Open View not seen in the 7.0 Query Analyzer

Hello ,
I am not able to see open view in the 7.0 Query Analyzer, but that seen in the 3.x Designer
Are we missing something here, or its the GUI issue
When we click on Open, I have only 2 options
Open Query....
Open Workbook...
I could locate my view through the open Query & then naviagting it from the Dialog box, but thats does not seem a good way of locating views.
Any help on this
Regards
Lalan

Hi Lalan,
The Query View is not missing and it's not a GUI issue.It's by design.
With 7.x BEx Analyzer,the Query View can be opened only through Open->Open Query dialog
where you have to select the "Type" as "Query View".It will list the available query views in the open dialog.Select the query view you want to open and click "Open".
This is the way to open the query view with 7.x Analyzer.
Rgds,
Murali

Similar Messages

Info area not seen in the "open query"window

Hi all
For some reason my Info area is not seen in the "open query"window, in the BEx Anal. can some tell me how to fix this.
Thanks
kavi

Hi kavi
I am not sure
Is it Business content infoarea, for me also business content infoarea is not seen, but in "open query" window if u select the icon for create new query,there it will ask for the cuben here u click binaculor icon for search and type ur infocube technical name there u can get ur cube.
Hoope it is helpfull........Let me know
Regards
NR
Assign points if it is helpfull

SmallSearchInputBox not seen in the Migrated site from SP 2010 to SP 2013

We did the content database attach migration and didnt use any tool.
We reworked on the Master Page by taking the seattle.master page and put the custom placeholders.
The design came out well, but the SmallsearchInputbox is not seen in the "View All Site Content" and the Home Page.
Please help to fix this. Thanks in advance
Veena R

Hi Veena,
What did you mean by “We reworked on the Master Page by taking the seattle.master page and put the custom placeholders”?
Did you set the seattle.master page as the default master page for the migrated site?
If yes, I recommend to set the master page to be v4.master and then do visual upgrade for the migrated sites.
After that, add the custom placeholders to the seattle.master page and then check the results.
If I misunderstood, please feel free to correct me.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

Blackberry Passport:
After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
With original OS 10.3 could connect USB key to transfer my photos with file manager.
Any suggestions?

There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
- Ira

Why the menu to move from one page to another is not seen when the page is online?

On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
why the menu to move from one page to another is not seen when the page is online?
Thank you,
Roger.

Where are you publishing and how are you uploading the files?

Decimals not seen in the query...

Hi Guys,
I have a problem with the query..
I have loaded a KF with 2 decimal places in the cube.
But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
For e.g. the value of the KF in the cube is 9.85...but in the query, it is seen as 9
please let me know where do i need to make the changes.
FYI..the unit of the KF is %. Has this got anything to do with the problem ?
thanks in advance,
Punkuj...

Hi Aby,
Sorry, i just missed to mention this imp point :
I had done the operation that you have suggested :
I am getting the following output :
In the Cube : 9.85
in the query ( after the decimal selection) : 9.00
I hope that clears my problem..
Thanks..
Punkuj

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

I am trying to set up my daughter's iTouch. I am connected to our Wi-Fi, and have confirmed this in Settings, but when we try and open any webpage we receive the message that page cannot be opened because not connected to the Internet

I am trying to set up my daughter's iTouch. I am connected to our Wi-Fi, and have confirmed this in Settings, but when we try and open any webpage we receive the message that page cannot be opened because not connected to the Internet. I have already re-set the iPod, have shut-down and restarted, and told the iPod to "Forget Network". please help - i am going bananas!

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

App appears as installed in app store but not open and not run, and the icons are gone from the home screen

app appears as installed in app store but not open and not run, and the icons are gone from the home screenapp

Try quitting the App Store app and relaunching:
Closing Apps on iOS

When using facetime, my picture is not seen on the receiving end. How do i fix?

When using FaceTime, my picture is not seen on the receiving end. Help!

