Open-Text Fax Server 9.4 deployment guide

Hello Team,
can somebody be please so kind to give me a helping hand.
Need access to:
http://zed.cisco.com/confluence/display/UC/UC+Products
-> Best Practices
-> Open-Text Fax Server 9.4 deployment guide
I always get an acess error when trying to open /download the document.
Any hints/tips are highly appreciated.
Rg
Peter

Couple of things, this is a public forum and you're posting internal links.
Just tried the link and the PDF is fine, got not problems to download it.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

SAP Content Server vs. Open Text Content Server

Hi,
We're currently trying to decide whether we implement SAP Content Server or an Open Text Content Server. We have the following requisites:
- Store documents (from FI, MM, HCM, etc.)
- Store SAP transactional data
- Use Archivelink
According to your experience what do you recommend?
Thanks in advance.
Regards,
Ricardo

Hi Ricardo
Contact Open Text directly, they have a really nice presentation which compares the functionality from a technical perspective. Unfortunately I can't it here on their behalf but I'm sure they would be happy to send you a copy of it.
SAP don't recommend the SAP content server for long term archiving so if you intend doing data archiving Open Text is probably a better option.
Regards,
Athol
Edited by: Athol Hill on Feb 24, 2011 8:55 PM

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

Open Text Content Server Monitoring Agent 5.0 with SCOM using SNMP

Hi All
Got a requirement to integrate Opentext monitoring agent with SCOM 2012.
Can we use SNMP to forward the alerts to SCOM console ? or can we directly monitor opentext content server with some MP's ?
Regards
Madhavi.

That's the point. You cannot discover Windows Computers as Network Devices with SCOM 2012. So sending traps (directly) to SCOM is not possible.
You can think about a workaround like writing the events to the Windows Event Log and grab them with an Event Log Rule/Monitor. Or send the traps to System Center Orchestrator and write an Alert using the SCOM Integration Pack.
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Creating domain and Excahnge mailbox , Fax Server etc.. to small busiiness

Hi ,
I would like to create to my costumer who has 2 computer (Win 8.1 on both: one laptop and one is a desktop computer) by his demand a domain which will contain of course his company's name (I did check the domain availability on one of the Domain web
checkers) and of course a mailbox and fax server or fax2mail option which will allow all faxes being sent - to get to his inbox and not to a fax machine.
However I wonder what roles should I add (I guess the the following roles are necessary:
*DHCP
*DNS
*Fax Server
*also there is a need to install the Exchange (maybe on some other computer)
I haven't mentioned that I created a server 2012 on a desktop computer i5 processor, with 10GB RAM, 500GB HD capacity .. Not a "super server" but this server/computer can meanwhile "provides the merchandising"
Please assist here :)
Thanks in Advanved :)

Hi,
Based on your description, I understand that you want to set up the Windows Server 2012 as DC and deploy Active
Directory environment. Then, add some roles (DHCP, DNS and Fax Server) and Exchange Server on the Server 2012 DC. If anything I misunderstand, please don’t hesitate to let me know.
Please refer to following threads and articles, then check if can help you.
DNS
Server and DC
Checklist: Add a Domain Controller with
the DNS Server Service
DHCP
Best Practices and DC
DHCP
Server in DCs and DNS Registrations
Fax Server Step-by-Step Guide
For installing exchange server on DC, it is not recommended.
Installing
Exchange on a domain controller is not recommended
In addition, please also refer to following thread and check if provide you more detailed suggestions of roles
installation.
Multi-Role
Domain controller
Hope this helps.
Best regards,
Justin Gu

How to disable Fax Server printing?

Recently installed and configured a fax server for a client running Server 2008. Users Remote into the server to run their industry-specific software. If they have a need to Fax something out of this application, they change their default printer
setting in the program to the Fax server via Windows Fax and Scan.
The faxes are transmitting and being delivered OK, but there is a copy of every outgoing fax that is printing on a shared network printer. I cannot seem to locate any settings to turn this off and cannot figure out why a copy is being sent to a non-specified
printer. The client does not want ANY copies of these outgoing faxes printed anywhere.
Where can I turn this printing function off for faxes?

