Open with another application

Is it possible to open a photo with another application, without a pre-conversion to tiff by Lightroom? I love Active D-Lighting, it saves me a lot of shadow/highlight recovery, but Lightroom doesn't support it. I edit most of my photos with Capture NX, but I use Lightroom to catalog them and edit others. I can't find a way of opening a nef file directly in CaptureNX from Lightroom.
Thank you.

You can open a photo with another application, but not from within Lr (except for Photoshop). You can open NEF on Capture NX by locating it in your OS (Mac Finder / Win Explorer) and go <Open with> but there is no way to do that from within Lr.
And, when you open a NEF in Capture NX that has previously been edited in Lr the edits will not be visible in Capture NX. And the vice versa is also true: if you edit a photo inCapture NX these edits will not be visible in Lr.
This is so because both programs write the edits in a proprietary format that can only be read by the program writing it. Apart from that Lr stores the edits in its catalog which can only be read by Lr.
It all comes down to the following: You either edit in Lr or you edit in Capture NX, but a cross-over editing is not possible - unless you create a TIF after the edit and open that in the other program. By creating a TIF the edits are written into the image pixels which then can be read by any photo editing software - if it can open and read TIfs that is.
BTW: The Active D-Lighting works only if you shoot JPGs - as far as I know. Far better would be to shoot Raw and edit the highlights in Lr.

Similar Messages

My application wants to open with another application

I have never had this problem before and can't figure out how to correct it. When I went to my Photoshop 7.0 folder to open Photoshop, I saw that that application icon was NOT the usual icon for Photoshop. This was also true for ImageReady. They appear as blank sheets of paper. They will not open either application.
When I click on the Photoshop Icon to get info, it says that it is an application (Power PC) - and lists the correct version etc. Under Name & Extension it lists Adobe Photoshop 7.0. Here is where it gets odd - the Open With window is there and is set to Script Editor (2.1.2) It also gives me the choice of Automator Launcher.app, Automator.app, Easy Card.app and Microsoft Language Register. The same is true for Image Ready. Of course this window option shouldn't be there at all. I trashed the entire program and reinstalled
and the same thing happens. I checked my backup on an external drive and it has changed. I use these programs all of the time and this just happened in the past week. I just can't figure out what happened or why. Can someone please help me get this resolved. Thanks.

Hi RLS_NJ, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If it still doesn't work try Reset Launch Services...
http://www.thexlab.com/faqs/resetlaunchservices.html#Anchor-Reset-47857
Reboot.

I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file. It says that I cannot complete this action because the file me be open in another application, but it is not open in another

I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Could not save as - The file may be read-only or is already open in another application

Can anyone think of a reason why if I'm working locally on a CS3 Flash .fla on my C: drive that I would get the error:
Could not save as: C:\Users\John\Desktop\Project_File\ANNUAL REPORT RELEASE\01-19-11\report_stragegy.fla
The file may be read-only or is already open in another application. Save using a different name, or close the document and try again.
I'm running Windows 7 Home Premium 64-bit.
It happens sporadically. I haven't been able to find a reason why this error pops up when saving some of my .fla files!!
The files are not set to "read only" when I right click on them and choose 'Properties' in the Windows 7.
I found some somewhat similar situations with saving errors:
http://board.flashkit.com/board/showthread.php?t=796857
http://forums.adobe.com/message/2980090?tstart=0
http://www.actionscript.org/forums/showthread.php3?t=153738
Thanks

Sometimes I can save with a different file name. But sometimes I can't and start a new blank document and cut and paste from the one that won't save to the new untitled document.

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Lightroom won't open, says it's open in another application?Lightroom won't open, says it's open in another application?

Lightroom won't open, says it's open in another application..

Depending on your operating system, use Windows Explorer or Finder to open the folder containing your catalog. In that folder you will find a file with the same name as your catalog, but with the .lock extension. That file needs to be deleted, and then you will be able to start Lightroom.

Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

How to fix this problem
"Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
I believe your problem will be something like that.

File Open By Another Application

I am trying to use an application to Sync files on 2 different IMACs across a Local Network. Many of the Syncs are failing because the Application claims that Files are exclusively Opened by another Application. I know that this is NOT true since I have NO other applications running. Is this an issue with the Application I am using to Sync the Files (ChronoSync) or is this a MAC OSX issue? Is there a recognized “Best” way to sync 2 IMACS both running OSX 10.8.3 across a Local Network?

