Open Window Action Stopped Working

I've been happily using Daverj Open Window 2.1 for years with GLCS2 and never had a problem, well that is until today. For some reason the action(s) just won't work. I've check the code and it looks correct (not that I'm an expert by any stretch).
The odd thing is that any of the older pages I have using this all work just fine both on the client and server side. I can load an older page into the browser from GLCS2 and the actions work, but if I do the same with a page and a newly applied one it doesn't. Any suggestions would be greatly appreciated.

Nate,
You and Jon are pretty good at this stuff where as I am a few clicks below bad ;-) There is a fair amount of JavaScript on the page, but it's all working fine. The problem comes into play when I add the action(s) from GLCS2. You will see that there are links and I'd like to turn them into pop-up windows. When I try the problem occurs.
This is a link to the page where I want to put the actions on. Now try and remember I'm just passable at this stuff. So go easy on me. . . ;-)
http://www.josephfusco.org/Calculators/Simple%20Roof%20Calculator.html

Similar Messages

64 bit Win 7, Itunes 10.5. Can open Itunes and play music, try to open store and it says "Windowa has stopped working" and closes both Windows and Itunes?? Worked beofre I updated to Itunes 10.5 Tried so many things!! HELP!

Have Windows 7, 64 bit. Updated ITunes to 10.5 and now I cant open store? I can play music but when trying to open store, or anything else, I get :
"windows has stopped working and is shutting down" and then Windows and ITunes close?? I have tried so many things?? Help!!

Yeah, I wrote this wrong. Its ITunes has stopped working and Windows is trying to solve problem, then shuts down.
I have un-installed , re-installed. Tried earlier version and that wont work any more. Changes firewall, pop-ups whatever...........nothing works. And Apple has been no help. Run test and it says all test are good even to Apple store??

Open Window 'Action' does not work in Explorer

Mac 10.4.11 G5 GLCS1
I have created a Open Window action (see attachment) that works fine (if not in very sophisticated way) in Safari and other Mac browsers, it also works fine on PC popular browsers with the exception of Explorer. See for your self at http://www.breweryartists.co.uk/pages/buyaposter3.html
As Explorer is an important browser on the PC I need help to overcome this problem.

I'm on CS2 so I cannot tell if something was broken in CS1. This function works fine in CS2.Does it work for you if you create a new blank page with only this action on it?
Instead of wrangling a lot of bloated javascript, why not craft only what is needed?
http://javascript.internet.com/generators/popup-window.html

Bookmark Open File Action not working on MAC OSX

We are getting the following error when trying to open different files that start find in Finder:
could not find an application to open the file 'xxxxx'
We tried a simple MAC OS Application.app file, a terminal app script and in both cases we get the above error. These same files start up without issue on a click in Finder.
The Open File action "DOES" work on an Microsoft Office File... but does not work for a Mac Application.App file or a AppleScript script file.
Can anyone share how to get Open File to work with some type of script file or application file on the MAC OS with Adobe Reader 11 ?

We ended up having to create an App on the MAC OS with an "associated" file type and then use the Bookmark Open File Action on files of that type. This followed what worked for opening Office files on the MAC from the Bookmark Open File Action.
My question was ... on Windows we could use the Bookmark Open File Action to open up "applications" or "bat scripts" directly... but this does not appear to be supported on the MAC. We could not "start" an app or a script directly from the Bookmark Open File Action. We had to set the action to open a file and then handle that file in the associated application we created for that filetype on the MAC.
Thank you for your question,
James

Open Window Action/Behavior

I am use to creating an open window action in GL CS that uses a normal link to the page plus target="_blank" so that if the user has JS disabled, it will still open in a new window, though without cool JS specs.
However, I can not get this to work the same in DW CS3. When I set the open window behavior up in the "same" way, it both opens a new window set by the JS as well as opening a new window in accordance with the target instruction.
Here are examples:
GL: http://www.marketingdurango.com/tests/openwindow.html
DW: http://www.marketingdurango.com/tests/dwopenwindow.html
Other than creating this in GL, then cutting and pasting the script into DW, what can I do to make this work "correctly" when created in DW? Is their another behavior somewhere that will work the way I am use to?
Thanks,
~Nick

Hi Nate,
There is no onclick=event that I can find in the DW version. In fact, there is hardly any JS code at all--at least in comparison to the GL version. So, I have no clue how to add a return false. I do understand the philosophy, but JS is currently beyond me.
Here's all the code there is:
(in the head):
< script type="text/javascript">
< !--
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
//-->
< /script>
(in the body):
< a href="http://www.durangoherald.com" target="_blank" onclick="MM_openBrWindow('http://www.durangoherald.com','','toolbar=yes,location=yes,stat us=yes,menubar=yes,scrollbars=yes,resizable=yes,width=100,height=100')">testdw< /a>
Thanks,
~Nick

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

TS4000 reminders on my PC (windows 7) stopped working in outlook 2010 after icloud was installed

reminders do not work on pc (windows 7) stopped working in outlook 2010 after icloud installed

Have you tried a re install of iCloud Control Panel ?

