Open your publication at a specific article

Hi,
Is there a way of making a publication that opens at article two rather than the first page? I would like the viewer to be able to start in the centre and effectively be able to scroll left, right & down from the start page.
Best regards
Spencer

A possible workaround is to make the first article a kind of welcome screen with a "Tap to Begin" button. Tapping would then take the user to the middle article.

Similar Messages

HT204088 The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?

The directions you provided above doesnt even work! when I selected "Click to open your account", there is an ERROR message and takes me to no where! when I try to access my itunes account, it says I have no history?

You are not able to view purchase history on your iOS device. You may only re-download previous purchases from the iOS device.
To review your iTunes Store account's purchase history, follow the steps in this article from a computer only:
Seeing your iTunes Store purchase history and order numbers
http://support.apple.com/kb/HT2727

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

Ooops I put the lot in the strap line!
My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
I would be grateful for help!! Obviously...

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Outlook 2010: "Cannot open your default e-mail folders..."

When I open Outlook 2010 I receive the message: "Cannot open your default email folders. There is not enough memory to perform the operation.", after which the program closes. This is on a network running SBS 2003, with about 25 users, and I
am the only with this problem. System resources on the exchange server are fine, so I can only imagine a disk usage quota has been exceeded somewhere. Storage limits for my account looked fine. I've tried restarting exchange services, restarting
the server itself, restarting my desktop, etc etc, to no avail.
This specific problem just started yesterday, but I've been having memory issues for months now. Usually, the Send and Receive dialogue will tell me that there are not enough resources on the server, but mail comes and goes just fine. It's never
simply refused to let me open outlook before, like it is now.
I also tried logging in through another computer and using Outlook 2003, which actually let me open the program, but did not sync mail properly.
Also, we use cached exchange mode, so I tried creating a new ost file, but no dice.
Anyone know what the deal might be?

Hi,
I agree with Don’s guess of damaged PST file or MAPI profile. Analyzed your description(sync mail improperly on another computer and using cache mode), this problem might occur when your Outlook messaging profile includes a Microsoft Exchange account
that is configured to Use Cached Exchange Mode, and you have lots of cached public folders. Usually, this problem occurs when you exceed approximately 1,000 public folders, or a gigabyte of space is taken.
To prevent this problem, keep the number of cached public folders to fewer than 1,000. Or, reduce the number of folders until the error or errors stop occurring. If you are experiencing this problem, delete some public folder favorites by using the Outlook
client. In some cases, if you have too many favorites, you may be unable to delete the folders because the error occurs when you click the public folder favorites folder.
To delete the public folder favorites, follow these steps:
1.Download MFCMAPI from http://mfcmapi.codeplex.com.
2.Run MFCMAPI.exe.
3.On the Session menu, click Logon and Display Store Table.
4.If you are prompted for a profile, select your profile name, and then click OK.
5.In the top pane, locate the line that corresponds to your mailbox, and double-click it.
6.In the navigation pane (left-side pane), expand Root - Mailbox, and select the Shortcuts folder.
7.In the results pane (right-side pane), locate the PR_FOLDER_CHILD_COUNT properties. The value contains the number of public folder favorites.
8.In the navigation pane, right-click the Shortcuts folder, and then select Empty Items and Subfolders from Folder.
9.Keep the default options, and then click OK.
Good Luck.
Tony Chen
TechNet Community Support

We were unable to open your mailbox. Try loading a...

I am unable to log in to my Ovi Mail account, and am receiving an error message; specifically:
'We were unable to open your mailbox. Try loading again.'
I preferred the Ovi Mail service when it was still inhouse at Nokia. Yahoo doesn't even appear to keep an SSL connection beyond initial authentication.
Can anyone advise on how to resolve this issue?
Solved!
Go to Solution.

Getting the same message this morning...
First thing I logged in to check my emails and all was fine - then I sent an image from my phone (E72) via email to myself, and now I can't access my email via the PC...
Is this an issue with Nokia/Ovi as a whole today (I've seen several of the same messages today from different people), or is it something I've done by trying to email from my phone to my PC? (my data cable's not working!)
Cheers...

I have the current iPhoto when I try to open it I get an error message You can't open your current photo library using this version of iPhoto

You can’t open your current photo library using this version of iPhoto.
I am using the current iPhoto and O/S 10.8.2

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.

Recently installed Service Pack 1 in SharePoint Server 2013 Farm, post upgrade we are experiencing issue when opening visio documents:
I am trying to open .vsdx (visio 2013) file but encounter following issue:
Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.
Under Document library-->Library settings-->Advanced Settings
Still I cant open file in browser as we always used to. Unfortunately we don't have Visio services in Farm.
can you share your experiences regarding this issue post Sp1 SharePoint Server 2013.
Thank You

Hi Octopus,
Based on the error message, it seems that the Visio Graphics Service is not started or the Enterprise feature is not enabled.
I recommend to check the things below:
Go to Central Administration > System Settings > Manage service on server > check if the Visio Graphics Service is started > then click Application Management > Manage service applications > check if the Visio Graphics Service application
is created.
Go to the root site settings page of the site where you got this error, click Site collection features to check if the SharePoint Server Enterprise Site Collection Features is enabled.
Go to the site settings page of the site where you got this error, click Manage site feature to check if the SharePoint Server Enterprise Site Features is enabled.
More information about the Visio Graphics Service:
http://tutorial.programming4.us/windows_server/microsoft-sharepoint-2013---looking-at-visio-services-(part-3)---visio-graphics-service-service-application.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I just updated to 4.0.1 and I get the "We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts" However, it just keeps popping back up, firefox never restarts!!!

