Open URL Ivew in a new window without loosing the current session in Portal

Hi All ,
I have a requirement in which there are two tabs in portal which are two roles A and B
Where each tabs(role) has an URL Iview attached to it.
Current I am in Window 1 - Tab A
When I click on Tab B, it has to open in a new window (Window2) with Tab B content , where as the previous session (Window1)is not lost and Window1 has to show Tab A only.
Kindly help me out on how to implement it .
Thanks in Advance

Hi All ,
Thanks for the reply and sorry for the late response. 
As per Prashant  I made the setting .. When I click Tab 2 in Window 1,  opens  a new window 2 with Tab 2 iview .but the window 1 is hilighted with Tab B and the current session on Tab A is lost . As per the reqiirement I should not loose the focus on Tab A in Window1.
also Kindly let me know how and where can I sent the EPCM paramenter for the URL Iview .
Thanks in Advance
Edited by: Prasanna Kumar on Feb 21, 2012 12:42 PM

Similar Messages

  • When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs

    When I open a new window, the current window is closed. I would like to keep the current window and open the new window without losing my current window. I checked "Open new window in a new tab instead" under tabs
    == This happened ==
    Every time Firefox opened
    == Noticed yesterday, June27, 2010

    i just went into preferences, deleted what was in the home page, and entered a new home page address which solved the problem, 

  • When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

    When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • How do I sync my iphone to a new mac without loosing the original data

    How do I sync my iphone to a new mac without loosing the app data?

    You must first sync the iPhone with the old Mac as you normally do, then move the entire iTunes Library from the old Mac to the new one.
    An iPhone can only be synced with one computer at a time. When you first sync the iPhone with the new Mac, you will "erase and sync". This will erase the entire phone first, then sync it with the content you moved from the old Mac.
    This explains the procedure: iTunes: How to move your music from one computer to another

  • How do i transfer to a new computer without loosing the music from my CDs that arent purchased on itunes?

    How do i sync music from my ipod to a new computer without loosing the music i have on it that has not been purchased from itune its from my CDs

    The ipod is not a backup device.  The music sync is one way - computer to ipod.  The ony exception is itunes purchases.
    Copy everything from your old computer, or your backup copy of your old computer to your new one.

  • How to open new window without loosing pageFlow context?

    I am using 8.1 SP 3.
    Here is what I need to do. I have a an anchor link in a jsp that needs to open a new window after executing an action in a page flow. That action forwards to a jsp that needs to be able to access pageFlow variables.
    So, I have the following:
    <netui:anchor target="_blank" action="timesheetSubmitView">
    Everything works fine, that is it opens a new window and keeps the pageFlow content, BUT the new window contains all of the portlets that were on the original page. What I need is a new window that just contains the jsp that my action forwards to.
    I looked through the various topics on this forum, but the recomended approach posted by someone to enable redirect does not work because weblogic is loosing the pageFlow context, so jsp errors out due to the fact that variable on a pageFlow is null.

    I had the same issue. A couple different things to try -
    1. There is a property called redirect in the action. Set it to true.
    That did not work for me, so I just used pageFlow variables and put things into the session. Bad way of doing it, but works :)
    In the action that loads the first JSP, put things into the session. Then in the timesheetSubmitView action get the stuff from the session.
    Write an onDestroy method that deletes the session stuff, when u are done with it.

  • Open a picture in a new window without the diashow-browser ?

    I've already seen it on some pages but i don't know how to do this.
    Is there any trick ?
    thanks

    Are you publishing to .Mac or to a local folder? When you use .Mac, clicking on a thumbnail on a Photo page opens that image in a new window and you only see the slideshow when you click the Start Slideshow button. If you publish to a local folder and then upload to a non-.Mac server, the old HomePage slideshow opens when you click a thumbnail. You can change the non-.Mac slideshow by following the advice in this excellent tip: http://discussions.apple.com/thread.jspa?threadID=313201&tstart=0. (The slideshow recommended there, though, also launches when you click a thumbnail.)

  • New Window from "FILE- NEW-WINDOW" duplicates all the currently open tabs in the new window. I want new window with just the "Home" tab please?

    Running Firefox 3.6.13 on 64Bit Win7.
    I like to group tabs on a topic in a window, and when the tabs get to be too many, or a new topic, I do FILE->NEW-WINDOW and expect a new window with just one default (Home) tab. Instead I get a new window with ALL the tabs of the first window.
    I have checked all the Options I could find. Nothing helped. I CAN make a new Window with just one tab if I right-click a link and say "Open in NEW Window".

    A new window should only open with the home page(s).<br />
    If you see differently then you need to check your extensions.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • Open sites in new window instead of the current window without having to rightclick

    I want the links that I click on to '''automatically open in a new tab '''instead of overriding the existing window.
    I want them to do this automatically, without having to click the right button.
    This is how it worked before, and it's a much easier way to surf.
    Suddenly, last time Firefox was updated, it changed, and now I cannot get the settings back to what it was, even when following detailed instructions.

