Open the application multiple times in the same instance

Hello,
we are creating a swing application, using the following standard code:
SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
Every time we call our program, it opens a new application. If we call it twice, 2 applications will be opened.
We want to avoid that.
That is, we call first our program, it opens the application once.
Then everytime we call our program again, it opens it in the same previously opened application.
Do you know how to do that?
Thanks a lot,

If we call it twiceWhy you should call it twice?

Similar Messages

How to show the region multiple times on the same page

Hi,
I have a PL/SQL Dynamic Content region which creates a report with custom layout using pl/sql web toolkit. The stored procedure takes the parameter and creates report. Can I display the same region multiple times by calling it from loop with different parameter each time ?
Thank you,
Asha

Hello Asha,
In your plsql you can do a loop, so you would only have one plsql region but in there that can generate different areas of your website.
e.g. it can loop and generate different divs or tables.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

I recently updated my new iphone 4 from ios6 to ios7. All of a sudden, my screen crashed and is now in a flashing white state with lines. I've reset the settings multiple times and the flickering has not disappeared. Please help

I recently updated my new iphone 4 from ios6 to the current ios7. It has been in use for a few days now and all of a sudden the screen crashed to a white display with lines. I have reset it a couple times but there has been no improvement in reducing the screen flicker. Please help

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

How to get the values multiple times for the specified element - ABAP IXML.

Hi all,
         i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values. here is the sample xml,
<View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
<AbstractView.InboundPlugs>
<InboundPlug name="ip2">
<ParameterizedFeature.Parameters>
<Parameter name="ippara2">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
<InboundPlug name="hi">
<ParameterizedFeature.Parameters>
<Parameter name="hipara">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
Here i need to store the following values in internal table, the element to get the values are,
(1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
The output will be of 2 records & values should be
Inbound plug name = ip2
Parameter name    = ippara2
Parameter type      = binary
2nd record
Inbound plug name = hi
Parameter name    = hipara
Parameter type      = Visibility
These 2 records should be in internal table and then i will be passing to database table...
Can anyone provide me the code for the above......
Thanks in advance,
Vishnu.

I didn't get ur requirement..
As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
XML ABAP - may b helpfull
Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

MC placed multiple times and given same instance name?

Hi everyone, I am pretty new to code in flash.
I am mostly used to use object oriented programming, but in flash I'm doing everything in one frame.
I am making a car game. Kinda GTA style, but very simple. You are a police car, and you chase a theif through a city.
The theif uses ground nodes to know where he can drive, and where he can turn.
basically, below is the stage. I have placed these objects directly onto the stage, and given some of them instance names.:
|      O
| O ©
|            _______________________
|            |
|            |
|            |
|            |
|      ^     |
|      |     |
|     X     |
The © is a MC named node_switch.
The O's are the two objects of the same MC, which both are named node_stop
The X is the theif (mc), and he is driving upward along the road.
When theif hits node_switch, he will look up,down, left and right if any node_stop is placed.
This is done with hitTestObject. the theif has invisible "beams" in all 4 directions, inside it's MC.
The problem is as following:
When multiple nodes are placed on the stage, the theif only collides with one of them.
As I said, they have the same instance name.
Is there a way to be able to place them directly on the stage, give them all the same instance name, and make a for loop where it goes through all of them and checks collision?
Edit:
Or is it maybe possible to place them directly on the stage, give them instance names such as "node_switch01", "node_switch02", and then check for them all at the same time in a for loop, or in some other way? there will be lots of nodes, so...

If you name them all differently you will have an easier time of it. To loop thru them with the naming convention you suggested you can use the bracket notation, though it would be easier to get rid of the leading zeroes...
for (var i:uint=1; i<=numNodes; i++){
     if(thief.hitTestObject(this["node_switch"+String(i)]){
          // don't go this way

Re: Running the same (Forte) application multiple times -for different

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Using multiple timer in the same SessionBean