Hide/Show Dynamic Action Stopped Working

Good Morning,
Once I upgraded my application to Apex 4.2.2, my dynamic action stopped working. It worked fine in 4.1.
I also used javascript to hide/show my fields.
code below
<script language="JavaScript" type="text/javascript">
function onPgLoad()
//hides reporting select, unless certain utcs are selected they are selected
var ForceGenUTCSrch = $v('P310_FORCE_GEN_UTC_SRCH');
var RptMenu         = $v('P310_REPORT_MENU');
if (RptMenu == '1'&&(ForceGenUTCSrch == '0GTAA' || ForceGenUTCSrch == '8MMUB' || ForceGenUTCSrch == 'CCMAR' || ForceGenUTCSrch == '0GQGC' || ForceGenUTCSrch == '0GQGB' || ForceGenUTCSrch =='3NNNA' || ForceGenUTCSrch == '3PQAA' || ForceGenUTCSrch == 'XMCAS' || ForceGenUTCSrch == '8NJAA' || ForceGenUTCSrch == 'XMMCB' || ForceGenUTCSrch == '9VCBH' || ForceGenUTCSrch == '3PNAA' || ForceGenUTCSrch == '3PLFA' || ForceGenUTCSrch == '3PMAA' || ForceGenUTCSrch == '3NSAA' || ForceGenUTCSrch == '8NHAA' || ForceGenUTCSrch == 'CBSAD' || ForceGenUTCSrch == 'CCVAA' || ForceGenUTCSrch == '9VDLB' || ForceGenUTCSrch == '3NHAA' || ForceGenUTCSrch=='1HDAA' || ForceGenUTCSrch=='0EZ99' || ForceGenUTCSrch=='0JZ99' || ForceGenUTCSrch=='1AZ99'|| ForceGenUTCSrch=='9YZ99' || ForceGenUTCSrch=='CUZ99'))
    var get = new htmldb_Get(null,null,'APPLICATION_PROCESS=PROC_UTC_RPRTG_ORG',0);
   gReturn=get.get();
    $x_ShowItemRow('P310_FORCE_GEN_RPRTG_ORGN');
   else
     $x_HideItemRow('P310_FORCE_GEN_RPRTG_ORGN');
</script>
<script language="JavaScript" type="text/javascript">
function FunSelUTC()
//hides reporting select, unless certain utcs are selected they are selected
var ForceGenUTCSrch = $v('P310_FORCE_GEN_UTC_SRCH');
var RptMenu         = $v('P310_REPORT_MENU');
alert(RptMenu);
if (RptMenu == '1'&&(ForceGenUTCSrch == '0GTAA' || ForceGenUTCSrch == '8MMUB'|| ForceGenUTCSrch == 'CCMAR' || ForceGenUTCSrch == '0GQGC' || ForceGenUTCSrch == '0GQGB' || ForceGenUTCSrch =='3NNNA' || ForceGenUTCSrch == '3PQAA' || ForceGenUTCSrch == 'XMCAS' || ForceGenUTCSrch == '8NJAA' || ForceGenUTCSrch == 'XMMCB' || ForceGenUTCSrch == '9VCBH' || ForceGenUTCSrch == '3PNAA' || ForceGenUTCSrch == '3PLFA' || ForceGenUTCSrch == '3PMAA' || ForceGenUTCSrch == '3NSAA' || ForceGenUTCSrch == '8NHAA' || ForceGenUTCSrch == 'CBSAD' || ForceGenUTCSrch == 'CCVAA' || ForceGenUTCSrch == '9VDLB' || ForceGenUTCSrch == '3NHAA' || ForceGenUTCSrch=='1HDAA' || ForceGenUTCSrch=='0EZ99' || ForceGenUTCSrch=='0JZ99' || ForceGenUTCSrch=='1AZ99' || ForceGenUTCSrch=='9YZ99' || ForceGenUTCSrch=='CUZ99'))
     //alert(ForceGenUTCSrch);
    var get = new htmldb_Get(null,null,'APPLICATION_PROCESS=PROC_UTC_RPRTG_ORG',0);
   gReturn=get.get();
     $x_ShowItemRow('P310_FORCE_GEN_RPRTG_ORGN');
   // $('#FORCE_GEN_REPORT1#').show();
   else
     //alert(ForceGenUTCSrch);
     $x_HideItemRow('P310_FORCE_GEN_RPRTG_ORGN');
    // $('#FORCE_GEN_REPORT1#').hide();
</script>
javascript: onload="onPgLoad();"I kept the code just in case I needed it @ a later time.
My Dynamic Action
Event: on change
item --> :p310_force_gen_utc_srch (this is a select list that submits)
conditon --> in list
value --> '0GTAA', '8MMUB', 'CCMAR', '0GQGC', '0GQGB', '3NNNA', '3PQAA', 'XMCAS', '8NJAA', 'XMMCB', '9VCBH', '3PNAA'
True Action --> show :p310_force_gen_rprtg_orgn
False Action --> hide :p310_force_gen_rprtg_orgn
They both fire on page load.
The :p319_utc_srch has submits the page because the :p310_force_gen_rprtg_orgn lov runs a query to pull back that units reporting orgs only.
Please help me figure this out.
Thanks,
Mary
Edited by: MaryM on May 10, 2013 10:52 AM

