Open smtp and web ports

Hi everyone
I recently bought an ISA 550 which works finde execpt the following:
I want to port forward request like SMTP, DNS and Web from my public IP 62.2.208.170 to an internal IP 192.168.1.41 so my Servers are reachable from the internet
So i create a port forwarding rule see example below for http Traffic but this dosen't work why?
also the Rule is automatically created see below
What do i wrong?
Thanks for your help

Hello together
Now it works (don't ask me why) but it seems that you have to define (see below) a Port Forwarding, including an ACL and a Advancend Rule
Advanced NAT Rule:
Port Forwarding Rule
Firewall ACL Rule:
regards
E.Altherr

Similar Messages

Unable to open reports and web analysis document in workspace

After installing reports and analysis 9.3.1, when I am trying to preview a test report on web or as a pdf preview I am getting these kind of errors.
<BR><BR>
Required application module analyzer.reportview is not configured. Please contact your administrator.
<BR><BR>
When I click OK on this it says communication error which says <BR><BR>
"http://hyprepdev.acml.com:19000/WebAnalysis/conf/AnalyzerConfig.xml?LOCALE_LANGUAGE=en <H1>SRVE0255E: A WebGroup/Virtual Host to handle /WebAnalysis/conf/AnalyzerConfig.xml has not been defined.</H1><BR><H3>SRVE0255E: A WebGroup/Virtual Host to handle hyprepdev.acml.com:19000 has not been defined.</H3><BR><I>IBM WebSphere Application Server</I>"
<BR><BR><BR><BR>
Similarly when I try to open as pdf preview I am getting the same error.<BR>
Kindly advice.

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

Open Directory and Web service groups disabled

Hi,
I am trying to configure Podcast Producer on Leopard Server (got a 10.5.1). the DNS seems to be working fine; same as open direction (ODM) with Kerberos. However, when I created a group in WorkGroup Manager and Directory it is still disabled in the web page (using the domain name). I don't understand why. Could it be a permission problem? Could it be the apache configuration?
Thanks in advance for any help

Hi,
I am trying to configure Podcast Producer on Leopard Server (got a 10.5.1). the DNS seems to be working fine; same as open direction (ODM) with Kerberos. However, when I created a group in WorkGroup Manager and Directory it is still disabled in the web page (using the domain name). I don't understand why. Could it be a permission problem? Could it be the apache configuration?
Thanks in advance for any help

Freeserve/Orange POP3/SMTP and Web interface not recognising credentials

Is there an outage on the email?I was getting my mail fine a couple of hours ago, but now I'm getting the message from my mail client (current Thunderbird) "Sending of password for user arkhamroad.fsnet.co.uk did not succeed. Mail server pop.orangehome.co.uk responded: Invalid login or password" and on the website (https://web.orange.co.uk/id/signin.php?rm=StandardSubmit) Sorry, the details you entered weren't recognised. Please try again.
Have you changed your password recently? Please note that it can take up to four hours for your password to be changed on our systems, so you may need to try again later. The password change portal doesn't recognise my account details either Since I've not changed my p-word, I'm stumped.

rodonn wrote:
My wife, who also has an FSNET acct isn't having a problem.
Curiouser & Curiouser! Nor is my wife. I even added my email a/c in her mail client under her Windows user with exactly the same server settings except the POP3 Account Name and it still didn't work.
The only diff between our email accounts is mine is freeserve.co.uk and hers is orangehome.co.uk. However hers was acquired originally as a PAYG dial-up a/c. Was your wife's? My email came from with my ISP service. I have since changed my email pwd to be different from my BB pwd, which cannot be changed. I did wonder whether the POP3 server has reverted to my original = BB pwd but that still doesn't work.
More curiosities: As you say sending still works, and is received at recipient. I nowadays send on SMTP 587 which is authenticated as the same as the incoming mail server. So the SMTP accepts the pwd that POP3 rejects!

BEFW11S4 UDP AND TCP PORT opening

How do i open UDP AND TCP ports specifically TCP ports: 80, 6667, 28910, 29900, 29920
UDP ports: 4321, 27900 Its for a networkable game i need to open these ports to play it.

