Open Slaes Order-How to check and close ?

Hi,
We have an open sales order which looks like the delivery is closed and 100% completed, but the sales order is still open!
Now i know this is an ongoing issue which has several possible reasons for and i have used a script to see what is returned but nothing.
Can you let me know how to check if there were any changes made in any particular Sales orders ?
eg comparing open items list of sales orders with something ?
Thank you in advance,

Hi,
Yes we ran the query in note 948670 and it came back zero for all?! See below for details.
This is what has thrown us so what is the simplest way to check why a SO remains open i.e how to check if there were any changes made?
Rdr u2013 0 Rows
Dln - 0 Rows
Rdn - 0 Rows
Por - 0 Rows
Pdn - 0 Rows
Rpd - 0 Rows

Similar Messages

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

I downloaded Photoshop cc trial, program opens, states program has a problem and closes right away. how can I get it to work?

I downloaded Photoshop cc trial, program opens, states program has a problem and closes right away. how can I get it to work?
I tried uninstalling and installing again same problem

Moving this discussion to the Photoshop General Discussion forum.

Open data slice for data entry and close afterwards

Dear all,
I have created one data slice for a characteristic combination country xy in order to prevent the data entry within the data entry query for the user. But for some reason I have to run a planning function in order to summarize some values and write a total value in the characteristic e.g. country xy.
The planning function brings out an error message because this can not be executed due to the fact that this combination is protected.
Is there a way to open the data slice before the planning function is writing the data in the cube? I have tried to to this in the Data slice exit, but I do not have an idea how to open the DS, save the data and close the DS again.
We are running NW BI 7.0. Any ideas would be great.
Best regards,
Stefan from Munich/Germany

I did something like this by creating an FM and calling that FM from a FOX function. I think you will have to use three commands to execute three functions one after the other (and not combine them in one planning sequence) - first one will switch off the data slice, next will be your planning function containing the logic, and the last will switch it back on.
The FM would be something like below:
FUNCTION Z_SWITCH_DSLICE.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_INFOPROV) TYPE RSINFOPROV
*"     REFERENCE(I_DSNR) TYPE RSPLS_DSNR
*"     REFERENCE(I_STATUS) TYPE I
*** This function imports the name of a real-time Infoprovider and a Data Slice number
***        and a parameter I_STATUS. If I_STATUS is 1, data slice is activated
***        If I_STATUS is -1, data slice is de-activated
data wa_ds type rspls_ds.
select single * from rspls_ds
        into wa_ds
        where infoprov = I_INFOPROV
          AND objvers = 'A'
          AND dsnr = I_DSNR.
if I_status = 1.
   wa_ds-used = 'X'.
elseif I_status = -1.
   wa_ds-used = ''.
endif.
update rspls_ds from wa_ds.
ENDFUNCTION.
The Fox code will be like below -
CALL FUNCTION Z_SWITCH_DSLICE
    EXPORTING
       I_INFOPROV = <infoprov name>
       I_DSNR = <Data Slice Number>
       I_STATUS = <0 or 1>.

Changing the print order for payroll checks and payroll deposit advices

Hello,
How do you change the print order of payroll checks and deposit advices?
Thanks
RW

Hi there crazytalk,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Does my desktop come with wireless capability with no need for a separate router needed to be purchased, when airport is opened up belkin wireless is checked and other locations are listed but locked? Does my xfinity unit have one or just a modem? TIA

Does my desktop come with wireless capability with no need for a separate router needed to be purchased, when airport is opened up belkin wireless is checked and other locations are listed but locked? Does my xfinity unit have one or just a modem? TIA

Your iMac does have wireless capability. It does need, however, some wireless network in order to connect to the Internet. It sounds like there are several networks in your area, including one Belkin router that is not encrypted and several other networks that are. I presume that you would know if the Belkin one is yours, and you would have mentioned it. Do not use someone else's network without their permission. In some jurisdictions it is illegal, in others it is merely foolish.
It is impossible to know what Xfinity has given you. Possibly it is only a cable modem, or perhaps it has a router built in. Call them and ask them. If it has a router built in, get them to help you set it up. Note that some tech support people for Internet service providers will resist working with Macs. Be persistent, it is not that different.
If they did not provide a router, you will need to get one. Apple makes the AirPort Extreme base station, the AirPort Express base station and the Time Capsule. Other companies have their own. Be sure you get one that is up to date and has 802.11n capabilities (for the highest speed) and go on from there.
Best of luck.