Hi John,
Based on current situation, please refer to the following TechNet article and check if you deployed the fax
server correctly. Please also check the configuring outgoing fax settings.
Fax Server Step-by-Step Guide
Meanwhile, please refer to the following article and troubleshoot the fax server.
Troubleshooting: Fax Server
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Oracle UCM with Open Text Archive

Hello,
Do you know if it is possible to have oracle UCM with an Open Text Content Server? Can you share any experiences you had with me?
Thanks in advance,
Ricardo

Thanks Sagar for such quick response.
Yes, I do use SAP DB and trying to migrate files to Open Text Content Server. Actually I have been looking for other ways except changing the file names 'casue cannot change some names for technical reason .
Anyway, much appreciate for your help for me confirming no solution come yet from Open Text .
Regards,
Jin

ABAP for Open Text

Hi,
We are implementing Open Text for Finance AP, we have a third party workflow system running for corporate approval solution.
Is it possible for me to write an ABAP code retrieve the image or any URL link? So that I can view it outside SAP?
My objective is to let the approver view the original invoice which already deposit into Open Text Archive server before approved to release payment. The approver is not part of SAP users.
Any ideas or solution is very much appreciated.
Thanks in advanced.
Steven

FUNCTION Z_FI01_VIM_MAIL_TO_INT_EXT_USR .
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_OBJTYPE) LIKE SWOTOBJID-OBJTYPE OPTIONAL
*"     REFERENCE(I_OBJKEY) LIKE SWOTOBJID-OBJKEY OPTIONAL
*"     REFERENCE(IT_IMAGE_IDS) TYPE /OPT/D_ARC_DOC_ST
""Local Interface:
*" IMPORTING
*"     REFERENCE(LV_EMP_USERID) TYPE FITP_USER-UNAME
*"     REFERENCE(LV_EMP_EMAILID) TYPE PA0105-USRID_LONG
***FUNCTION MODULE Z_FI01_VIM_MAIL_TO_INT_EXT_USR.
* *&Get the Email id and User id Whom you want to Send ******
DATA:IT_RECEIVERS    TYPE STANDARD TABLE OF SOMLRECI1,
       WA_IT_RECEIVERS LIKE LINE OF IT_RECEIVERS,
       IT_RECEIVERS_FINAL TYPE STANDARD TABLE OF SOMLRECI1,
       IT_PACKING_LIST TYPE STANDARD TABLE OF SOPCKLSTI1,
       GD_DOC_DATA     TYPE SODOCCHGI1,
       WA_IT_PACKING_LIST LIKE LINE OF IT_PACKING_LIST,
       PSUBJECT(90)       TYPE C,
       IT_MESSAGE         TYPE STANDARD TABLE OF SOLISTI1,
       WA_IT_MESSAGE      LIKE LINE OF IT_MESSAGE,
       C1(99)    TYPE C,
       C2(15)    TYPE C,
       NUM_LINES TYPE I,
       WA_ACTORS       TYPE SWHACTOR,
       IT_ACTORS       TYPE TABLE OF SWHACTOR,
       IT_ACTORS_FINAL TYPE TABLE OF SWHACTOR,
       LV_EMP_EMAILID TYPE PA0105-USRID_LONG,
       G_SENT_TO_ALL   TYPE SONV-FLAG,
       IT_ATTACHMENT TYPE TABLE OF SOLISTI1,
       WA_ATTACHMENT TYPE SOLISTI1,
       LV_FILESIZE TYPE I,
       G_TAB_LINES TYPE I,
       LV_FILE_EXT TYPE CHAR27.
CALL FUNCTION '/PTGWFI/COA_W_RETRIEVE_USERS'
    EXPORTING
      ZPDCD             = '005'
      ZRSP              = 'ZRECEIVER'
      OBJTYPE           = I_OBJTYPE
      OBJKEY            = I_OBJKEY
    TABLES
      USERLIST          = IT_ACTORS
    EXCEPTIONS
      ROLE_NOT_RESOLVED = 1
      OTHERS            = 2.
* IF SY-SUBRC <> 0.
* ENDIF.
APPEND LINES OF IT_ACTORS TO IT_ACTORS_FINAL.
CALL FUNCTION '/PTGWFI/COA_W_RETRIEVE_USERS'
    EXPORTING
      ZPDCD             = '005'
      ZRSP              = 'ZSCAN_AGENT'
      OBJTYPE           = I_OBJTYPE
      OBJKEY            = I_OBJKEY
    TABLES
      USERLIST          = IT_ACTORS
    EXCEPTIONS
      ROLE_NOT_RESOLVED = 1
      OTHERS            = 2.
* IF SY-SUBRC <> 0.
* ENDIF.
APPEND LINES OF IT_ACTORS TO IT_ACTORS_FINAL.
SORT IT_ACTORS_FINAL BY OTYPE OBJID.
DELETE ADJACENT DUPLICATES FROM IT_ACTORS_FINAL.