    Since the introduction of tabbed browsing in Firefox, the default has always been to over-write the currently selected tab with the new page when left-clicking a link or bookmark. You can open a link or bookmark in a new tab by using the following procedures or by installing and setting some preferences within some add-ons. You may have previously used an add-on that is no longer compatible with Firefox (look in Add-ons > Extensions for disabled items).
    To open a bookmark or link in a new tab, on the link or bookmark:
    *right-click and choose "Open in new tab"
    *middle-click (press the mouse wheel button)
    *CTRL+left-click
    *See --> http://www.7is7.com/software/firefox/shortcuts.html (under "Web Navigation" section)
    Some add-ons:
    *Tab Utilities --> https://addons.mozilla.org/en-US/firefox/addon/tab-utilities/ (light-weight extension)
    *Tab Mix Plus --> https://addons.mozilla.org/en-US/firefox/addon/tab-mix-plus/ (heavy-weight extension)
    *Search for other tab related add-ons --> https://addons.mozilla.org/en-US/firefox/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How to open document from mac when using windows without transferring the file?

    How can i open a document from mac when i am using windows without transferring it?

    depend on the document program more then anything else really
    when ever I open a doc with word it make a history for undo and redo action file in the same dir
    with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
    but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
    or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

  • How to redirect a page to a new window instead of the current one

    Can someone please tell me how to redirect a page to new window.
    I mean I am running a JSP with a button and on clicking it i am opening a new window (thru javascript offcourse),
    Now response.sendirect("New.jsp") should be opened in that new window opened.
    I tried it but the New.jsp page is opened in the current page (Even though new window is opened ! ).
    Please help.

    Hi,
    U can use the following code to Pop up in new window
    Jsp1.jsp
    <%
    if(action != "")
    response .sendRedirect("Jsp2.jsp");
    else
    %>
    <html><head><title>JSP 1</title>
    <script language="JavaScript">
    function View()
    window.open("Jsp1.jsp?action=view","View","");
    </script>
    </head><body>
    <form name="frm" method="post">
    <input type="button" value="View" onclick="View()">
    </form>
    </body>
    </html>
    <%

  • How do I automatically go to a new tab when I go to a new website without loosing the tab I'm working from?

    When I'm in Yahoo email, and I hyperlink on another website in the email, I want to go to a new tab but I don't want to loose the email tab that I'm in. Also each time I am in the web browser and change to a new website I want a new tab for each one, not a replacement in the original tab.

    See [[Tabbed browsing]].

  • When opening a link in a new window or tab, the window/tab opens with the address in the wonder bar but the page doesn't load until I highlight the address and press enter. How to fix this?

    Any time I click on a link this happens, it's very frustrating! The only time the link opens correctly is when I open my bookmarks in new tabs or windows. Nothing else loads.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I want to open private browser in a separate window without shutting the old inprivate window, how?

    I have no more details

    Hello nona1234, you can not do that with your 13.0 firefox version, firefox from 20 version and above have the option to open private browsing mode per window.
    see the change : http://www.mozilla.org/en-US/firefox/20.0/releasenotes/
    see : [https://support.mozilla.org/en-US/kb/update-firefox-latest-version Update Firefox to the latest version]
    thank you

  • I purchased a iPhone from a individual, so, it has all his information as far as signing into iTunes...I want to change the Apple ID/e-mail on my iPhone and iTune account without loosing the current information/settings on my iphone.

    Everyone that has or had a iPhone, if they did not buy from the dealer, they purchased it from a individual...in most cases, the phone has to be unlocked unless it's being used with the same carrier as the seller.  My question is, when you purchase the phone from a individual and it has been unlock and has the seller's information...e-mail/Apple ID information for iTunes..so I can't purchase anything from the apple store because I don't have his password...I was wondering how do I change that without resetting it to the original settings, is there any way I can purchase from the iTune Store with my own Apple ID.  Since he does not own this phone anymore, there should be a way to change that....I am just wondering...HELP?
    I sold my first iPhone, it was unlocked, and the guy that purchased my phone, set up it so he could use his own Apple ID, but, I never asked how he did that, because I did not think at the time I would purchase another iPhone...  anyhow, does anyone have the answer...please advise...thanks in advance...

    Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using your ID.

Maybe you are looking for

  • Formula Variable with replacement path on 0CALDAY

    Hi, I am trying to enhance an existing query. I am creating a new formula variable processing by replacement path. In Reference Characterisitic I have choosen 0CALDAY. In the tab options , I selected replacement path. In the replacement path tab, in

  • How to change a DIVISION in Sales Order which is already saved?

    Hi, I want to change only the division in Sales Order which is already created and saved. Which means I already created sales order with sales area GB50/02/12 and now I want to change that division to 14. Please note that it has no reference docs and

  • Change max. size of a page process

    Hi, i have a problem with creating a page process. I try to create a page process with a size more than the max. size 30 KB. Is it possible to change this value to a higher mark? thanks for help

  • Signal booster app not working

    hi .i just downloaded the signal booster app on my bb curve.it debited money frm my visa card and also sent me a confirmation email but when i try to run the app it keeps asking me to upgrade to pro version .can anyone advise me on what to do to fix

  • New Windows 7 machine - iPhone sync wants to erase all my apps...

    I just reinstalled win 7, but have a complete backup prior to my restore. When syncing aps, itunes now wants to remove all the apps from my phone !!!! Can I not reverse sync and bring all the apps from my phone to my pc without loosing any aps or the