Open specific Illustrator art board

Is there a way in Photoshop’s open preferences to specifically open a certain art board (i.e. art board 2, 5, etc.)?

The DOM doesn't have a page setting in EPSOpenOptions but you can open a specific artboard( page ) using Action Manager.

Similar Messages

When I save a PDF from Illustrator the art board is cropped or has moved. How can i stop this from h

When I save a PDF from Illustrator the art board is cropped or has moved. How can i stop this from happening?

What is your operating system?
Can you open that PDF with a text editor and check that the first four characters are '%PDF'.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

Exporting Illustrator Symbols to a New Art Board

Anyone know of any scripts that will:
Take Adobe Illustrator Symbols in your current document's symbol library and...
Place them on an art board in either the same document or a new one?
The symbols should retain their original sizes, with an option to resize if needed
The symbols should be placed with adequate spacing on the new art board
The symbols should be put in their own layers when placed on the new art board
Would be great if the symbol names could be placed beneath each symbol for reference
I've seen something very, very close here, which already does 1, 3, and 4: http://forums.adobe.com/message/3613498. If you can modify it to do some of the following above, that would be splendid.
But the script requires the user to place in a value for sizing the symbols before exporting them to the artboard. I like this as an option, but would be better if it would allow you to retain orginal sizes.
Basically, this is something that could help to create a starter UI Kit from symbols.
Thanks - Jux

Jux, did you find a solution to your question, I'm trying to achieve the same result
I have a graphic moch-up of an app design I have working on in illustrator. All the graphic elements I have created have been captured as symbols. I would like to export all those symbols out to PNG format if posable, without resizing.
Just like you I also found the script http://forums.adobe.com/message/3613498 but i find this option is not completely suitable as the script is asking me to nominate a size.
After extracting all the symbols to layers, then i would use another script Export Illustrator Layers and/or Artboards as PNGs and PDFs | Matthew Ericson - ericson.net output layer or art board to PNG.
Im also looking around for a script that would export all symbols to layers retaining the names of the symbols to layers or art board.
Thanks, Pete

How to rotate a art board in a illustrator using adobe extended javascript

How to rotate a art board in a illustrator using adobe extended javascript
how to create mirror image of each textframe content of artboard

1. there's no "Rotate" function, you have to rotate all your objects and then "resize" your artboard to simulate rotation.
2. there's no "Reflect" function either, to make "mirror" images, use the ScaleMatrix function, see this post
Reflect whole objects

Illustrator CC, 2014, default art board name

In Illustrator CC, 2014, How do you remove a custom art board name, and reset the default to start back at one? It used to be you would just remove the name, but that no longer works. When I create a new art board in a document that has been used as a template, it starts at "Artboard 239." How do I get that back to 1 without starting a new document?

Davey,
You could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Or you could have a look at items 1) and 11) in Other options (follow the link with that name).

Feature Request - Illustrator - Multi-select and rearrange a set of art boards at once.

I've been hoping for align and multiple select ability for art boards for several years. The issue is that when you're using a large number of art boards arranged in a grid for a large app design project or similar, rearranging art boards is a huge time waster. Repositioning is difficult as there is no way to multi-select or drag several at a time. Art boards also get mis-aligned easily, so being able to use existing align tools for art boards themselves would be an expected, easy to grasp, evolution. (and much faster than doing them one at a time) I often have large illustrator files with a spread of assets ready for export. Being able to make these files orderly and easily viewed by others is crucial.
Also, numbering...
Usually what happens is that we'll drag-duplicate a screen to alter, but they end up with an art board numbers that are out of sequence in the design, making the export out of order as well. It would be awesome to directly click to alter an art board's assigned number.

I have a related FR, so I decided to integrate it with the above, which I also like. The FR is for: Smarter Finds with and/or logic and Smarter Smart collections with And/Or logic. For example, I want to find (or to make a smart collection of) all the photos that are in a folder which meet these criteria:
Their file name contains the word "Cuba" AND they have modifications (in the develop module)
OR
Their file name contains the word "Cuba" AND the file extension is .psd
This is because most photos in this folder are NEF, some of those have been developed in LR, and some have been exported to Photoshop to be worked on. It's frustrating not being able to make this preselection to find ALL the photos I've worked on. Anyone agree we need and/or/not/but logic and to be able to combine criteria in a find request?