*&-- Assign the Email id and User id to Whom you want to Send -------------&
LOOP AT IT_ACTORS_FINAL INTO WA_ACTORS.
    CLEAR LV_EMP_EMAILID.
    SELECT SINGLE USRID_LONG FROM PA0105 INTO LV_EMP_EMAILID
      WHERE UNAME = WA_ACTORS-OBJID.
    IF NOT LV_EMP_EMAILID IS INITIAL.
      FREE WA_IT_RECEIVERS.
      WA_IT_RECEIVERS-RECEIVER   = LV_EMP_EMAILID. "&---- Assign Email id
      WA_IT_RECEIVERS-REC_TYPE   = 'U'.                    "&---- Send to External Email id
      WA_IT_RECEIVERS-COM_TYPE   = 'INT'.
      WA_IT_RECEIVERS-NOTIF_DEL = 'X'.
      WA_IT_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND WA_IT_RECEIVERS TO IT_RECEIVERS .
    ENDIF.
    FREE WA_IT_RECEIVERS.
    WA_IT_RECEIVERS-RECEIVER   = WA_ACTORS-OBJID. "&----- Assign SAP User Id
    WA_IT_RECEIVERS-REC_TYPE   = 'B'.                    "&-- Send to SAP Inbox
    WA_IT_RECEIVERS-COM_TYPE   = 'INT'.
    WA_IT_RECEIVERS-NOTIF_DEL = 'X'.
    WA_IT_RECEIVERS-NOTIF_NDEL = 'X'.
    APPEND WA_IT_RECEIVERS TO IT_RECEIVERS .
    CLEAR WA_ACTORS.
ENDLOOP.
*& - END of Assign the Email id and User id to Whom you want to Send --&
"&--- Read the Number of lines in the Internal Table
DESCRIBE TABLE IT_RECEIVERS LINES NUM_LINES.
"&--- Check the Sender Email id or SAP User id is got or not.
IF NUM_LINES IS NOT INITIAL.
    LOOP AT IT_RECEIVERS INTO WA_IT_RECEIVERS.
      APPEND WA_IT_RECEIVERS TO IT_RECEIVERS_FINAL.
* Add thetext to mail text table
*&-- Subject of the mail -------------&*
      PSUBJECT = 'Request for original invoice'(002).
*&-- Body of the mail ----------------&*
      CLEAR WA_IT_MESSAGE.
      C1 = 'Dear'(005).
      C2 = WA_IT_RECEIVERS-RECEIVER.
      CONCATENATE C1 C2 INTO
      WA_IT_MESSAGE-LINE SEPARATED BY SPACE.
      CONCATENATE WA_IT_MESSAGE-LINE ',' INTO WA_IT_MESSAGE-LINE.
      APPEND WA_IT_MESSAGE TO IT_MESSAGE.
*** insert Blank Line *********************************************
      CLEAR WA_IT_MESSAGE.
      WA_IT_MESSAGE-LINE = '                               '.
      APPEND WA_IT_MESSAGE TO IT_MESSAGE.
******* Assign your Text below *************************************
      CLEAR WA_IT_MESSAGE.
      WA_IT_MESSAGE-LINE = 'A Test Mail sent from "Enteg InfoTech" through ABAP Program.'(003).
      APPEND WA_IT_MESSAGE TO IT_MESSAGE.
*** insert Blank Line{} *********************************************
      CLEAR WA_IT_MESSAGE.
      WA_IT_MESSAGE-LINE = '                                        '.
      APPEND WA_IT_MESSAGE TO IT_MESSAGE.
**********Assign your Text below ********************************
      CLEAR WA_IT_MESSAGE.
      WA_IT_MESSAGE-LINE = 'This mail generate automatically. Please do not reply.'(004).
      APPEND WA_IT_MESSAGE TO IT_MESSAGE.
**********& Send EMAIL MESSAGE &*********************************
      GD_DOC_DATA-DOC_SIZE = 1.
*Populate the subject/generic message attributes
      GD_DOC_DATA-OBJ_LANGU = SY-LANGU.
      GD_DOC_DATA-OBJ_NAME = 'SAPRPT'.
      GD_DOC_DATA-OBJ_DESCR = PSUBJECT.
      GD_DOC_DATA-SENSITIVTY = 'F'.
*Describe the body of the message
      CLEAR WA_IT_PACKING_LIST.
      REFRESH IT_PACKING_LIST.
      WA_IT_PACKING_LIST-TRANSF_BIN = SPACE.
      WA_IT_PACKING_LIST-HEAD_START = 1.
      WA_IT_PACKING_LIST-HEAD_NUM = 0.
      WA_IT_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES WA_IT_PACKING_LIST-BODY_NUM.
      WA_IT_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND WA_IT_PACKING_LIST TO IT_PACKING_LIST.
*&------ Create File Attachment
      CALL FUNCTION 'SCMS_HTTP_GET'
        EXPORTING
          CREP_ID               = IT_IMAGE_IDS-ARCHIV_ID
          DOC_ID                = IT_IMAGE_IDS-ARC_DOC_ID
        IMPORTING
          LENGTH                = LV_FILESIZE
        TABLES
          DATA                  = IT_ATTACHMENT
