Open target quantity in ME2N
Hello,
what is open target quantity in ME2n report it is always 0?
Regards
Senthilnambi
Hi
During the report Run its always blank and what ever you put and then execute it will give the results as per your input.
Similar Messages
-
Check on open target quantity (contract/agreement)
Hi
We would like a check on open target quantity on the contracts assigned to a pur. req. when this is converted (ME58). If the open target quantity larger than pur. req. quantity then we want a new pur req. to be created for the next contract in the source list.
Do any of you know if there is something standard we can use there?
thanks!Hi
Thanks for your answers!
I can't use Quota arrangement, because I wish to use up the first contract from supplier 1 and then switch to contract for supplier 2. I do not wish to supply from both at the same time.
Regarding the meassage about that contract is exceed will not work either because contracts are made by different organization.
We want some automatic in case of If the open target quantity larger than pur. req. quantity that will recalculate the pur. req. to the remaining quatity of the contract and create new pur. req. to the next contract.
I hoped that there was a standard solutionf for that.
br. sune -
Open Target Quantity and Open Target Value in Contract
Hi,
When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value' of contract.
Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
Thanks,
SiddhiHi,
Thank you for the reply.
I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
Can anybody please help me with getting this logic?
Thanks,
Siddhi -
Open Target Quantity of a Conrtact - ME21N
How can we see the Open Target Quantity in ME21N while creating a PO in reference to a Contract?
In ME21 while creating in reference to a Contract , system clearly shows what is the Open Target Quantity.
Is there a way in ME21N? I tried changing the layouts but it dint work.
Will reward points.
Thanks
Reevesfrom OSS note 329437 - ME21N: Functions not available:
You create a purchase order with reference to the contract. In the old SAP ordering transaction (Transaction ME21), the "open target quantity" was displayed when contract items were transferred. This function no longer exists in the new SAP ordering transaction (Transaction ME21N). -
Viewing Target Quantity in Scheduling Agreement Schedule Lines
Hi Experts,
Can I view the Target Quantity in the Scheduling Agreement Line Item in the Schedule Lines Screen?
Thanks for all suggestionsAfter maintaining Schedule lines in ME38,click on the line and details button on the top of the screen,Here you will get Target
quantity and open Target quantity. -
Open target qty in quantity contract
Hi Experts,
I would like to create a report to display what is the open target qty of the contract. is there any report where we can see the target qty and open target qty. in which table I can find the open target quatity of the contract?
Thanks
SriHi,
If you getting desired results from standard reports then its fine, otherwise you need to develop your own report by using Table
EKAB which contains all the contract release order i.e P.O for a particular contract.
So by using this EKAB table you can easily develop your report -
Po list showing the total amount with advances given & open GR quantity
Hi Gurus,
My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned.
I hv tried in ME80FN, ME2N, ME2L ME2M..etc and all other reports but the system is showing the same with the line items. Kindly advise.
Regds
Prashant BijutkarPrashant,
All three informations will not be available in one report(gross total amount not with the line items and the advances rendered to them & its open GR quantity against total qunatity mentioned).
You have to dovelop this report. please take help from technical consultant.
One more thing the open GR quantity will always at PO line item level not at header level.
Regards,
Manish -
Open Order Quantity in Contracts
Dear Gurus
I am trying to create a report which will show the Open Order quantity of SD Contracts.
This being the figure of the target quantity less the called off quantity.
Please advise on the best method of getting this information, I can see the cumulative order total in the contracts but this is held in a structure (RV45a- KWMENG) and I am struggling to get this information into a report
Many thanks
TonyHi Tony,
To the best of my knowledge you will not be able to read value into your report from RV45A- KWMENG. To get this value you need to first fetch the list of subsequent SD documents from VBFA table. Later you need check status of those documents both at header and item/s level using VBUK and VBUP. If you find the open items for documents you need to sum up all those quantities to arrive at a open quantity for the contract using tables VBAK and VBAP
Please keep in mind performance issues which may arrive in this process as it deals with linking of 5 tables. You may need additional database index for the table VBAK (Thanks to check on this point).
