Open untagged JPEG with external editor, then be attached with sRGB profile

Hi there,
I wonder why I open untagged JPEG with "external editor" (Photoshop CS) , then the JPEG will be attached with sRGB profile. Of course my color setting on photoshop is "Use the embedded profile".
I think sRGB is the default RGB space of colorsync utility , because the profile is also sRGB when you check "Add Colorsync Profile" on iPhoto 6.
Anyway , I want to set up total Adobe RGB workflow , so does anybody know how to change sRGB profile to Adobe RGB profile when opening untagged JPEG directly with external editor?

Thank you for your reply , Lloyd.
I am sorry , but I noticed my misunderstanding message.
As you know , you can change raw and other image files to tiff or psd for external editor. You can select that on the preference. At this situation , if you pass nontagged image file to external editor , then automatically sRGB profile is attached.
I don't think this is related to export preset for JPEG file.

Similar Messages

Deleted RAW file after "Open with External Editor"

I opened a file in PS using the "Open with External Editor" command and saved and it saved the update in Aperture but I needed to make anothe change so I did the same as before using the "Open with External Editor" command. Aperture created another "version" so I attempted to delete the version and it deleted all the versions as well as the "Master" RAW file. I went into my trash to find the RAW file and PS file that I wanted to keep but the RAW file was not there. I don't understand why it would put the PS file in the trash but the RAW file is nowhere to be found. Is there another place that it would go?
Dual 2.7 G5 Mac OS X (10.4.8) 5GB RAM

If the master was inside the Library then after deleting it, should be in the Trash, inside a folder called Aperture.
If it was a referenced master it should be still in the location it was unless you ticked the box 'send master to trash', in that case it'll be the same as if it was inside the Library.

Open with External Editor Profile sRGB instead of Adobe RGB

Hi,
I know in the export presets I can adjust what profile aperture will use. But what about when I open with External Editor. I like doing this because I can open my image in PhotoShop make my adjustments then save it and have aperture manage my files. But when I do this it opens the file with Adobe RGB, my lab and I sometimes want Adobe RGB. How can I change this without exporting the file and reimporting the file. Thanks.

Aperture uses a color space larger than AdobeRGB and sRGB. When an image is sent to Photoshop is converted to a 16bit AdobeRGB PSD file in order to get the largest color space to work with.
sRGB would be necessary when exporting to the web and/or send it to a printer that requieres that color profile, and that's why you have it in the export presets.

No new version from Open With External Editor?

Is there a way to not create a new version every time I use "Open with External Editor"?
If I want to open an image in PS, just opening it creates a new version in Aperture, even if I don't make any adjustments to the image in PS.
I've deselected "Create new versions when making adjustments" in the preferences.
Thanks for anyone's insight!

Not sure this will help, but I noticed this problem as well a while ago, but have since developed a work around...
All my files start off as RAW. When I use "Open in External Editor", Aperture generates a new version with a bulls eye target (this is my C2 version). If manipulate this image in CS and save it when I close, it remains as a bullseye target (look at the lower right corner in full screen). If I reopen this specific image, no new file will be generated. If I manipulate it in Aperture, a new file will be generated (but without the bullseye target) and if I then use "Open in External Editor" another new file will be generated.
I have never checked to see what happens with a primary PSD file imported. And I am sure the meaning the bullseye target is in the manual someplace.
So my workflow is RAW file-->all my desired aperture adjustments-->open in external editor for final clean up and modification. I end up with my original RAW file (Aperture modified and restorable to original by removing all selections) and one CS2 file. If I want several version off of my first CS2 file, I duplicate version of the CS2 file, and the open the bullseyed version NOT the new duplicate version image.
Hope this helps...i know is seems wierd, but it works
steven

"Open with External Editor" command bug?

Seems to be a bug with "open with external editor" command. If I try it just after Aperture has been opened, it usually works (sometimes not). And then after a couple of photos being edited in photoshop, it sometimes stops working. When I try it, it simply gives me SBBOD for a few seconds (which it does when it's working as well), and then nothing happens. No new master created in Aperture, and nothing in Photoshop. If I restart the program, it usually takes care of the problem, and it will work again for a bit. Sometimes restarting the program doesn't even work, and I have to reboot. Very strange.
Any one else getting this? Any ideas?
I'm using 1.1.1 and Photoshop CS2.
powerbook G4 1.5 Ghz Mac OS X (10.4.6) 2 GB RAM, ATI Radeon 9700 (64MB VRAM), 80 GB ATA HD (5400rpm)

Anyone out there? No one else experiencig this "bug"?
Help, please.