I made a brochure and saved it. But now it doesn't want to open anymore. It says: " Can't open the illustration. The illustration contains an incomplete or garbled description. X +1 / FreeUndo, 0, /frame index, 4, /story index, /art: , x= , x+, I made a b

I made a brochure and saved it. But now it doesn't want to open anymore. It says: Can't open the illustration. The illustration contains an incomplete or garbled description. X +1 / FreeUndo, 0, /frame index, 4, /story index, /art: , x= , x+
Can anyone please help me?
Thanks
- Zabanya

Zabanya,
One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

How to view individual art board in Bridge CS4?

Hi.
Can somebody tell me how to configure the Adobe Bridge CS4 so that it shows/views/displays individual art boards (that I can scroll thru) and NOT the whole *.ai file (which contains ALL the art boards)?
I want to preview the individual art boards as a larger image, and when they all appear together in the *.ai file, they appear smaller.
At the bottom of this page:
http://www.adobe.com/designcenter/illustrator/articles/lrvid4016_ai.html
it says;
"To view documents, open Adobe Bridge and select an Illustrator document from the Content panel. A larger view of the document appears in the Preview panel located to the right of the Content panel. When viewing an Illustrator file with multiple artboards, click the right-facing arrow below the preview to display each of the artboards."
I do not have this arrow, so therefore no option. On my bridge, all artboards appear together. How do I separate them and get the arrow he is talking about?
TIA.

Interesting, looks like you also need to save the file with Create PDF Compatible File checked in the Illustrator options dialog when saving - the sample files were saved without PDF compatibility, so no individual artboard preview.
I resaved the sample file In the Cradle of the Deep with Create PDF Compatible File checked, and it shows the artboard previews individually.

ERROR! can't open the illustration. the illustration contains an illegal operand. Offending operator '((((((((((((((((((((((( 1Gm

Hello, good people. Please help!
I am working on a project that consists of one .ai file that contains 27, letter sized art boards.
I am using Adobe cs5-Illustrator on a macbook pro.
I have opened and closed and save this file many, many times—I have been working on this for the last 2+weeks.
Today, when I tried to open the file I received an error message that read: "can't open the illustration. the illustration contains an illegal operand. Offending operator '((((((((((((((((((((((( 1Gm
A screen shot of the entire message is below. Can anyone please help me to ward of this "offending operator?"
Thank you in advance.

AAhlene,
It is strange that the offending operation is not shown in context within the message.
Are you saving to your own harddisk( see below)?
One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html
To have a network actually work may require some work.
If you transfer by external means it is always safest to zip/compress the file to avoid corruption.

Multiple art boards disappear on reopening doc

Using a Dell PC, Illustrator CS4, Windows XP Pro.
I had a one art board document. To create three additional art boards, I ALT/SHIFT & dragged the initial board. After finishing my work, I closed the document. On reopening the doc, I find all of my work still where it was, with one art board placed off center in the middle of the work. I am able to use the art board tool to place art boards under the work, but when I save, close, and then reopen, those boards have disappeared again. This didn't happen with previous documents I've done using multiple art boards. Any idea of what's going on?
Thanks,
GS

Are you mistakenly saving to an older version of Illustrator?
If you set up multiple Artboard in CS4, then save the file as a CS3 file, the additional artboards will be removed because CS3 doesn't support multiple artboards.
When you open old files, they retain their version number when saving.

Art board changes from CS3 to CC?