Below information may be useful to activate the index:
To activate the index, proceed as follows:
1. Call transaction SE11 and enter the database table VBAK. Choose "Display" and then select "Goto -> Indexes" (Ctrl+F5) in the menu.
2. Double-click the entry I01.
3. Change the option to "Index on all database systems".
4. Activate the index (Ctrl+F3).
5. You must collect the database statistics for the index so that the optimizer can recognize the index (transaction DB20).
Hope this helps you.
Regards,
Praveen -
Dear All,
Can anyone tell me in which Table and filed i will get the OPEN ORDER QUANTITY
Regards
TaraTara,
we apologize, if you want ffor PO then you can check the table EKPO, EKKO, and EKBE,and for delivery schedules use the table EKET...
u can also check report ME2N for the same.
Thanks,
Raja -
Open Order quantity in Release order of Contracts
Hi all,
We are developing new PO format for Release Order ( Contract) where in we want to print the Open order quantity & Open order value along with Contract number.
What is the best logic for Open order quantity, where in it has consider all the previous release order quantities minus the target quantity in contract.
Open order quantity = target quantity in contract - all previously release order quantities.
Thanks in advance.
MM
MMhai sajid,
As u said,
open order quantity = total quantity in contract - total quantity released against that contract ( Through release orders )
it is right,
with regards
srinivas -
MRP create more Schedule Lines than target quantity
We already follow the OSS note 83343, we create a Schedule agreeement and validity date is the same as the Source List and Quota arrangement, also the Target Quanity is the same in the quota arrangement in the maximun quantity and Maximun release qty fields.
After maintaining that data, we run the MRP as follow:
Processing key NETCH Net change for total horizon
Create purchase req. 2 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 1 Adapt planning data (normal mode)
Scheduling 1 Basic dates will be determined for plann
After that, still in teh schedule agreement was created more schedule lines that the quantoty is bigger that the target quantity in the sched Agreement.
What else we miss??Thanks for your not help.
That I can investigate is the quota arrenagement is incorrect but for some reason the QA is not working. -
Copy of target quantity from Contract to Sales Order
Hi all,
The desired document flow is Quotation --> Contract --> Order.
Thru copy control the target quantity from quotation flows in to the contract, but the target quantity is not copied into the sales order from the contract.
The document type with the item category for the document types are as follows :
Quot. Doc type ZQT (Copy of AV) and item category AVN (Standard item)
Contr Doc type EWK2 (Copy of WK2) and item category WVN (Maint contr item)
Order Doc type ZSD (Service Order) and item cateogry WVN(Maint Contr item).
Please suggest a solution.
Regards,
Udaynath.dear udaynath
check copy control settings
Copy Control is used ,
Copy control is basically used to transfer information from one document to another. In other words it helps in connecting and sharing information between two documents in a cycle like from example between quotation and a sales order. The following controls available at copy control configuration -
You can store copying requirements at every level in copying control. Copying requirements contain the specific requirements for each business process and can be stored at every level. The reference document can only be created if all these requirements have been met.
Examples of copying requirements that have been included in SAP standard system are
a. Header level copying requirement 001 checks, for instance, whether the sold to party in the source and the target document are the same
b. Item level copying requirement 301 checks, for instance, whether the item that is to be used as a copy has a reason for rejection or completed status.
c. Schedule line level copying requirements 501 ensures that only schedule lines with an open quantity greater than zero are copied.
To control the copying procedure, at each level you create:
a. Data transfer routines these routines control how fields are copied from the preceding document.
b. Copying requirements you define requirements that are checked when you create a document with reference. If these requirements are not met in any particular case, the system issues a warning or error message and if necessary terminates processing.
c. Switches there are switches for setting specific controls for each transaction. for example, you can activate or deactivate the transfer of item numbers from the preceding document at the header level for sales documents..
possible scenarios:
1- sales document - sales doc' VTAA
eg: inquiry - quotation
inquiry - order
quotation - order
quantity contract - order
2- sales doc - delivery doc - VTLA
eg: sales order - deliver ( OR- LF)
returns order - return delivery
3- sales doc - billing doc - VTFA
eg;Cash sales - cash sales billing
credit memo req - credit memo
4- delivery - billing - VTLF
eg: standard del - invoice ( LF- F2)
5-billing - sales VTAF
eg: standard invoice - credit memo req
Invoice - Invoice correction req
6- Billing - Billing VTFF
eg: Invoice - credit memo
flow will be done , only if their copying requirement condition meets
like header sold to party is same.
it has data transfer routines DataT-in which it has routines by which system transfers what data has to be copied.