Thanks for that Sarthak,
I don't have a USB drive but can confirm that I can save files when the file is on the mac desktop or on a USB stick without any issues.
So yes, at this point I think the issue is confined to Firewire drives (at least on my system which is 10.5.8).
Cheers
Ben

Lightroom 3 cannot open because another application already has it opened.

Lightroom 3 cannot open because another application already has it opened. I received this confirmation after sending photo files to my E Book. Please help.

Look in the folder where your catalog is and remove the file with a .lock extension. That should do the trick. The file is to prevent two openings of the same catalog and is usually left when Lightroom is closed incorrectly.

CS5 - Can't save to firewire drives "file open by another application" error

Hi There,
We can't seem to use Fireworks CS5 with external drives. If we have a file open and try to save back to the disk, we receive an error saying it could not save because the file is open by another application - "Save As" seems to work though.
Is any one else experiencing this or have a fix?
Cheers
Ben

Thanks for that Sarthak,
I don't have a USB drive but can confirm that I can save files when the file is on the mac desktop or on a USB stick without any issues.
So yes, at this point I think the issue is confined to Firewire drives (at least on my system which is 10.5.8).
Cheers
Ben

Cookies (working with another application)

Hello,
I am currently working on a project. I finished everything in the project but there are many requests to bypass the login page. Currently users log on to a facutly site which then gives them the link to my application. The password for the faculty site and my own differ. They are requesting that the login page can be avoided when opening the application from the faculty site.
I read a similar thread at Re: How to co-work with another application with Cookie or something
So, the faculty page would authenticate. My application uses the same database, but should work well as is. There is no transfering of information between applications. Basically all my application needs to do is log the user in automatically.
I believe this is done via cookies. I've tried some OWA_COOKIE procedures, but I think I am doing it all wrong. It is an area that I've never covered.
Any help would be great. Thanks
-Tim

On a further note,
I used the same logic as in the thread Re: How to co-work with another application with Cookie or something
On page 150 I set the cookie using:
begin
owa_util.mime_header('text/html', FALSE);
owa_cookie.send(
expires => sysdate+10,
name=>'TEST',
value=>lower('testing'));
wwv_flow.g_unrecoverable_error := true;
owa_util.redirect_url('f?p=&APP_ID.:200:&SESSION.');
exception when others then null;
end;
Then on page 200 I read it using:
declare
v varchar2(255) := null;
c owa_cookie.cookie;
begin
c := owa_cookie.get('srprt');
:TEXTFIELD1 := '';
:TEXTFIELD1 := c.vals(1);
exception when others then null;
end;
this works. So what I would like to do now is read in a cookie from the other site. Is this at all possible?

Could not complete your request because the file is already in use or was left open by another application

the message :could not complete your request because the file is already in use or was left open by another application, comes up when i try to open a specific file in PS cs5. nothing is open and i have restarted my imac already and still no solution

Well, then you do want your layered file back and the nice thing about Macs, Time Machine does keep hourly backups on your Mac. You should be able to enter Time Machine and restore that file.
I had hoped opening your file in another app might relase it so you could open it in PS.
Gene

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch" The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

This link needs to be opened with an application send to???

Hey everyone, I'm trying to download the free trial of Acrobat XI Pro and it says Launch Application and then it says This link needs to be opened with an application send to: underneath it it says CreativeCloud(URI Handler) Then it says Choose an application I click choose and it gets me to a folder Programfiles (x86)>MozillaFirefox I press an exe and it says error- then I go to the the creative cloud for desktop and I press Try for Acrobat XI Pro and right before it ends the process I get this message:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s)
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 {9E0AF030-AC6B-11E0-8837-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\ero\AppData\Local\Temp\{950447E1-14EE-4CC4-8449-6C87F90B0589}\Acrobat_11_0_0_CC M_MUI\Adobe CS7\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1359.An internal error occurred.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1359.An internal error occurred.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
The Error 1603 and The Error 1359 keeps reappearing on my attempt to download Skype.. Does anyone have any insights on this?
Thanks for reading!

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Open with another application

Similar Messages

Maybe you are looking for