in other programs-- i.e. Photoshop Elements or to upload to a website. When working from Photoshop Elements, when I go to File>Open>Pictures>iPhotoLibrary I get an error message. The only way I seem to be able to USE any of my photos stored in iPhoto is if I copy them to my "pictures" folder in the Finder and then use them. Of course, this means I am using double the space on my hard drive. There must be an easier way. What am I doing wrong?

So if I use Photoshop as an external editor, the Save function is only saving a copy? Does the copy go back into the original event this way?
When you set Photoshop (or an Image Editor) as an external and then go to edit the pic here's what happens:
1. iPhoto makes a copy of the file and sends the copy to Photoshop
2. Make your edits
3. Save.
4. The Edited version is returned to iPhoto and saved in the Modified Folder.
5. A new thumbnail is made and replaces the thumbnail in the iPhoto Window
Thereafter if you want to get to the Original you have several options:
a: Photos -> Revert to Original - this destroys the modified version
b: Export using the File -> Export command, set the *Kind: Original*
c. Any other form of export yields the edited version.
In Windows if one chooses save when editing in Photoshop, the original is overwritten,
This is true in Photoshop on the Mac too, the difference is you're using iPhoto, and it's +iPhoto making the copy+. Hence the 'Save As' to preserve your original is unnecessary.
which i can't seem to access in Finder browse mode or from iPhoto
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Adobe will not open PDF files from other programs

This is on one of the computers in our office. We use a medical records program called Sevocity. This program stores documents that we import into the electronic charts as PDF files. When we upgraded that computer from Adobe to Adobe Pro, it no longer opened the PDF documents stored there. Is this an issue with the medical program or with Adobe Pro? We already had Sevocity Support attempt to fix the problem, but they said the issue looked like it was with Adobe.
We would like to troubleshoot by re-installing AdobePro, but we want to make sure that none of our files stored to the Adobe Document Cloud. If we re-install Adobe, will those documents still be available in the online Adobe account's Document Cloud, or do we need to move those documents to the collective Creative Cloud?

Yeah, it does open from other sources like "My Documents", but sometimes it won't open the print previews in our billing system either. Communication error with secure sites and programs, maybe? I don't get an error message, though. It just displays the "processing" symbol next to the mouse for a second or two like it does when PDF's usually open, and then nothing happens. We are using Windows 7 on that computer. The other computer that runs on Windows 7 also has Adobe Pro XI, but does not experience these problems. I have also put in a ticket with Sevocity (the program that is not communicating with Adobe).
And that's a relief about the Document Cloud! We will try to re-install just in case it was something that went wrong with the initial install.

Opening sap transaction in uwl to webdynpro java screen

Hi Poral Gurus
I am new to uwl concept . we are in the process of the Leave apply and approval . the work items are displayed in the sbwp
which comes in uwl . when we click on the item in work list it is opening the sap transaction, but the requirement is there any way to convert the sap transaction view to the webdypro java screen . the screen should not no way look like the sap transaction but it should look like which is developed in webdynpro java using nwds
The problem here is the work item is opening the sap logon when an work item is being clicked and the screen also is not exactly what we look in sbwp. it is having a different look. the screen is becomming small where the user has to use scroll bars to navigate to particular input element,but in sbwp it is showing the full screen.
Please help on this is there any way to solve this problem.
Thanks
prasad

Hi,
Let us know whether you are using the standard Leave request application with standard workflow or customized screen.
If you are using Custom development for the approval screen, then Make sure that you have mapped your custom development screen to the workflow task in SWFVISU.
Then Re-register the UWL system in portal which is available in the below location.
System administration - system configuration - universal worklist and workflow u2013 universal worklist administration - Universal worklist systems - re-register the workflow system.
Thanks,
Nandhadevi.T

Open SAP Transaction in SAPGUI window from Other programs

Similar Messages

Maybe you are looking for