OpenComm Error on Satellite M35-S359

I get OpenComm Error when I try to query the modem. The error number is 000005aa. The message box states that there is probably a conflict with some other device. I have checked for conflicts and there is none. I have also reinstalled the device and updated the drivers. None of these actions have resolved the problem.
Any suggestions what I should try

Hi
Maybe this article can help you. Check it.
http://support.microsoft.com/kb/q168222/
Bye

Similar Messages

  • Satellite M35-S456: TouchEd Error - Retrieval of 'Thotkey' failed

    My 2004 Satellite M35-S456 laptop gets an error when starting up.
    Titled "TouchEd Error," it says:
    "Retrieval of 'Thotkey' failed. Error code - 0x00031402, 0x00000002."
    I can use my touchpad, but I can't use the Fn button nor Play/Stop/Forward/Rewind buttons on the front edge of the laptop.
    What should I do? I've already tried installing the driver for the touchpad again, but it doesnt' work. I did a Norton Antivirus sweep and nothing comes up. I took out hte battery and put it back in. Nothing has worked.
    Thanks,
    C. Andres Lopez
    Chicago, Il, USA

    Hi
    Possibly some registry entries are damage or something different.
    In such case its not easy to find a right solution. I think you could use the system restore too to roll back the OS to the early point or you will install the OS again.
    Please note: if you will install the Windows from original MS CD you need all Toshiba drivers. The Toshiba drivers must be installed in the right order.
    Very important is the installation of the chipset driver and common modules at the beginning.
    This is all what I can suggest.

  • M35-S359 - need WXP Pro Recovery CD (or Drivers)?

    Does anyone have M35-S359 XP PRO (Service Pack 2) Recovery CD or drivers that I get? I have the Home Edition CD but it doesn't help with my screen brightness.
    I'm mainly interested in getting the Function Keys to work to make the screen brighter. All other drivers I was able to download and install successfully. BUT I'm having issue finding the Function Key drivers. I've tried Power Saver install and Hotkey install. The Power Saver fails to install and the Hotkey install didn't help.
    Any idea? Thank you in advance.
    Message was edited by: milucky

    Hello
    As far as I know all drivers, tools and utilities can be used with WXP Home and Pro. There is no difference. If you have installed Pro version from Microsoft full version CD you must install all Toshiba stuff alone. Your unit must be an US model and all you need you can find on Toshiba US download page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  • Error: starting satellite services

    Hi all,
    When I install Ops Center on Linux CentOS 5.10 for management Sun Oracle Server. I have issue with last step of installation script ". I have error messsage below :
                                                   Ops Center Enterprise Controller Installer
                                                         (version 11.1.0.1536 on Linux)
    1. Check for installation prerequisites.                                                                                    [Completed]
    2. Check that required RPM packages are present.                                                                            [Completed]
    3. Configure file systems.                                                                                                  [Completed]
    4. Install Agent components.                                                                                                [Completed]
    5. Create Deployable Proxy Bundles.                                                                                         [Completed]
    6. Add users.                                                                                                               [Completed]
    7. Install prerequisite packages.                                                                                           [Completed]
    8. Install application packages.                                                                                            [Completed]
    9. Run postinstall tasks.                                                                                                   [Completed]
    10. Install IPMI tool.                                                                                                       [Completed]
    11. Initialize database.                                                                                                     [Completed]
    12. Install Service container components.                                                                                    [Completed]
    13. Install Core Channel components.                                                                                         [Completed]
    14. Install Proxy Core components.                                                                                           [Completed]
    15. Install Enterprise Controller components.                                                                                [Completed]
    16. Install Update Connection - Enterprise.                                                                                  [Completed]
    17. Install Ops Center BUI components.                                                                                       [Completed]
    18. Install OS provisioning components.                                                                                      [Completed]
    19. Initialize and start services.                                                                                       [Not Completed]
    Failed Step:  Initialize and start services.
    The following is a portion of the installer
    log which may indicate the cause of the error.
    If this does not indicate the cause of the
    error, you will need to view the full log
    file. More information on how to do that is
    available below.
    INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/satellite-ajaxterm-svc.xml)
    INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/proxy-base-svc.xml)
    INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/satellite-xvmoc-svc.xml)
    INFO: Converting satellite SMF manifest file (/opt/sun/xvmoc/lib/svc/proxy-xvmoc-svc.xml)
    INFO: starting new satellite SMF services
    Can't exec "/opt/sun/xvmoc/bin/satadm": No such file or directory at /root/xvmoc_full_bundle/Linux_i686/Product//installer/Modules/util.pm line 1619.
    Use of uninitialized value in concatenation (.) or string at /root/xvmoc_full_bundle/Linux_i686/Product//installer/Modules/util.pm line 1631.
    Error: starting satellite services
    Command: /opt/sun/xvmoc/bin/satadm start -v -w
    Exit code: 72057594037927935
    Signal: 255
    Output:
    Please fix the problem and then try this step again.
    For a full log of the failed install see the file: /var/tmp/installer.log.21123.
    t. Try this step again (correct the failure before proceeding)
    x. Exit
    Enter selection: (t/x)
    How do I fix this issue, thanks for any help!
    Regards,.

