Open the URL for self-registration

Dear Experts,
If I open the URL address of the self-registration form in my computer at work (when I have the SRM implementation), the form is open and I can fill it and send it to the self-registration system.
I tried to open this URL address from home (like a vendor that want to register to the system) and I couldn't open the page.
I got the URL address from:
Transaction SE80.
BSP application and enter ROS_SELF_REG.
Pages with flow logic.
Double-click on Main.htm.
Properties tab page.
The field at the bottom contains the URL.
Please advice.
Best Regards,
Eyal Weinreb

Hi,
What is the error message when you open it from outside of firewall?
I guess this is just your network design issue.
Usually supplier calls public web URL and a dispatcher maps/redirects to internal host.
Regards,
Masa

Similar Messages

  • What is the URL for Nightly Start Page i want to use that in my Open a new tab?

    How can i find the URL for the new Nightly start page as i want to use it in the new tab so it is the same as the home page . i use the nightly start page as home page too

    hello caseyvan, "about:home" is the url for the default firefox/nightly start page. you can set that as a new tab page when you can enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up) and search for the preference named '''browser.newtab.url'''. double-click the entry & change it to any site you want to show up on a new tab.

  • How can I see the URL for a page opened in the new version of safari?

    Sometimes I like to copy the URL for an article I find on the web.  The new version of Safari doesn't seem to show the URL.  How can I see it?

    Just click inside the url address bar. Full url address highlighted, will appear.
    Best.

  • How can I stop my Firefox browser from preventing Click Earner, a program that opens email ads on safelists, from opening the URL's in the email ads?

    Hello fellow-users of Mozilla Firefox,
    I send email ads using 20 different safelists every day. To get credits for sending those ads I click email ads sent by other subscribers.
    Since early this year I've been using Click Earner -- http://www.clickearner.net/ -- to help speed up this task. Click Earner "fetched"
    the emails from each safelist and opened each URL advertised in each email. This was a very quick job and all I did was close each tab
    displaying the URL. Credits for clicking the URL were added to my safelists accounts.
    Since a week ago, without me doing anything at all, my Click Earner stopped opening the emails automatically as was the case for
    several months since I started using it. Click Earner support claimed Firefox prevented the program from opening the URL in a new tab each time it fetched an email ad. True enough, yesterday when I watched Click Earner in action I saw a pop-up from Firefox saying something like "Firefox prevented..." I couldn't read the rest as the pop-up disappeared immediately. And that was the only
    time I saw it.
    Right now I have to open each URL manually to see the ad and earn credits. This is a very slow process, just the same as when I open the emails in my gmail account. It's useless for me to subscribe to Click Earner. And it takes forever for me to earn credits from all the safelists.
    I'd appreciate it very much if any one of you folks would help me overcome this glitch. I look forward to hearing from you and thank you very much in anticipation.
    Regards,
    Tom Graciano

    You could try turning off Firefox's pop-up blocker.
    "3-bar" menu button (or Tools menu) > Options > Content
    There you will find a checkbox for "Block pop-up windows". Assuming it's checked, uncheck it.
    Does that return to the behavior you want?

  • Auto approval for self registration request in OIM 11G R2

    Hi all,
    We have a requirement where we want end users to be able to self-register without needing any sort of approval. We are using OIM 11G R2 with the latest patchset.
    The way to do it in 11G R1 is explained in the following document:
    [http://docs.oracle.com/cd/E21764_01/doc.1111/e14316/unauth_selfservice.htm#BABFEIBF]
    But now that R2 does not have any request templates, we are not sure how to do this. Any help will be greatly appreciated. Thanks for your time.
    -sandeepc

    refer this.
    Configuring Auto-Approval for Self-Registration - Fails due to Organisation

  • I have a pop up which I can't get rid of which states: "There is no application set to open the URL ximadpzl://save_ximad_token----/"

    I can't get rid of a message which keeps popping up which says:
    There is no application set to open the URL ximadpzl://save_ximad_token/(etc)
    I have no idea to what they are referring and I can find no application which satisfy this requirement. How do I get rid of this message? It won't go away. I have tried turning off the computer, closing Safari, etc.

    All of these suggestions (delete caches, restart, terminal commands, etc) do nothing to actually LOCATE the problem. They are just standard purging processes, and they have all failed to achieve resolution.  And it is NOT Little Snitch either (tried turning that off and nothing changed).  All these forums on this matter have been speculative and useless.
    Ladies and Gents... I have found and isolated the ACTUAL PROBLEM.  It is a Safari Extension that is doing it... specifically "VideoCatcher 5.3.8" which for me was installed with MovieSherlock.  The extension adds the ability to download YouTube movies directly from Safari (by showing a small download button next to any embedded movie). When I remove that extension, all the annoying pop-ups go away.
    MovieSherlock is not the only utility that does this however. There are several YouTube downloaders out there that ALL install an extension that detects YouTube videos on the page. I bet my hat that many (if not all) of you who are experiencing this pop-up issue... have installed one of those downloader utilities.
    So, the solution is simple: disable that extension. If you need to download a YouTube video from a page, either temporarily enable that extension again as needed, or leave the Safari integration disabled and launch the actual utility itself and enter the URL into it for your download.
    I would expect that MovieSherlock and the other YouTube downloading utilities will need to update their extensions (soon?) to deal with Yosemite's new browser script management.
    PROBLEM SOLVED.

