Opencard.core.terminal.CardTerminalException: no response from smartcard

I am using GemPlus GemPC410 cardreader and JCOP 3.0 java card. The applet has been installed on the card but when you try to send any APDU it throws the above error "opencard.core.terminal.CardTerminalException: no response from smartcard".
The complete stack trace of the error is as below
opencard.core.terminal.CardTerminalException: no response from smartcard at com.gemplus.opencard.terminal.GemplusSerialCardTerminal.internalSendAPDU(GemplusSerialCardTerminal.java:763)
     at com.gemplus.opencard.terminal.GemCoreCardTerminal.internalSendAPDU(GemCoreCardTerminal.java:349)
     at opencard.core.terminal.CardTerminal.sendAPDU(CardTerminal.java:494)
     at opencard.core.terminal.SlotChannel.sendAPDU(SlotChannel.java:115)
     at opencard.core.service.CardChannel.sendCommandAPDU(CardChannel.java:222)
     at opencard.opt.applet.ISOAppletSelector.selectApplet(ISOAppletSelector.java:134)
     at opencard.opt.applet.BasicAppletCardService.selectApplet(BasicAppletCardService.java:155)
     at opencard.opt.applet.BasicAppletCardService.sendCommandAPDU(BasicAppletCardService.java:186)
     at purse.wallet.MyCardProxy.selectApplet(MyCardProxy.java:220)
     at purse.wallet.FirstApp.cardInserted(FirstApp.java:75)
     at opencard.core.event.EventGenerator.updateCards(EventGenerator.java:233)
     at opencard.core.terminal.CardTerminalRegistry.cardInserted(CardTerminalRegistry.java:281)
     at opencard.core.terminal.CardTerminal.cardInserted(CardTerminal.java:577)
     at com.gemplus.opencard.terminal.GemplusSerialCardTerminal.poll(GemplusSerialCardTerminal.java:633)
     at opencard.core.event.EventGenerator.run(EventGenerator.java:199)
     at java.lang.Thread.run(Thread.java:595)The point where exception occurs in our code is given below : -
public boolean selectApplet()
    throws CardServiceInvalidCredentialException,
           CardServiceOperationFailedException,
           CardServiceInvalidParameterException,
           CardServiceUnexpectedResponseException,
           CardServiceException,
           CardTerminalException {
    try {
        // Set up the command APDU and send it to the card.
         System.out.println("Inside selApplet");
          allocateCardChannel();
         channel = getCardChannel();
        byte[] SelAid= { (byte)0x00, (byte)0xA4, (byte)0x04, (byte)0x00,
                  (byte)0x05,(byte)0x37, (byte)0x36, (byte)0x35,
                  (byte)0x34, (byte)0x33 };
        selectAPDU = new CommandAPDU( SelAid, 5 );
        // Send command APDU and check the response.
        //this is where the exception is thrown
        ResponseAPDU response =channel.sendCommandAPDU(channel,selectAPDU,this.getAppletID());
        System.out.println("response " + response);
        switch (response.sw() & 0xFFFF) {
            case OK :
                return true;
            default :
                throw new
                    CardServiceUnexpectedResponseException
                    ("RC=" + response.sw());
    } finally {
        releaseCardChannel();
    what could be the solution?
thanks for reading.

Hi,
This could be due to your card OS doing a self check on power up. Once the card has validated itself it will start responding. Is this a contact or contactless card you are using?
Cheers,
Shane

Similar Messages

  • NoClassDefFoundError: opencard.core.event.CTListener

    I am getting the following error:
    Exception in thread "main" java.lang.NoClassDefFoundError: opencard.core.event.CTListener
         at java.lang.J9VMInternals.verifyImpl(Native Method)
         at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
         at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
         at com.ibm.tke.smartcard.scup.IkcHostImpl.<init>(IkcHostImpl.java:13)
         at com.ibm.tke.smartcard.scup.IkcHostImpl.main(IkcHostImpl.java:19)
    Caused by: java.lang.ClassNotFoundException: opencard.core.event.CTListener
         at java.net.URLClassLoader.findClass(URLClassLoader.java:421)
         at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:269)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:643)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
         ... 5 more
    when trying to run the following program:
    package com.ibm.ccc.smartcard.tke.implementation;
    import java.util.EventListener;
    import opencard.core.event.CTListener;
    import com.ibm.jc.terminal.OCFJCTerminal;
    public class IkcHostImpl
    public IkcHostImpl() {
         new OCFJCTerminal();
    public static void main( String [] args ){
         IkcHostImpl OCFTest = new IkcHostImpl();
    This is my classpath:
    /ikc/base-core.jar;/ikc/base-opt.jar;/ikc/facade.jar;
    /ikc/framework.jar;/ikc/javacard.jar;/ikc/jc222.jar;
    /ikc/jcop2.jar;/ikc/kobil.jar;/ikc/pcsc-wrapper.jar;
    /ikc/ikc.jar
    The base-core.jar includes opencard.core.event.CTListener.
    Can anyone tell me why I am getting this error?