Hi Mary,
So you changed from the code presented to a DA ? I'm not clear as to exactly happens or doesn't happen.
Do you know if your AJAX calls are failing?
If you use a Console like the one on Firebug or Chrome you can inspect what's being send and what's being returned.
I mention this because your htmldb_Get calls looks suspicious.
var get = new htmldb_Get(null,null,'APPLICATION_PROCESS=PROC_UTC_RPRTG_ORG',0);I would change it to
var get = new htmldb_Get(null,$v('pFlowId'),'APPLICATION_PROCESS=PROC_UTC_RPRTG_ORG',$v('pFlowStepId'));That would pass the app_id and the page_id that is calling. Although this is probably not your current issue.
See if you can find some javascript error. It's possible that this is a timing problem as to when the code is defined and when it's loaded.
Thanks
-Jorge

I re-installed my Mac OS, but now Elements won't open. Licensing stopped working. Error code 150:30

I re-installed my Mac OS, but now Elements won't open. Licensing stopped working. Error code 150:30.
This is Photoshop Elements 8, and I have the original disc with serial number so I can re-install that.
The probelm is I'd need to de-cactivate the serial number before un-installing, and I need to open the programme to do that.
Any ideas?
Thanks

Okay, I've found that this is a recognised problem.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Error "Licensing has stopped working" | Mac OS
and all the solutions tell me to find the folder FlexNet Publisher in my library.
Problem is FlexNet Publisher doesn't seem to exist there. Can't find it anywhere on my hard drive.
Gettting down to the end of that page gives me the following info....
The FlexNet folders and files required to run Adobe applications can become corrupted or have permission problems if moved from one machine to another. They can also be damaged through a Time Machine system restore. FlexNet service licensing failures cannot be resolved by reinstalling the application or by using the Adobe CS5 Cleaner Tool. If permissions issues prevent the FlexNet licensing service from launching, accessing data, or communicating with Adobe processes, a licensing failure occurs.
Well it looks like backing everything up using Time Machine may have caused all this problem. Anyone know how to get Flexnet Publisher back?

CC Ball Action stops working when I try to use a mask

Using AE CS6 on mac os 10.7.5. I'm trying to use CC Ball action to make a cool particle animaation. In order to do the animation I'm trying to create I need to use a mask. Every time I use a mask the cc ball action stops working. It's still in the timeline and shows to be visible but the image is unchanged. Even if I delete the mask the effect remains invisible. In order to get the effect to work again I have to delete it and re-apply it.

You are in the layer viewer and have to pick what to view in the pop-up in the right bottom corner...
Mylenium

Windows explorer stopped working in a VDI environtment for a specific user only

Hi we have a VDI environment with a link clone image for all users. Only one user(admin1) login to the virtual desktop got this error, ....windows explorer stop working and requires restart it. it is the same issue after restart it, change a PC, change another
VDI client version,always same issue. Tried other users with these pc and client and has no issue at all. All use the same pool,same snapshot and same image. Windows 7 32bit OS. also tried to delete the profile folder and let it recreate it , it's redirected
to a file server. the folder can be seen created,but empty inside. other user profile all ok. this user admin1 is a domain administrator. It's property in AD shows an extra "delegation" tab and all else look the same as other account. Since other
users ok, I believe it's not VDI issue, should be this windows user profile issue. any advice please?Thanks
Thanks and best regards, -- KF

Hi,
Please first take a try to run SFC /Scannow command under the user account;
Further, we may take a try to fix the user profile through the steps mentioned in the below article:
Fix a corrupted user profile
For the error message about Windows Explorer has stopped working, here is a KB article talking about it:
Windows Explorer has stopped working
The issue might be caused by some applications or services running under that user account, please try the method mentioned in the above article for detailed troubleshooting.
Best regards
Michael Shao
TechNet Community Support

IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE TH

My Firefox crashed with important information on it!!!
My Firefox has been crashing every day sometimes several times a day. I have emailed your staff back many times looking for a reason for the crashed without any response. I have been able to get by because I would restore the settings and continue what I was doing. WELL….this last crash has disappeared from any way of getting it back and IT HAD SOME REALLY REALLY IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE THAT OPEN WINDOWS FOR ME. IT IS REALLY IMPORTANT!! I NEED SOME DESPERATE HELP NOW!!
Thanks,
Nick

Nick, sorry to hear about that. I'm not sure where you are sending the emails, but if you use the form to submit your crash information, that goes into a database for review by the developers instead of coming to the support volunteers here.
Did you try the History > Restore Previous Session command? Firefox sometimes saves form data in the session history. This data may age out, so you should use that menu item as soon as possible.
Going forward, consider installing the [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/ Lazarus: Form Recovery] extension if you are filling long forms and Firefox is unstable.
With respect to the crashes, there are many possible reasons for Firefox to crash. Have you reviewed the help articles for diagnosis? For example: [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]].

Windows explorer stopped working everytime i plug my iphone. how can i resolve this problem?

windows explorer stopped working everytime i plug my iphone. how can i resolve this problem?

http://support.apple.com/kb/TS1538

Windows explorer stopped working when trying to open a specific folder...and solution

I have had a problem with a specific folder or two on my computer, when I open the folder I get the error message that windows explorer has stopped working. It only happens with specific folders and everything else works fine.
I did a lot of reading to figure out a fix.
I finally tried right clicking the program explorer.exe located in C:Windows and chose "run as administrator" and this fixed the problem.
Note that the error message details list an application crash of windows.exe
I thought I would post this to help others. I don't know if this is the same problem some folks describe with a continual loop of the error message, problems opening the control panel or problems upon start up. But if you have a similar problem to the one I described try this very simple fix.
Cheers

I don't know what OS you are running, but under Windows 7 RC build 7100 the selection was ghosted to "run as administrator".
I was able to stop the problem from happening by right clicking the folder I was having problems with, selecting properties>customize tab and changing the "Optimize this folder for:" from Videos to General Items.
I know that this particular folder was optimized for general items from the beginning as I had just folders inside which were filled with videos. When I started to move videos into this parent folder to separate them later, this parent folder switched by itself
to being optimized for Videos. I'm not positive but I think that this was the time I started to have a problem with this folder until I did what I described above.
This is my very first post, so I hope I explained things well enough to be of help to someone.
Thanks
That's fixed my problem. Stopped responding every time I opened My Videos, changed the file properties to optimized for general and now the icons aren't thumbnail big but it doesn't crash now... Thank you, it was really starting to bug me.

Itunes wont open. itunes has stopped working message Please help!!

I had itune 10.1 working just normal, and suddenly it wont open.
even before that, 1st problem i had was with Quick time, i couldnt uninstall it, kept saying newer version of Quick time installed..or something like that. and i figured out to install itunes without unstalling quick time. (thanks to Google) and was working fine for a month, and suddenly, now iTune wont open. I tried unstalling it, and reinstalled... that's pretty much i can do now!! still no hope!! (btw, I use Vista, 32bit!) Please help me... here's what Problem report shows..
" stopped working"
Problem Event Name:
BEX
Application Name:
iTunes.exe
Application Version:
10.6.1.7
Application Timestamp:
4f71aced
Fault Module Name:
cryptdlg.dll_unloaded
Fault Module Version:
0.0.0.0
Fault Module Timestamp:
4549bd25
Exception Offset:
69431040
Exception Code:
c0000005
Exception Data:
00000008
OS Version:
6.0.6002.2.2.0.768.3
Locale ID:
1033
Additional Information 1:
fd00
Additional Information 2:
ea6f5fe8924aaa756324d57f87834160
Additional Information 3:
fd00
Additional Information 4:
ea6f5fe8924aaa756324d57f87834160
and another report: "stopped responding and was closed"
Description
         A problem caused this program to stop interacting with Windows.
Problem signature
Problem Event Name:    AppHangB1
Application Name:    iTunes.exe
Application Version:    10.5.0.142
Application Timestamp:    4e9243f2
Hang Signature:    6a2d
Hang Type:    2048
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    1033
Additional Hang Signature 1:    579344e9ab62a3902d6e00f558f404ca
Additional Hang Signature 2:    1748
Additional Hang Signature 3:    8fb4784d6c7db48473361b5a4e821ea6
Additional Hang Signature 4:    6a2d
Additional Hang Signature 5:    579344e9ab62a3902d6e00f558f404ca
Additional Hang Signature 6:    1748
Additional Hang Signature 7:    8fb4784d6c7db48473361b5a4e821ea6
PLEASE HELP ME..... MUCHO GRASSYASS!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Open Window Action Stopped Working

Similar Messages

Maybe you are looking for