    Hi
    Go to deploy service in visual administrator and start your application.
    instance--serverservices--
    deploy.
    Or
    In visual administrator
    instance--serverservices--
    web service container and start the application.
    Reward points if useful

  • What is acceptable Satellite M35 Motherboard CMOS battery Voltage range?

    Re: What is a good Toshiba Satellite M35 CMOS battery Voltage range?
    Part Number: P71035016113
    I pulled this part out of my Toshiba and its reading 2.75 Volts.
    Is that the proper voltage?
    If not, is it in an acceptable range to keep and not have to replace?

    Contact direct www.toshiba.com cusatomer service,for specific response to alleviate the concern.

  • Satellite M35: Configfree search for wireless devices

    I have a satellite M35. The icon for search for wireless devices in configfree stopped appearing in my desktop.

    Hi Enrique,
    you could look up if the Configfree software is already installed on your unit. You can then create a new shortcut on the desktop by right clicking the "cfmain.exe" program. It should works now!!
    or
    you deinstall the software and re-install it from your Toshiba Tools and Utilities CD. If you do not have the CD, you can download the newest Version from Toshiba Amerika
    at http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    (I think the Satellite M35 is an US product)then do a reinstall of the software.
    I hope this will help you.
    cu Sammy23

  • M35-S359 Wrong Machine Type error message

    Well I will try this again!
    HDD replaced
    Attempted System Restore
    Failure - Error message "Wrong Machine type"
    Restore Disk is Valid. I have used it before to restore the Original Drive.
    Attempted to run Ghost from the Restore Disk. HDD took the Restore but will NOT boot from it.
    I have taken all the proper steps in setting up the Laptop.
    Others POSTed for this Model Laptop have had the same issue
    Im not going to send it in to an ASP.
    I am Toshiba Certified but this one has been a real Pain in the Bottomside.
    Im about ready to do what one of my former Customers did to his Laptop out of frustration.
    He smashed it until nothing was left.
    It seems to me Toshiba want us to sell and support their products but we are not getting the support that we need!
                                    Steve Toquinto
                                    [email protected]

    I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
    I don't think anyone has found a definitive answer.
    thanks

  • Satellite M35 - Brightness Not working with WXP SP2

    After formatting and installing XP SP2, Brighness function keys do not work. Can anyone please point me to what type of drivers I need to download to get the Brightness working? I tried to install Power Saver from Toshiba site BUT I get error messages. Nto sure if this driver is for Service Pack 2 of XP.
    Any assistance you can give in getting the M35 Satellite Brightness working with XP Service Pack 2 would be appreciate.
    Thank you in advance.