    Shane - Thanks for the pointers. I have successfully run the program from a command prompt. In doing so, I set up my classpath like this: -classpath /tmp/ocf-cc.jar;/tmp/jcop2.jar;/tmp. This works - I am able to do a new on OCFJCTerminal (this class is from jcop2.jar) without getting the message that the CTListener class cannot be found (this class is in the ocf-cc.jar).
    However, when I run it from Eclipse (Europa), specifying both jars (jcop2.jar, ocf-cc.jar) and the IBM Java60 library in my build path, I get the error. If I remove the Java60 library, I get other errors that one would expect to get (java.lang.* type errors). Any thoughts on running successfully in this environment?

  • Efax/HylaFAX - No Response From modem(ttyS1)

    Dear all,
       I install arch on an old laptop: ASUS Z9100 laptop (it has two systems: windows xp and Arch Linux version 3.4.9-1-ARCH). This laptop has a 56K Fax/Modem. Its detail is(lspci):
    00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
    Subsystem: ASUSTeK Computer Inc. M6800N
    Flags: bus master, medium devsel, latency 0, IRQ 17
    I/O ports at e200 [size=256]
    I/O ports at e300 [size=128]
    Capabilities: [50] Power Management version 2
    Kernel driver in use: snd_intel8x0m
        And it works in windows xp (can send and recieve fax).
        I install both efax and HylaFAX on arch, but it doesn't work. The efax response:
    [root@s2 efax-0.9a-001114]# ./efax -d /dev/ttyS1
    ./efax: Sat Aug 25 17:41:52 2012 efax v 0.9a-001114 Copyright 1999 Ed Casas
    ./efax: Sat Aug 25 17:41:52 2012 efax v 0.9a-001114 Copyright 1999 Ed Casas
    efax: 41:52 compiled Aug 25 2012 17:32:27
    efax: 41:52 opened /dev/ttyS1
    efax: 41:58 sync: dropping DTR
    efax: 42:03 sync: sending escapes
    efax: 42:08 Error: sync: modem not responding
    efax: 42:08 done, returning 4 (no response from modem)
        More information:
    [root@s2 efax-0.9a-001114]# ls /dev/
    agpgart core fw0 mapper ppp sda1 sdb1 tty0 tty17 tty25 tty33 tty41 tty5 tty58 tty9 vcs2 vcsa4
    autofs cpu hidraw0 mcelog psaux sda10 shm tty1 tty18 tty26 tty34 tty42 tty50 tty59 ttyS0 vcs3 vcsa5
    block cpu_dma_latency hidraw1 mem ptmx sda2 snapshot tty10 tty19 tty27 tty35 tty43 tty51 tty6 ttyS1 vcs4 vcsa6
    bsg disk hpet net pts sda5 snd tty11 tty2 tty28 tty36 tty44 tty52 tty60 ttyS2 vcs5 vga_arbiter
    btrfs-control dri initctl network_latency random sda6 sr0 tty12 tty20 tty29 tty37 tty45 tty53 tty61 ttyS3 vcs6 vhost-net
    bus fb0 input network_throughput rfkill sda7 stderr tty13 tty21 tty3 tty38 tty46 tty54 tty62 uinput vcsa watchdog
    cdrom fd kmsg null rtc sda8 stdin tty14 tty22 tty30 tty39 tty47 tty55 tty63 urandom vcsa1 zero
    char full log parport0 rtc0 sda9 stdout tty15 tty23 tty31 tty4 tty48 tty56 tty7 vcs vcsa2
    console fuse loop-control port sda sdb tty tty16 tty24 tty32 tty40 tty49 tty57 tty8 vcs1 vcsa3
       Any suggestions?
    Thanks!

