Open the web page

Hi
I am not exept in plsql..
How to open the web page in oracle pl/sql with procedure.
regards,
sasi

Hi,
There is a dedicated forum for PL/SQL questions, please post your question in that forum for a better/faster response.
SQL and PL/SQL
PL/SQL
Thanks,
Hussein

Similar Messages

  • Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

    Safari keeps giving  and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
    It only seams to have a problem with https sites.
    Any help would be appreciated

    The "s" in "https" indicates the site is a secure server--usually a site that will require a password.  Connections to secure servers can be blocked by parental controls.  Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)?  If so, check the settings to make sure they will allow the connection.

  • I started my ipad in wifi but didnt open the web page, what is the problem?

    i started my ipad in wifi but didnt open the web page, what is the problem?

    Your iPad is probably not connected to the Internet.

  • When Firefox 5 opens the web page is too wide for the window and only half is displayed. How can I correct this?

    The web page is offset to the right so that only the left half is visible in the Firefox window. As soon as I start to re-size the window (bottom RH corner) the page snaps into place and all is ok. It only happens when I launch the browser.
    I did not experience this with version 4.

    The web page is offset to the right so that only the left half is visible in the Firefox window. As soon as I start to re-size the window (bottom RH corner) the page snaps into place and all is ok. It only happens when I launch the browser.
    I did not experience this with version 4.

  • Safari cannot open the web page becauseit could not connect to the server.

    Hello, recently I have been trying to access a web page that I can only access if I delete the "www." in my browser before I hit the "go" button. If I do not delete the "www." I get the error message "Safari cannot open the page because it could not connect to the server. I have tried restarting my ipad 2 by holding down the home and lock button but it has not worked, I do have 7 tabs open right now but I dont think that would be a problem would it? I have full internet access so I dont think tap hat would be it.

    That didnt work :/ This website is hosted on a platform called enjin and I have noticed every enjin website is doing this to me so could it be something on there end? I havnt heard from anybody else who is having the same problem.
    The website looks different from what it did before this started happening to me, here is a screenshot of what it looks like now.
    [img]http://imgur.com/cWvR95e[/img]

  • Button Click not opening the Web page.

    Hi Experts,
    I am working on  a requirement to call an external web page on click of a button in the Opportunity page. I am able to achieve this by  calling the Window.open() in the details.htm page of the BT111h_OPPT. I am able to open the window on my first click of the button. The second continuous click of the button is not opening the window. But if i click on any other button on the same screen and then click this newly created button is opening the new window. Can you please provide your views in what could be the reason for this behaviour.
    Regards,
    Sudha.

    Hi Sudha,
    We had a similar requirement. You can make the URL unique everytime and that should resolve the same.
    Thanks,
    Senthil.

  • Error while opening the web page

    Hi,
      i am trying to start the srm login page using web. with the service BBPSTART..its not opening it shows ' Firefox can't establish a connection to the server at xxxx.xxx'.
    what might be the problem...
    kindly help me with it...
    thx.

    Hi,
    Its OK.
    That is why I have already written that you have to take your Basis Guy Help to find out whether he has assign the port to the SRM Server and has maintained the entry in the table.
    Take help of your Basis Consultant
    Regards,
    Sachin

  • I need to open up the same web site in two separate tabs. Since I upgraded to Firefox 6 when I try to open the web page in a new tab from the list in the drop down in the address window it only gives be the option to switch to the tab already have open.

    When I go the drop down from the address window, rather than showing the URL of the website I want open in a second tab it says "Switch to tab." But I don't want to switch to the tab - I want to open a second tab on the same URL. If I want to open it a second time I have to manually key in the address. Is there some way to turn this off so I can open up the second tab using the same address from the drop down? I have always been able to do this with previous versions of Firefox.

    '''''"Is there some way to turn this off so I can open up the second tab using the same address from the drop down?"'''''
    You can install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/switch-to-tab-no-more/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Why wont a link open the web pages in 3.6.13?

    os snow leopard
    hyper links when clinked dont open in firefox 3.6.13

    I knew AVG Safe Search couldn't be the problem because I had uninstalled it! Guess what. It was uninstalled, all right, but the add-on to Firefox was still there, disabled. That uninstall was grayed out.
    I re-enabled it and disabled it, this time it said it would be uninstalled the next time I restarted Firefox. So I did that. Nothing changed. However, this time I noticed that just above the restart message was a place to click restart. That restart worked!
    Some people just know how to write obtuse software messages.