Ok But when i try disabling the numbers in the forwarding field i run out of spaces in the field to be able to disable them Is there an advanced firewall settings that i dont know about? I put in all of the range forwarding and put the range forwarding start for example 80 originally (TCP ports: 80, 6667, 28910, 29900, 29920
UDP ports: 4321, 27900) The ones i try to disable i run out of fields to disable them in the forwarding for example there are 10 slots for disabling and Im trying to disable them on two numbers 192.168.1.101. and 192.168.1.100 So i need to disable them for both ip numbers I got 10 fields to enter it into them and 10 x 2 is more than the numbers..... You get me?? and on top of that i dont know if what i did was enough Linksys doesnt want to help me without paying 30 dollars so im just thinking i should buy a new router....... i mean they charge 39 dollars for a new router and they want me to pay 39 dollars for tech support it just doesnt make any sense........

Settings of Mail Host and Mail Port in transaction: SCOT for the node: SMTP

Hi,
Could anyone please explain me the significance of Mail Host and Mail Port for the SMTP node in transaction: SCOT.
It says Mail Server to which outbound mails can be passed.
Can i specify my GMAIL ID in the field Mail Host and left blank the Mail Port so that the mail can be sent to my GMAIL Account.
Please let me know if further details are required from my side.
Thanks & Regards,
Goutham.

the below are the step to configure your mail server of anhy type ....
Steps to perform in SAP:
1. Transaction SM59 Setup an RFC Destination for the execution of the email transfer
a. Name: Internet Mail Gateway
b. Connection Type: T
c. Description: Internet Mail Gateway
d. Activation Type: Start
e. Explicit host:
i. Program: c:<dir>mlunxsnd (I used c:sapmail)
ii. Target Host: <Server_Name>
f. (MENU) Destination -> Gateway Options
i. Gateway Host: < Server_Name>
ii. Gateway Service: sapgw00
iii.<OK>
g. SAVE
2. Transaction SCOT Setup a default domain for your system
a. (MENU) Settings -> Default Domain
i. <Default_domain> (i.e. [email protected], Domain company.com)
ii. This setting gives a default to any user who does not have their email address maintained in the system. <user_name>@<default_domain>
3. Transaction SCOT Setup of the Node for queuing the emails before transfer to Exchange
a. Click on INT -> Create button
b. Give Default name (I choose EXCHG, as this was the node type for the Exchange Connector)
c. Give Description
d. Assign the RFC Destination previously created (Internet Mail Gateway)
e. Node: Internet
f. Address area: *
g. Supported address Types:
i. All formats except the fllw
ii. ALI, OBJ, OTF, SCR, URL
h. Choose Ok and Save
4. Transaction SCOT Setup a job to execute the send process on the queue.
a. (MENU) View -> Jobs
i. Select the Create Button
ii. Job Name: SAPConnect
iii. Put Cursor on Variant: SAP&CONNECTINT *As you created an INT Node, you need to run the variant for all of the INT sending. You can select SAP&CONNECTALL, but if you are not using any other node types, you can run with SAP&CONNECTINT.
iv. Select: Schedule Job Button
v. Schedule job for a periodic run approx. every 15 minutes
vi. Save
5. Transaction SU01 Maintain each users email address
a. Select users who require the ability to email from SAP
b. Under the address tab, in SU01, maintain their email address.
Steps to perform on the SAP system (operating System):
1. Create a directory for the SAP programs.
a. Create directory c:sapmail (Directory can be anything)
b. Unpack the ML*.CAR file from SAPs website
c. Alternatively, copy the ML* files from /usr/sap/../run/ directory. This ensures version compatibility with your SAP instance.
2. Create the directories for your sendmail program
a. http://emailrelay.sourceforge.net/
i. Download the emailrelay program
b. Create directory c:winntspoolemailrelay
i. Unpack the contents of the emailrelay zip into this directory
c. create Directory c:reskit (Used to make the emailrelay program run as a service
i. http://www.tacktech.com/display.cfm?ttid=197
1. www.tacktech.com had some great instructions for creating a service on the NT side. (Thank you Tacktech)
2. Use SRVANY to create the services, as documented below.
d. Open command prompt
e. Follow instructions for creating a service
i. cd reskit
ii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Engine>" c:reskitsrvany.exe
1. This service is the engine
iii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Send_Process>" c:reskitsrvany.exe
1. This service is the send process
iv. Modify the registry to represent the two new services
v. View instructions for Parameters and Application Creation under the services in the registry
vi. Command lines should be as follows:
1. <SERVICE_NAME_Engine> - c:winntspoolemailrelayemailrelay.exe --as-server --no-daemon
2. <SERVICE_NAME_Send_Process> - c:winntspoolemailrelayemailrelay.exe --no-daemon -hidden --forward-to (your_mailhost):SMTP --poll 5
vii. Start the services using service mgr.
f. cmd prompt cd sapmail
g. mlsomadm c:sapmailmailgw.ini (see below)
3. Create a mailgw.ini file (This file is used by the mlunxsnd program)
a. Open a command prompt
b. Change to the directory c:sapmail
c. Run command mlsomadm c:sapmailmailgw.ini
i. This creates the parameter file for the send process.
d. MAILGW.INI entries
i. System Name: [SID]
ii. Client: [000]
iii. Username: [MAILADM] no user required, as this is not being used for your connection
iv. Password: [*******] leave empty
v. Language: [E]
vi. Load Balancing: [N]
vii. Hostname: [app_server_name]
viii. System Number: [00]
ix. Gateway Hostname: [ ] you do not have to specify, it will use the default
x. Gateway Service: [ ] default will be used
xi. Use SAP Router: [N]
xii. Set Bcc Flag on Env..: [N]
xiii. Trace Level <In..>: 1
xiv. Trace file <In..> c:sapmailtracein.txt - Can be where ever you want
xv. Sendmail Command: c:winntspoolemailrelaysubmit -from <SENDER_ADDRESS>
xvi. A warning may come up that says to not use the t flag. IGNORE
xvii. Codepage: [ISO-8859-1]
xviii. Generate Notificat..: [N]
xix. Trace Level <Out..: [1]
xx. Trace File <Out..>: c:sapmailtraceout.txt - Can be where ever you want
xxi. Update File c:sapmailmailgw.ini [Y]
Steps to perform on the Microsoft Exchange System
1. Allow the SAP systems to enter on port 25 to send mails using Microsoft Exchange (SMTP Communication)
reward points ....
Girish