    I haven't worked with HylaxFax in a few years, and never used Efax.  But from what I remember HylaFax was *very* particular about the modem.  Did you confirm yours is one of the supported ones ?  Back then there were really only a few that definitely worked, along with many that were only partially supported and even more that just wouldn't work.   
    I bought an older, external MultiTech Multimodem specifically for HylaFax, since it was one of the "definitely works" variey.  Even then I had to reset it frequently.  Maybe things have improved since then, and I remember doing a lot of terminal commands directly to the serial port.
    So I'd recommend confirming your modem is officially supported, then checking if there are any commands you can run to check, reset, or manually test it.

  • Socket Problem, Problem about printing the response from server

    Or even I am not sure if there is a response from server. My code is like that
                   //Connection between, httpProxy and target adress
                   Socket clientSocket= new Socket("some host", 80);
                   DataOutputStream outToServer= new DataOutputStream(clientSocket.getOutputStream());
                   BufferedReader inFromServer= new BufferedReader(new     InputStreamReader(clientSocket.getInputStream()));
                   //The first way
                   //outToServer.writeBytes("GET http://www.somehost.com/ HTTP/1.1"+ '\n');
                   //System.out.println("FROM SERVER: "+inFromServer.readLine());
                   //The second way
                   PrintWriter out_writer = new PrintWriter(outToServer, false);
                   out_writer.println("GET http://www.somehost.com/ HTTP/1.1");
                   out_writer.println("Host: localhost:80");
                   out_writer.println("Connection: Close");
                   out_writer.println();
                                        //The second way cont.
                   String s = null;
                   while ((s = inFromServer.readLine()) != null)
                   System.out.println(s);
                   inFromServer.close();There are the two ways that I tried, and both of them didn't work. Why they are not working ? How can I solve it ?

    problem is solved, the reason it doesn't work is i didn't write the parts correctly. I mean it should be exactly the same packetIf you mean that the entire request must be sent in a single IP packet, this isn't true.
    and host name must also be exactly sent to server.Of course.
    They must be like in the wireshark.No. The actual data you send must be the same, but the server has no way of telling about what the IP packet looks like or how many there were.
    One of your problems is that newlines in HTTP are defined as \r\n. In one case you're just using \n and in the other case you're using whatever the platform line terminator is. Neither is correct.

  • RDS 2012 R2: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the (name-of-service) service

    Hi guys,
    On a random base (daily, weekly) we're experiencing major log-in problems on our Windows Server 2012 R2 Remote Desktop Services farm. The VM's are hosted on Hyper-V 2008 hosts and we're not using Citrix techniques etc.
    Users are reporting that they cannot log-in, the log-in sessions hangs with a blank screen when loading their user profile (e.g. Please Wait For The User Profile Service).
    In the System event log of the server on which the user is logging on the following errors are shown:
    Source:        Service Control Manager
    Date:          23-12-2014 7:28:01
    Event ID:      7011
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    …and after 30 (or sometimes 60) seconds, the same error only another service (in random order):
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    …and after exactly 30 seconds, the same error only another service:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxmSms service.
    etcetera, with the following errors:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndPointBuilder service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
    The Portable Device Enumerator Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the TrkWks service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    These errors are logged continuously.
    An administrator cannot solve this since he isn't able to login in as well (console or remotely), only a hard reset of the VM is possible to use the affected server again.
    I took different steps to solve this problem without any success, like:
    - Installing the latest Windows updates
    - Removed unnecessary printer drivers, print monitors and print processors (no local printers/drivers are installed, only Remote Desktop Easy Printer driver is used)
    - Searched different forum posts, but found only hotfixes for Windows Server 2008 R2.
    Can someone please help me with this annoying problem?
    Many thanks!!
    EDIT:
    Of course is increasing the time-out not really an option here... http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx

    Hi Jeroentjuhh,
    1)Do you see this problem on all VM's or only on Windows 2012 R2 server?
    2)Are these VMs' in hyper-v cluster?
    3)Do you see event id 56 or 50? Please see the below link if it helps you to resolve these events.
    http://blogs.msdn.com/b/scstr/archive/2012/02/29/how-to-troubleshoot-the-terminal-server-security-layer-detected-an-error-in-the-protocol-stream-and-has-disconnected-the-client-client-ip-and-the-rdp-protocol-component-x-224-detected-an-error-in-the-protocol-stream-and-has-d.aspx
    Thanks,
    Umesh.S.K