Part of training the junk filter is also to mark good messages 'As Not Junk'.
http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

Nokia n73 music not seen in the library after adde...

i have nokia n73 music edition. using nokia pc suite i added 3 tracks from my pc to my phone. after adding, i refreshed the music library. it says added three tracks, but keep on refreshing to an unending time. so i have to stop refresh forcibly. then the added songs are not visible in the track list in the music player view. it is seen in the gallary. how can i bring them to the music library? again some tracks are not seen while searching . it is very much there in the music library. . i am using firmware rm-133- 4.0750.1.1. plz help

You can try this
640K Should be enough for everybody
El_Loco Nokia Video Blog

HP 200 MFP M276nw not seen in the network after changing router

Printer: LaserJet Pro 200 color MFP M276nw
LAN: two PC's (Windows 7) and the printer wired to the router. Other devices connect wireless. Internet service is cable.
I installed this printer when a Linksys E2500 router was in use. The network configuration after installation of the printer was:
IPv4 address: 192.168.1.120
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP
I replaced the Linksys router with a Netgear WNDR4500 (N900) router one month ago. Everything worked fine for about two weeks. Suddenly, the jobs sent to the printer started to take a very long time to begin printing, until they stopped printing altogether. The printer did not appear as an attached (wired) device in the router's Web-based interface. Not even the HP printer software or the HP Print and Scan Doctor could find a printer attached.
I unisntalled and reinstalled the printer, but was not successful until I changed the Ethernet cable connecting the printer to the router. The difference is that the old cable is Cat5e and the replacement a Cat6 ??? It is printing and scanning now but the printer is still absent as a wired device, and I am afraid that it will stop working once again.
I noticed that the printer's network configuration after reinstallation is:
IPv4 address: 169.254.230.140
Subnet Mask: 255.255.0.0
Default Gateway: 169.254.230.140
IP Configured By: AUTOIP
Searching the Web, I found an article saying that AUTOIP might be a sign of router or cable problems. My suspicion is that the printer's IP address is changing constantly and that's the reason for the printing delay.
My questions to the experts are: could I assign a manual IP address to the printer so I can add in the router -it provides for doing so-, and how is this done? In the HP Device Toolbox, under IPv4 Configuration, there is a drop-down menu with different options -DHCP, BOOTP, AUTOIP, and Manual- but I don't know if changes are done here, or if it is a more complex undertaking.
Thank you very much.
Cordially,
Miguel Iturralde
This question was solved.
View Solution.

I fixed the problem the same day I posted the help request.
I shut everything down -including the cable modem and router- but left the printer on. Went to the printer's panel and changed toe IPv4 configuration from AutoIP to Manual. I already had picked an IP address starting with 192, since I've read that IP's starting with 169 are associated with AutoIP settings. From there, the printer presented valid Subnet Mask addresses, I picked one, as well as a Default Gateway address. Then I shut down the printer.
I turned back on the modem, router, pc's, and printer. The router then showed the printer as an attached device with its newly assigned IP address.
I suspected the cable was not a problem here, so I put back the Cat5e Ethernet cable. What baffles me is why the printer changed to AutoIP because it was not done by any user. Checking the reports printed when the printer was first installed, I see that the IP adress method as DHCP. After putting in the new router, changes consisted in SSID name and password in the wireless devices, and a firmware uodate of the router.
This was learning by trial since I am not a computer expert, but so far, we are to print and scan documents.
Thanks to everyone who took the time to read the post and offered help.

Why does Live View not work with the following: @media only screen and (max-width: 480px)?

When I use the above media query in my stylesheet Live View ceases to update the viewport. I have to update it manually each time I add or change a style. This is not the case when I use styles under a common tablet sized query @media only screen and (max-width: 768px), or when there is no query at all. Is this a bug or is there something I am missing here?

Code errors might account for the discrepancy. Validate your code and fix any reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Document not seen in the SOLAR02

Hi All,
I am not able to find the document in the Test cases tab of a particular Business process, but when I tried to find it using FIND DOCUMNET option I am able to see the document and open the same in Read only mode and when I click on the where used list, it says NO USAGE OF DOCUMNT FOUND.
The same document is shown as ADDED in the history tab of the particular business process-> Test Cases tab-> HIstory. But still I could not find in the Test cases tab when I check.
Pls help with your points.
Regards,
Bharathi.

Bharathi,
This is a very common problem with solution manager ....that if you delete the document using "-" or MINUS sign in solar01/soalr02 then it is not deleted
rather it is removed from ur Project ...so if you have to delete the document then use the DELETE button shown there
Secondly the reason why u can find it is ......that it is removed using the MINUS button and not deleted means it is available in knowledge warehouse but it is not assigned to ur project...
Remember KW has all the documents whether it is assigned to any project or not .
So u cn see and it gives u NO USAGE OF DOCUMNT FOUND msgg
Therefore to delete the documents use the Delete button as I have mentioned.
Hope it is solved now.
Regards
Prakhar

Tabs are showing in other opened windows not associated with the current window.

When I open more than one window the window tabs are displayed as a shadow. How do I correct this? thank you

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Open View not seen in the 7.0 Query Analyzer

Similar Messages

Maybe you are looking for