Setting color space in "Open with External Editor"

This has been touched on in the forums, but I wanted to ask the question outright: Can you set the output color space to something other than AdobeRGB when you use "Open with External Editor"? I can't find any way to change it... I like to work in ProPhoto, I saw some like to work in sRGB.
Regardless of how the presets are set in the Version Export or the Presets, it will only come in to Photoshop as AdobeRGB.
Anybody know?
Ted

This has been touched on in the forums, but I wanted
to ask the question outright: Can you set the output
color space to something other than AdobeRGB when you
use "Open with External Editor"? I can't find any
way to change it... I like to work in ProPhoto, I
saw some like to work in sRGB.
Regardless of how the presets are set in the Version
Export or the Presets, it will only come in to
Photoshop as AdobeRGB.
Anybody know?
Ted
Well, to answer my own question, I now have it on good authority, actually the best authority, so good I can't say WHO, that there is NO way to specify a color space when using "Open in External Editor". Other than writing a script.
Hopefully this is an oversight, and will be in the next update!
Ted

Opening with external editor always makes new version

i am a fine art figure photographer and portrait artist. almost every photo that i want to finish has to be round tripped to photoshop for retouching. in Aperture 1.5, i could select a photo, open in external editor (photoshop cs3), make my retouches and save the new version. if i wanted to re-visit the image and make further modifications, i could select the round-tripped photo, open with external editor, and the edited photo would be opened without creating a new version.
now in Aperture 2.0, once an image is edited and the new version saved, if i try to re-visit the image Aperture always creates a new version. this is a behavior that i don't want. new versions of photoshop edits are expensive when it comes to disk space. and with 30,000 images in my library, i just can't afford it!
in the preferences, i have the option "Create new versions when making adjustments" unchecked. that's the only option i can see that affects the automatic creation of new versions. any advice on how to edit the image without making a copy would be greatly appreciated!
thanks,
scott
Message was edited by: scott nichol

Hi,
I had the same problem as the OP and was surprised to read that Ian didn't encounter that same behavior. So I started testing several options. This is what I found;
When I open a previously-externally-edited picture from within Aperture, using the keyboard shortcut ⇧⌘ O, Aperture automatically creates a new version.
The same thing happens when I choose 'Edit with Adobe Photoshop CS3' from the Images menu in the menu bar.
On the other hand, when I open a previously-externally-edited picture from within Aperture by Ctrl clicking the picture and choosing 'Edit with Adobe Photoshop CS3' from the pop-up menu, the picture opens in Photoshop without Aperture creating a new version first.
Very strange because the pop-up menu command has the same keyboard shortcut as the commands I used in the first and second attempt.
Hope this helps.
Cheers,
Ivan

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

Aperture - Edit with External Editor - Photoshop

Hi,
I recently made my first attempt via Aperture to "Edit with External Editor" and in my case I have the preferences set to export to Photoshop CS4 Extended. The External Editor File Format (in preferences) selected is TIFF and as advised by Apple's Help menu this is set at 16-bit. The External Editor Color Spaces is set to Adobe-RGB (1998).
I selected an image with some barrel distortion, hit the export button, and Aperture sent the new master to Photoshop. I did my fixing and saved. This automatically sends the updated file to Aperture. This is very handy and practical but I was shocked to see the size of the new and fixed file. The original file was a JPEG at 4MB and the new fixed file was a colossal 200+ MB file. I ended up throwing away the new file - too large.
I am just wondering if this is normal? This is my first time using the Edit with External Editor in Aperture and I am also quite clueless about using Photoshop efficiently and properly. Could I have done something differently and received the new and fixed file at a smaller size?
Thanks for your advice and help.
Chau

Chau wrote:
I am just wondering if this is normal? This is my first time using the Edit with External Editor in Aperture and I am also quite clueless about using Photoshop efficiently and properly. Could I have done something differently and received the new and fixed file at a smaller size?
This is normal.
TIFF files get rather large and the 200 MB sounds about right. If I send a 1.63 MB JPEG at the same settings in PS CS5, I get a 134 MB TIFF after applying the Lens Correction filter and saving.
If I send the same file as a TIFF 8-bit in Adobe-RGB (1998), I get back a 54.73 MB file.
You could therefore send as an 8-bit TIFF to reduce the size. Additionally, the PSD format tends to return a slightly smaller file size (51.xx MB in the case here).
A JPEG file is actually only an 8-bit file, so it isn't really necessary to go to 16-bit, but many users like to protect against further degradation of the JPEG when editing externally (especially from posterization where smooth gradients - such as a sky - start to break down into visible steps in the color transition).
I personally send as TIFF 8-bit in the sRGB color space and if the image shows degradation, then I might change to the TIFF 16-bit (or simply not use that image).