  • No Response From Application Server - Oracle 10g

    I am Using Oracle 10g Application server.
    When running a transaction (query to the DB) sometimes it takes more than the "x" session.timeout minutes seted.
    Then 'No Response From Application Server ' error message comes out.
    I don`t want to increase the session.timeout minutes because i do want it to work in other issues. The thing is that i don`t want the session to be terminated when waiting for the response from the DB.
    How can i overcome this?
    Thanks

    Thanks for answering...
    Sorry, i`m new in this. I`m using j2EE technology.
    The thing is that i was trying to do a page that prints a loading... while waiting for the response from the DB, but when it comes the resultset, and i redirect to another servlet to print the results, an illegalStateException came out (the response has already made the commit).
    So i was thinking maybe there was a solution for the application to know that the query is being made in the DB(and that the app/session isn`t stopped).
    Maybe with another driver? now i`m trying the ojdbc14.jar.
    Or maybe in J2EE I can do a page that self reloads every "x" minutes while waiting for the response from the DB as you said and when it comes prints it ?
    Thanks a lot
    Andres

  • How do you get a RESPONSE from Verizon?

    How does one get a response from Verizon?  Here's my situation...
    Given the amount of trouble that I have had with a recent order, you would think that I was trying to land a 747 jet on my roof.  In reality, all I was aiming to do was to cancel the $19.99 per month phone service that I never used.  I do not even own a phone, for that matter.  I also had enhanced high speed Internet, and I wanted to retain the high speed Internet.  A few days before January 13, 2012, I called Verizon and spoke to the 1st sales representative, who ensured me that it was no problem to cancel the phone service and yet retain the high speed Internet for the same monthly price.  24 hours later, my high speed DSL service was no longer functioning.  I will try to briefly explain the disastrous customer service that ensued. 
    The first several phone calls to Verizon were not productive as I was transferred to the wrong department, and then at least one of my phone calls was dropped by the Verizon server.  The representative did not call me back.  I finally got in touch with a technical support representative, the 2nd Verizon representative, who informed me that the high speed Internet had been turned off and that I had to speak to a sales representative to solve the issue.  Another sales representative, the 3rd Verizon representative, informed me that the 1st representative had cancelled my phone line, and thus cancelled all of my services.  Great.  The 3rd representative informed me that he was absolutely capable of handling the problem and that he would simply add a new order for high speed Internet, which was to be activated the next morning.  The next morning came and went, and guess what?  No Internet.  I called again.  The 4th Verizon representative told me that everything that had been done previously was incorrect and that the sales department is not capable of making such changes.  She told me that she could not help me and that my claim had to be submitted to a different department, which has the authority to un-do all of the previous changes.  She told me that I would receive a call back the same day to resolve the issue.  Given my previous experiences with Verizon, I was confident that I would not, in fact, receive a call back and so I asked her how I could get transferred to this department, if I needed to call again.  She said that I could not be transferred.  Okay.  So then I asked her what to ask for so that next time I called, I could be transferred to the correct department without dealing with yet another sales representative who gives me yet a different story.  She informed me that she could not provide that information to customers.  The Department That Shall Not Be Named (and that I cannot contact) did not call me, and I was not surprised.  Unfortunately, I did not know how to go about contacting them, because, as I was told, customers aren’t allowed to do that. 
    The 6th phone call to Verizon was dropped by the Verizon server.  The 7th phone call to Verizon went to the 5th Verizon representative, a sales associate who placed us on hold for the first 15 minutes only to inform us that she could not find any record of our Internet service.  What the heck was she doing, checking her Facebook account?  She finally returns, puts us on another extended hold, and then adamantly tells us that we need to speak with technical support, which, if you recall, was the first Verizon party that I spoke at the beginning of this debacle.  The 5th  representative transfers me again to technical support.  Of course, the technical support personnel, the 6th Verizon representative said what the first one did, that the account was inactive and that we needed to talk to the sales department.  My husband was on the phone at this point because I was DONE.  When the 6th technical support representative tried to transfer him back to the sales department, my husband insisted that the 6th technical support representative remain on the line while we spoke to yet another sales representative, the 7th Verizon representative.  The 6th technical support representative patiently waited with us while we sat in yet another long queue to speak with a member of the sales department. 
    The 7th sale representative, from the retention department based out of New Jersey, found that all previous orders had been set up erroneously.  She cancelled the old orders and reinstated a completely new order.  The DSL began working a few days later.  MAGIC.  She then left me a voicemail message saying that she would eliminate the activation and shipping fee (duh) as I never canceled the account to begin with and as I already had the equipment.  She also applied a coupon to reduce the price to around $30 per month, assured for the next 2 years.  I was relieved. 
    You can imagine our frustration then when we received the bill for $79 on February 6, 2012, which included a much higher monthly rate (around $45) and the shipping and activation fee of $19.99 that we were assured we would not pay. Again, nothing was shipped to us because we already had the equipment.
    Our next phone call to Verizon landed us with a guy, the 8th Verizon representative, who had no intention of helping us.  According to him, there was no record of these wrongs, and despite the fact that we had an old account number and three order numbers that were screwed up, he did not deem that there was enough evidence to change our monthly bill.  (Unfortunately, the 7th Verizon representative did not make notes or appropriately document the situation on the new account.)  The 8th Verizon representative then had the audacity to comment that we could be lying to him, yet he was unwilling to view the evidence that we could have presented.  Instead, he suggested that we call tech support again and try to go through the same process to get connected to the mysterious “retention department” which he knew nothing about. 
    At this point, I was beyond fed up.  The attitude of the 8th Verizon representative put me over the edge.  I filed a complaint with the Better Business Bureau (BBB) with an abbreviated version of this story.  I did not file the complaint to get back at Verizon.  Instead, I filed the complaint because I knew that another phone call to Verizon would be useless.  I’ve been dealing with this issue for over a month, and I’m sick of it.  I have better things to do with my time, believe it or not, and this situation has resulted in a significantly waste of my time over what, in my opinion, was a very simple issue to resolve. 
    The BBB processed the complaint and I was contacted last Friday afternoon by a Verizon representative (the 9th) who said that she was looking into the matter and that she would respond to me within two to three business days.  Well, it’s almost the end of the week, and I have received no response.  Again, after all of this, how could I be surprised? 
    I have been a Verizon customer, wireless and residential, for as long as I can remember, but I am reaching the point of outrage.  This situation is truly unacceptable. 
    You would think that, in 2012, with all of the technology available to us and the fact that Verizon is a COMMUNICATIONS COMPANY, that at least Verizon employees would be able to make a basic change to an existing order and that at least one out of 9 Verizon representatives would be able to solve this issue in a span of over four weeks.  Think again. 
    How does one get a response from Verizon? 