We are updating our workflow, and with it, software. Going from CS3 to the creative cloud. For years we have stuck to CS3 as our downstream customers were slow to update and it was beneficial to provide the product in an older format usable to the broadest user base. Now we are upgrading to CC and I'm experiencing difficulty translating older Illustrator documents to Creative Cloud.
My understanding of the Art board is that it defines the live matter area of the artwork. Along with the Zero Zero point, this would serve as the starting point for image setters. When I preview the translated documents, the art board and the coordinates change. when I distill an eps into a pdf, i get a totally different result than when I save as a PDF within the program. Ive also experinced the zero zero point changing simply by opening the document again. This is making production very difficult as it seems like its not stable.
Anyone experience this in CC and is there a fix for it? See screen grabs below:
This is the way the document appears in Illustrator, notice the zero zero point.
When the document is distilled, the art board shrinks:

LTU,
how do I fix it so its consistent?
I believethe following ways still work:
A) Install and run the script in the OP of this thread,http://forums.adobe.com/thread/890507?tstart=30
or
B) Manually change the relevant preference settings as follows:
0) Close down Illy (you can only change the preference file with Illy closed);
1) Find and open the AIPrefs (Win speak) or Adobe Illustrator Prefs (Mac speak) file withe a text editor like Notepad or TextEdit; the preference file is a (hidden) file in the (hidden) folder Adobe Illustrator CS5 Settings
2): Find and change the following two bits of code:
/isRulerOriginTopLeft 1 >>> /isRulerOriginTopLeft 0 (change 1 to 0)
/isRulerIn4thQuad 1 >>> /isRulerIn4thQuad 0 (change 1 to 0)
This is a global change so you only have to do it once (just as you can undo it once).
You may find the folder as described in <a href="http://www.bugge.com/Family-and-friends/Illy/illy.html">Move the folder</a>.
Also, it doesn't explain the discrepancy between Distiller and saving as a PDF within CC.
I have no clue about that one, I am afraid. I hope someone else has.
Someone?

.pdf file not opening in Illustrator CS5

All of a sudden, I cannot get ,pdf files to open in Illustrator CS5. what would cause this?
Thanks

Jeremy,
Or you may go further down the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Edit: Hi Steve. Whatever was white is less so now.

How can i use eyedropper between two different art board.

Hi
How can i apply the same color for the images in two different art boards with eyedropper.
I am trying to apply the same color from the image in one art board to another image in another art board.
Can any one help me please. Thanks
Steve
I am using Mac

apresslink,
Presuming you are unable to use the Eyedropper Tool normally, in other words keep the target object selected while you pick up the colour, by having the Artboards open in adjacent windows to ClickDrag between (I am still with 10 which may explain at least part of my ignorance for which I apologize):
Until someone presents a smarter solution, you may cheat and create a carrier object beside the source object, drop the colour in that, cut and paste it to be beside the target object, and drop the colour there. With multiple colours to drop multiple times, you may create a palette to hold them, to use just like a painter working on several canvases at the same time. Or you could paste diminshed copies of the source objects.

I need to write a Java script to make my Art board bigger by 1 (one) inch on the Width and Length, Regardless of the Content?

Hi,
I am currently using "Visible bounds" (java script)to add 1 inch to the width and to the Length of my Art board, but when i make a clipping mask it actually reads the hidden content from the Clipping mask and makes conforms my art board to that particular shape. Am using Adobe illustrator cs6 Here is My Code:
var myDocs = app.documents;
var i = 0;
for (i = myDocs.length-1 ; i >= 0; i--)
    var doc = myDocs[i];
    app.activeDocument= doc;
    var myVisibleBounds = doc.visibleBounds; //Rect, which is an array;
    myVisibleBounds[0] -= 36;
    myVisibleBounds[1] += 36;
    myVisibleBounds[2] += 36;
    myVisibleBounds[3] -= 36;
    doc.artboards[0].artboardRect = myVisibleBounds;
All i Want is to add 1 inch to my width and length and this does it but if i have a clipping mask it will pick up the bounding box i guess? and it will conform it to the shape... any help please... Try my code and you will see that it does add 1 inch but now make you artboard lest say 12" x 12" and make a shape bigger than the art board and you will see how it adds 1 inch to the art board based on that shape... now if you make a clipping mask to fit that shape in the 12" x 12" art board you will still get 1 inch bigger than the shape thats being clipped ...

yes, visible bounds is reading the non-visible masked objects too.
you're going to have to do it the hard way, loop through all your objects to get your bounds manually, and while you're at it, test for clipping masks and use the masking path instead.

Open specific Illustrator art board

Similar Messages

Maybe you are looking for