Open WF , Admin LOGS OFF
Hi Friends,
If I try to open the Resource Workflows (in admin console/ resources/Manage/resource Details/...) of a PROV/RECON resource, a new window open with error *"Either your session timed out or you are trying to access a page without logging in"* and xelsysadm logs off.
the provisioning and recon process is working fine. I'm not able to see the WorkFlow Visualiser.
Pls Help Me Out.
Hi Nitin,
Due to the doubt of previleges only, I installed FMS again on a new machine, in the D: drive. But for no luck.
1. I am running FMSMaster on the console, but not the FMS Admin. Can you tell me the command to run Admin from the console too? I opened the services.msc, and there are only one FMS, FMS admin, and Httpd servies. How do I confirm if FMS ther is no second instance of FMS? Please guide me.
2. I don't think there is any privileges issue while running cmd prompt. Because ealier (before modifying fms.ini and conf) the logs were appearing fine. As soon as I modified the files, and started playing the videos from remote, the logs stopped updating. Here
3. I also divered the logs folder to D:/logs folder by modifying LOGGER.LOGDIR in fms.ini But still the same result. The access.00, core.00, Edge.00, access_log, have the values only before modifying fms.ini and apache/conf files.
I also tried displying the logs using getserverstats but, it gives the following output. Although, I had enabled the getserverstats command in Users.xml
<?xml version="1.0" encoding="UTF-8"?>
<result><level>error</level><code>Admin.API.MethodNotAllowed</code><description>getserverstats - Method not allowed!</description><timestamp>7/9/2012 7:11:31 PM</timestamp></result>
I am attaching the fms and conf files from my FMS. Please take a look, and suggest if there is something glaring in here.
thanks,
Komal
Similar Messages
-
I have Win 2008r2 on an HP DL360 server. The server is used as a Micros BO Point of Sale Server. There are no remote or network users only two administrators who work directly at the server. There is USB printer connected directly to the server. Every time
one of the 2 admins logs off the one and only/default printer "goes away" and must be re-installed at next log on. Any ideas where the problem may be?
Thank youHi,
Are we using a roaming profile?
Before going further, the following thread has the similar issue and we can refer to it for troubleshooting.
Default Printer Lost After Log Off
http://social.technet.microsoft.com/Forums/en-US/9358c8af-2595-4c04-b2a8-32ba5d29ef75/default-printer-lost-after-log-off?forum=w7itprogeneral
Best regards,
Frank Shen -
A window comes up saying "Saving iTunes library" and does not go away. It prevents me from opening iTunes and logging off. I have left it to think over night and it still tries to log off. I have to hard-restart the computer every time this happens. It occurs two-three times/week. Also, when I try to use the task manager to close iTunes, it then prevents me from logging off my computer. My tech department has wiped my computer & reinstalled iTunes and this still occurs. Help?!
Security software? That's a pretty vague question to me. I have Symantec Anti-virus if that's anything like what you're asking about.
If you're not clear on what security software is installed on the PC, check with your tech people to see what you're running. If it includes a firewall, try deleting the existing firewall rules for iTunes and then replacing them with a new rule (or rules) allowing full access to the internet. (Firewall rule interference with iTunes.exe is a known cause of the process refusing to die.) -
If I attempt to send a link to someone from a site I am visiting, ff starts opening one new start window after another. So fast i can't get it stopped. Even going into taskmaster which I sometimes have to try 3 or 4 times, it is impossible to get them all stopped they just keep multiplying. Only logging off or a restart will fix the problem.
The same think happens if I use a "send picture to". I don't know what else to do. I have run all the diagnostics I have. Checked all the drives, etc. Check all the ff settings. Nothing shows.http://support.mozilla.com/en-US/kb/Managing+file+types
Don't set Firefox for '''mailto'''. <br />
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox -
After updating when i close itunes it wont open back up until i log off and log back on or reboot
After updating to latest software when i close itunes it wont open back up until i log off and log back on or reboot. Now I have removed itunes and reinstalled it but same problem
jordN wrote:
This only started happening after I upgraded from Windows 8.1 to Windows 10, I don't have a clue why it does it, but if I close the screen on my laptop and open it, the screen doesn't come back on it just stays off but the power light button comes on and the WiFi signal button is on but it is red as if the wifi is turned off, is anyone else having this problem or does anyone know how to fix it? I have to manually hold down the power button everytime I close my laptop to turn it off and then back on and once it is on it works perfectly, but I don't like holding the power button down for obvious reasons. Thank you.Go back to Windows 10, seems HP do not care about releasing up to date drivers for Windows 10, this is despite the problem you report also happening during BETA Testing of Windows 10 over TWELVE MONTHS AGO! It is only now HP are bothering to advise people not to upgrade, but yet they clearly won't reply in this topic, which is more or less about your problem from many different users! http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-10-Laptop-won-t-go-into-sleep-mode/m-p/5181173#M304826 -
I am unable to download any files without multiple new tabs opening at the top of my screen. I am unable to identify what the tabs are for and can't stop the process without logging off Foxfire completely. FoxFire has also corrupted other files and made them impossible to download (saved files)
Could you check your PDF viewer preference and try changing it to a different viewer to see whether that helps? This article describes how to access that setting: [[How to disable the built-in PDF viewer and use another viewer]].