        EXCEPTIONS
          BAD_REQUEST           = 1
          UNAUTHORIZED          = 2
          NOT_FOUND             = 3
          CONFLICT              = 4
          INTERNAL_SERVER_ERROR = 5
          ERROR_HTTP            = 6
          ERROR_URL             = 7
          ERROR_SIGNATURE       = 8
          OTHERS                = 9.
      IF SY-SUBRC = 0.
        CONSTANTS LC_FM_NAME   TYPE /PTGWFI/CONST VALUE 'FM_GET_IMG_FILE_EXT'.
        CONSTANTS LC_PROD_CODE TYPE /PTGWFI/PDCD VALUE '005'.
        DATA LV_FILE_EXT_FM TYPE /PTGWFI/VALUE.
        CALL FUNCTION '/OPT/VIM_READ_CONSTANT'
          EXPORTING
            PROD_CODE   = LC_PROD_CODE
            PARAM_NAME = LC_FM_NAME
          IMPORTING
            PARAM_VALUE = LV_FILE_EXT_FM
          EXCEPTIONS
            NOT_FOUND   = 1
            OTHERS      = 2.
        CALL FUNCTION LV_FILE_EXT_FM
          EXPORTING
            I_ARCHIV_ID         = IT_IMAGE_IDS-ARCHIV_ID
            I_ARC_DOC_ID        = IT_IMAGE_IDS-ARC_DOC_ID
          IMPORTING
            E_FILE_EXT          = LV_FILE_EXT
          EXCEPTIONS
            ERR_GET_CONNECTIONS = 1
            FILE_EXT_NOT_FOUND = 2
            OTHERS              = 3.
* Write Packing List for Attachment
        WA_IT_PACKING_LIST-TRANSF_BIN = 'X'.
        WA_IT_PACKING_LIST-HEAD_START = 1.
        WA_IT_PACKING_LIST-HEAD_NUM   = 1.
        WA_IT_PACKING_LIST-BODY_START = 1.
        DESCRIBE TABLE IT_ATTACHMENT LINES WA_IT_PACKING_LIST-BODY_NUM.
        WA_IT_PACKING_LIST-DOC_TYPE   = LV_FILE_EXT.
        WA_IT_PACKING_LIST-OBJ_DESCR = 'Image'(005).
        WA_IT_PACKING_LIST-OBJ_NAME   = 'Image'(005).
* WA_IT_PACKING_LIST-doc_size   = WA_IT_PACKING_LIST-body_num * 255.
        WA_IT_PACKING_LIST-DOC_SIZE = LV_FILESIZE.
        APPEND WA_IT_PACKING_LIST TO IT_PACKING_LIST.
        CLEAR WA_IT_PACKING_LIST.
* Fill the document data and get size of attachment
        GD_DOC_DATA-OBJ_LANGU = SY-LANGU.
* READ TABLE It_ATTACHMENT INTO Wa_ATTACHMENT INDEX G_TAB_LINES.
* w_document_data-doc_size = ( g_tab_lines - 1 ) * 255 + STRLEN( w_attachment ).
        GD_DOC_DATA-DOC_SIZE = LV_FILESIZE.
      ENDIF.
*&------ Call the Function Module to send the message to External and SAP Inbox
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
         DOCUMENT_DATA                    = GD_DOC_DATA
         PUT_IN_OUTBOX                    = 'X'
         COMMIT_WORK                      = 'X'
*       IMPORTING
*   SENT_TO_ALL                      = G_SENT_TO_ALL
*   NEW_OBJECT_ID                    =
        TABLES
          PACKING_LIST                     = IT_PACKING_LIST
*   OBJECT_HEADER                    =
         CONTENTS_BIN                     = IT_ATTACHMENT
         CONTENTS_TXT                     = IT_MESSAGE
*   CONTENTS_HEX                     =
*   OBJECT_PARA                      =
*   OBJECT_PARB                      =
          RECEIVERS                        = IT_RECEIVERS_FINAL
       EXCEPTIONS
         TOO_MANY_RECEIVERS               = 1
         DOCUMENT_NOT_SENT                = 2
         DOCUMENT_TYPE_NOT_EXIST          = 3
         OPERATION_NO_AUTHORIZATION       = 4
         PARAMETER_ERROR                  = 5
         X_ERROR                          = 6
         ENQUEUE_ERROR                    = 7
         OTHERS                           = 8
*      IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*      ENDIF.
*   Push mail out from SAP outbox
      SUBMIT RSCONN01 WITH MODE = 'INT' AND RETURN.
      CLEAR: WA_IT_RECEIVERS, IT_RECEIVERS_FINAL, IT_MESSAGE, IT_PACKING_LIST.
      REFRESH: IT_RECEIVERS_FINAL, IT_MESSAGE, IT_PACKING_LIST.
    ENDLOOP.
ENDIF. "&---- END of Check the Sender Email id or SAP User id is got or not.
ENDFUNCTION.

