Open TextEdit with right-click

Hello,
I don't know if this is the right place to post my question. I'm still attempting to make the transition from Win to Mac and I'm looking for a simple way to create a text document while browsing my hard drive. In windows it was just right-clicking and selecting 'new' 'text document'. Is there an equivalent for osx?
Thanks,
Conan.

Try this: http://growlichat.com/NuFile.php
I use it; it works great. However, you may have to right-click, then go to 'More...', then go to New File.
~D

Similar Messages

My trackpad can't open file with double click

i don't know what's going on, but my trackpad can't open file with double click. i have to open it with right click, open or open with. i've tried to fix it in the system preferences, it didn't work out well.

William - you are wonderful! I had looked at that - they were set to 'internal' which seemed like RH...but selecting the 'design view' and then reselecting 'use default editor' instead of 'auto-select editor' did it. THANK YOU!!!!!

Using firefox 37.0.1 windows 7. open a tab (right click) it's blank. copy and paste and go the url from the tab into a new private window and it works.

Opening a tab (right click on a url) and I get an empty/blank window.
If I copy the url from the emty/blank tab and then open a new private browsing window and do a paste and go, everything works.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Disable (all) functions on the block diagram with right-click menu

Hello to everyone,
here is one more idea, which I'd like to propose.
As for me, it would be useful to have the following: when all components (functions, wires, subVIs, etc.) are selected on the block diagram (like, after ctrl+A), operator could do right-click, and in the menu would appear menu item "Disable everything". After it, all the code could be placed into Disable structure.
Of course, I can add Disable structure to block diagram manually, and cover whatever I want, but with right-click menu it would be much faster.
Also, it can be modified to disable only selected items - then each of them can be placed into separate Disable structure, and, for example, additionaly in the enabled case of Disable structure, corresponding wires will be connected. Sometimes it is needed for testing - just to disable couple functions, and test subVI. Or to disable subVI fully (it's faster, then disable place, where it is called. Especially, if subVI is used in many places).
It will not make debugging difficult, because anyway Disabled structures are used; such functionallity can just make life a little bit easier...

There is always the File->New... which opens up a new window. You can have your templates in that window by putting them somewhere (I don't remember where at the moment).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Help with right clicking and downloads

how do i save a picture using safari, when i use firefox i right click and select "save as" but on safari, that option isnt available. also, when im downloading something on firefox, off of like rapidshare or megaupload or sendspace, if i click it, it opens a new box and there are options of opening it, or saving it somewhere on your computer, but when i use safari, and i click on a download it just opens the content on a new page, and when i click file or right click, saving it to my computer isnt available either. help?

I'm totally new to Mac myself but try holding down the control button then hit the central 'click' button (what ever it is called) that seems to open up the 'right click' display with the 'save as' option.
er... at least it seems to on mine.

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Unable to close open apps with double clicking the button and when I tap screen does not respond?

Cannot not close open apps with double clicking the button Since downloading iOS8.

What happens when you try? Does double clicking the ?home button bring up the Task Bar of recently used apps? If so what happens when you flick up on the preview screen for the app you want to close?
To quit an app double click the Home button to reveal the row of recently used apps. Flick up on the page preview and it will fly away and disappear. That quits the app.

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

Question
My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

Hi jholzworth,
It sounds like you might have accidentally hit the zoom button. Try hitting ''CTRL + 0'' to return it to normal size. Just so you are aware, ''CTRL'' and ''+'' will zoom in and ''CTRL'' and ''-'' will zoom out.
Hopefully this helps!

Cannot open itunes errorn2096 right clicked on quicktime player went to properties no compatibly tab

cannot open itunes errorn2096 right clicked on quicktime player went to properties no compatibly tab

You're on the right track, because this one is usually (at the moment) a compatibility problem. But if you're getting this when launching iTunes, instead try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

When I try to open my applications, they won't open. I can only open them by right click open. Please help. I need to use this for school.

I can open files on my desktop and I can only open them by right click then open. Please help ASAP. I am using this MacBook for school. Pls help asap

Macbook Pro
System Preference > Trackpad > Point and Click
At the bottom adjust the Tracking Speed slider.
Best.

I can't open Photoshop by right clicking mouse on a photo on Bridge

I can't open Photoshop by right clicking mouse or double clicking on a photo on Bridge. The right click does not give me Photoshop as an option.

Edit/preferences/file type association.

Sublime Text 2 won't open files with double click

Hi, this is my first time asking for something.
Well, i've been using Scribes, but sometimes i need tabs in my text editor, so i installed Sublime Text 2.
The problem is that i can't open files with double click, i need to use "subl filename" and that it's not funny :S
If i double click a file ST2 opens, but with a tab named "file" and without content.
Is there a fix for that?
My Arch installation (if is neccesary):
Arch x86_64
Openbox (stand-alone)
PCManFM
P.D: sorry for my english D:

the reason seems to be a broken desktop file. `/usr/share/applications/sublime-text.desktop` says `Exec=subl %U`, but it should be `%f`. Also the Aur package does not provide a `subl` symlink so you should create one.

Flash files with right click imported in dreamweaver files

Flash files created with Captivate which contain rightclick
functionality are imported to html files created in Dreamweaver. In
other words, I don't use the html created by Captivate but another
html file to build up a whole course. But now a couple of those
flash files contain a right click and obviously I have to adjust
the dreamweaver file with some of the script that William Heinz has
created. I am not an HTML expert and I am not 100% confident that I
can do with just endless try&error. Could anyone give me some
hints?
I suppose I need to use the second bit of William's article
"the more complex requirement".
When I insert the flash file this is what I get: (This is
where I am suppose to make the changes????)
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','746','height','591','title','Schedule
Let
Me','vspace','5','src','Resources/Sched_LM_skin','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','Resources/Sched_LM_skin'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="746" height="591" vspace="5" title="Schedule Let Me">
<param name="movie" value="Resources/Sched_LM_skin.swf"
/>
<param name="quality" value="high" />
<embed src="Resources/Sched_LM_skin.swf" width="746"
height="591" vspace="5" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
</object></noscript>
I am not sure what to do with the "<Body
onload='javascript:init()..... "etc as suggested by William.
Thanks for any advice on this!!!

I hope there is one person out there who can help me with
this issue.
I have started from scratch and created a blank html with
dreamweaver and inserted the flash file (with right click
animation) created with Captivate.
Then I made the adjustments as per Heinz and also included a
ID=Captivate1 as the RightClick.js refers to that.
The main difference between this html file and the html file
created with Captivate, is that the Captivate one also has
writedocument bit.
Anyway, is there anybody in the world who can give me
atip/hint/suggestion?????

Deactive OLAP functions with right click

Hi guys,
I want to deactive "OLAP functions with right click" in thw workbooks to avoid some mis-operations from users. I tried to uncheck it from BEx toolbar (under "Settings") and saved the workbook. But when I reopen the workbook, it becomes active again. Does anyone know how to deactive it forever? Thanks a lot.

Hello,
Go to Business Explorer Menu, Select Settings, Uncheck OLAP Function with Right Click and save it as existing workbook.
I have tried it. It works, when you reopen, it will be still disable..
Hope it helps.
San.
Message was edited by: SAN

Open TextEdit with right-click

Similar Messages

Maybe you are looking for