Unfortunately, the settings file that stores those application handling preferences sometimes contains crossed up settings or settings which Firefox cannot actually implement. In that case, you generally need to rename or remove that file and let Firefox rebuild it. The steps for that are in this article: [[Firefox repeatedly opens empty tabs or windows after you click on a link]] -- skip to the section "Reset actions for all content types". -
when i log off my td bank secure account page with the td log off botton i get a new td page. if i press the back arrow on the address bar the secure page i just closed pops up. when i do the same witn onternet explorer a generic td bank page home page pops up NEVER an account page with secure info shown. when this happens every time i dont know if i have logged off the secure page. i close my online browser[now firefox] to be sure the connection is broken but is the secure page open to any kind of breach? i am using firefox due to concern about intternet explore but i know on explorer when i log off td bank secure page i was on i can not access that page again unlees i login ,on firefox i press back arrow on address bar and the secure page i logged off shows up.i feel this is an important issue and must be addressed. thank you
Hi grdy83,
What are your cookie settings?
*[[Enable and disable cookies that websites use to track your preferences]]
*[[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]
You can delete all history when you exit Firefox, but it seems odd that a secure page that should expire is still accessible. It may be a timed expiration, but check the third party cookie settings to make sure it is not allowed to be saved.
I hope this helps prevent this from happening again. -
When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!
If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced. You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
Ciao. -
Firefox will not open after logging off. Will only work if I reboot computer.
Firefox always opens after booting up my computer in the morning. However, if I log off of Firefox and attempt to open it again it will not open without rebooting the computer first.
Use the [[profiles|Profile Manager]] to create a new profile. If the problem goes away, you can then [[Recovering important data from an old profile|move]] your bookmarks and other important settings into the new profile.
-
I had to log off in the middle of sharing pics to Kodak gallery, now I can't open Adobe?
I had a problem and logged off my computer and I was in the middle of sharing pictures to Kodak Gallery. Now when I try to get on to Adobe Photoshop Elements 8 I click organize where I used to get it to open and nothing happens. I know that they are there because I can see my online storage amount listed. Can you help me to open it?
See this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#Reset_the_Organizers_online _services -
Chat window stays open even after i log off
When ever i log off with a chat window open...it stays open when i log back on. Is it possible to not do that, Leopard never did that???
Hi Carolyn and Lud@,
I must admit I would have suggested that as well.
If the iChat 4 setting for Remembering Chats had been set there is nothing in iChat 5 to reset it.
In Theory clearing the window and Quitting iChat should delete the item from the .plist
Deleting the said .plist and restarting iChat would have caused iChat to recreate the .plist from Defaults and the Remember Chats Across Launch item would not be there.
What we could do with knowing now is, does the Window have any info at the top as to who and/or what room the chat is associated with ?
It may pay to check the File Menu of iChat to Check if this "Chat" that keeps popping up is in the Recents lists.
8:33 PM Tuesday; September 1, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Blank page opens and not able to log off
Hi All,
I am using MSS. There are 2 issues.
1) One of my user has received a task in UWL. When he tries to open that he is getting a blank page. In R/3 the structure and all the things are fine.
2) Also when he clicks the log off button dialogue box prompts to select yes or no , he gave YES but still it not getting logged off.
I tried deleting cookies , temporary files and turned compatibility settings on to " "Display all websites in Compatibility View" but of no use.
Please suggest on this.
Thanks!
