Open Transfer Requirements for Mvmt 261 in LL01

Hi all
We recently made a change to our warehouse structure by reassigning storage types from an earlier storage location A to a storage location B. These storage types involve Production Supply areas (PSAs) and also storage areas for raw materials.
After the change we have ended up with roughly 2000 open transfer requirements related to movement type 261 GI to order. They all show up as critical processes in LL01 (Warehouse Activity Monitor)
Does anyone know what could be the reason
Thanks a lot

Before you change your structure of wharehouse you need to clean up all the pending document otherwise you will be in trouble like you have now.
so please clear all the document first.

Similar Messages

RE: Auto-closed all open Transfer requirements

User sometimes uses LT10 to move stock from Receiving area to bin.
Because of this, there are many open Transfer requirement.
Is there a way the system will closed off the transfer requirement?
In which User exit can this routine be setup?
Thanks
bye

One way of doing this is by marking open transfer requirements as completed in transaction LL01 (warehouse activity monitor).
To run the warehouse activity monitor, you will have to define the variants in customizing.
When you get this report running, double click on the line for 'Open Transfer Requirements'. In the next screen, click on the button 'TR status deliv. completed.'
Another was is to do this individually in transaction LB02.
To my knowledge, there is no user exit to automate this. Perhaps you can write a custom BDC on LL01 transaction and run the program on regular intervals (PS this way you may end up closing genuine or un-processed Transfer Requirements as well!)
Regards
Baseer

Procedure for Clearing Open Transfer Requirements & Posting Changes

Dear All,
With my present SAP System, both IM & WM Stocks are zero for a given Sales Order / Line item. But there are pending Transfer requirements & Posting changes due to the fact that the users have not completed up until the TO Confirmation Stage. Now that the stocks are in harmony in both IM & WM, what do we do to the open transfer requirements and posting changes. What is the best practice procedure for the above scenario.
Appreciate an advice for the above scenario
Thanks
Shabeen Buhary

Hello,
Write a program which will call transaction LB02 for TR & LU02 for Posting change notice (PCN).This program will make status of these TR & PCN complete.
I already used the same.
Regards
Prashant

List of Open Transfer Requirement(TR) - Reg

Hi all
I want to know about report : List of Open Transfer Requirement(TR). Where i have to get the details. ie. Which table i have to get it? Can any one explain that reports briefly? Any Standrad T.code is there ?

activate the warehous activity monitor t-code LL01. see help.sap.com for details on the how-to.

Transfer Requirement for Goods Receipt Item

Hi All,
We are trying to create Transfer Order for Goods Receipt items using an ITS mobile application.We are using the function module L_TO_CREATE_TR to create Transfer Order by passing the Transfer Requirement from the Goods Receipt as an input to the function module. Our requirement is to create one Transfer Orde per Goods Receipt item. We need to create Transfer Order for the items simulatneously from different terminals.Since we have only one Transfer Requirement for the entire Goods Receipt document, we are not able to create Transfer Orders simultaneously because of the system lock (Transfer Requirement is locked).
Is it possible to create separate Transfer Rquirement for the individual items in the Goods Receipt via customizing/User exit.
Your guidance in this regard will be great help for us.
Regards,
Shaju

Hi Dirk,
Thank you for your reply.
Our enduser will be using handheld device for Transfer Order creation. The user will pick the GR item material from one storage type (902) and the Transfer Requirement will be locked at this moment.Later while placing the SU in destination bin the user will scan the destination bin and the Transfer Order will be created at the time of scanning. Till the completion of the entire process the Transfer Requirement will be locked and no one else can pick the materials of the same GR from 902 storage type.
We are trying to create Transfer Requirements for each Goods Receipt Item and we are not able to find any user exit in Goods Receipt Creation or any customizing option.
Can you please check and help us to resolve the same.
Regards,
Shaju
Edited by: shaju tv on Apr 5, 2010 11:40 AM

List of Open Transfer Requirement(TR)

Hi all
I want to know about report : List of Open Transfer Requirement(TR). Where i have to get the details. ie. Which table i have to get it? Can any one explain that reports briefly? Any Standrad T.code is there ?

Hi Muthu,
You can use LB10 standard transaction to get the list of open TRs. You can start to process them in this transaction.
TR-tables: LTBK (header), LTBP (item) - you can use LTBK-STAU to sort out cmpleted&partially processed TRs.
BR
Csaba

Transfer Requirement for Movement Type 262 (Cancel With Ref to Reservation)

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 (Cancel With Reference to reservation) ?
When i execute a movement type 262 (Cancel with reference to Order), the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Transfer Requirement for Movement Type 262 to Reservation

Hi Experts,
it is possible to configure the system to create a Transfer requirement for movement type 262 to reservation?
When i execute a movement type 262 to Order, the system creates a Transfer Requirement, i can process it in transaction LB12. Now i am using the movement type 262 to Reservation, but the system does not create a transfer Requirement.
I am using SAP ECC 6.0.
Thanks in advance,
Alejandro López.
Edited by: Alejandro López on Feb 28, 2011 1:55 PM

Hi Alejandro,
Can you clarify what process you are performing by this comment? .. "_Now i am using the movement type 262 to Reservation"_.
As per standard process TR (transfer requirement) creation takes place as per the setting in IM-WM interface. Please check in Tcode OMLR, if TR create field is having "X" for the warehouse and reference movement type record. Normally whenever any material document gets posted in IM, MM-WM interface provide the decisions about which WM movement type to pick for warehouse and data about TR , PCN and TO creation.
Hope this will help.
Regards,
Sudhir

Is Open Directory required for Webmail??