  • I am trying to use my IPAD to video students in my conducting class, then email them the video for self evaluation.  However, many of the video clips are too long to email.  Is there anyway to compress the video clips and still email them so they can view

    I am trying to use my IPAD to video students in my conducting class, then email them the video for self evaluation.  However, many of the clips are too long to send.  Is there a way I can compress the clips and still send them via email so they can open and them using Quicken?
    Muzakmn

    It depends on the clips' content, their current format, and how much you would need to compress them, but in most cases and with most email systems, it's difficult to impossible to compress a clip enough to be able to get it through the attachment size limits of most email providers and still have the video be comprehensible. You'll probably need to find a web site or other method where you could post the videos for download by the students.
    You can try compression and trimming, though, and see if you can get the video small enough to email. An attachment often has to be 3MB or less to go through, though it depends entirely on the email systems on both ends. If you look to the right under "more like this" you'll find similar threads on the subject.
    Regards.

  • Approval Workflow for Self Registration

    Hi ,
    I have a requirement where I have to develop an approval workflow for self registration.
    My requirement is If the user type is Employee the user must not go through approval, but if the user type is contractor they must go to some admin user for approval.
    How can I achieve this.
    Regards

    Hi,
    You can refer this link "Create a Custom Approval Process for Self Registration" it might clear your doubts. Also you can create rule as said in below post. For that you can refer "http://codigoctm.files.wordpress.com/2012/11/lab-06-access-policy.pdf".
    Regards,
    Sunil

  • There is no application set to open the URL sims3://download/?ofbId=OFB-SIM3:38987

    There is no application set to open the URL sims3://download/?ofbId=OFB-SIM3:38987&encryptedAuthToken=INbCdD6FAe0ND8AcYXJcX FPun4EYsDLeKldH2eNztR1XM90460ejXtN1cD4EpASBNtF4hAJPW6JqlFo0RufA74fgIyqlL5_8Pq-22 vEdrXimqDC5-8U0Uxq1jhl-1b_-w-IkGUio9nplWF_9sUUzTQ...

    I try to download the game from EA sports, which I payed for, but that URL comes up. After that it just wont work so I cant download the game or anything.

  • While listening to a podcast on my iPhone I can e-mail the podcast ID. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer.

    While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?

    Same here. I just posted a question too.

  • Getting this Error: There was an error opening the database for the library

    I keep getting an error with start up (There was an error opening the database for the library). The command + option - double click does not provide options for database rebuild or repair, just the same error message.
    I have been using Aperture 3 since it was released without problems until now. The library size is about 450GB.
    Has anyone found a file or something within the library that was corrupt? Or any manual method to fix the issue?

    I have had the same problem as you have had, but I managed to restore. After having upgraded to 3.1, Aperture performed a irreversible update of the library. I then made a backup to a vault (which also was was updated). So far so good. A few days later when opening Aperture I got again the dialoge box saying Aperture had to update the library to 3.1 - and then came the error message. When trying to open the backup vault directly, I got the same message.
    What I did was opening another library (creating a new one will also do). Aperture was now in a state where it was running with a few pictures in the library. I then performed a vault restore from the 3.1 backup. Fortunately, this did the job.
    I actually taught that both the library and the vault was corrupted, and I am really happy that I managed to restore. Tomorrow I am going out to buy several new hard disks for my new multiple vault backup strategy to cope with the new threat: Aperture library self-corruption.

  • What is the URL for the keynote help link in the keynote app

    what is the URL for the keynote help link in the keynote app on the ipad. I have a firewall in place to keep student from accessesing unwanted/restricted information, where can I find the url/ip address to unblock this site. Thanks

    Hi Ravi,
    As such there is no path for directly opening Visual Composer from the Netweaver system (I suppose this is what you mean by the acronym nws). Visual Composer can only be opened by the URL as given by Rahul:
    http://<hostname>:<port>/VC
    Bye
    Ankur

  • Could not contact the agent.verify that the url for agent is null.

    hi,
    i have a problem.can anyone make a solution?
    i have installed oracle 10g in vista os.when i tried to open the enteprise manager the page is loaded,i have entered the credentials.log in was successful.but the
    1.status of the database is shown as startup/shutdown
    2.status pending since unavailable.
    when i tried to startuo the system i provided the host credentials and database credential, then it is shown that "couldnot contact the agent.verify that the url for the agent is null".
    how could i solve it.
    moreover when i tried with command prompt the error is that emctl doesnt start.system 5 error occured.access denied.

    I believe currently you are using database control. If so, can you please check emagent.trc and emoms.trc files from ORACLE_HOME/host_sid/sysman/log folder.
    Also what is the value for EMD_URL in ORACLE_HOME/host_sid/sysman/config/emd.properties file.
    Regards
    Lai

  • There is no application set to open the URL

    Hello All,
    After updating to Yosemite 10.10.3 I am getting the below message when accessing sites like Youtube and any video site. The message is annoying and don't really know where its coming from. I tried changing safari agent to a previous version but it is still the same.
    please help.
    There is no application set to open the URL msvtdh://https%3A//www.youtube.com/?gl=GB&msauto.
    Search the App Store for an application that can open this document, or choose an existing application on your computer.

        Safari > Preferences > Extensions
        Turn those off and relaunch Safari.
        Turn those on one by one and test.

  • HT1349 I accidentally erased the URL for my homepage with safari in the preferences, can someone tell me what to put in there so when I click on the safari icon in my dock it will go there? thank you, kathy

    I accidentally erased the URL for my homepage with safari in the preferences so can someone tell me what to put in there so when I click on the safari icon in the dock it will take me to the safari page it had when I first got my macbook pro?

    Safari comes with the Apple website pre-defined, so if you want to use it as the homepage for Safari, open Safari menu > Preferences > General, and type "http://www.apple.com" (without quotes) on the homepage box. Then, close the Preferences window and Safari will be set up with this page

Maybe you are looking for