Open Production Orders, how to properly close

Hi Gurus,
How do you close your open production orders in the past, say 3 years ago. These orders have no effect anymore in terms of stock/cost. Whats the proper way of closing them?
Im trying to do a TECO, then CLOSE the order but system is not letting me so because I have open (undelivered) qty for that order. How do i close them?
Thanks guys,

Dear,
1. Complete the order technically by using Tcode : CO02--> Functions ( Menu)---> Restrict Processing -
> Technically Complete. You can carry out TECO for multiple Orders in Tcode : COHV (Mass Processing).
2.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
3.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
4.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
5.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Hope this helps.
Regards,
R.Brahmankar

My ipod touch keeps on lagging out every time i open a app it laggs out and closes down my ipod is a 2nd gen 16GB updated to the latest version HELP

Hi every time i open a app it starts to lagg and then it closes the app and then i will open it again 5seconds later it will close down again (i do not have the thing where you can open up the apps that are running and close them down) thankyou and please help me

Tryy the following in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from Backup
- Restore the iPod to factory defaults/new iPod.

How to check and change the dafault session timeout of the Portal?

Hello,
When leaving a portal page open without using it for a certain amount of time and then accessing it again the Session times-out.
Where can I check and change this default time-out time in case I would like to extand it for the end users?
Roy

Hi Roy,
Session timeout includes multiple settings (J2EE setting and SSO setting at User Management).
Defining the Timeout in J2EE Session
1. Open file web.xml (path depends on the version of EP6.0. If it is based on NW04, then
..\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF
2. Enter a value in minutes under <session-timeout>. The value should roughly correspond to the length of a synchronization cycle. The default is 30 minutes.
After a successful login, it receives a SSO ticket which is valid for longer duration (generally 8 hrs, default which you can changed using "System Admin" as mentioned by Yoel.
Thanks,
Swapan

How to Check and Uncheck the JCheckBox in the JTable?

Dear Friends,
I created a Table using JTable and it consists first column is JCheckBox (JCheckBox is included in JTable by using TableCellRenderer) and two more columns with Id and Name. How to enable the check and uncheck the JCheckBox in the Table and how to get the row id or values of the rows where the CheckBox is checked?
Thanks in Advance.
Sathish kumar D

Read the API for JTable and follow the link to the tutorial on how to use tables, where you will find adequate guidance and examples.
db
edit And isn't this post on the same topic as your previous one? If so, please add a note that responses should be posted here and not on the other thread.
[http://forums.sun.com/thread.jspa?threadID=5353422]
Edited by: Darryl.Burke

Xp pc will not let me open the itunes store it faults and closes   the store or tutorials

Dell XP will not let me reach the store or act on any tutorials. It faults and closes the shortcut to Itunes. I have the most current Qtime and just downloaded the store program.. According to the apple test for the store everything is up and running but it will not connect.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 8300
iTunes 10.7.0.21
QuickTime 7.6
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012A81406E14F10
Current user is an administrator.
The current local date and time is 2012-09-22 10:32:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 6200
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {D8D4748F-C04C-4432-8FCC-D1A6BE80F0B3}
Description:             Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address:              192.168.1.2
Subnet Mask:          255.255.255.0
Default Gateway:     192.168.1.1
DHCP Enabled:       Yes
DHCP Server:          192.168.1.1
Lease Obtained:      Sat Sep 22 09:54:35 2012
Lease Expires:         Sun Sep 23 09:54:35 2012
DNS Servers:          192.168.1.1
Active Connection: LAN Connection
Connected:              Yes
Online:                     Yes
Using Modem:         No
Using LAN:              Yes
Using Proxy:            No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
iTunes has never successfully accessed the iTunes Store.

Add me to the list. I just bought mine & can't log onto the Apple Store to rent/purchase. I can on my MBP.
I've had the same thing happen when I tried to enter my YouTube username & password. It wouldn't accept it. I thought it was a fluke w/YouTube. Apparently not so.
So, I can't buy or rent movies/TV shows. Exactly why do I want this gadget?
How about an update on the Apple site that just recognizes these problems & promise a fix?
Message was edited by: Randy Green

Sales order - difference between Cancel and Close?

