Open vnc asking for license key

Hi all,
I am trying to install the free version of vnc on my RHEL box:
[root@erp virtualbox_4.2.6]# uname -a
Linux *********** 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@erp virtualbox_4.2.6]# rpm -Uvh vnc-4_1_3-x86_linux.rpm
Preparing...                ########################################### [100%]
   1:vnc                    ########################################### [100%]
Checking for perl... [OK]
Checking for uname... [OK]
Checking for xauth... [OK]
But when I am trying to run it, it is throwing following error message:
[root@erp virtualbox_4.2.6]# vncserver
VNC(R) Server 5.2.0 (r118477) 64-bit (Jun  3 2014 10:59:51)
Copyright (C) 2002-2014 RealVNC Ltd.
VNC is a registered trademark of RealVNC Ltd in the U.S. and in other
countries.
Protected by UK patent 2481870.
See http://www.realvnc.com for information on VNC.
For third party acknowledgements see:
http://www.realvnc.com/products/vnc/documentation/5.2/acknowledgements.txt
Error: No license keys found.
Run vnclicense to apply a license key. [NoLicense]
Why is license required for free version? Am I doing something wrong here?
Regards,
Vinod

You may have installed the VNC enterprise verison. https://www.realvnc.com/products/vnc/documentation/4.6/unix/unixlicense.html
However, why bother installing VNC? Virtualbox ships with a build in VNC server. Please check the Virtualbox docu.

Similar Messages

  • InDesign asks for license key inspite of subscription

    Hi. I purchased Creative Cloud subscription for one year. Donloaded software. However InDesign is still in trial mode and asks for license code. I logged out from application and logged in many times, but it is still trial! Please help!

    Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

    When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • Aperture always ask for license key after migration to a new mac

    Hello,
    I used the migration tools to transfer data and applications from my old mac to the new one.
    When I lauch Aperture it always ask me to write the license key. I do it and can start to use Aperture.
    The problem is that this settings is not saved and I have to put again the serial key everytime I launch Aperture.
    I use the last version of Aperture 3.
    Thanks in advance.

    You may have a corrupted "ProAppSystemID" file or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
    Regards
    Léonie

  • Office mac keeps asking for license key with fusion drive

    I'm posting this in case anyone else is having this trouble where Office for Mac 2011 keeps asking for the license key. I have a later 2013 iMac with Fusion drive and never have been able to use office on this computer without entering the key. In talking with Microsoft they removed office and all the files and reinstalled with no help. In speaking with Apple, they said there is a known issue with Microsoft Office and the Fusion drive and Microsoft is working on a patch. Evidently the fusion drive moves the files around and to Microsoft that looks like new hardware so it prompts for the key. Realy annoying! Microsoft

    I'm a certified Apple consultant and I recently hit this issue at an installation. On seven iMacs with the Fusion drive, I deleted the "Thunderbolt Bridge" interface from the Network System Preference. We then rebooted the computers, entered the product key one more time, and so far, the problem has disappeared and survives subsequent rebootings.
    Obviously, if you are frequently networking two Macs using Thunderbolt, this isn't a good long-term solution (though it is easily added back). However, it does appear to work. I have no sound theory as to why it works, except that Office might be interpreting the existence of that bridge as evidence that the software was copied onto a machine instead of properly installed. This is just a wild guess, though.
    I have no idea if it will work for others, but hey, the forums are for throwing out these ideas and seeing if one of them sticks for most people. So...there it is.

  • Indesign cs6, subscription, asking for license key

    hi. i bought an indesign subscription.
    i downloaded and installed it via app manager.
    i am logged in as the person who bought the subscription.
    i can't start it - it's asking for a license key.
    i am using win 8 pro.
    i uninstalled my all adobe products on my pc about 10 times and reinstalled them again.
    at first i couldn't even start indesign through the app manager - option was greyed out.
    after about 7 uninstalls and reinstalls it is giving me the licensing stuff.
    update: now after i installed the updates for indesign, bridge and whatever there is no option to start indesign. there is just a greyed out word: "updated". nice!
    please help.

    Snip1236 please contact our support team so they can verify your subscription status.  You can access chat support at http://adobe.ly/yxj0t6.

  • Aperture suddenly asks for license key

    I have used Aperture 3 for a long time. Now suddenly Aperture started to ask licensing during start. I doesn't accept my original Aperture 2.1 license key. For Aperture 3 license key I get message to enter original license key.
    I have had problems with permission rights. Perhaps this has something to do with that?