Hello,
Is it possible to use multiple timer in the same Stateless Session Bean. In my application a user can schedule some task to execute. To do so I was thinking of creating a Session Bean which would create calendar timer on user request and, when one of the timer expires, retrieve the task to execute thanks to the information stored in the timer.
When I tried the solution explained above, it seems that the @timeout method is synchronized on 1 timer. For example if I create a timer that will be executed every 10 seconds and another one executed every 30 seconds, the timeout callback is called every 30 seconds but 4 times.
My code looks like that :
@Stateless
@LocalBean
public class TimeManager {
    public void onUserRequest(ScheduleExpression expression) {
        Timer timer = timerService.createCalendarTimer(expression, timerCfg);
    @Timeout
    void timeout(Timer timer) {
        logger.log(Level.INFO, (String) timer.getInfo());
}Is there a way to do what I want?
Thank you

This doesn't make any sense to me. If i were to write a bunch of schemas for a particular applicaion, would
I have them all in the same namespace? You would normally have one schema that describes the information model associated with the one namespace that the different documents in your application use.
If so, why can't I load more than one in the same name space?The parser chooses the schema based on the namespace alone. There is no other information used to decide which schema to use, so you can only have one schema for the namespace.
They all have different root elements.You can have different root elements in the one schema.
I don't even need the namespaces, but I can't
figure out how to get rid of them (the schema isn't valid with out them according to XML Spy). You can set the schema explicitily before parsing, but not (AFAIK) set after parsing has begun, except by using the mapping of namespace to schema location.
I have also tried to use the external-noNameSpaceSchemaLocationproperty, but it doesn't seem like you can pass in an array of schemas to that one. It only expects a
String as the Object you pass in to setProperty. Yes, you can only validate a document against the one schema.
So, how can I load all my schemas so I don't have to reference them in the XML documents? Either combine your schemas so you have one schema for your namespace that validates elements which are defined in that namespace (the formal/correct way of doing it), or construct a filter that inserts a PI to point to the schema once the root element is opened (the pragmatic/bit of a hack way of doing it).
Pete

How can I have use the same div ID multiple times on the same page?

Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
     width: 300px;
#product-container-2 {
     width: 300px;
#product-container-3 {
     width: 300px;
#product-container-4 {
     width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!

Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How to play one clip multiple times at the same time?

I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
myClip.setFramePosition(0);
myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
Edited by: andrasz on Feb 27, 2009 12:37 AM

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

Bapi_po_create1 is giving same system messages multiple time in the joblog

Hi Experts,
Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
can u plz suggest how to prevent these multiple appearances of same messages.
I am pasting the code below whn i ran this program in backgorund job log is having the messages.
Date       Time     Message text                                                                 Message class Message no. Message type
08/06/2009 08:11:53 Job started                                                                       00           516          S
08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY)        00           550          S
08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
08/06/2009 08:11:54 Source not included in list despite source list requirement                       06           722          E
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
08/06/2009 08:11:55 Purchase order still contains faulty items                                       MEPO          000          E
08/06/2009 08:11:55 Job finished                                                                      00           517          S
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PM

HERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
REPORT zzztest.
DATA :    lwa_bapimepoheader TYPE bapimepoheader
         ,lwa_bapimepoheaderx TYPE bapimepoheaderx
         ,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
         ,lwa_bapimepoitem TYPE bapimepoitem
         ,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
         ,lwa_bapimepoitemx TYPE bapimepoitemx
         ,li_conditions TYPE STANDARD TABLE OF komv
         ,li_return TYPE STANDARD TABLE OF bapiret2
         , n TYPE c
PARAMETERS: p1 TYPE c AS CHECKBOX.
IF p1 = 'X'.
lwa_bapimepoheader-doc_type = 'NB'.
lwa_bapimepoheader-purch_org = 'NA00'.
lwa_bapimepoheader-pur_group = 'C02'.
lwa_bapimepoheaderx-doc_type = 'X'.
lwa_bapimepoheaderx-purch_org = 'X'.
lwa_bapimepoheaderx-pur_group = 'X'.
lwa_bapimepoitem-po_item = '10'.
lwa_bapimepoitem-material = '000000000000020111'.
lwa_bapimepoitem-plant = 'CA01'.
lwa_bapimepoitem-vend_mat = '1000'.
lwa_bapimepoitem-quantity = '10'.
lwa_bapimepoitem-orderpr_un = 'M'.
lwa_bapimepoitem-no_more_gr = 'K'.
lwa_bapimepoitem-agreement = '4600000095'.
lwa_bapimepoitem-agmt_item = '10'.
lwa_bapimepoitem-pricedate = 'X'.
lwa_bapimepoitem-price_date = '20071030'.
lwa_bapimepoitem-no_rounding = 'X'.
APPEND lwa_bapimepoitem TO li_bapimepoitem.
lwa_bapimepoitemx-po_item = '10'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-po_itemx = 'X'.
lwa_bapimepoitemx-material = 'X'.
lwa_bapimepoitemx-plant = 'X'.
lwa_bapimepoitemx-quantity = 'X'.
lwa_bapimepoitemx-po_unit = 'X'.
lwa_bapimepoitemx-orderpr_un = 'X'.
lwa_bapimepoitemx-acctasscat = 'X'.
lwa_bapimepoitemx-agreement = 'X'.
lwa_bapimepoitemx-agmt_item = 'X'.
lwa_bapimepoitemx-pricedate = 'X'.
lwa_bapimepoitemx-price_date = 'X'.
lwa_bapimepoitemx-preq_no = 'X'.
lwa_bapimepoitemx-preq_item = 'X'.
lwa_bapimepoitemx-no_rounding = 'X'.
APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
DATA: lo_msg_handler TYPE REF TO cl_message_handler_mm.
CALL METHOD cl_message_handler_mm=>get_handler
    IMPORTING
      ex_handler = lo_msg_handler.
lo_msg_handler->remove_all( ).
lo_msg_handler->cleanup( ).
CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
       EXPORTING
         poheader   = lwa_bapimepoheader
         poheaderx = lwa_bapimepoheaderx
         testrun    = 'X'
       NO_MESSAGING = c_x
       NO_MESSAGE_REQ = c_x
         no_authority = 'X'
       IMPORTING
         expheader = lwa_bapimepoheader
       TABLES
         return     = li_return
         poitem     = li_bapimepoitem
         poitemx    = li_bapimepoitemx
         conditions = li_conditions.
ENDIF.
Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM

Tries to connect multiple times at the same time a...

Tries to connect multiple times at the same time after trying to reinstalling software.

Hello,
Assuming that you use a Web version (this information MUST be provided in any post), you have 2 ways to run reports:
1. the Run_Report_Object built-in
2. the Web.Show_Document() built-in
Francois

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

If you want a relevant answer you may have to elaborate on what you actually mean. Posting screenshots might help, too.
In any case multiple conversions of an image are not advisable in general.

Does QueueSender send same object multiple times to the Queue

Hi ,
Does the QueueSender sends the same message object multiple times to the queue ?If so then the same will be send multiple times right. why do the client retain same object for long time if the expiry time is 0, Please some one help on this .
Thanks
Maruti

Little_Pale_Face wrote:
Michel,
Just to clarify, I can drag duplicates to an album but it only appears once - so it's not actually adding to the album. The question, as I understand it, is that PSE doesn't warn you whereas it use to in PSE 3..
Ok, that clear now.
If I remember correctly, the format of the database for PSE was changed around version 4. So the error message that Beachcomber was seeing may have been generated by the old database system.
Version 4 used Microsoft Access as the database engine, not sure about version 5. Anyway I am sure that from version 6, the sqlite database engine was used.

Restricting users to login multiple times on the same machine..

Hi everyone,
Is it possible to restrict the users to login multiple times on the same machine...did someone implemented this kind of process.Please help me how can i achieve this or any suggestions.
Thanks in advance.
Phani..

Hello,
I decided to answer you in the original thread - Identify currently active users – as I believe that the outline background of the issue is important to better understand it.
Regards,
Arie.

Does Safari use up bandwidth if I leave it running in the background with zero tabs open? Do I have to quit the application each time I am done to avoid exceeding my internet usage/host quota?

If I leave Safari running in the background with zero tabs open, does it still use up bandwidth? Do I have to quit the application each time I am done to avoid exceeding my internet usage/host quota? I'd rather not have to since quitting the application and restarting it when I need to will quickly become tedious, but if that saves me on bandwidth usage, I'll do it. Thanks!

iStat pro is another good means of checking your Mac's activity. Set it up within Dashboard. It is a free facility.
iStat pro for Mac - CNET Download.com

Open the application multiple times in the same instance

Similar Messages

Maybe you are looking for