Anyone know if I need to enable Open Directory (Tiger Server) in order to use webmail successfully? Currently I am trying to get it going with all users on the local directory but it's not working. Thanks for any help. Rob

Hi
Is Open Directory required for WebMail?
No.
The Web Service needs to be enabled. For that to work effectively DNS needs to be configured and running. Its not absolutely necessary but its better if it is. Obviously the Mail Service needs to be running as well as users having Mail enabled for them in WorkGroup Manager. Obviously you need to enable IMAP for desired users. Either POP and IMAP or IMAP only.
In the Web Service enable the WebMail option. Server Admin > Web > Settings > Sites. You need to enable the WebDAV Module as well. Its in the Modules section. That should be it.
If you want external access open port 16080 and allow public/external requests to the private/internal IP address of your mail server. Create an appropriate firewall rule if your router requires it.
Tony

Update Transfer requirement for partially picked Transfer Order

Hi,
I am looking for a functionality to update a transfer requirement for a partial picking.
For example, we have a TR for quantity 100 pieces and we have 80 pieces in stock, so we create a TO for 80 pieces and the remaining quantity on TR would be 20. Now we dont want to pick for the rest of the 20 pieces, instead we want the TR to be updated for the quantity which will be picked i.e 80 Pieces.
Also, is it possible to put some kind of a rule which govern that the TR should be updated only if we are picking for atleast 80% of the quantity originally mentioned in the TR.
Thanks in advance,
Mike

Hi Frenchy,
Thanks for the answer. I have one more question.
Is it possible to automate it based on a movement type, so that every time we create a Transfer Order for this movement type the relevant TR will be automatically marked for 'final delivery'. This would help us, because then we would not have to go to WAM everytime to mark it as complete.
Or some kind of configuration that will dictate that only one Transfer order will be allowed for a Transfer Requirement and the TR will be set to complete as soon as the TO is confirmed.
Thanks,
Mike

Transfer requirements for material (WM)

Hi,
in trx LB11 I noticed that for a material there is transfer requirement number and the related requirement (production order).
If I execute trx SM12 I can see that a user is working on that transfer requirement.
When another user try to create a transfer order on the above transfer requirement , system
replies with an error which says that is not possible to create the transfer order. System doesn't tell which user name is
locking the transfer requirement
I cannot understand what is the problem and I always have to unlock by SM12 the transfer requirement so that it will available for another user
Could You help me to understand what is the problem ?

It seems that a custom trx groupes many TR and then creates transfer orders.
So user lock many TR....
I asked to the consultant to create a custom message which tells that a user is processing the same TR number....

Close open Transfer Requirements

Hi
Transfer Rquirements created for outbound delivery Transfer Order due to wrong configuration in the IMWM movement type. now we modified the config but the open TR's are there. how to delete the open TR's in a mass way because we have lot.
Thanks in advance.
Chandra.

There's no standard way of mass deleting the TR's, but there's a mass way to mark open TR's as fully processed/complete and therefore, will not appear as open.
You can use Warehouse activity monitor - LL01 (provided '02' open TR object is activated for the Warehouse) to mark open TRs as 'TR status delivery complete', in mass. By doing so, the TR's will no longer appear to be open.

Transfer requirement for STO

Hi all ,
Can some one help me on this .
In a scenario there are 2 plants one is Domestic and other is Export Oriented Units .
I want to transfer the Raw materials from Domestic and Export to each other using automated STO.
What are the excise complications involved in this process.
I want use the MRP run for the supplying plant is that any procedure in Std SAP so that the requirement transfer happens between the plants .
Thanks,
ksr

Hi ,
I am not able to recall any info on excise(CIN) ..But STO is possible using MRP 2 , special procurement type on material master.
Check help on this std config.
Thanks,
sudhakar

Is License transfer required for what I intend to do?

Hi
Adobe has an enticing offer of 50% off off the Production Premium suite. It's available in many markets, but not here in India. However, I have an uncle who lives in Canada. I intend for him to make the purchase from the Adobe Online Store. A cursory search indicates that a few people have done this before. However, a couple of queries:
1) if my uncle creates an Adobe ID and buys the software as an ESD, does he automatically become the original licensee or just remain the purchaser until it's registered? He won't download the software after purchase, unless I ask him to. Does the same answer apply to retail box purchase?
2)If he does become the original licensee, just via the sale transaction, the License Transfer form should suffice to get it in my name, right?
3)If he does NOT become the original licensee, can I then register the product with my Adobe ID?
Thanks.

All download software is pre-registered to the purchaser's user account, so yes, a transfer of license may be required at some point. It has no influence on activation, though. So as long as you're on good terms with your uncle and get the serials, you can "keep it in the family", I guess and need not rush the transfer.
Mylenium

Open Transfer Requirements - Fixed Bin replenishment

We have a situation where TR's remiained open for lack of stock in source Storage types. When these Tr's are closed as completed, they re-appear due to min/max. It is being cumbersome to check each TR if this was due to LP21 or a genuine TR. could some one advise how to get around this issue. Mov type 319 is configured to ctrate TO from TR autommatically.
appreciate any help on this.
thanks

What is a "genuine" TR?
One idea:
When listing TRs in LB10 you can see the movement type. For fix bin replenishment you can define which movement type should be used by system. Based on this you can distinguish between replenishment related TRs and other TRs.

Open Transfer Requirements for Mvmt 261 in LL01

Similar Messages

Maybe you are looking for