Update document flow-- this has to be mark if we want the system record the previous document numbers in track.
rewards if it helps
siva -
Open Order Quantity for open sales orders
Is there a standard SAP Report that gives the open order quantity for every open sales order. "Open" is defined as any order quantity that has not shipped. Delivery creation is not the same as shipment. VA05 Report does not contain enough information to calculate the open order quantity for an ERP-based backlog report.
Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez -
Hi
From the business content, in the update rule: 2LIS_02_SCL -> 0PUR_DS03. there is a routine for the PO open quantity 0BO_QTY as follows:
RESULT = COMM_STRUCTURE-cpquaou * COMM_STRUCTURE-numerator /
COMM_STRUCTURE-denomintr.
cpquaou is mapped to BWMNG which is the PO quantity "not the OPEN PO quantity".
1. So how come this routine calculates the open quantity?
2. I have to report parital open quantity as soon we have confirmed quantities, so I am trying to use 2LIS_02_SCN as a datasource and map it to 0PUR_DS03. Then I will map 0OPNQTY -> 0BO_QTY. Is my logic valid??
3. To resolve the first issue I am thinking to enhance my datasource 2LIS_02_SCL with two fields:
- MENGE (Scheduled Qty.)
- WEMNG (GR Qty.)
then i will change the update rule routine as: Open Qty. = MENGE - WEMNG.
Do you think that approach is ok?
Thanks in Advance
Edited by: Omar on Apr 7, 2010 10:43 AMHi,
The DSO 0PUR_DS03 is loaded from 2LIS_02_SCL & 2LIS_02_SGR .
Open qty is updated both from SCL & SGR.
In SCL it is calculated in datasource level..
In SGR it is calculated in datasource as difference between the schedule line quantity (SCLQTY) and the total quantity (TTLQTY).
SCLQTY u2013 TTLQTY
The loading sequence is SCl then SGR.
1. So how come this routine calculates the open quantity? - it is calculated in datasource level..
2. I have to report parital open quantity as soon we have confirmed quantities, so I am trying to use 2LIS_02_SCN as a datasource and map it to 0PUR_DS03. Then I will map 0OPNQTY -> 0BO_QTY. Is my logic valid??
Partially open Qty is Confirmed Qty - EKES -MENGE.
3. To resolve the first issue I am thinking to enhance my datasource 2LIS_02_SCL with two fields:
- MENGE (Scheduled Qty.)
- WEMNG (GR Qty.)
then i will change the update rule routine as: Open Qty. = MENGE - WEMNG.
Do you think that approach is ok?
No need to enhance can be updated from SGR - SCLQTY u2013 TTLQTY.
http://help.sap.com/saphelp_nw04/helpdata/en/69/063f3f2615e07fe10000000a114084/content.htm -
How to get the open order quantity for a material
Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
AND VAPMA~WERKS = IT_OUTPUT-WERKS
AND VBAK~AUART IN S_AUART
AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.This could help.