  • I have safari in my iPad but bookmark is not working. I can not book mark any things.  How do I get back my bookmark working so that I can open the web page I have already booked marked.  Thank you for your answer

    I have iPad 2.
    The safari bookmark was working yesterday.  Today book mark is not working.  I can not book mark anything. 
    Did I do anything to prevent stopping bookmark to store?  Please help me how to get back working my bookmark.  Thank you.

    See if this works.
    Quit the Safari app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Links on pdf page download the web page it is suppose to open?

    Hi - Never had this happen before.  Using Word 2007 and save as 'pdf'.  The links are clickable, but . . . they start
    downloading the page and add it to the pdf file, instead of just opening the web page that the link is for.
    I tried to remove link in pdf and re-create it with link tool, but the same thing happens.  Any ideas?
    I've been doing it for years and this has never happened before (with the same programs).
    Thanks for any help.

    To helpthisrookie:
    Can you connect to the same page(s) using another browser?
    See also this thread (assuming you have Yosemite)
    Secure Connection Problems after Yosemite update

  • My  ipad is connected to the wi-fi but still wont open any web pages. what should I do?

    I need help with using the internet. my ipad is connected to the wi-fi but there's still a problem opening the web page.

    Reboot your router by powering it down for 30 seconds. Power off your iPad.
    Power up your router and make sure it completes its startup and acquires a good connection to the Internet. Then power up your iPad. Go to settings > Wi-Fi then select your Wi-Fi network and tap on Forget this Network. Then let the iPad try to connect again. Be sure any required password is entered correctly.

  • Using the Motorola Atrix w/ the laptop dock, when I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up so pages open the right size?

    I'm using the Motorola Atrix smart phone with the Laptop Dock. When I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up the Firefox browser to open the web pages the right size in the first place?

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • I can't see the iViews or jpegs which I added into the Web Page with WPC

    Hello,
    I'm using Netweaver 2004's.
    I created a Web Page in the Web Page Composer and in the Site Navigation a Navigation Node to this Web Page.
    Then I added a jpg and an iView to this webpage.But I can't see this iView or this jpeg if i open the Web Page.
    I'm superadministrator and i have the rights to watch this page
    But if i click "Edit Page" i can see everything.
    What can be wrong ?

    Tobias -
    I think Ursula is on the right track here.
    I was having the same issue (not seeing iviews in the page - even in edit mode).
    I think the solution (somehow) is configuring the initial permissions in the Security Zones.
    The only problem is that the documentation is incorrect. The correction is in an SAP Note.
    Below is the configuration (correction is bolded!):
    Documentation says:
    Defining Permissions for Security Zones
    1. Navigate to Security Zones &#8594; com.sap.nw.wpc &#8594; <b>wpc (not pagebuilder!).</b> (The documenation says com.sap.nw.pagebuilder. This is incorrect!)
    2. Define permissions for Web site owners and, if necessary, for authors.
    a. From the context menu of the medium_safety folder, choose Open Permissions.
    b. Give the wpc_editor_role role - or a user group - the permission End User.
    You can leave the default entry for the Administrator column as None.
    c. Choose Reset Child Permissions.
    d. Choose Save.
    3. Define permissions for users.
    a. From the context menu of the no_safety folder, choose Open Permissions.
    b. Give the everyone group - or another user group - the permission End User.
    You can leave the default entry for the Administrator column as None.
    c. Choose Reset Child Permissions.
    d. Choose Save.
    I made this change, and now I can see iviews in the page.  I won't swear this is the solution, but that is the only change I have made lately.
    Hope this helps.
    BTW - this <u><b><i>corrected</i></b></u> setting of the security zones corrected other problems I was having. Before I did this, a user with the WPC role - but not super admin - could not edit pages from the published page (the Edit Page link at the top of the page in runtime). Now the user can.

  • It was updated and i can't see the web page. It is only a white page. Android for tablet

    I was able to see a webpage which starts with https. However the browser was updated and 1 can't see the web page anymore. I can see it in chrome but I need Firefox due to the plug ins.

    I installed FLASH PLAYER and it doesn´t work. Everything started when Firefox was installed automatically. Does anybody knows how to install a complement in google chrome for android (it is a scanned document) since i could not open the web page in firefox or dolphin, I used chrome but now I cannot see the content. I already installed PDF reader. I do not know how to enable the plug in. I read that I should go to
    chrome://plugins but this page doesn´t not exist.
    How can I enable it in a tablet android?
    Thank you in advance.

Maybe you are looking for