Open with... on LabVIEW files doing strange things

I have LabVIEW 2010-2012 installed. I am using Windows 7 32 bit. If I right click a VI and go to open with... it always shows 2010, and will either show 2011 or 2012 depending on which I had open last. If it shows 2010 and 2011, but I go manually open 2012 from the start menu, then when I right click a *.vi file and select open with... it shows 2010 and 2012 instead. Now, if it's showing 2010 and 2011 and I choose open with, choose default program... and select LabVIEW 2012, nothing happens. What I've had to do in this case is open 2012 then choose file-> open... and browse to the VI. Has anyone had this problem or does anyone have suggestions? I think I've had this issue the whole time 2012 has been installed, it's just now I've gotten to the point where I'm sick of dealing with it
CLA, LabVIEW Versions 2010-2013

Personally, I like to use the LabVIEW Shell Launcher found over on LAVA. It will open the version of LabVIEW the VI was written in.
http://lavag.org/topic/12241-labview-shell-launcher/
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

IPhone 4 does strange things

one of my phones keeps doing strange things. First the bluetooth stops working (even when settings are on), then Find My iPhone then stops working. iPhone shuts down for no reason during usage, etc. the list can go on. I have rebooted, updated, etc. to no changes. Ideas????

A little long but this thread might help with the 1013 error... http://discussions.apple.com/thread.jspa?messageID=12632690&#12632690

WRT54G ver.7 does strange things

hello everybody!
i've bought a WRT54-G (ver.7) router about 2 years before, but it does strange things
1. sometimes i can't see the admin interface. i type 192.168.1.1, give
password, but i can only get a white, blank page without any text. when this
happens, just a router & modem restart or reset can help.I use the network
every day, through weeks...but it happens in about a few days. why does it
do it? i need it everytime!
2. three computers connected to the router, 2 with UTP cables, 1 via WiFi.
If the computer with wifi is working and one of the "UTP computers" too,
then the 3rd computer (with UTP) only see limited connectivity, but 2 dhcps
are enabled in the router settings, with 2 static DNS..I use WEP2 security
to my wirless connectivity, and only just my notebook's MAC address is
enabled to use the network. my router's password is not default, so nobody
can steal my bandwidth.
i can't find newer firmware verison than ver. 7.00.4..i've bought it with this version
i don't use any firewalls, windows firewall is disabled too
thanks for your answer!

Have you tried to reset your Router and Re-configure all the settings on your router back again. If not please do it now, Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...Now re-configure your router.....

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

P.S. Site is http://www.coldwatercreek.com

PSE 11 Orgaziner to open with a specific file.

Like that PSE 11 Orgaziner opens with a specific file, like it did with PSE 9, 6 etc.
Anybody knows how to do this??

Are these jpegs? If so make Organizer the default program by right clicking on any jpeg file in one of your folders and choosing.
Open With >> Choose Default Program >> Browse
Navigate to:
"C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"

I installed ADE and when I try to download ebook it tries to open with Adobe reader and does not give option to open with ADE

I installed ADE and when I try to download ebook it tries to open with Adobe reader and does not give option to open with ADE

It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this.

CC14, all files open with asterisk in file name.

CC14, all files open with asterisk in file name, need to save or cancel to close file. Is there a way to change that?

No. It happens to any InDesign file. I created a new file in CC14, saved, closed, opened and it had the asterisk.
If it is a time synchronization, how do I correct that?

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

The dock in Maverick is doing strange things to word and excel files

For years (and Mac operating systems), I have kept Microsoft word and excel documents on my doc. I use these documents frequently...click on the file icon in the dock, it opens, I edit and save. Click on the icon again and the saved document opens. so simple.
Since upgrading, I click on the icon, the file opens with a number following the file name (version number I assume) but before docx or xlsx. I edit and save, but get a "save as" box. Now I have to edit the file's name, find the original and replace the original with the new version. Not so simple.
Since I open and close my daily billing log many times a day, this has slowed me down (and irritated me).
I have had no other problems with my Maverick installation and these files are in Word and Excel 2008. This does not happen to powerpoint or any other file I tried so far.
Any suggestions on how to solve this?

