Open Transport with Dial-up and System 8.5

Hello,
I'm looking for definitive information on Open Transport. I have a CD service manual but their information is vague.
I'm trying to configure a 6214CD Performa with OS 8.5 and dial-up. I've had the machine on dial-up with Config PPP for a long time with 7.5.3, however, after a clean, full install of 8.5, I can't get conntected.
Config PPP "appears" to connect, but I don't believe it really is connected. From all my reading it appears that one MUST use Open Transport after 7.5.3, but I have never been able to find enough detailed information to do so.
Am I correct in that there is no actual OPEN TRANSPORT Control Panel? With the new 8.5, I no longer see Network Software Selector.
The CD service manual says the Mac OS "hides the Classis appletalk files (Network and MacTCP) by making them invisible.
I do have TCP/IP. I've used Macs for 15 years and have tried and tried but never could find good info to work within OPEN TRANSPORT. I'm willing to read and read if someone can direct me to good data,
thanks
Lowell

Lowell,
I use apple + shift + 4 because it allows me to crop for just the two windows that I want. Having caps lock down will give you a bullet instead of cross hairs and captures just the window that you click on. Because TCP and Remote Access are two windows, screen capture w/ caps lock does not do the trick and a full screen capture is more than I need.
When I tutor seniors, I always wonder what their configuration was before their machine quit on them. I have to work from scratch. By taking the screen shot after configuring their computer, I can help them over the phone becuase they have a picture of what settings need to be. It saves me a lot of time explaining!
As for a small, simple program, I am afraid to say that Filemaker Plus from 1985 has served me so well over the years that I have not explored every new gadget software that has come out since. I bought one such gadget program from New Zealand more than a decade ago and was disappointed when it did less than Filemaker with more trouble, not less.
Filemaker 2.1 has 98% of the features I ever use. If you take a screen shot, paste it into a Filemaker layout and then draw text fields over the top, you get WYSIWYG capabilities. You can select the picture and designate it as a non-printing item so that you see the form on the screen but do not print a screen form onto an actual preprinted form.
There are a few OCR programs that let you scan a form and then create text fields over the top for converting forms into a database. The form is essentially the same as a screen shot at that point. Those programs are good for quick formatting while scanning into text but Filemaker is still faster for me because I was fortunate enough to start using it 21 years ago.
Jim

Similar Messages

When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

Hi fabiangs,
I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
I look forward to hearing back from you.
Best,
Sara

STMS - Transport Routes - Multiple Clients and Systems

Hi Guys
We are setting up a ERP Landscape based in four systems
AED - Gold Development (Most Development starts from here)
AEC - Customer Development (101,102,103...)
AEQ - Customer QA (401,402,403,...)
AEP - QA Production (701,702,703,...)
Our main goal is to release transports from AED 100 to all clients in AEC (101,102,103...)
CTC was already set up to 1, and all system share a same Trans Dir
For this purpose I have created a transport Group /SOD_DEV/ and added AEC 101, 102 and new clients would be added
Only customizing request should be replicated on each client, and workbench only for one client.
Then, I need also all the transports from AEC go their respective client transport queue in AEQ and AEP
Example:
AEC 101 --> AEQ 401 --> AEP 701
AEC 102 --> AEQ 402 --> AEP 702
And in the future it should be able to expand to
AEC 103 --> AEQ 403 --> AEP 703 and go on.
My questions are:
Should I create a Transport Group for Customizing and Transport Layer for Workbench? O can I use a single Tranport Layer for both Workbench/Customizing?
How can i create a route from AEC so transports who got imported in 101 are automatically delivered to 401 and then 701?
Thanks
Martin

Hi Yuksel, thanks for your input.
We agree with a tranport Group between AED and AEC. Transport layer is ZAED.
All developments made in AED, are distributed to Transport Group /SOD/ to all AEC clients (100,101,102...)
Now comes the tricky part
for example, all requests that were imported in AEC 101 should be delivered to AEQ 401 and then delivered to AEP 701 only
That why I didn't put a transport group between AEC and AEQ, since it should be a dependency.
Any transport that was imported on AEC should follow their respective route
Workbench: AEC 100 --> AEQ 400 --> AEP 700 (Sytem-Wide Workbench requests)
Client 1: AEC 101 --> AEQ 401 --> AEP 701 (Client-Dependent Customizing)
Client 2 :AEC 102 --> AEQ 402 --> AEP 702 (Client-Dependent Customizing)
And it wiil follow with
Client 3 AEC 103 --> AEQ 403 --> AEP 703 (Client-Dependent Customizing)
It created these delivery routes; as example for Client1: AED101-AEQ401 and AEQ401-AEP701. Is that correct?
See attached the screenshot for better reference, you are welcome to further suggestions
Best
Martin