Hi All,
In Sales Order, is there any differences between Cancelling order and Closing order?
Thanks
Ric

Hi Ric...........
Difference between Cancel and close means if you raised Sales Order and your terms and condition is not accepted by your customer in such situation you have to cancel your order.
if you raised Sales Order and you did not agree with the payment terms sent by your customer in such situation you have to cancel your order.
if you raised Sales Order and put a date on which sale order should be canceled automatically if its not proceeded further from your customer in such situation you have to cancel your order.
But order cancellation must be before raising and type of target document.
Order close means if you have already raised target document against SO and now before completing order you have to stop the transactions or as per the validity of the Sales Contract then in such case you have to close the document......
Hope this is sufficient to know the difference between those....
Regards,
Rahul

How to check and maintain authorization objects

Hi Alll
Let me knowhow to check and maintain authorization objects in SU24 ECC 6.0.
Thanks
sathies

Hi Sathies,
the old check flags
U
Unmaintained
No indicator set. The check for corresponding authorization object is always executed. Field values are not displayed in the Profile Generator.
N
No check
Check disabled. Field values are not displayed in the Profile Generator. This indicator cannot be set for HR and Basis authorization objects.
C
Check
Check always executed. Field values are not displayed in the Profile Generator. For example: Printer authorizations.
CM
Check/maintain
Check always executed. Field values are displayed for changing in the Profile Generator (yellow light).
Have been divided now in
Checkindicator : Check/NoCheck
and
Proposal: Yes/No.
If defaults=yes, then you can modify them after clicking on the apropriate button.
Please refer to the online help for SU24 too.
Although the look of su24 has been changed significantly, the technique behind it is still the same.
Once you have pressed the 'edit'-button on the top left corner, additional editing options will appear in the right-top-frame.
b.rgds,
Bernhard

Applescript to open the Choose Folder dialog box and close the message after moving it

I've been trying to figure out how to get the same functionality as the Windows version of Outlook has so that the open message gets closed when it's moved to another folder.
It seems pretty simple to move a message to a pre-defined folder, but I can't find a way to open the Choose Folder dialog so I could choose the destination folder. I've looked through the dictionary, but couldn't find any direct way to activate the Choose Folder dialog. So I decided to use keystrokes for the job. Here's what I came up with:
on run {}
    tell application "Microsoft Outlook"
        try
            set theMessage to first item of (get current messages)
            set folderID to the folder of theMessage
        on error errMsg number errNum
            set dialogReply to display dialog "Please select one or more messages to file away before running this script." buttons {"Abort"} default button 1
            return
        end try
        -- open the Choose Folder dialog
        tell application "System Events" to keystroke "m" using {command down, shift down}
        repeat
            delay 2
            set currentID to the folder of theMessage
            if currentID is not folderID then exit repeat
        end repeat
        -- Close the active message
        tell application "System Events" to keystroke "w" using command down
    end tell
end run
This is my first attempt to do anything with AppleScript..
Now in addition to using keystrokes instead of Outlook built-in commands to open the Choose Folder dialog and to close the message, I also have another problem. Everytime I run the script from AppleScript Editor, everything runs fine, the message gets moved to the folder I choose and the message also gets closed. When I move the script to "~/Library/Application Support/Microsoft/Office/Outlook Script Menu Items" and start it from inside Outlook, Outlook gets stuck after opening the Choose Folder dialog and I have to force quit Outlook. I added some debuggin to the script and found out that the script keeps running, but I'm unable to select the folder from Outlook and cannot continue.
Anybody have an idea why this is happening?
Regard,
Kris

(For the record)
Unchecking "Submit crash reports" in the Firefox [[Options window - Advanced panel]] General tab simply toggles the default of the "Tell Mozilla about this crash so they can fix it" check box in the Mozilla Crash Reporter dialog (upon crash). It does not turn off the Crash Reporter itself.
Related bug report:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=577221 Bug 577221 - Firefox doesn't remember "submit crash report" check box]
The above information has been added to
http://kb.mozillazine.org/Breakpad#Can_I_disable_Crash_Reporter.3F

How to Post and Close the Period ?

Master,
I have Problem in <b><u>MB1C</u></b>, as Posting Period Problem .
Give me Solution.

Check the transactions :
MMRV : For this transaction, enter the company code. The t-code would give you information as to the period in which the posting can happen. Also, one can set if posting is to be allowed in the previous period.
MMPV: For this transaction, enter the company code and the period/year or the current date. The transaction would close the previous period and open the period with the current date. Though in case the period to be closed is older than one month, the subsequent periods need to be closed before the period with current date can be open.
Example: Say the last period open is 01st Oct 2006, the current date is 29th Jan 2007 and the period for the company is set as months. The steps to be followed are as follow:
1. close the period for the month of Nov.
2. Close the period for the month of Dec
3. lastly, open the period for the month of Jan 2007.
Regards,
Gauravjit.
Reward points if the solution is helpful

Open Slaes Order-How to check and close ?

Similar Messages

Maybe you are looking for