Web-ports variable, ipsmc 2.2 and sensors 5.1

CiscoWorks ipsmc 2.2 adds a space between the ports when you update the variables for web-ports. ie 80-80,8010-8010 is changed to 80-80,space8010-8010.
I think that this is an error. If you change the port list to include a new port, when you deploy the configuration you receive the following error message at the console logs.
Starting to Deploy...
An EditConfigDelta request sent for all the changed components.
** ECD result for analysisEngine: no error.
** ECD result for eventActionRules: no error.
** ECD result for signatureDefinition: Error validateError: / -- /_root_/variables/[variable-name=WEBPORTS]/web-ports/ -- The integer range, 80-803128-31288000-80008010-80108080-80808888-888824326-24326, format is invalid
Sensor has accepted all/some current config.
Could anyone tell me if this is a recognized bug and if there is some known workaround in place to fix it?

I currently have a TAC case open for the same problem. TAC representative for my case identified it as bug CSCsb06290. It looks to me that the comma is not being generated. Through IPS MC, set the WEBPORTS variable to 80, 88. Push the config, it will show no errors. However, check it on the sensor through the CLI and you will see it has pushed the variable as only port 8088.
mysensor# conf t
mysensor(config)# service signature-definition sig0
mysensor(config-sig)# show settings
variables (min: 0, max: 256, current: 1)
variable-name: WEBPORTS
web-ports: 8088 default: 80-80,3128-3128,8000-8000,8010-8010,8080-8080,8888-8888,24326-24326

"This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint 2010 and Publishing Approval workflow.

I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
2010 and Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
Versioning Settings.
Error
This is quiet urgent issue . Any help would be really helpful.. Thanks..