    dougiedc wrote:
    It boggles the mind.  The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account.  They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes?  Is this a vendor store or is it really a Verizon owned and operated store?"  The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
    Yes, it indeed boggles the mind.  I'm of course referring to the fact that your post concerns Verizon Wireless products and services.  This forum is dedicated exclusively to Verizon Communications services.   As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
    If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums.  You can reach them by clicking on "Wireless" (either here or at the top of the page).
    Good luck and I sincerely hope you get your issue resolved.

  • Acrobat 9: compiling responses from multiple questionnaire responses into spreadsheet

    I want to send out a questionnaire to 150+ individuals, then compile responses from all parties into one spreadsheet. The form uses drop down options and text fields.

    You can compile the data from multiple PDF forms into a single spreadsheet in Acrobat, if that's what you're asking. I can't say for sure where that command is in Acrobat 9, but it should be somewhere under Document or Advanced...

  • Unable to get the response from dynamic partnerlink

    Hi
    I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
    <binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
    <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="onResult">
    <soap:operation soapAction="onResult" style="document"/>
    <input>
    <soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
    <soap:body use="literal"/>
    </input>
    </operation>
    </binding>
    <service name="LoanServiceCallbackService">
    <port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
    <soap:address location="http://openuri.org"/>
    </port>
    </service>
    please help me on this
    thanks
    Srikanth

    Hi, thanks for the input
    Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
    With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

