OpenCL - used (if yes, where) or not?!

Hi,
as you know FCX needs OpenCL GPU to run.
But i looked "into" Compressor + FinalCutX, by looking what Frameworks they use (load) and also let an OpenGL/OpenCL debugger look after OpenCL.
Also checked GPU load when doing FCP tasks - gpu was NOT more in load as with FCP!!
It seems that OpenCl isnt used - at least not in Compressor.
Would be helpful if some advanced FCX user may tell, in which funktions OpenCL (GPU computes) runs.
I can tell that FCX uses Coreimage (as FCP) and CoreVideo.
Maybe Apple disabled OpenCL usage because OpenCL (at least for ATI GPUs, AMd is working hard to get OpenCL drivers same stage as Nvidia) is buggy , and will aktivate that later with 10.6.8 or Lion ?

Lion brings the full OpenGL 3 specs to the table, this is the only thing that is known. Therfore newer gpu drivers have to bei in Lion.
In 10.6.6 and 10.6.7 the ATI kexts were renewed to support the newest Radeon HDxxx series. So in 10.6.8 it is to expected to bring again some newer drivers and maybe an OpenGL framework to support the Kexts features.
But the real "revolution" is Lion for the GPU underpinnings softwareside ( and possibly also OpenCL as that goes hand in hand now even on non-Mac Platforms, for instance the latest ATI drivers for Windows activate also OpenCL). Lion is also said to include a revised Audio/Video Platform for QT X tasks. As Final Cut X outputs via QT X would naturally think of better perfomance, yes.
However all this does not fix the isssue that FC X is only suitable for Hobbyists. It is a nice product. But not more.

Similar Messages

When I send a text message from my iPhone response only comes back to my iPhone . If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes. Responses are not coming to both anymore! Please help?

When I send a text message from my iPhone response only comes back to my iPhone . If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes. Responses are not coming to both anymore!

On both devices when you go to settings>messages>send and recieve how are poeple contacting you on each device?. e.g. email or mobile number.

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

: Could not create connection; - nested throwable: (java.sql.SQLException: Access denied for user 'adobe'@'localhost' (using password: YES))

hi all can anyone help me i am geting Exception while starting LCES server
: Could not create connection; - nested throwable: (java.sql.SQLException: Access denied for user 'adobe'@'localhost' (using password: YES))

hi all can anyone help me i am geting Exception while starting LCES server
: Could not create connection; - nested throwable: (java.sql.SQLException: Access denied for user 'adobe'@'localhost' (using password: YES))

Is it impossible to use track editor within iphone version of GB? If yes, where is the button?

Is it impossible to use track editor within iphone version of GB? If yes, where is the button?

Thanks for the information provided.
I am using 9i JDeveloper with OA extension, i.e., 11.5.10 CU2 JDeveloper from Patch 4573517 (Oracle9i JDeveloper with OA Extension for 11.5.10 CU2)
I have gone through the developer's guide. Though Developer's guide talks about "Building an OA Framework application (basics)" in chapter 3, the file naming standards hint that such kind of an application can go ONLY as an extension to the existing application.
Chapter 9 talks about extending and deploying OA FWK applications which are purely extensions. These extensions might typically have a custom EO, VO and at the max. a custom CO too. And for deploying this custom code, documentation talks about substituting the standard BC4J objects with that of the custom ones. This is OK as long as we need modifications to an existing page.
BUT, what I am looking forward is "whether it's possible to develop a new application altogether, e.g. an online book store using OA framework and integrate it with Oracle E-Business suite.". If so, how can such a new application be deployed without losing the flexibility on future upgrades?

Notes: Sync=Yes; where do these appear on my Mac?

Notes: iTunes Sync=Yes; where do these appear on my Mac? Can I read them from iTunes? The manual said something about the Mail app on Mac but I don't see any notes there (on the Mac).

There is no separate Notes App in OS X. Notes sync to your Mail App. On the left sidebar, click on the "Reminders" chevron to expand it, your notes should appear there.

I have lost my iPad 3 (3G). I do not use iCloud and I do not have the 'Find my iPad' app installed. What can I do to find it? Is there another way to bring up a map of where it is?

Although I have Telstra 3G
I do not use iCloud and I do not have the 'Find my iPad' app installed. What can I do to find it? Is there another way to bring up a map of where it is?
I dont know the opperating system but I only got it recently...
I also have a mac book pro also without iCloud.

Without Find My iPad having been enabled on it then there isn't any way to locate it - and that would only work if it's connected to a network and hasn't been wiped or had Find My iPad disabled on it.
If you think that it was stolen then you should report it to the police. You should also contact your carrier and change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Hi, I have elements 12, and my paint bucket wants to just use gray. I can not find where to reset t

Hi, I have elements 12, and my paint bucket wants to just use gray. I can not find where to reset the tools. Help! Thanks!

Check under Image> Mode that RGB Color is selected.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

mi Iphone 4s is unlocked to use in Chine where i boght it but i can not use in England. All companies sed me that it is locked. How can i use whith a sim card of UK?

You cannot use a UK carrier sim in Chile unless you are a UK customer and have roaming set up with the UK carrier and the Chinease carriers do not offer unlocking so I doubt the iphone is unlocked

Can I install Linux for Windows on my Apple Mac and afterwards use old windows programs as PageMaker on my new Mac. If yes where can I find Linus windows for Mac

Can I install Linux for Windows at my new Mac and afterwards use old Windows programs as Photo Shop and PageMaker on my Mac? If yes where at the Internet can I find Linux for Mac and Windows?

What is your definition of a "Linux for Windows" ?
There is Linux like Ubuntu which can be installed on a Mac
See the UbuntuForuns here https://wiki.ubuntu.com/MactelSupportTeam
And there is Microsoft Windows which can be installed and used on a Mac with Apples BootCamp http://www.apple.com/support/bootcamp/ or through Virtualization apps like Parallels, VMWare Fusion or VirtualBox.
Windows Programs don't run in a Linux only in Windows.
Stefan

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Error while using REMAP_TABLE and WHERE clause together in IMPDP

I am trying to move some records from a very large table to another small table.
I am facing trouble while using REMAP_TABLE and WHERE clause together in IMPDP.
Problem is data filter is not getting applied and all records are getting imported.
here is how I have simulated this. please advice.
CREATE TABLE TSHARRHB.TMP1
A NUMBER,
B NUMBER
begin
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (1, 1);
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (2, 2);
COMMIT;
end;
expdp system/password TABLES=tsharrhb.TMP1 DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp REUSE_DUMPFILES=YES LOGFILE=EXP.log PARALLEL=8
impdp system/password DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY='TSHARRHB.TMP1:"WHERE TMP1.A = 2"' REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Import: Release 11.2.0.1.0 - Production on Fri Dec 13 05:13:30 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/********@GRD6.RBSG DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=SSD_93_TABLES_FULL_EXP.log PARALLEL=8 QUERY=TSHARRHB.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "TSHARRHB"."TMP3"                           5.421 KB       2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at 05:13:33
here I am expecting only 1 record to get imported but both the records are getting imported. please advice.

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?

I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes... "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play. How can I get this message to STOP?

Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.

OpenCL - used (if yes, where) or not?!

Similar Messages

Maybe you are looking for