ESKER FAX SERVER CONFIGURATION

Hi,
Appreciate if you can help me with ESKER FAX SERVER CONFIGURATION.
Any guide or documentation to setup and configure would be a great help.
Thank you
HJ

Maybe you should contact your ESKER.... they should be able to provide the documentation to integrate your FAX Server with SAP..
Anyhow.. you need to configure the FAX node in SCOT
Read,
http://help.sap.com/saphelp_nwpi71/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
Regards
Juan

Just FYI, new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide

New! Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide
This new guide is available on the Web at
http://technet.microsoft.com/en-us/library/dn641937.aspx. It is also available for download in Word format at TechNet Gallery at
http://gallery.technet.microsoft.com/Windows-Server-2012-R2-37eb8e17
If you work for a Cloud Service Provider (CSP) or an organization that's planning on deploying cloud technologies, you might be interested in the new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide.
You may already know that in Windows Server® 2012 R2, the Remote Access server role includes the Routing and Remote Access Service (RRAS) role service. (It also includes DirectAccess and Web Application Proxy, however those role services will not be discussed
in this article.)
The new deployment guide demonstrates how to use Windows PowerShell to deploy RRAS as a virtual machine (VM)-based multitenant software gateway and Border Gateway Protocol (BGP) router that allows CSPs and Enterprises to enable datacenter and cloud network
traffic routing between virtual and physical networks, including the Internet.
You can use the gateway with VM networks by using either Hyper-V Network Virtualization or Virtual Local Area Networks (VLANs) - but using Network Virtualization is recommended due to VLAN limitations such as difficult management and a limited number of
available VLAN IDs.
If you're using System Center Virtual Machine Manager (SC VMM), you can use SC VMM to deploy Windows Server Gateway; however even if you are using SC VMM, you can manage the gateway with the same Windows PowerShell commands that are used for the RRAS Multitenant
Gateway. (Some Windows Server Gateway features are configurable only with Windows PowerShell.)
For information on deploying Windows Server Gateway with SCVMM, see the Test Lab Guide: Windows Server 2012 R2 Hyper-V Network Virtualization with System Center 2012 R2 VMM, at
http://www.microsoft.com/download/details.aspx?id=39284
With the RRAS Multitenant Gateway, you can create site-to-site VPN connections between your tenants' physical locations and your cloud datacenter. You can also provide tenants with point-to-site VPN connections that allow tenant Administrators to access
and manage their VM resources from anywhere. The RRAS Multitenant Gateway also allows you to configure Network Address Translation (NAT), so that tenant VMs can access the Internet, and you can deploy dynamic routing by configuring the gateway and tenant gateways
with BGP.
Thanks -
James McIllece

Hi,
It is very useful , thanks for your sharing .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