  • Issue with receiving response from web application

    Hi,
    I have configured B2B with business protocol as 'Custom document document over Internet', document exchange protocol as AS2-1.1 and transport protocol HTTPS1.1 to invoke a web application deployed in Oracle Application server. B2B is able to invoke the web application with HTTPS request which contains an xml.
    I have set the acknowledgment mode as 'Sync' and 'Is acknowledgement handled by B2B' as true. But while receiving the response from web application which is an xml, B2B is showing the error as
    Description: Unable to identify the document protocol of the message
    StackTrace:
    Error -: AIP-50083: Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3244)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1665)
         at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2382)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1825)
         at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:974)
         at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
         at java.lang.Thread.run(Thread.java:534)
    I have added headers as present in the wire message of the request. In B2B, it is showing the wire message for response as follows.
    TO_PARTY=XXX
    AS2-To=XXX
    DOCTYPE_NAME=TestAS2DT
    DOCTYPE_REVISION=1.0
    Date=Tue, 03 Nov 2009 06:09:22 GMT
    AS2-Version=1.1
    AS2-From=YYY
    Content-Transfer-Encoding=binary
    [email protected]
    ACTION_NAME=TestAS2_BA
    Content-Type=application/xml
    Server=Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
    MIME-version=1.0
    User-Agent=AS2 Server
    FROM_PARTY=YYY
    Content-Disposition=attachment; filename=1.0
    Connection=Keep-Alive
    From=YYY
    Keep-Alive=timeout=15, max=100
    <?xml version="1.0" encoding="UTF-8"?>
    <Books>
    <Book>
    <BookTitle>Ajax Hacks</BookTitle>
    <Author>Bruce W. Perry</Author>
    <PubDate>March 2006</PubDate>
    </Book>
    </Books>
    I am able to see the xml sent as response from web application in Payload as follows.
    <?xml version="1.0" encoding="UTF-8"?>
    <Books>
    <Book>
    <BookTitle>Ajax Hacks</BookTitle>
    <Author>Bruce W. Perry</Author>
    <PubDate>March 2006</PubDate>
    </Book>
    </Books>
    I am able to see the HTTP response in b2b_dc_transport.log. In transport log it is not showing any error. Please help me to fix this issue.

    Hi,
    Request and Response should be part of same agreement. I hope you are not confused between Acknowledgement and Response. Acknowledgement can be received in the same session (sync mode) but Response will always come in a different session and will be treated as a different document. If, for request, party A is initiator and B is responder then for response party B will be initiator and party A will be responder (as Requset and Response are two docs in case of Custom Document)
    For configuring X-Path, please refer section 8.3.11 Configuring the XPath Expression for a Custom XML Document at below link -
    http://download.oracle.com/docs/cd/B14099_19/integrate.1012/b19370/busact_coll.htm#sthref784
    Please let us know whether you are trying to receive a response or Ack?
    Regards,
    Anuj

  • Discoverer Portlet Provider, No Response from Application Web Server

    I must have some odd configurable incorrect. I hope one of you can help me out and point me in the right direction.
    My issue involves the "Discoverer List of Worksheets" portlet. It will display all the workbooks and I can drill in and see the worksheets, but, when I click/choose a worksheet, it will return within a couple seconds and display "No Response from Application Web Server" in bold red letters, then "There was no response from application ...", then "Please notify the site's webmaster ...". I have spent the day trying to lock down a log on the http server, j2ee, web cache and used enterprise manager to see logs which changed immediately after the error but didn't seem to find much.
    What am I missing? Is there a timeout somewhere? Does it look like I missed something when I configured anything?
    Below are the configurables and answers to some of the obvious questions.
    Thanks,
    BC
    Windows 2003 sp1
    App Server 10.1.2.2.0
    Discoverer 10.1.2.54.25
    ssl -> no
    sso -> yes
    provider registration:
    http ://luke.xxx.com/discoverer/portletprovider (actual does not have a space after "http")
    "cookie domain" not checked
    "user has the same identity ..."
    user/session --> "once per user session"
    from web cache log:
    10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
    ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
    ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKC ... 4hUQ%3D%3D HTTP/1.1" 302 1909 "6959909483946,0"
    10.2.2.226 - - [18/Jul/2007:18:17:37 -0700] "GET /osso_login_success?urlc=v1.4~534 ... 774851DD HTTP/1.1" 503 40
    2 "6959909483946,0"
    from middle tier http server log:
    10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
    ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
    ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKCk ... a4hUQ%3D%3D HTTP/1.1" 302 1921
    from infrastructure http server log:
    10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~BFE8 ... HTTP/1.1" 302 4998
    url being passed from provider:
    http ://luke.xxx.com/discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_samewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F1048&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NAME_241292&vw_partitionid=241292&&vw_return_url=eNr ... 1z9AEA6Dsegw%3D%3D
    url that returns:
    http ://luke.xxx.com/osso_login_success?urlc=v1.4~0C549F ... 3E94
    the rest should be obvious:
    Processes in Instance: rc_luke_mt1_instance.luke.xxx.com
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | 5352 | Alive
    OC4J | home | 2764 | Alive
    OC4J | OC4J_Portal | 2452 | Alive
    OC4J | OC4J_BI_Forms | 3644 | Alive
    WebCache | WebCache | 5372 | Alive
    WebCache | WebCacheAdmin | 2608 | Alive
    HTTP_Server | HTTP_Server | 5204 | Alive
    Discoverer | ServicesStatus | 5860 | Alive
    Discoverer | PreferenceServer | 5580 | Alive
    wireless | performance_server | 5216 | Alive
    wireless | messaging_server | 4872 | Alive
    wireless | OC4J_Wireless | 6116 | Alive
    DSA | DSA | N/A | Down
    Processes in Instance: rc_luke_infra1_instance.luke.xxx.com
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | 2768 | Alive
    OC4J | oca | 2312 | Alive
    OC4J | OC4J_SECURITY | 5348 | Alive
    HTTP_Server | HTTP_Server | 3036 | Alive
    DSA | DSA | N/A | Down
    OID | OID | 2492 | Alive
    Congratulations! You have successfully reached your Provider's Test Page.
    Recognizing Portlets...
    default_gauges_portlet_name
    default_worksheet_portlet_name
    default_list_of_worksheets_portlet_name
    Recognizing initialization parameters...
    oracle.portal.log.LogLevel : 7
    Recognizing component versions...
    ptlshare.jar version: 10.1.2.0.2
    pdkjava.jar version: 10.1.2.0.0