    Hello
    Try please to install Toshiba Hotkey Utility for Display Devices for Windows XP. I dont know if just this utility is responsible for that but fact is that you should install all Toshiba specific stuff and combination of those tools result with full functionality.
    If you dont have Tools & Utilities CD please check Toshiba US download page and there you will find everything you need.

  • IDE #1 Error on Satellite Pro A10

    Hi, My Satellite Pro A10 laptop displays IDE #1 Error everytime I attempt to put it on. That message is all I get, although it is displayed for a short time- the laptop always comes back to that message, it attempts to load the screen just go's blanbk and then that message comes up everytime! I was wondering if anyone could explain what this means and how do i fix it?
    thank you
    david

    Hi
    This is very strange that this error message appears and you have not changed the drive.
    Did you try to 'flash' the drive or to install any firmware or update the BIOS?
    I ask it because I can't believe that this error message appears without any reasons.
    Like Jack and Silas say, this error appears because of no compatibility of the drive.
    The unit was delivered with compatible drive and should works. I assume the BIOS cannot recognize the drive at this time because it's dead.
    In my opinion you have to replace the drive. (try to check it it's possibel to install/to boot Toshiba recovery CD)
    Ps: Just for info: I have read in the net that sometimes it's possible to flash the drive with any illegal software to change the master/slave settings but this is not advisable. But I have never tried it.
    I have also read in the forum that if this error message appears every time and it's not possible to use the drive and the BIOS cannot recognize this device so the connection of pin 45 and 47 could solve this issue sometimes.
    Check this topics:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5457&messageID=18649
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=7005&messageID=24482

  • Windows update 80072efd error on Satellite A200

    Hello
    Windows update doesnt work on my Satellite A200. When I try to search for new updates, after about 10 minutes appears error 80072efd. Of course Ive made all suggested solutions, but no results. Operating System is Vista Home Premium and there is Norton Internet Security installed as a firewall.
    Ive tried to start windows update, when Norton firewall was turned off, but the result was the same error 80072efd.
    Does everyone know what can I do more?
    Regards
    Piter

    I see this problem quite regularly at work when trying to do the 1st update of a new installation of XP (is this your O/S)
    The problem seems to be the update of the update service if that makes sense. What I have found is that if I manually install the necessary updates then the next stage works.
    Download (www.microsoft.com/downloads and search for them) KB893803 and KB842773 and install them, you may get a message that one of them is already applied. These are two of the three files downloaded when you initially try to update a new build. The third does not matter but I normally find this then fixes the error.
    Also go through the regional and keyboard settings carefully and make sure they all match, I had this once where the time zone did not agree with the localisation option. Kerberos security will not allow connections if the PC clock is wrong to the server and if you are in the wrong time zone then it see this as the clock being wrong.

  • Memory errors at Satellite P105-s6177

    Hello all
    I have Toshiba Satellite P105-s6177. It's been exhibiting classic symptoms of memory problems for months - I get random bsod's with reasons like MEMORY_MANAGEMENT, BAD_POOL_HEADER and a few others I can't quite recall, mostly something about a page fault in an unpaged area. it's been through multiple reformats to no avail. I ran the windows memory test and it said I had a RAM error within seconds of starting.
    Recently I tried to reformat it from the backup discs that Toshiba provided with the computer, and the computer got a BSOD in the middle of the reformatting process. I've since tried a few more times, and get what Google tells me is a RAM error. I took out one piece of RAM, tried it, replaced the RAM and took out the other piece, tried it, and keep getting memory errors. I apologize as i don't recall the name of the specific error I keep getting, I will try to provide it as soon as possible.
    Basically, i've narrowed it down to either both pieces of RAM being corrupted or a virus in the BIOS simulating a RAM error. Is there any way I can test for a virus in the BIOS? Currently I can't even get the computer to boot, it has no operating system installed on it due to the reformatting fiasco. The most I can do is bring up a command prompt.
    Thanks for your time and attention.