FAX server in 10.5 server and across subnets

We can use 10.5 Server as a FAX server. Since I got this working a while ago, it has run reliably.
This is how we are doing it. Hopefully this will help others get it working too.
Our server: 10.5.2, Pro Intel 2x2.8 quad with a USB Apple faxmodem attached to the front USB port plugged into a standard phone line. Print service is set up and running and happens to be serving printers for us. Once the FAX seemed to get confused and not receive or send. I unplugged the USB fax, plugged it back in and it was fine again.
At the server I opened a text edit document and told the server to fax from Print > PDF > Fax PDF. A fax printer was automatically created on the server. While the fax was printing I told the printer in the Dock to "keep in dock." Opened that fax printer, choose "info" icon in top of window and renamed the fax from "external modem" to a new name so that it would be easy for our staff to use and find it. The server now has a fax on it. As anyone who has tried this has found you CANNOT edit the FAX from ServerAdmin. You can now see it as a queue with the new name it was given but editing it not possible from SA.
At the server still in System Preferences > Fax and print > the new fax appears in the bottom of the printers list under "Faxes." Select the fax. Select "receive options" and set up how the fax is to receive and place received faxes. Ours go in to a folder in a share point which is available and automounted to everyone on our network so anyone, anywhere can get the incoming faxes. The next point assumes that you will do the same.
In 10.4 and once in 10.5 I had to delete the fax manually from System Preferences and recreate it as above when everything seemed to stop working and unplugging the modem and rebooting the server did not fix the stall. As long as everything is named exactly the same when you recreate the fax, no other changes or repeat of what is described below was needed.
For each of the users in our OD:
Tell them each to do the following: Open Applications > Applescript > Folder actions setup. Check off "enable folder actions," hit the + under the left box and select the folder in the share where the faxes are being received. Now select the fax folder in the left and hit the + under the right box and choose "add - new item alert." Save as necessary. The users who do this will now get notification when a new fax arrives and is deposited by the server in the Fax folder.
Now to get the fax to the clients to fax out on. The following will also get all of your shared printers onto any off server's subnet clients. For us the fax did not even show up in local subnet clients as printers usually do. So I kept working and eventually came up with the following:
Our network:
Main location 192.168.1.* server is here.
Remote locations connected via Verizon T1 and routers with no firewalling
192.168.2.*
192.168.3.*
Our client machines :
Intel white iMacs all running 10.5.2 with no special software for faxing. Our clients are bound to and controlled by our server.
I have been trying to get our server to serve the FAX across our 2 remote subnets since 10.3. With the newer CUPS coming with 10.5 and Apple now owning it I hoped that there would be an easy solution to get non local subnet computers the ability to see shared faxes and printers. Sent a forum question and got the following which was great news
Erich Wetzel wrote:
Can anyone advise, now that Apple owns CUPS, how to allow my other
two subnets to BrowsePoll our server for its printers?
The simplest way is to change the "Allow from @LOCAL" lines to be
"Allow from all". You can also use the web interface and check the
"Allow printing from the Internet", which does the same. If you
don't want to open up that much, just add "Allow from" lines for
each subnet.
Once you make this change, *do not* toggle the printer sharing box,
or you'll have to make the changes all over again.
Michael Sweet, Easy Software Products mike at easysw dot com
Michael,
Thanks for the reply, sounds like you have my solution. Small problem, upon selecting "allow printing from internet" in the web interface and committing the changes, the server restarts and the check box is empty again. In quick tests, the other options can be turned on and off as you would expect. Is there something particular to the Apple 10.5.1 install that would not permit internet printing or not permit this change?
I think the check box state in the web interface is a known bug in
CUPS 1.3.4.
I used the web interface for cups on the server and manually added the networks as described by Michael above. I don't know if it is required but I restarted the server. Open > Safari > browse to localhost:631 and you will get the CUPS web interface. The CUPS web interface is available on servers and clients. You can also browse to an IP or FDQN:631 to get the web interface from a receptive other machine.
The server was now supposedly ready to accept "browsepoll" requests from clients. I had played with this before so I was somewhat familiar with what to do next. Essentially each client needs to be told to contact the server and ask it for its printers. That is what browsepoll does in CUPS.
At the client, be logged in as an admin user OF THE CLIENT. Using Terminal and a text editor, edit as root /etc/cups/cupsd.conf
A few lines down look for:
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
After that we added :
#*added by Erich*
BrowseProtocols all
BrowseRemoteProtocols all
BrowsePoll yourserver:631
BrowsePort 631
#*added by Erich*
where "yourserver" is either the IP address or FDQN of your server as seen by the client machine.
Save the file. Reboot the client. The CUPS system on the client will now ask your server CUPS system for its printers directly and repeatedly until it gets them. If it does not get any you will not be notified in anyway other than log messages on the client, see Console > /var/log > cups to review them, and the fact that you don't get your server's printers being available on the client.
This last piece came from a discussion started by Alessandro Dellavedova : check the starting post
http://discussions.apple.com/thread.jspa?messageID=5702731&#5702731
If you go to Safari > Localhost:631 on the client, CUPS should now see both the printers and the fax which are being hosted by your server.
Here's the fun part for me, with no additional playing I was now able to see the fax we created long ago in the print dialog printer list. You do not have to go to Print > PDF > Fax PDF, you can but do not have to. Just select the fax from the printer list and the dialog changes to fax appropriate options. Now we were able to print any document to the fax directly.
Odd behavior I have yet to figure out. I do not see the fax in the System Preferences > print and fax pane on the client machines. However, I can now fax through our server from all of our clients no matter what subnet they are on.
Making the same additions to the cupsd.conf file on remote machines which VPN via the internet to your network will get them the printers and fax in the same way. I do this with a powerbook and Imac from home so i can print at and fax from work.
This is what I did to get it working for us. Hope this helps.
-Erich

This is Great! Thanks a lot, this was exactly what I was looking for!