*& Report: zsdvr055 date written: 03/24/00 *
*& Author: Brian Huntley last update: 03/24/00 *
*& Program Title: Open Order Report *
*& Description: This report will create a list of sales documents *
*& that are open (contain at least one item that is not shipped). *
*& The report will sort by ship-to customer name and by sales *
*& document number. *
*& Tables: *
*& Files: *
*& Transactions: *
*& Changes: *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
VBAP,
VBUP,
VBAK,
VBKD,
KNA1,
VBEP,
VBFA,
LIKP,
LIPS,
EKET,
T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
VBELN LIKE VBPA-VBELN, "sales document
POSNR LIKE VBPA-POSNR, "item number
PARVW LIKE VBPA-PARVW, "partner function
KUNNR LIKE VBPA-KUNNR, "customer number
END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
VBELN LIKE VBPA-VBELN, "sales document
END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
MATNR LIKE VBAP-MATNR, "material
ARKTX LIKE VBAP-ARKTX, "description
PSTYV LIKE VBAP-PSTYV, "item category
KDMAT LIKE VBAP-KDMAT, "customer material
NETWR LIKE VBAP-NETWR, "net value
WAERK LIKE VBAP-WAERK, "currency
KWMENG LIKE VBAP-KWMENG, "quantity
ERDAT LIKE VBAP-ERDAT, "entry date
NETPR LIKE VBAP-NETPR, "net price
KPEIN LIKE VBAP-KPEIN, "pricing unit
PRCTR LIKE VBAP-PRCTR, "profit center
ERNAM LIKE VBAK-ERNAM, "entered by
AUART LIKE VBAK-AUART, "order type
VKORG LIKE VBAK-VKORG, "sales organization
VTWEG LIKE VBAK-VTWEG, "distribution channel
VDATU LIKE VBAK-VDATU, "requested date (header)
BNAME LIKE VBAK-BNAME, "name of orderer
KUNNR LIKE VBAK-KUNNR, "sold-to customer
BZIRK LIKE VBKD-BZIRK, "sales district
KURSK LIKE VBKD-KURSK, "conversion rate
BSTKD LIKE VBKD-BSTKD, "customer PO
LFGSA LIKE VBUP-LFGSA, "overall delivery status
FKSAA LIKE VBUP-FKSAA, "overall billing status
KUNWE LIKE VBPA-KUNNR, "ship-to customer
NAME1 LIKE KNA1-NAME1, "ship-to customer name
ORT01 LIKE KNA1-ORT01, "ship-to address
REGIO LIKE KNA1-REGIO, "ship-to region (state)
LAND1 LIKE KNA1-LAND1, "ship-to country
END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
KUNNR LIKE VBAK-KUNNR, "sold-to customer
KUNWE LIKE VBPA-KUNNR, "ship-to customer
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ZDATE1 LIKE VBEP-EDATU, "requested date
ZDATE2 LIKE VBEP-EDATU, "scheduled date (confirm)
ZDATE3 LIKE VBEP-EDATU, "committed date
ZQTY1 LIKE VBAP-KWMENG, "qty ordered
ZQTY2 LIKE VBEP-BMENG, "backlog qty
ZEXTD LIKE VBAP-NETWR, "backlog net value
ZDESC(30) TYPE C, "backlog description
END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
WADAT LIKE VBEP-WADAT, "planned goods issue date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
BMENG LIKE VBEP-BMENG, "qty confirmed
END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ROMS1 LIKE VBEP-WMENG, "committed qty
END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
VGBEL LIKE LIPS-VGBEL, "sales document
VGPOS LIKE LIPS-VGPOS, "sales document item
VBELN LIKE LIKP-VBELN, "delivery number
POSNR LIKE LIPS-POSNR, "delivery item number
WADAT LIKE LIKP-WADAT, "planned GI date
WADAT_IST LIKE LIKP-WADAT_IST, "actual GI date
LFIMG LIKE LIPS-LFIMG, "actual qty delivered
ERDAT LIKE LIKP-ERDAT, "date created
ERZET LIKE LIKP-ERZET, "time created
END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
VBELV LIKE VBFA-VBELV, "sales document
POSNV LIKE VBFA-POSNV, "sales document item
VBELN LIKE VBFA-VBELN, "delivery number
POSNN LIKE VBFA-POSNN, "delivery item
VBTYP_N LIKE VBFA-VBTYP_N, "document category
RFMNG LIKE VBFA-RFMNG, "qty delivered
PLMIN LIKE VBFA-PLMIN, "plus/minus flag
END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG, "order qty
CONF_QTY LIKE VBEP-BMENG, "confirmed qty
NOCONF_QTY LIKE VBEP-BMENG, "qty not confirmed
DELV_QTY LIKE VBEP-WMENG, "qty delivered
NODELV_QTY LIKE VBEP-WMENG, "qty not delivered
REMAIN_QTY LIKE VBEP-WMENG, "qty remain to get conf date
REQ_DATE LIKE VBEP-EDATU, "request date
COM_DATE LIKE VBEP-EDATU, "committed date
DELV_QTY1 LIKE VBEP-WMENG, "preceding delivery qty
REMAIN_QTY1 LIKE VBEP-WMENG, "qty remain to get reqest date
REMAIN_QTY2 LIKE VBEP-WMENG, "qty remain to get commit date
THIRD_QTY LIKE VBEP-WMENG, "3rd party no PO qty
SO_STOCK LIKE MSKA-KALAB, "sales order stock
ZPRICE LIKE VBAP-NETPR, "unit price USD
ADRS1(40) TYPE C, "concatenated city and region
ADRS2(45) TYPE C, "city, region and country
ADRS3(80) TYPE C, "name, city, rgn, ctry
ZCNTR TYPE I. "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA INTO TABLE TVBPA
WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA APPENDING TABLE TVBPA
WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
CLEAR ITAB0.