    I doesn't accept my original Aperture 2.1 license key.
    If you need to contact the support to retrieve your serial number try this page: Pro Application Replacement Serial Numbers
    I have had problems with permission rights. Perhaps this has something to do with that?
    That would explain a lot. Have you solved that permission problem by now? A frequent reason for licence problem is that the preference file is corrupted or unreadable. Then Aperture asks for the serial number, but cannot store it  because it cannot modify the preference file.
    So it might help to remove the    ~/Library/Preferences/com.apple.Aperture.plist file from your User Library to the Desktop; this support article explains how to do it; see the section: Delete User Preferences".
    Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
    This operation will delete some of your settings, e.g. the the sizes of the subpanels in the application window, but all your presets and keywords will be saved.
    Regards
    Léonie

  • Server 2012 r2 Evaluation copy asking for license key?

    So, I'm an old dog trying to learn new tricks - the newest trick being to install Server 2012 R2 Standard with Hyper-V role. After a bit of fumbling around (good story for another time) I have managed to make it to the point of installing the OS onto the
    virtual machine I created. Sweet. My understanding from extensive internet research is that I should now use an ISO image of Server 2010 R2 (an ISO of the Evaluation Copy it seems being universally suggested), for installing the OS to the virtual
    machine and then subsequently change the license key to my OEM license key using the
    slmgr -rearm command. OK, if that is correct I can deal with it. But I have top get it installed first. I have downloaded the following ISO from Technet:
    9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5
    The setup installation starts up fine, but immediately presents a prompt screen for entering the product key. Huh? I thought evaluation copies did not require a product key to perform the installation. It will not accept my OEM product key, so I am
    stumped. Do I have the wrong ISO? I did try a couple of other copies/versions, but they conk out because Windows generates  errors saying something to the effect that they are not the right version for the SCSI Synthetic Adapter. So is there
    maybe some other ISO's I should be trying? Or, is there some place I am supposed to request a key for the ISO eval copy I have? And, if at some point I am able to get the evaluation copy installed, is my thinking correct about using my OEM key used
    to activate the physical host to change the evaluation installation into a regular installation? Or, should be  burning an ISO of my OEM installation disk to install from and use my OEM key directly to activate that when doing setup to the
    VM?

    The eval iso will not accept a oem key, this is by design, oem versions are designed for original hardware only, the eval can be activated with a volume key or I believe a retail key, the licensing agreement is different between the OEM and other
    versions.
    Appreciate your response. After a lot of late night mucking around was able to get a different evaluation copy to load: This one worked (but not without a bit of a struggle):
    9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9
    Initially I could not get this evaluation to load as the virtual SCSI adapter kept generating a system error to the effect:  "Synthetic SCSI controller [...] Failed to Power on with Error: 'The version does not support this version of the file
    format'". Only after moving the ISO file onto the physical drive holding the VHXD containing the VM and messing with security settings on the file did it finally load. This version (vs the other ISO) begins loading by first presenting a list of OS versions
    (standard and datacenter variants) to load. From there on the installation pretty much proceeded as would a normal installation would. This version did not ask for an activation key and when finally installed shows a message on the desktop that it is good
    for 180 days usage (as Microsoft has stated should be the case). I did encounter two additional problems though that had to be dealt with before success was attained.
    1) the install crashed with an error  "Windows cannot find the Microsoft Software License Terms.  Make sure the installation sources are valid and restart the installation" . That was a head scratcher. After another an hour
    of research I came a cross a mention in another forum post about memory issues being the culprit in a similar situation of someone trying to install Windows 8 into a VM. My VM was set to a use dynamic memory with a minimum of 512 MB, which is pretty typically
    recommended in the install guides I have been consulting. Wrong. So, I bumped the minimum up to 1024 MB and the problem disappeared.
    2) The installation halted when asking for the drive where I wanted the installation to be placed. Problem? No available drives were shown to pick from, i.e. the virtual drive defined in the hyper-V setup simply did not appear. Another
    hour of digging online produced a suggestion that the VM install could not recognize the drivers for the raid controller in the physical server. Perplexing. But anyway I loaded a copy of the raid controller drivers onto a USB thumb drive and
    manage to mount the thumb drive as a hard drive in the VM settings after which the virtual drive appeared in the list and the installation managed to successfully complete.
    So, at this point  I have a functional VM operating - albeit with much hair pulling an teeth gnashing along the way. Will spend a bit of time pounding on the system to what else I can break, or breaks on its own. Hopefully nothing because I don't have
    much hair left or many teeth left to lose.  fingers crossed because I haven't tried to activate the VM OS yet.