Cisco Fax Server (Captaris) and Cisco Fax Relay

Hello all!
i know that Captaris Cisco Fax Server works well with T.38 Fax Relay...and what about Cisco Fax Relay? Is it compatible?
thanks,
met

Hi!
Please check the following link, specially Pg. 9 "ISDN/MGCP Cisco Fax Relay Mode" . You'll see the deployment models of the Cisco Fax server: IP T.38 Fax Relay, ISDN E1/T1 Direct Connection and ISDN/MGCP Cisco Fax Relay Mode:
*** Installation Guide Supplement for Cisco Fax Server ***
www.cisco.com/en/US/docs/voice_ip_comm/fax_server/90/faxigsup.pdf
Hope this helps!
Regards,
Teresa.
If it helps, please rate! :)

Getting error while opening pdf on server

Dear All,
I am working on jdeveloper 11.1.1.4.0.
I have a use case where on click of link , generating a dynamic pdf. The pdf i am arranging with the help of itext through backing bean. It is generating as well downloading the pdf.I have used filedownloadlistner to call the generate and download pdf methods.
On integrated weblogic server the pdf is working fine, but when i deploy on server while opening pdf getting error :
*"Adobe Reader could not open 'test.pdf' beacause it is either not a supported file type*
*or because the file has been damaged (for example, it was sent as an email attachment and*
*wasn't correctly decoded)."*
I am not able to get the root cause for the problem. The sample code to generate and download pdf is :
// Generate PDF
private void generatePDFFile(FacesContext facesContext,
java.io.OutputStream outputStream) {
try {
System.out.println("In Generate PDF................");
Document document = new Document(PageSize.A4);
PdfWriter.getInstance(document, new FileOutputStream(FILE));
document.open();
addMetaData(document);
addTitlePage(document);
document.close();
System.out.println("End of PDF......................");
facesContext = facesContext.getCurrentInstance();
ServletContext context = (ServletContext)facesContext.getExternalContext().getContext();
System.out.println(context.getRealPath("/"));
String FILE = "test.pdf";
File file = new File(FILE);
FileInputStream fdownload;
//BufferedInputStream bis;
byte[] b;
System.out.println(file.getCanonicalPath());
System.out.println(file.getAbsolutePath());
fdownload = new FileInputStream(file);
int n;
while ((n = fdownload.available()) > 0) {
b = new byte[n];
int result = fdownload.read(b);
outputStream.write(b, 0, b.length);
if (result == -1)
break;
outputStream.flush();
} catch (Exception e) {
e.printStackTrace();
Download PDF
private void downloadPDF(FacesContext facesContext, java.io.OutputStream outputStream) {
try {
facesContext = facesContext.getCurrentInstance();
ServletContext context = (ServletContext)facesContext.getExternalContext().getContext();
ExternalContext ctx = facesContext.getExternalContext();
HttpServletResponse res = (HttpServletResponse)ctx.getResponse();
res.setContentType("application/pdf");
outputStream = res.getOutputStream();
System.out.println(context.getRealPath("/"));
File file = new File(FILE); // FILE = 'test.pdf'
FileInputStream fdownload;
// BufferedInputStream bis;
byte[] b;
fdownload = new FileInputStream(file);
//bis = new BufferedInputStream (new FileInputStream(file));
int n;
while ((n = fdownload.available()) > 0) {
b = new byte[n];
int result = fdownload.read(b);
//outputStream.write(b, 0, b.length);
outputStream.write(b, 0, b.length);
if (result == -1)
break;
outputStream.flush();
outputStream.close();
fdownload.close();
} catch (Exception e) {
e.printStackTrace();
Any help will be appreciated.
Thanks
Kanika

If the pdf file don't open on the server where you created them, they won't open on the client side either.
The code you are using should be refactored to use different file names for the generated files. In a multi user environment (which every web application is) you overwrite the file generated with each new request, even before the file is loaded by a client. This will corrupt the file a client is loading and you get the error you see.
Next I would look into org.apache.commons.io package (http://commons.apache.org/io/) which has utility classes which allows easy handling of streams without looping over the data.
Timo