Aperture 3.5 does not open all files in external editor (PS CS6)

When I select several photos in Aperture (which are parts of a panorama serie for example) and click choose to open them in the external editor (here Adobe Photoshop CS6), only a random subset are opened.
Aperture warns me if I want the (for example) 14 pictures to be exported for edition, I confirm, but I end up with only (for example) 9 photos in Photoshop. The missing ones can be any photos (not necessarily the first or latest).
Note that 9 is not an upper limit, I once opened 23 photos and only had 21 in Photoshop opened.
If I again select those same photos and choose to export them (either as PSD using the same format as with the Editor command, or asking for the original that was created for the external editor) to a folder. Then when I open all the photos at once form the finder (or Bridge) to Photoshop, I have all the photos in Photoshop. So Photoshop has no problem opening the files.
Do you have the problem too? How do you solve it?
For the time being I manually export the files, open them from the Finder, stitch them in PS and reimport the result in Aperture.
A bit tedious... If there is no work around, I will try to fiddle with some automation...
Final note:
PS CS6, Aperture and OS X are all at there latest respective versions (i-e respectively: 13.0.6, 3.5.1 and 10.9.2)

I was just noticing this issue with A2.0.1
Selecting multiple files in A2, only one would open in Photoshop.
I have found that, if when opening files from Aperture, the color setting profile in PS is different than the color tag in the image, such as sRGB vs aRGB, the mismatch warning appears and stops subsequent photos opening.
If the image profile matches the color settings in PS, then all selected photos open from Aperture to PS.

New Photo in OS X option to edit photo with external editor such as Photoshop has been removed. will this be back!

Hi
I have just updated my iPhoto to Photos in OS X and i have noticed that the option to edit photo with external editor such as Photoshop has been removed. will this be back!
Its now a pain to send a photo directly to my favourite photo editing software.
Ross

Thanks Terence
Totally understand being a new app and not an update.
So i'm a ammeter photographer and i like the way i can view my photos in iPhoto and i'm happy with the new App for this also, however i like to edit my photos in PS from time to time and i shoot in raw. As i can no longer select edit in external editor from the photo app i tired to drag a RAW photo to PS but this didn't work. i then tried dragging to desktop but this then made a jpeg so i loose my raw advantage. I would like to be able to find my original raw photos easily so i can edit them in PS.
Hope that makes sense?
Ross

Edit with external editor command in iPhoto

I know there is a way to set IPhoto so you can use both iPhoto and PS Elements editors to edit photos. I have seen the "*Edit with external editor*" command within the Edit header within iPhoto but can't figure out how to do this. I found the below and tried it but it doesn't allow me to set two editors within Preferences. What am I doing wrong?
+"If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and select "Edit in external editor" in the Contextual menu). This way you get the best of both worlds"+
Thanks,
Scott

FIRST set external editor to PSE
THEN change the selection back (NOT TWO selections - just this one) edit in main window leaving PSE as the external editor
once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window".
+You are working VERY hard to make this dificult - *it is simple*+
Set PSE as the external editor THEN select edit in main window as the default without changing PSE being the external editor - One selection - EDIT IN MAIL WINDOW
NOW double clicking will edit in iPhoto -- Right clicking (or control clicking) will give you a contextual menu allowing you to choose PSE as the editor
LN

16bt files with external editor

Am I missing something very obvious?
No matter what I do, I am unable to export to external editor (photoshop) and have them open as 16bt files. They always open as 8bt.
What am I doing wrong?

No, you are right. My nice 16 bit file goes to 8 bits
when opened in the external editor. Needs to be fixed.
Needs to be fixed and we should not be forced into Adobe RGB (1998)! What if the scene gamut exceeds this? I can’t get ProPhoto? Or the scene gamut is much smaller but I want 16-bit sRGB?
Is there any logic in how Aperture is providing this encoding? Again, I suspected it was based on the EXIF data the camera writes to the RAW file based on the matrix. I’m lazy but should set my Canon to sRGB, shoot RAW and see what Aperture thinks it should use. But that doesn’t matter because having only sRGB or Adobe RGB (1998) doesn’t cut it.
Why not allow us to setup as we do with Export how we want the Open with External Editor to handle all this?
From a color management perspective, this application is hopeless lame. Hard to believe it’s from the company that started the ICC and introduced ColorSync. We can’t control the rendering intent for output color spaces. The Histogram doesn’t tell us squat about the rendered image and there’s no RGB info palette (that again should tell us the values AFTER we produce a true RGB image. How can they call this a Pro tool?
Message was edited by: digitaldog

Edit with External Editor not working?

In my iPhoto advanced preferences I checked the box to edit with external editor. When I ctrl click a RAW picture it doesn't open my Adobe Elements? Anybody know why?

matbran
Why cntrl click? Try just dbl click.
Regards
TD

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

Open untagged JPEG with external editor, then be attached with sRGB profile

Similar Messages

Maybe you are looking for