SwarnaprakashHi Swarnaprakash
Might be some problem with browser, try accessing with the compatible browser and then check it. check the browser compability in service market place PAM. http://service.sap.com/pam
Also check the default trace log file and search for the userid
Best Regards
Arun Jaiswal -
Hi,
Problem Description:
After installing my new product version, when user does log-off and log in again into admin account
or switch from admin account to non-admin account, PATH environment variable shows incorrect path of my product (previous product version’s path) using command prompt.
It seems windows refresh issue during session changes (log off and log in / switch from Admin to
Non-admin account).
Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
Please see my thread for more details http://social.msdn.microsoft.com/Forums/vstudio/en-US/445ab42c-bdff-405a-8d53-558e1b6c7d34/path-environment-variable-issue-when-user-logoff-and-login-or-switch-from-admin-to-nonadmin?forum=windowsgeneraldevelopmentissues
Also submitted bug for this in connect.microsoft.com portal.In that it has lots of information
like problem statement, Reproduction steps and Expected Results.
Bug ID: 871782
Could you please any body help me for this?. your support will be appreciated.
Thanks,
MarichamyWhy PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
I wouldn't have any expectation of what you are doing to work the way you expect. E.g. why is the %ABC% being replaced at all? There is some help about this ambiguous scenario in the cmd help...
/V:ON Enable delayed environment variable expansion using ! as the
delimiter. For example, /V:ON would allow !var! to expand the
variable var at execution time. The var syntax expands variables
at input time, which is quite a different thing when inside of a FOR
loop.
/V:OFF Disable delayed environment expansion.
So, what's the setting for the /V: switch that your users would be using? Perhaps you should be using the ! instead of the % for your ABC variable?
Oh. There's more below where I found that...
Delayed environment variable expansion is NOT enabled by default. You
can enable or disable delayed environment variable expansion for a
particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You
can enable or disable delayed expansion for all invocations of CMD.EXE on a
machine and/or user logon session by setting either or both of the
following REG_DWORD values in the registry using REGEDIT.EXE:
HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion
and/or
HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion
to either 0x1 or 0x0. The user specific setting takes precedence over
the machine setting. The command line switches take precedence over the
registry settings.
In a batch file the SETLOCAL ENABLEDELAYEDEXPANSION or DISABLEDELAYEDEXPANSION
arguments takes precedence over the /V:ON or /V:OFF switch. See SETLOCAL /?
for details.
If delayed environment variable expansion is enabled, then the exclamation
character can be used to substitute the value of an environment variable
at execution time.
So, I guess the essence of your "bug" will boil down to whether you
need the feature to get the result you want and the
truth of that first sentence but it certainly looks like a "can of worms" to me. ; )
HTH
Robert Aldwinckle -
After having installed iT 10.5 on Windows 7 iT starts without any problems. After quitting iT however, it cannot be restarted without logging off and logging on again. Anybody have a solution/fix ?
If you are not using WIFI SYNC, there is a temporary fix:
1. Check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
2. Go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. Rename file "APSDaemon.exe' into "APSDaemon1.exe" from this location:
32bit Windows C:\Program Files\Common Files\Apple\Apple Application Support\
64bit Windows C:\Program Files (x86)\Common Files\Apple\Apple Application Support\ -
How do I "Permanently" uncheck the box "Re open windows when logging back in"?
At this time there is no reliable way to permanently unselect that option. A quick way to unselect it just before logging out is to tap the space bar.
Maybe you are looking for
-
Print of work order before release
Hi, Is it possible to print a work order before releasing it. What customization/changes can be done to do this ? Regards, Vivek
-
Installation of CS6 Web & Design Premium in Windows Multipoint Server 2011
Hi all, I am trying to install CS6 Web & Design Premium in Windows Multipoint Server 2011. But I am always getting the PDApp.exe crash message and can't even get into the installation wizard. Can anyone help me in resolving this problem? Actually I h
-
Windows 8 + external touchscreen monitor + Adobe Reader full screen = disaster
when you touch a full screen Reader document, it goes out of full screen mode, no matter where you touch it... why?
-
Adobeform: Need to print a static text on backside of every page.
Hi Experts, My requirement is to print a Static text on backside of everypage through Adobeform (duplex printing). that is front pages of my output will have item data and on the backside of every page i have to print a static text. the output can be
-
TS1702 Application was a fraud and it's not doing what it's supposed to do
I ordered phone tracker gps The company is photo off the wall!! You are tricked to paying 1.99 and the only thing u can track is your own number, no matter what number you put in!!! I want a refund