Problem with purge temp and system tablespace

hi,
i am purging tablespec with sys user and it seems doing it, but tablespaces are still full
also wanted to drop a datafile
alter tablespace system drop
datafile 'C:\oraclexe\files\sys.bf'
and it giving the following error
Error starting at line 28 in command:
alter database datafile 'C:\oraclexe\files\sys.bf' offline drop
Error report:
SQL Error: ORA-01541: system tablespace cannot be brought offline; shut down if necessary
01541. 00000 - "system tablespace cannot be brought offline; shut down if necessary"
*Cause: Tried to bring system tablespace offline
*Action: Shutdown if necessary to do recovery
but if i shutdown how i drop it? or delete manually the file?
sorry for the 2 question in one thread
thanks

but if i shutdown how i drop it? or delete manually the file?Operate in MOUNT state.
But If you need to resize your system tablespace, You have to check HWM.
On XE, I think it's easy to use full exp -> recreate -> full imp..
Regards,

Help with Package Maker and System Image Utility

Hi all....
Im trying to use package maker and System Image utility to create a netinstall image. I dont know if im creating the package wrong, or if it has something to do with siu... but when I install the image from the server only the OS installs... not the packages. The packages just get copied to the HD.
Right now im just working on trying to get office to install with the OS...
Any advice would be greatly appreciated...
Thanks...

Just realized that you said the following:
The packages just get copied to the HD.
It sounds like you've made a installer package that's installing the installer packages.
If you simply double click the package you've created and install it, does it do the same thing? If so, then that's what you've done.

Mail with MS Exchange and system folders...

A friend of mine is using Mail 3.5 with his company's MS Exchange server (2003?) and it works fine. He can send and receive with no problem. He can create folders in his account. He can SEE the system-wide folders on the server, HOWEVER, he cannot file a mail message in the system folders.
Is this a configuration issue that needs to be addressed or is this a deficiency of Mail when used with an Exchange Server?
Any help on this would be appreciated.
Peter

Barry,
I too have battled this problem for several years. I can't remember the exact reason why this doesn't work for me, but I thought it was because when our email messages are sent to the Exchange server, they aren't going directly to it, they're going through a spam checker that is attached to the Exchange server. Because of this handoff, I'm not able to send mail directly through the Exchange server in my company.
As a workaround, set up a Gmail account with Google. After you do this, Google gives you access to send mail using port 995 with a username and password they will supply to you with during the account creation process. I now use this to send my outgoing messages and I can send from anywhere in the world I have internet access... You will need to set up your google account to make your "reply to address" your work email address and the same in Mail, but thats about it.
Brad

Firefox browsers keep opening automatically with 3 tabs and keeps hanging the computer

Since last week the Firefox browser keeps on opening automatically with 3 tabs till it finally hangs the computer. I searched with malwarebytes, trend micro antivirus, superantispyware, microsoft safety scanner, trend micro housecall but nothing happens. The problem still persists

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

Is it possible to use ppp cb with dialer int and AAA provided cb-dialstr

Hello Cisco fellows,
I am wondering if I can use callback with AAA provided callback string without a rotary group but with dialer profiles.
I have tried to setup a callback server with the following config:
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
interface Dialer0
ip address 192.168.1.7 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name User_R6
dialer idle-timeout 60
dialer enable-timeout 1
dialer max-call 10
dialer-group 1
ppp callback accept
ppp authentication chap
But this config doesn't work for me.
I am getting the following debug messages:
Jun 30 17:07:47.307: BR0:1 DDR: callback to User_R6 already started
Jun 30 17:07:48.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to up
Jun 30 17:07:48.391: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 164 User_R6
Jun 30 17:07:48.391: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 164 User_R6, call lasted 2 seconds
Jun 30 17:07:48.391: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
Jun 30 17:07:48.391: BR0 DDR: has total 1 call(s), dial_out 1, dial_in 0
Jun 30 17:07:48.391: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0
Jun 30 17:07:48.395: BR0:1 PPP: Sending Acct Event[Down] id[7D]
Any ideas.
Cheers,
Michael

Hello Michael,
I think for the AAA provided callback string to work, you need to configure 'dialer aaa' on your dialer interface. Check the following document for a sample configuration:
Configuring PPP Callback over ISDN with an AAA Provided Callback String
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800946ff.shtml
HTH,
GP

How to open files with "return" key and delete files with "delete" key?

Hi friends,
It's been over a week since I got my iMac and I'm loving it. However, while I'm adapting alright to 'mac' key shortcuts (e.g. using the COMMAND-S for save as opposed to CONTROL-S used in PC).
However, there are 2 things that are annoying me greatly right now.
1. I like selecting files with keys as opposed to using the mouse. I make animations and prefer keyboard shortcuts. However, when I hit "return", instead of opening the file it goes into file-renaming mode. How do I change this? Likewise, I would like to delete files by hitting the delete key. This does not work - how do I change this?
2. When I click SHIFT key sometimes, it gets 'stuck' - which is annoying because I start typing CAPITALS when I wasn't aware I've activated the CAP-LOCK key. How do I get rid of this? Like, I don't want to hit SHIFT for instance, and have that up arrow thing 'stuck' there.
Your help would be greatly appreciated! Thanks!
iMac G5 Mac OS X (10.4.9)