This morning I had a popup on my Windows XP PC stating that the 4.0.1 update was available. I upgraded. now, i receive the following error: We're sorry. Firefox had a problem and crashed. We will try to open your tabs/windows when Firefox restarts. You can submit crash report data, blah blah blah (which i have submitted several)
But, firefox DOES NOT ever open. It just pops back up with that same report window, over and over.

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Can't open iPhoto after installation .Displays message :You can't open your current photo library using this version of iPhoto

Can't open the program after Installing . Shows message " You can't open your current current photo library using this version of photo.
Made several attemps in fresh instalaltion without any success.

So I assume it is version 9.3, not sure?
Look at the application in the Finde, if you cannot launch it.
Select your iPhoto application in in the Applications folder and use the command "File > Get Info". What does the Info panel show in the "General" brick?
If it says 9.4.3, try to launch iPhoto by clicking the iPhoto icon in the Applications folder. Does that work?

Yet AGAIN! "You can't open your current photo library using this version of iPhoto"

I have read every thread on this topic I could find in these forums, and tried most solutions, and I still can't get iPhoto to work.
Equipment: MacBook Pro June 2010, OS 10.6.8. Bought a Macbook Air February 2012, OS 10.7.2
Not sure why, but I can't open iPhoto. Here's what I have tried.
Original message on MBPro: "You can’t open your current photo library using this version of iPhoto".
1. Tried to rebuild library as per this thread https://discussions.apple.com/message/8429269#8429269. I get the list of checkboxes, but when I hit "okay" I get the same "you can't open your current photo library ..." message again.
2. Ran software update - no sign that iPhoto is out of date.
3. Copied new version of iPhoto from brand new MBAir to MBPro, replacing older version . Got same "you can't open your current photo library ..." message again.
4. Tried to rebuild library using new version of iPhoto - guess what - same message.
5. Downloaded free trial version of iPhoto Library Manager as suggested in the thread referenced above. The dmg loads to my desktop just fine but nothing happens when I click on it -- this has never happened before. Perhaps it is looking for iPhoto, which of course I can't get to work.
So I have been unable to access my old iPhoto library with (sob) thousands and thousands of family photos in it. I run TimeMachine on to an external hard drive every hour so I hope that if my iPhoto library is corrupted, there is a safe copy on that external drive ...
Between this hassle -- hours of time wasted -- and recent debacle of upgrading iTunes which erased my library and all of my playlists, which also took hours and hours to restore ... my 25 year devotion to Apple products is taking a major hit. I'm getting very weary of heart-pounding fear every time a new software upgrade arrives ... but that's a topic for another time. ;-)
Thank you very much indeed for all suggestions.

I'm going to start from scratch as the link you references is very, very old.
Try this: launch iPhoto with the Option key held down and try to create a new, test library and import some photos. If you are able to then the problem lies with your current library. If you get the same message then maybe the iPhoto application is the problem.
Try the following again: make a temporary, backup copy (if you don't already have a backup copy) of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If all of these fail there's one more option:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the each subfolder in the Originals folder (iPhoto 09 and earlier) or the entire Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.
OT

You can't open your current photo library using this version of iPhoto.

I tried to open iphoto this morning and recieved this message: "iphoto damaged or incomplete." There was also a white circle with a slash through the icon in both dock and applications folder. Recently I had loaded idvd from ilife since it was not included on my MBP. I reinstalled iphoto using the disc and then the following began to occur.
I received this message when I tried to launch iPhoto after reinstalling. Yesterday it was working fine. "You can’t open your current photo library using this version of iPhoto." It gave me the option of quitting but nothing else.
I followed directions on another thread to rebuild using the database by holding down command+option while launching iphoto. None of my folders came back and all the photo boxes are empty, although there are dates.
I do have a backup on an external but am not sure how I would restore using that (I've never had to in the past).
This is iphoto 11 - version 9.1. I am unsure how to check what version was installed when I purchased this MBP (Nov. 2012). I am also runnign OSX 10.8.3
Is there anyway to remove the update and recent install and revert to what I had yesterday? Or even two days ago?
Any help would be appreciated. I don't want to have to re-create my folders.
Thanks in advance!

When you installed iDVD, you must accidentally also have reinstalled and downgraded iPhoto.
This is iphoto 11 - version 9.1. I am unsure how to check what version was installed when I purchased this MBP (Nov. 2012). I am also runnign OSX 10.8.3
You have two options, either delete your current iPhoto version and reinstall iPhoto from the AppStore, or go to the -menu and run Software update to upgrade your current iPhoto version to iPhoto 9.4.3, the current version.
To reinstall: See this document http://support.apple.com/kb/ht4718
Scroll down to the paragraph: Restoring iLife applications after Internet Restore of OS X Lion or OS X Mountain Lion
It explains how to reinstall the bundled iLife applications, that came preinstalled, from the AppStore.
Regards
Léonie

After installing ilife '11 when i opened iPhoto its display a message"You can't open your current photo library using this version of iPhoto, what can i do sir??

i buy apple mac book on 12.04.2012, mac osx 10.7.2, 500gb hdd,4gb ram, i installed ilife '11 in it, after installing ilife '11 when i opened iPhoto its display a message"You can’t open your current photo library using this version of iPhoto,You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library? but option coming only quit, when i check for software update it shows ur software is up to date, waht can i do sir, how can i use my iphoto???

Make sure you are updated to the latest version - 9.2.1
LN

Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic

Open your publication at a specific article

Similar Messages

Maybe you are looking for