  • When attempting to open Aperature asks for license number

    When attempting to open Aperature, an info box opens requesting my name and serial number. I searched on Apple solutions and downloaded Aperature 3.4.3 which supposedly rectifies this problem. It did not. Although I have my original purchase receipt for this product, I do not have the original box and hence, the product's serial number. This whole exercise has been most frustrating particularly since it occured without warning and blocks me from using a software that I have purchased. Is there any way to extract the serial number? I'd be happy to upgrade but that path also appears to be blocked. When I attempted an upgrade Apple advised that since the product was already installed, I needed to request an upgrade and as noted, when this was done, I was returned to square one.

    What happened before Aperture started to ask for the serial number? Did you change the hardare in any way? Reinstall the system?
    If the problem is accidental and your hardware and software did not change at all, you should be able to restore the licence by restoring the System Library and your User library from a backup of the time, when Aperture has been working properly.  If that succeeds, write the licence number down. It is displayed in the "About" panel: From the main menu bar: Aperture > About Aperture.
    If you cannot restore the library files from your backup, contact Apple with a proof of purchase fr a replacement serial number:
    See:  Pro Application Replacement Serial Numbers
    What is your current Aperture version btw? Are you asking about upgrading from Aperture 2 or an earlier version of Aperture 3?
    Regards
    Léonie

  • I paid but Premiere Pro CC 2014 is still "Trial" and asking for license key.

    Please help - this is very frustrating and poor service / software performance from Adobe. I have wasted hours trying to resolve this and can't figure it out. I have paid for a "Complete" monthly service but the Adobe app on my computer (Mac, OS Yosemite) acts as though nothing has changed and still refers to countdowns on trials for other software as well. Have I just paid for nothing?

    You have activated the CC once today , hope the issue is resolved, still I would like to mention that
    The CC does not needs any serial number, it is based on Adobe ID.
    In case you are being asked for serial number then you can refer to.
    Creative Cloud applications ask for serial number
    Re: Invalid serial number?
    Regards
    Rajshree

  • LR ask for License Key

    I bought Adobe CC: PS and LR. I installed PS and LR as trial version. After buying the Cloud, PS worked without trial mode, but LR still wants to have a license key, but I got no key. Neither in the mail nor online in my Adobe account. How can I use LR?
    PS: How to contact Adobe via mail? Haven`t found a way to contact them online (that’s crazy)
    thx

    Try uninstalling Lightroom (you can keep all your settings when you do this - it's an option in the uninstall routine) and then re-installing it using the Adobe Creative Cloud Application, you should find it under Apps. Do a re-boot after uninstalling to make sure the CC app recognises Lightroom is missing.

  • Adobe Lightroom asks for License

    After registering to Adobe CC, Lightroom still asks for license key.

    With the introduction of Lightroom in the PS CC package, there are two licensing processes. The original perpetual license which is input manually and the CC copy which gets input automatically by the CC App Manager. If you still have a original perpetual license version or trial installed you just need to uninstall it, the uninstall will not affect your preferences, catalog or user files. Then shut down your system and reboot, open the CC app manager and you should have Lightroom available to download.

  • After Effects keeps asking for a key

    Every time I launch AE CS6 (I'm a CC member) it keeps asking for a key. This is when I select License This Software. It recognises my Adobe ID but not my subscription. I did load a trial version of AECS6 in February is this the problem?
    Prem pro fails to load with error0XC000007b... and AI says up to date but cant find a launch icon. Cant even find the downloaded files. I have spent the whole day on the Creative Cloud trying to get it to work. I have early versions of some of these programs installed is this the problem? I'm at my wits end as I have client projects that need attending to.

    Thank you Vikrant, Firstly the screen shown in your below link which included a video is different to the screen the I get. It is a simple screen that asks Buy this software or license this software. Click License... and it wants a key. 2, I have been a member for 24 hours. 3. I use only one adobe ID. The issue did not happen with Audition CS6.I I deleted all adobe CS6 files using the CC Cleaner. Also deleted the hidden file (OPM.db file). I subsequently D/L AE from the Cloud. It D/L'd, Extracted then Failed to boot. I checked its error report and it was ... WTF?
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 0 error(s)

  • Pages asks for license

    Hi Folks,
    I purchased the Family Pack Box Set w/ iWork09 and have installed it on all of our Macs. All iWork apps work fine on my MacBook, my wives MacBook, but my son's intel iMac will not open any iWork app, even tho it is from the Family Pack. It keeps asking for license number to "unlock" it.
    Any help you can give would be greatly appreciated.
    Adam

    The last time I looked all new Macs came with the trial of iWork. It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This has changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each us.
    Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

  • When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to

    When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)

    It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.

Maybe you are looking for