Open the Reader with the same instance

Hello,
we need the possibillity to open different PDF files in the same Window. We use A-Reader XI

Not possible.

Similar Messages

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem.

I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem. Uninstalled it. Still have the problem with Firefox.
== This happened ==
Every time Firefox opened

How about if you right click on the PDF and select Save Link As..., and then open it locally from within Reader? Does it work ok then? That might be a workaround until the issue within the browser is resolved.
Rob Jaworski
Intl Program Manager

Two users opened the same file at the same time with file on Win2K Server

I just had a problem with a file that could not be saved. After a little investigation I discovered that two users had the same file open at the same time. This is with both users using InDesign CS2 and saving to a Windows 2000 Server. Any ideas how this even happened? The only thing I can think of is if they both opened the file at the exact same time but even that I doubt. I guess the more likely possibility is that the user on 10.5 (which we have had a lot of problems with, it's hard to tell how many of them are CS3 problems (yes CS3) and how many are Windows 2003 Server problems) had InDesign CS2 flake out and not tell her the file was open. Has anybody else seen this? The other user was using 10.4. Both computers have the most recent updates for the OS and for their various adobe products.

I have videos on mov file and my quick time player does not play them.
The MOV file container is the generic QT file container. Any audio and video data compatible with the computer system used to create the file can be placed in the MOV file container. Unfortunate, other systems cannot play the file unless they too are configured with the same components as those used to create the file. The normal procedure here is to use the Finder "Info" or alternative media play "Inspector" window to determine what codecs were used to create the original file and, if they are available for your Mac, install them on your system for playback use. Also be advised that some "legacy" codecs may require playback in the QT 7 Player for proper QT support.
I opened with other players, there is no sound. Then I opened the same file on my windows 7, it plays perfectly with the sound and everything? What is the problem?
This would indicate these players either access your QT codec component configuration which does not include the required codec or the app has its own built-in codec support which does not include the required audio codec but you Windows 7 media player is configured with the required codec support. This may incidate the use of a really old codecs that may or may not be available/supported on a Mac any longer.

Open the same raw file in PS5 with two different White Balance settings

I'm trying to open the same Raw File in PS5 with two different White Balance settings. One setting "as shot" the other in "daylight", then blend them. The tutorial I'm watching says to "stack" the images. The tutorial shows one White Balance setting as the "Background" layer and the other setting as "Layer 1". I don't know how to do this and the tutorial is not specific. Can anyone either point me to a step by step instruction or offer some assistance?

Also look at the "Snapshots" feature of Camera Raw itself. It allows you non-destructively to keep multiple sets of settings for a single raw file.
Learning about it far exceeds the scope of what can be done in this particular forum. I would recommend this book as essential reading:
http://www.amazon.com/Real-World-Camera-Adobe-Photoshop/dp/0321713095/ref=sr_1_1?ie=UTF8&q id=1313502199&sr=8-1
Additionally, there's a dedicated Adobe Camera Raw forum:
http://forums.adobe.com/community/cameraraw
Wo Tai Lao Le
我太老了

If I open the same document with two different apps on my iPhone does the document get saved twice?

For example, I chose to open a .pdf document I received as an attachment with Adobe Reader or iBooks, and now the document is available anytime I open Adobe Reader or iBooks. My question is if these applications are able to open the document anytime they want then the document must be available somewhere on the device, where do they get saved? And do they get saved twice if I opened the same document once with iBooks and once with Adobe Reader?

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Adressing multiple copies of Movieclips with the same instance name

Is it possible to iterate through MV copies with the same instance name? It would be very useful for my project.

you can copy movieclips with the same instance name but you'll only be able to easily control (with actionscript) the last created instance. the rest will be difficult to reference.
although, if the only movieclips attached to the parent are the ones you are interested in and you want to do that same thing to all of them (say rotate them all), you can do that without giving them distinct names.

When i open an irc link with a channel name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end

when i open an irc link with a channel name that contains "~" at the end firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end
http://img835.imageshack.us/img835/2856/clipboard05nq.jpg

I can not open the image, but I can say something in general about the tilde. 
The tilde "~" is an unreserved character and therefore it can be replaced by its percent-encoded form "%7E" inside a URI without changing meaning. See 
http://en.wikipedia.org/wiki/Percent-encoding 
According to section 2.3 of RFC3986 we should prefer the unencoded form so this behavior seems to be a bit out-dated.

How can I avoid opening the several instances of the same form?

Hi Friends,
I have a MDI form with a menu. When open a form by clicking the menu twice, it is opening two instances of the same form. It is eating up all resources of my memory.
How can I avoid opening the multiple instances of the same form? I want the activate the form which is already open instead of opening the new instance of the same.
Anybody knows solution please help me.
Thanks
Gopinath Kona

Hi,
U must be using the built-in OPEN_FORM in your code. Instead of that, check it using the following code....
IF ID_NULL(FIND_FORM('form_name')) THEN
OPEN_FORM('form_name with the path');
ELSE
GO_FORM('form_name'); --shifts the control into the form which is already open.
END IF;
hope it helps...
null

Iphoto shows two photo libraries with the same name, one in small letters the other in all capital letters. they both open the same library and the only one in my computer. How do delete the capital letrs one as the one in the pictures folder is in

In my iPhoto application when I select switch libraries It shows 2 libraries with the same name, but one has the name is in Capital letters.
They both open the same library which is in the Pictures folder. This is the only library I can see and the name is not in capital letters?
How do I get rid of the one in capital letters

What is your iPhoto version?
when I select switch libraries It shows 2 libraries with the same name, but one has the name is in Capital letters.
In the Library Chooser Panel look for the pathes to the two duplicate libraries. You will see the location of the libraries in the path bar at the bottom of the window when you select one of the libraries. Does it show both libraries in the same folder?

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

Unable to copy database with different name in the same instance

I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang

Adobe Reader will not open documents. Will only open the same document regardless which document I select.

Adobe Reader will not open documents. Will only open the same document regardless which document I select.

Instead of writing the exact sentences twice, how about some details?

How to use multiple profiles within the same instance of Thunderbird

About a month ago, I had Thunderbird configured with three profiles,
and all three could be used within a single startup/instance of
Thunderbird. That PC is now gone. I have re-configured the three
profiles on a new PC, but am having trouble making all three
useable within the same instance of Thunderbird. Can you help?
Both PCs are/were Windows-7 64 bit.

Thunderbird only opens on the default if one profile
or
if Profile Manager is instructed to ask at startup it will allow you to choose which Profile to open else it opens on the last Profile used..
So it shows one Profile at a time in one instance of Thunderbird.
However, one Profile can have many mail accounts.
eg: I run 4 mail accounts in one Profile.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

How can I set the finder window to open the same way every time?

Everytime I open Finder it goes back to it's default view which is just too small, but I want to set the finder columns and window so that they open the same exact way every single time. I'm tired of resizing everything.
Currently I have to resize every window and column everytime and I think my work is much slower then when I was on Windows because of it.
Is there a setting, script, file, patch, anything, is there absolutely anything I can do to actually control the Finder views and make them adjust to MY criteria and stay that way...

That is a big negative. That does absolutely nothing other then close my window, next time the finder window is opened then the column widths are small again.
In Windows Explorer all your windows are customizable, how do I do this with Finder?

Open the Reader with the same instance

Similar Messages

Maybe you are looking for