Your Mac will generate a new .plist file automatically after restart.
Deleting the .plist file shouldn't delete any app icons from the dock.
Check the startup disk just in case.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys.
From there you can access the built-in utilities to repair the disk using OS X Recovery

In SharePoint 2010 Document Library "Open with Explorer" Your client does not support opening this list with Windows Explorer

Hi.
I am getting below error "Your client does not support opening this list with Windows Explorer" while click "Open with Explorer" option in document library.
My system is client machine which is 32 Bit system and
Web Client service is also running and Window 7 PC.
Other SharePoint sites "Open with Explorer" option in document library is working fine but specific site is giving error.
Even it was working fine but not is giving this error.
Please help me on it. Its making frustrations.
Thanks & Regards
Poomani Sankaran

Hi,
According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
Did you enable the both authentication (Windows and FBA) on default zone.
As far as I remember when FBA is enabled on the same zone when Windows is used, it breaks whole client integration.
So it will be better if you will recheck your architecture and will use different zones for Windows and FBA.
There is also another thing to try: use claims based authentication with authentication provider which will work both with Windows and FBA.
What’s more, you can also check with below steps.
Use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
Add the site into Trusted sites to check whether it works..
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
For detailed steps, visit the following KB page.
http://support.microsoft.com/kb/841215/en-us
There are some similar threads for your reference.
http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett N

There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

Cannot "open with" a htm file with dreamweaver :((

As the title states, I am trying to open my htm files with
dreamweaver, which should work as it worked before on another
computer. However, already when I installed dreamweaver on this
computer I got a message saying that my computer is a little
retarded, as although it's windows xp it does not have the latest
update or whatever.
But anyhow, I don't see how this has something to do with my
problem (but maybe you do?) : If I right-click on the htm file and
then click "open with", dreamweaver is not listed as a program at
all. If I click browse and search for it manually, mark it &
click "ok" it still opens the file with internet explorer.... grr
Did anyone have this problem before? Is there a way to fix
it? Please, I'm very desperate here and your help is very very
welcome!
Thanks a lot!

is this file you want to open a local site folder?
open dreamweaver.
dw menu->site->manage sites
define a new site to the folder that contains this file.
then open the file from the dw Files Panel
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Change Open With for all files with a specific extension

Hi, I've been using OS X for quite some time, but more recently cannot see how you do the following which is proving frustrating:
* Open Get Info for a file,
* Use the drop down under Open With to choose Other,
* Select an appropriate application that wasn't on the drop down list (in this case Smultron text editor for CSV files),
* Press the Change All button and the drop down turns back to Excel which was the previous default.
So basically, how do I change all files with CSV extension to Smultron when Smultron wasn't in the list of Open With items and I have to use Other from the list. This is repeatable for any file type with any application that isn't listed and is on both my iMac and my work's MacBook. Try it yourself and you'll see what I mean!!
Thanks

Stuart Mchattie wrote:
Thanks NeroWolf,
Your solution does work for that single file, but doesn't change the system wide association of that file extension with a particular application. It is because this works that I believe the problem I am having is uncircumventable and is in fact a bug in the OS. Could anyone else confirm this?
Cheers,
Stuart
It might be a bug. What I found is that the icon does not change unless I log out/in or reboot, even when the app normally puts an icon on the file.
For example if I change an audio file to always open with VLC, it does even though the icon remains as before. However, even though clicking plays the audio with VLC, if I right click the file and select "Open With" it still says iTunes (app) default which is incorrect.
Message was edited by: nerowolfe

Can't change "Open with" for multiple files

For some reason, all swfs on my computer won't open in the Flash player that came with Flash 9. If I select 1 swf and set it to open with the player, it will work, however, if I select multiple ones, get info and try to set them all to open in the player (or "Change All") I get a dialogue saying I don't "have privileges to change the application for these documents only. Do you want to change all similar documents to open with the application Flash Player.app?" This is rediculous because I could so this in Tiger just fine. Also, I'm the admin and i'm in MY account, so I should be able to do anything I want, right?
Any insights? I've repaired disk permissions by the way.
Dan P.

This is sometimes a problem with the launchservices database. You can try the following to fix it:
Rebuild LaunchServices Database
For Tiger users
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Support/lsregister -kill -r -domain local -domain system -domain user
Press RETURN.
For Leopard users
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Press RETURN.
If this isn't successful then there may be other problems involved. You can try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can install the freeware preference pane, RCDefaultApp - VersionTracker or MacUpdate - which is useful for extensive control over various file associations.

Open with... on LabVIEW files doing strange things

Similar Messages

Maybe you are looking for