MOVE TVBPA-VBELN TO ITAB0-VBELN.
APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
VBUP~POSNR = VBAP~POSNR
INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
VBKD~POSNR = VBAP~POSNR
INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
IF NOT S_KUNWE IS INITIAL.
CLEAR TVBPA.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = ITAB-POSNR PARVW = 'WE'.
IF SY-SUBRC <> 0.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = '000000' PARVW = 'WE'.
ENDIF.
MOVE TVBPA-KUNNR TO ITAB-KUNWE.
ELSE.
CLEAR ITAB-KUNWE.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
PARVW = 'WE'.
IF SY-SUBRC <> 0.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
PARVW = 'WE'.
ENDIF.
ENDIF.
IF NOT ITAB-KUNWE IN S_KUNWE.
DELETE ITAB.
CONTINUE.
ENDIF.
get ship-to customer address info
SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
WHERE KUNNR = ITAB-KUNWE.
MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
IF ITAB-LFGSA = 'A'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select schedule lines for SO item and write to internal table itab2a
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2A BY WADAT.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
LOOP AT ITAB2A.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
LOOP AT ITAB2A WHERE BMENG <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDLOOP.
get request date for SO item
IF NOCONF_QTY <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NOCONF_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NOCONF_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NOCONF_QTY.
ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
LIKP-ERDAT, LIKP-ERZET)
WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
CLEAR LIPS.
SELECT POSNR VGBEL VGPOS LFIMG
FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
CLEAR VBUP.
SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
IF VBUP-WBSTA = 'A'.
CLEAR ITAB3.
ITAB3-VGBEL = LIPS-VGBEL.
ITAB3-VGPOS = LIPS-VGPOS.
ITAB3-VBELN = LIKP-VBELN.
ITAB3-POSNR = LIPS-POSNR.
ITAB3-WADAT = LIKP-WADAT.
ITAB3-WADAT_IST = LIKP-WADAT_IST.
ITAB3-LFIMG = LIPS-LFIMG.
ITAB3-ERDAT = LIKP-ERDAT.
ITAB3-ERZET = LIKP-ERZET.
APPEND ITAB3.
ENDIF.
ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
IF SY-SUBRC <> 0.
IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
DELV_QTY1 = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
CLEAR LIKP.
SELECT SINGLE ERDAT ERZET
FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
WHERE VBELN = ITAB4-VBELN.
IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
AND LIKP-ERZET < ITAB3-ERZET ).
DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
get request dates for SO item
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to itab2c
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
REMAIN_QTY1 = DELV_QTY1.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
REMAIN_QTY2 = DELV_QTY1.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
IF ITAB3-WADAT <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB3-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue'.
ELSE.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue date'.
ENDIF.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
IF ITAB-LFGSA = 'B'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
select schedule lines for SO item and write to internal table
REFRESH ITAB2A.
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY1 = DELV_QTY.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY2 = DELV_QTY.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
LOOP AT ITAB2A.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
REMAIN_QTY = DELV_QTY.
LOOP AT ITAB2A.
IF ITAB2A-BMENG <> 0.
IF ITAB2A-BMENG <= REMAIN_QTY.
REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
ELSE.
ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
REMAIN_QTY = 0.
ENDIF.
ENDIF.
ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
IF NOCONF_QTY >= NODELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NODELV_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NODELV_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NODELV_QTY.
ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
IF ITAB-FKSAA <> 'C'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
REFRESH ITAB4.
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDLOOP.
loop thru PO's for SO item
LOOP AT ITAB4.
select delivery lines for PO item
SELECT EINDT EBELN EBELP MENGE FROM EKET
INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING EKET-MENGE REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING EKET-MENGE COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = EKET-EINDT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = EKET-MENGE.
ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
ENDSELECT.
ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
IF DELV_QTY < ITAB-KWMENG.
THIRD_QTY = ITAB-KWMENG - DELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING THIRD_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING THIRD_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE2 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = THIRD_QTY.
ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
DESCRIBE TABLE ITAB1 LINES ZCNTR.
IF ZCNTR = 0.
WRITE: / 'No Data Found for Selection'.
STOP.
ENDIF.
SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
LOOP AT ITAB1.
IF ITAB1-ZDATE1 = SPACE.
ITAB1-ZDATE1 = '99991231'.
ENDIF.
IF ITAB1-ZDATE3 = SPACE.
ITAB1-ZDATE3 = '99991231'.
ENDIF.
get SO item detail
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
AT NEW KUNWE.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
WHERE KUNNR = ITAB1-KUNNR.
CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY ' '.
CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY ' '.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
FORMAT RESET.
SKIP.
ENDAT.
print out backlog detail
CLEAR T171T.
SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
WRITE: /1 ITAB1-VBELN,
13(6) ITAB1-POSNR NO-ZERO,
21 ITAB-MATNR,
41 ITAB-ARKTX,
83 ITAB1-ZDATE1,
95 ITAB1-ZDATE3,
107 ITAB1-ZDATE2,
119 ITAB-ERNAM,
129 ITAB-BZIRK, 135 T171T-BZTXT,
157(20) ITAB-BSTKD,
179(12) ITAB1-ZQTY1 DECIMALS 0,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2,
225 ITAB1-ZDESC.
AT END OF VBELN.
SKIP.
ENDAT.
print footing at ship-to customer
AT END OF KUNWE.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
SKIP 2.
ENDAT.
AT LAST.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE: /1 'Report Total:',
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
ENDAT.
ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
REQ_DATE = SPACE.
EXIT.
ELSE.
REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE FTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE FTAB INDEX TAB_INDEX.
REMAIN = REMAIN + FTAB-WMENG.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
COM_DATE = SPACE.
EXIT.
ELSE.
COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE CTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE CTAB INDEX TAB_INDEX.
REMAIN = REMAIN + CTAB-ROMS1.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT.
Maybe you are looking for
-
Create a materized view without primary key constraint on the base table?
Hi I tried to create a materized view but I got this error: SQL> CREATE MATERIALIZED VIEW TABLE1_MV REFRESH FAST START WITH to_date('04-25-2009 03:00:13','MM-dd-yyyy hh24:mi:ss') NEXT sysdate + 1 AS select * from TABLE1@remote_db SQL> / CREATE MATERI
-
Facebook network in GraphML format (using XSLT)
hello, facebook developer platform provides a java api that allows us to extract friends list into java List of friends ids. my goal is to find a way to format facebook friends list data into GraphML format.this graphml file will be used to draw a Gr
-
Internal Table Reaches Maximum Line Count (or memory?)
I have an internal table that is filled in a Function Module READ_OTF_FROM_MEMORY. It was originally definesd as: DATA: T_OTFDATA_TAB LIKE ITCOO OCCURS 1 WITH HEADER LINE, I made it: DATA: T_OTFDATA_TAB LIKE ITCOO OCCURS 10000 WITH HEADER LINE, Howev
-
I've just installed an apple security update released today I think. On restart it is stuck on the grey apple page. How do I recover from this? Do I gave to wait for battery to run flat? Don't want to press and hold power button in case cause damage.
-
Adaptive Processing Server stays in Starting mode
Hi, trying to see if someone has run into this issue and give me some clues what is best to try. Just did an out of the box installation with a customer of BI 4.0 SP2. We noticed that the APS stays in Starting mode. We tried stopping it but that does