    Hi
    > I ran the windows memory test and it said I had a RAM error
    As you already posted in your first message everything looks like the RAM malfunction.
    But these are only suggestions and in the forum nobody will be able to say exactly if this is really a memory issue without any detailed checks
    So you will need to buy a supported RAM and would need to test it
    Good luck

  • System recovery error in satellite A300

    Hi. Sorry for the bad english. I have a problem. In my satellite A300 Vista comes a blue screen error.
    I followed the instructions in the manual to make system recovery. At the boot press f8 and select "Repair your computer". Seems to start properly restored, but leaves an error message that says: "Could not start the program installed. Click OK to turn off the computer."
    I do not know what to do. Help me.
    Thanks, Enrico

    Thank you for the STOP 0x00000024 information, Enrico.
       Bug Check 0x24: NTFS_FILE_SYSTEM
    You may be able to resolve this by running a System Restore or Chkdsk /r from the Recovery Environment.
    At the boot press f8 and select "Repair your computer". Seems to start properly restored, but leaves an error message that says: "Could not start the program installed.
    Unfortunately, the only way to reach it now is with a Windows Vista installation DVD or by downloading a recovery disc from NeoSmart.
      Windows Vista Recovery Disc Download
    Maybe you can borrow an installation disc from a friend?
    Which Satellite A300?
    -Jerry

  • NDStray.exe - Application Error on Satellite A305-S6916

    Recently, I have begun to experience an error when I first boot my computer:
    NDStray.exe - Application Error
    The application failed to initialize properly (0xc0000006). Click OK to terminate the application
    or
    The exception unkown software exception (0xc0000005) occured in the application at location 0x0022ab4. Click OK to terminate the application.
    When I click okay, everything seems to run normally with two exceptions:
    1. My network icon shows that I am disconnected from any wireless networks, but I am able to browse the web normally.
    2. I experience a 30-45 second lag every time I launch a program and often while using any program, especially if that program uses the internet.
    I am running on a Satellite A305-S6916, model# PSAGCU-09S01S, with Windows Vista. I am fully up to date on Windows Updates. I ran a virus scan through AVG and did not find anything, a spyware/malware scan through Spybot S&D, but did not find anything. I did not originally connect the error with the lag, so I also defragged and ran the disk cleanup program, none of which have helped at all.
    I am unsure of how to resolve this error, any assistance is appreciated. Please let me know if further information is needed. Thank you

    Satellite A305-S6916
    It's the component of Config Free that supplies the icon in the Notification area. You don't need it.
    You can try reinstalling Config Free to get rid of the message.
       Config Free for Windows Vista (32/64bit)
    Or you can disable it by clearing the corresponding check box on the Startup tab of the System Configuration utility (msconfig.exe).
    -Jerry

  • Display driver error on Satellite A200-14D

    Hi,
    When i try to install on my Toshiba laptop(Satellite A200 14D with XP) a game...... i get an error message saying "Could not initialize graphics system. Make sure that your video card and driver are compatible with "DirectDraw"
    How can i get help with this problem?!
    Thank you for your help.

    Hi,
    you have several options to solve that problem.
    First, check the [Toshiba Driver Download Site|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] for the newest drivers. If they dont help, go to [Laptopvideo2Go.com|http://www.laptopvideo2go.com/] which is also really good site with vga drivers.
    Sideways you should update your [DirectX|http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en] to the latest version.
    Please give a post back if nothing helped.
    Greets

  • Error restoring satellite pro A200-ez2205X

    I tries to reload software by using the disks I made off of computer. I recieved an error stating my machine wasn't a satellite pro. I recently found directions how to reload software from my hard drive. I then recieved a screen saying Wrong Machine! Now I can not use my computer. How do I fix this or who do I need to call?

    Have you had your machine serviced recently? What you are experiencing is the data in the DMI strings do NOT match that in the repair disks/partition. Generally speaking, I've seen this when a system board has been replaced and the repair center did not reflash the system's DMI. It's not supposed to affect the system, but have you flashed a BIOS yourself recently? A repair center is likely the only way to get the DMI reflashed.
    Rick...

Maybe you are looking for