    hi,
    i also got the same error on my IE when i want to run VPE Workbench 5.6
    the error :
    No Response from Application Web Server
    There was no response from the application web server for the page you requested.
    Please notify the site's webmaster and try your request again later.
    The error came up after i update the windows server (restart server), before that everything is running fine and ok.
    I dont know where the problem is. Is it because the update? or Application Server?
    I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

  • No Response from Application Web Server - j2ee when running a long report

    Using Oracle Application server, 10.1.2 and a j2ee application which uses Oracle Reports to create pdf report output.
    When a report takes 5 mins or more to be produced, the following error message occurs, ending the session. The report request however does continue to run, and the pdf is eventually
    produced on the server, but the user cannot retrieve it. So I know the report server is still going after getting this error:
    No Response from Application Web Server
    There was no response from the application web server for the page you requested.
    Please notify the site's webmaster and try your request again later.
    I'm assuming this is a timeout setting in a configuration file, but where?
    Thx,
    Tim

    Hi Tim,
    Take Backup of httpd.conf from Oracle_home2(midtier)
    Now Edit httpd.conf, set timeout 1200 ie 20 mins (this depends on you how much time u need to set Note: Values are in seconds)
    Now restart entire Mid tier
    Then run the report again.
    Regards
    Fabian

  • Firefox freezes about five seconds after I open it, and whenever I use Ctrl+alt+delete to close it I get told that it is waiting for a response from me.

    I am having a problem with Firefox. Whenever I open it, it runs fine for about five seconds and then freezes. A small white rectangle appears in the upper left corner of the browser window. The screen still scrolls fine, but whenever I try clicking on anything (including the menus in the toolbar), it just gives me an unresponsive 'ding' sound. When I try closing the programme with Ctrl+alt+delete, I get a message saying 'The system cannot end this programme as it is waiting for a response from you'. I originally had this problem with an earlier version of Firefox and tried installing Firefox 4 to see if this helped. It worked for two days and began doing it again. I have already tried un- and re-installing Firefox and restarting my computer, and Firefox will not run properly for long enough to let me disable any add-ons or plug-ins. What can I do to fix this?
    I've added a couple of screencaps of the problem. (or tried to)
    [http://i53.tinypic.com/161hvh2.jpg The white rectangle]
    [http://i51.tinypic.com/dwsq1.png Error message]

    Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

  • One socket and two ports, not getting response from the server

    Hi everyone,
    I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.
    Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port. My problem is that i can't create another socket using this port and therefore not getting the response from the device.
    Can you people tell me how to handle such socket communication in java ?
    Thanks in advance.

    I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.Are you sure? That's not usual. It would be usual for it to use the same port for listening, reading, and writing.
    Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port.I would try just reading from the same socket you are sending on. I suggest you have misunderstood how the device works.

  • Server 2012 R2 - No response from the UmRdpService service and more...