Issue when trying to deploy Monitoring Server Reports on Deployment Wizard

Hi all.
I have to install the Monitoring Server Role on a server that already has the Lync Server 2010 up and running.
I'm new to Lync Server so my experience with the product is limited, so I need some help with an issue.
I followed the Deployment Guide and for now I managed to do the following:
- Installed an SQL Server 2008 Standard with SP1 with SSRS also;
- Updated the Topology to include a Monitoring Server, and also published the new topology;
- Installed the new components of the monitoring server.
I can also refer that the SQL Server Instances and Lync Server Front-End are in the same server h where I'm installing the monitoring server, and there is only one Front End Pool.
As far as I can tell everything was successfully done, and I couldn't find any errors until now.
And finally the issue appeared when I wanted to deploy the Monitoring Server Reports to the Reporting Services Server.
In the deployment Wizard of the Lync Server 2010 the link for that option is disabled, no further information is given.
I tried to find on the ISO and .exe or .msi files that could deploy the reports, but could not find any.
I believe it isn't a problem of permissions of the user because i followed the documentation.
I hope someone can help me find the problem, and if possible a solution for it.
Best regards.

Hi,
From your description above, it is a Lync Server 2010 Enterprise Edition and you deploy Monitoring Server in the same Server with FE Server.
If it is the case, you may meet unknown issues as you must deploy Monitoring Server on a separate Server. You can only collocate Monitoring Server with Archiving Server.
Please try to delete the Monitoring Server configuration in Lync Topology and then republish topology, and rerun Step 2. After these, please deploy Monitoring Server with a Separate Server and test if the issue happen again.
More details:
https://technet.microsoft.com/en-us/library/gg398102(v=ocs.14).aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Accessing attachments stored in Open text (ECC) with Work manager 6.0

Hello Experts,
We are using Open text in one of our ECC systems to store documents, files, pdfs and other attachments for the Work Orders and Notifications.
We want to configure the Work Manager 6.0 application hosted on SMP2.3, in order to fetch all the Work orders in the mobile device.
Now the question is - Can we access the attachments on the mobile device, from the out of the box Work Manager configuration.
Or, is there a need to install any plug-ins in the ECC/Agentry side to enable the same.
Thanks,
Abhishek

Hi Abhishek,
This isn't out of the box functionality for Work Manager so you'll need to enhance the existing functionality.
To access OpenText Attachments (via ArchiveLink) in WorkManager try looking at the following->
1. Get Attachments
BAPI Wrapper - /SMERP/CORE_DOBDSDOCUMENT_GET
MDO Class - /SMERP/CL_CORE_KWDOCUMENT_DO (Method - GET)
You'll see the above GET method calls (If you GOS_ACTIVE flag is true) - GOS_DOCUMENT_GET_INFO
This is responsilbe for getting the attachment metadata returned to the Work Manager Client ->
ET_COMPONENTS
ET_SIGNATURE
ET_CONNECTIONS
To get the attachment metadata stored in OpenText via ArchiveLink look at the below Function Modules -
ARCHIV_GET_CONNECTIONS
ARCHIVOBJECT_STATUS
You could enchance the GOS_DOCUMENT_GET_INFO method with a Post-Exit method or Implement the BADI /SMERP/MDO_CORE_DOCUMENTS - END_BDS_FETCH
2. Create Attachments
BAPI Wrapper -/SMERP/CORE_DOBDSDOCUMENT_CRT
MDO Class - /SMERP/CL_CORE_KWDOCUMENT_DO (Method - CREATE)
This calls the method BDS_DOCUMENT_CREATE to create the file and store it against the Work Order / Notification.
You could look at following Function Modules ->
ARCHIVOBJECT_CREATE_TABLE (Create the file on the OpenText server)
ARCHIV_CONNECTION_INSERT (Link the newly created file with the Work Order / Notification)
The BADI doesn't provide a corresponding Create method so you could enhance the MDO class /SMERP/CL_CORE_KWDOCUMENT_DO with new method that calls the ArchiveLink Logic instead of the BDS_DOCUMENT_CREATE method. The new method can be configured via the Syclo Config Panel to be called instead of the standard CREATE method.
Also check out the document - Document Upload & Download handling in SAP Work Manager 6.0
Section 7 & 8 covers the BAPI Wrappers/Class Handlers & Ehancement Spots for Document handling
Hope that helps.
Cheers,
Stephen

Open-Text Fax Server 9.4 deployment guide

Similar Messages

Maybe you are looking for