Hi
Thanks for the star.
If you went into Mac Help & searched, 2 results come up:
Full keyboard access shortcuts for interacting with items (for selecting & activating controls).
Full keyboard navigation keyboard shortcuts (for navigating Desktop, Windows, Menu bar etc)
From the lists, select the link that closely describes your situation.
I have to say that I can't reproduce your problem, does this happen just in applications or in everything? I don't know if it's to do with this but pressing Shift 5 times turns on Sticky Keys & Option(Alt) 5 times to turn on Mouse Keys (System Preferences>Universal Access>Keyboard).
After typing "Sticky Keys" into Mac Help, I found this:
"Pressing a group of modifier keys as a sequence
To perform many tasks on your computer, you need to press one or more modifier keys (Shift, Command, Option, and Control) at the same time as another key. For example, pressing Shift-Command-Q in the Finder opens the Logout dialog.
If you have difficulty pressing several keys at once, you can make it easier to press a set of keys by turning on Sticky Keys in the Universal Access preferences pane. With Sticky Keys turned on, you can press a set of modifier keys as a sequence. As you press each key, the symbol for the modifier key appears on the screen.
Choose Apple menu > System Preferences and click Universal Access. Then click Keyboard.
Select the On button next to Sticky Keys.
To hear a sound whenever the computer registers that you have pressed a modifier key, select "Beep when a modifier key is set."
To see an icon indicating which modifier keys you have pressed, select "Display pressed keys on screen."
You can also use Slow Keys to adjust the amount of time between when you press a key and when it is activated."
Any of this close to your problem?
Steve
Edit: I'm right, it's Sticky Keys:
http://www.macusenet.com/190284-post2.html

Problem with showing battery and system information in openbox

I wanted to install docks( in open box wm ) which give me battery life information and some thing like that but when I run them terminal give me this error :
CPU frequency scaling NOT available
No power management subsystem detected
No power management support...
what should I do
Last edited by sarsanaee (2013-08-08 15:14:42)

well.. dockapps are veery old fashioned way to do that. If you look at wmpower app on that site you see it hasn't been updated for nearly five years, so i'm not surprised if it's not working on a modern system.
many people use conky to display power status on openbox, so you might want to look into that..
you can add power applet to various panels (xfce-panel, gnome-panel etc.) and use the panel with your openbox session
you could also code/google for openbox pipe menu script that does what you need
if none of those options work for you i found this git repository that seems to be still maintaied that holds wmpower and some other dockapps: http://repo.or.cz/w/dockapps.git
unfortunately couldn't find PKGBUILD for that on AUR...
Last edited by ooo (2013-08-09 11:25:56)

Open report with "Save as" and "Open with" dialogue

Hi,
I'm using jasper reports within my application. I manage to open them in a new window but in that case the url containing JasperServer username and password is shown. I would like to open the report without showing the url.
I tryed using a database procedure (http://sqlcur.blogspot.com/2009/02/jasperreports-in-apex.html) but all I get is a alert window saying "file does not begin with ' pdf-'". Couldn't see what is the problem (I used the same procedure as Ino has in his example) so I thought of another way. Is it possible, when someone clicks a button to open a report, to open that report with a "Save as" and "Open with" pop up window?
The javascript function that I use:
<script language="JavaScript" type="text/javascript">
function openLAPopUpJasper(url){
w = open(url,"winLov","toolbar=false,menubar=false,location=false,resizable=yes, //scrollbars=yes,status=yes,fullscreen=true");
if (w.opener == null)
w.opener = self;
w.focus();
</script>
Thanks in advance!
Edited by: Josip on Oct 29, 2009 2:55 AM

Anyone?

Downloaded new version of Java but doubled clicked on it and it will not install, message says i need to open it with an application and wants me to choose one.

firefox disabled my version of java, i went to the free download site to get the newest version, clicked on download then doubled click on it in the download list, this should have started the intallation but instead i got a message saying i needed an application to open the link and wanted me to choose an app. Install box did not come up as it has with other downloads. I do not want to open it i want to install it.

Where did you download the java?
Download it from here [https://www.java.com/en/download/index.jsp https://www.java.com/en/download/index.jsp]

Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

Hello,
Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
Is there a way to make PDFs always export to 'Page only' automatically as default?
Thanks!
Ione

Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue. The problem seems to do more with memory allocation/usage.
I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting. Both of these allow me to get a few pages farther along, but still not through the entire book.
I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago). I didn't know if there might be something like this hidden somewhere

When opening iPhoto 9.5.1 a dialog box appears: "A photo has been found in the iPhoto library that was not imported". "Would you like to import it?" After appearing twice iPhoto then opens normally with no changes and works OK. Why dose this happen.

Unwanted dialog box when opening iPhoto.

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. Make no other changes. Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

Can't open database with Windows from linux system *URGENT*

Hi,
i've two systems. A Linux SuSE 9.3 Pro system with Oracle Database 9.2.0.4
and a Windows 2000 system with the same version of Oracle.
Now, i try to connect the Windows system with the Linux system, but i doesn't work. I also, have
installed the Listener, on the linux system.
What am i doing wrong? Can someone help me?
Thanks in advance.
Greets
Daniel

Thanks, but i've already solved the problem.
I've just switched off the firewall on the linux system.
And now it works.
But thanks for ur reply.

Open Transport with Dial-up and System 8.5

Similar Messages

Maybe you are looking for