Hi Marlene,
Thank you very much for your suggestions.
But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
As it works in other environment, I tried figuring out the possible differences which can lead to this error.
Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
Regards,
Vineeth

Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

Once the user has entered the URL they want to add to the form. You can use the loadXML function to implement some special text in a label...
var linkValue = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><exData contentType=\"text/html\" xmlns=\"http://www.xfa.org/schema/xfa-template/2.8/\"><body xmlns=\"http://www.w3.org/1999/xhtml\" xmlns:xfa=\"http://www.xfa.org/schema/xfa-data/1.0/\" xfa:APIVersion=\"Acroform:2.7.0.0\" xfa:spec=\"2.1\"><p style=\"font-weight:bold;text-decoration:none;letter-spacing:0in\">The new link the user have entered is:<a href=\"" + textfield.rawValue + "\">textfield.rawValue</a></p></body></exData>";
this.resolveNode("lblURL").value.exData.loadXML(linkValue, 1, 1);

After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up.

I am using MacBook Air with Yosemite OS. After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up. Could you please give me suggestions on how to fix this problem? Thank you

That's a bit vague, but you may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How do I Keep the "zoom" size setting the same each time I open Safari and from web page to web page?

I have a 27" iMac when I open Safari the web page is only 1/3 the size of the full screen Safari window. I know how to ZOOM in on the web page! My question is, How do I keep this ZOOM setting for all web pages and each time I open Safari up?

Sorry, but that's not possible.
An alternative might be to use Zoom in System Preferences > Accessibility
Or try a different screen resolutioin in System Preferences > Displays > Scaled

Smtp and pop3 host and port name of gmail server?????

can any body give me smtp and pop3 host and port name of gmail server?????to send a mail......

Just do a new initial context and lookup the datasource, in case you need other info like host name and port you can use MBEans like:
          InitialContext ctx = null;
               // fetch managed server name by accessing the
               // RuntimeServerMBean using the
               // MBeanServer interface
               ctx = new InitialContext();
               MBeanServer server = (MBeanServer) ctx
                         .lookup("java:comp/env/jmx/runtime");
               ObjectName service = new ObjectName(
                         "com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean");
               managedServerName = (String) server.getAttribute(service,
                         "ServerName");

Whole CS6 Design and Web Premium package opens and loads to just close again.

When I installed it onto my laptop in the first place, the package worked and would let me use it.
After a while it began to crash on me, complaining about my graphics card crashing and then proceeding to close itself, but it would still open and work until one day, photoshop (the program I use the most as I draw in it) opened to just immediately close after fully loading with no warning or message.
I have attempted reinstalling and have also done updates, but neither of these things helped at all.
This happens to all of the programs of my Design and Web Premium package and I would love to know a way to get them working again so I may also continue doing school work outside of when I can gain access to the school computers as well as it would give me a program to draw in again.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

CS6 Design and Web Premium: can't open DW as it tells me I'm not connected to the internet

I downloaded CS6 Design and Web Premium 30 day trial, but can't open Dream Weaver as it tells me I need to install a java runtime to do this but that I can't because I'm (apparently) not connected to the internet. I am connected however, and when I try the network diagnostics it also confirms that I'm connected to the WiFi.
Help?

Mac OS X 10.7.4
Date: Tue, 12 Jun 2012 17:24:30 -0600
From: [email protected]
To: [email protected]
Subject: CS6 Design and Web Premium: can't open DW as it tells me I'm not connected to the internet
    Re: CS6 Design and Web Premium: can't open DW as it tells me I'm not connected to the internet
    created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Which operating system are you using?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4487524#4487524
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4487524#4487524. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When I try to open Safari, I get NCSW21 and that server can't be found. This happens everytime. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Only with the Safari page. Can anybody help.

Can't open Safari. I get "Can't find server". I get NCSW21 in my address bar. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Need help. Thanks

Hi Professor66,
I have a couple of suggestions for you regarding this issue. Here are two links to users who have posted similar questions to yours and have found their answers in the responses to their posts:
Safari hangs when loading web pages. | Apple Support Communities
https://discussions.apple.com/thread/3784708
Safari loading blank pages | Apple Support Communities
https://discussions.apple.com/thread/3899912
I would suggest that you first follow the troubleshooting that the OP did in the second link, which is to test in a new user account to see if the behavior is consistent. If it is, you may need to address the issue at a software level by re-installing Safari. More information on this process can be found in the following article:
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Open smtp and web ports

Similar Messages

Maybe you are looking for