    Hi!
    We have a Remote Desktop Services Deployment with the following:
    LIC01 – Windows 2012 R2 - Licensing
    RDCB01 – Windows 2012 – Connection Broker
    RDWA02 – Windows 2012 R2 – Web Access
    RDG01 – Windows 2012 R2 - Gateway
    RDG02 – Windows 2012 R2 - Gateway
    RDG03 – Windows 2012 R2 – Gateway
    RDSH01 – Windows 2012 R2 - Session Host
    RDSH02 – Windows 2012 - Session Host
    RDSH03 – Windows 2012 R2 - Session Host
    RDSH04 – Windows 2012 R2 - Session Host
    RDSH05 – Windows 2012 R2 - Session Host
    RDSH06 – Windows 2012 R2 - Session Host
    RDSH07 – Windows 2012 R2 - Session Host
    RDSH08 – Windows 2012 R2 - Session Host
    RDSH09 – Windows 2012 R2 - Session Host
    RDSH10 – Windows 2012 R2 - Session Host
    We have two Session Collections:
    Office-R2 (All Server 2012 R2 RDSHs)
    "Office (RDSH02, Closed for users)"
    User Profile Disk are enabled to a SOFS Share (Server 2012).
    Client Settings: Everything except "Plug and play Devices" are enabled
    Problem:
    Suddenly, one or more of RDSH
    servers (in the Office-R2 Collection) get the following error:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    After this, we get similar error messages
    to other services, such as:
    AudioEndpointBuilder, NcbService, ScDeviceEnum, WPDBusEnum, Netman
    Users logged into the server, looses Redirection
    services as local drives and local
    printers, and they also have problem signing out of the server. (Hangs on signing out)
    New Users that tries to sign in to that server are also having trouble (Hangs on signing in).
    After using the logoff tool to sign out every user on that server, I end up With the following:
    It
    appears that there are no users logged on,
    yet there are many Disconnected sessions...
    Looking at the SOFS file share I still see that RDSH04 has read/Write to the .VHDX file that hold the User Profile.. And If the user try to log on to another server in that Collection, it get a temporary profile.
    If I kill the Conncetion to the VHDX files, Users can then sign in normally to another node it that Collection.
    Trying to restart the server With "Shutdown -r -t 0 -f" does not work, It just hangs on Shutdown (waited 3 days), so All I can do is Press and Hold.We
    have also seen BSoD on these nodes, but I'm sure if they are related to this error:
    WinDBG is saying:
    BugCheck 3B, {c0000005, fffff803538fa84e, ffffd0002711cb00, 0}
    Probably caused by : dfsc.sys ( dfsc!DfscCacheStore+6f )
    I found https://support.microsoft.com/kb/2925981 and
    http://support.microsoft.com/kb/2525246, but they are not for Windows Server 2012 R2.
    Any Idea?
    Thanks
    Anders

    Hi,
    Firstly, dfsc.sys indicates the DFS clients. It means that your systems use DFS service to access the file share.
    Please let us know if you configured the DFS service on your file server.
    Also, what is the format of file path you configured for UPD?
    \\FileServer\FileShare
    Or
    \\Domain.com\DFS NameSpace\File Share
    Thanks.
    Jeremy Wu
    TechNet Community Support

Maybe you are looking for

  • UNDO tablespace corrupted

    Hi! I have been having problems for the past couple days with restarting my database. For some reason when I shutdown, once I start it up again the undo tablespaces is offline and needs to be recovered. When the application tries to connect to the da

  • How to Open Adobe *pdf Files Hyperlink in New Tab

    (Amongst all the extensions I have installed are Session Manager and Tabs Mix Plus, either of which might have bearing on this question. Session Manager is set to restore the tabs still open upon closing the previous session.) When Firefox is closed,

  • Oralce Applications Adapters in OBPM 11g doesn't work....

    with EBS 11i adapter, to create a new supplier, use the same configuration of deployment , datasource, oracleAppsAdapter & server, bpel works well, but bpm doesn't work, and no exception, return is null too. anyone know why? thank you.

  • Query Manager Condition Problem

    Dear expert, In B1 query manager, i found a report called 'Production Order Report' and there is a searching condition which i don't understand. Code: T3.CardName= '[%9]' or '[%9]' = '' If user dose not input this parameter, how the query manager  ha

  • How to set alarm for same date every month??

    Is there a way (or an app) that will allow me to set an alarm for the 29th of every month?