OpenDirectory Replica doesn't get updated

Hi,
I have 3 servers which both of them are replicas of the master OpenDirectory. I use services like iCal and iChat on a replica but when i create a new user on the master, the replica doesn't allow the services to this new user. I look to manually add the new user to the users allowed list of this service (iChat) but he doesn't appear in this list while he does appear in Workgroup Manager. He only appears in the service user list when a search him. So, i manually add him but i can not connect this user to iChat.
Any idea about what is the matter?
Thanks,
Tomatorz

Try running this command on the OD master:
sudo slapconfig -replicatenow
If that doesn't work, then something in your replication is broken. I would advise destroying and recreating the replica.

Similar Messages

[svn:osmf:] 10991: Fix bug FM-119, where the playhead time doesn' t get updated until after the seek has completed.

Revision: 10991
Author:   [email protected]
Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
Log Message:
Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed. The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event. This changelist also updates the unit tests and NetMocker to verify the fix.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-119
    http://bugs.adobe.com/jira/browse/FP-1705
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
    osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

Revision: 10991
Author:   [email protected]
Date:     2009-10-17 22:52:28 -0700 (Sat, 17 Oct 2009)
Log Message:
Fix bug FM-119, where the playhead time doesn't get updated until after the seek has completed. The bug is actually in Flash Player (FP-1705), and the workaround is to wait until NetStream.time gets updated before dispatching the seek completion event. This changelist also updates the unit tests and NetMocker to verify the fix.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-119
    http://bugs.adobe.com/jira/browse/FP-1705
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/traits/SeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/audio/TestAudioSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/media/TestMediaPlayer.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/net/TestNetStreamSeekableTrait.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestISeekable.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/traits/TestSeekableTrait.as
    osmf/trunk/libs/adobe/NetMocker/org/osmf/netmocker/MockNetStream.as
    osmf/trunk/libs/adobe/NetMockerTest/org/osmf/netmocker/TestMockNetStream.as

HT6058 My ipad2 doesn't get updated instead all mails are also blocked! pls hellp

My ipad2 doesn't get updated instead all mails are also blocked! pls hellp

How are you trying to update? Over the air or connected to computer?
Mails blocked? What is happening when you try to get mail?
Are you seeing any error messages? A little more info would be nice.

OVM-Manager 2.2 doesn't gets updated properly.

hi,
i have ovm 2.2 setup consist of 4 servers in cluster.
whenever any of the servers get rebooted.The guest vm gets restarted on the next available resource server.
And now in the OVM-Manager side i see all the guest tht got restarted on the next available resource server shows the status as "UNKNOWN"
OVM-Manager doesn't gets updated properly.
currently in all my vm servers i have ovs-agent version "ovs-agent-2.3-27"
please suggest....

hi Avi,
thks for your reply..
i had upgraded ovs-agent form 2.3-27 to 2.3-31.
i noticted one thing which commom for both ovs-agent version
VIP doesn’t works properly using any of the ovs-agent version (2.3-27 nor 2.3-31)
Whenever VIP is enabled it leads to two major problems.
1)Disturbs the Server Pool HA. It works initially and then start showing unusual behavior .
2)OVM-Manager doesn’t gets updated.
Hence the whole setup is disturbed.
But when only Server Pool HA is enabled & NOT VIP everything works properly .i.e. HA across the Pool & even ovm-manager gets updated time to time.
Seems there is still some bug in the ovs-agent 2.3-31 also especially for VIP.

J1iex issue : J_1IEXCDTL GR qty doesn't get updated

Hi ,
we have a process like .... Capture excise invoice , MIGO 103 , MIGO 105 and Post excise invoice.
Facing one issue wherein system is not updated GR QTY in J_1IEXCDTL table.
The step I am following are
1) Capturing excise invoice ( Say number is 100 and excise invoice internal number 45)
2) Cancelled that excise invoice
3) Re-creating exscise invoice with same number ( 100 and excise invocie internal number 46)
4) Did MIGO 103
5) Perfomred MIGO 105
6) Now cancelled MIGO 105 ,
Issue 1 : It changed the status of both excise invoices 45 and 46 (internal numbers) to "IN PROCESS"
Actually the Status of 45 should be CANCELLED and 46 should be "IN PROCESS"
Issue 2 : Generally reversal of MIGO , updates the "Qty of Goods received" in J_1IEXCDTL but in this case Qty doesn't get chaned to 0 for Excise invoice 46.
Issue 3: Because of all these issues , we are not able to cancel Excise invoce 46. System is throwing an error
" REVERSE the material document before invoice cancellation"
have u guys encountered such types of issue ...
regards
Shrey

Hi,
After canceling the GR thru MIGO, please go to J1IEX & select cancel & save it.
It will help to change the status form in process to cancel in excise books.
Hope above will help.
shyam kogta

Firefox+Flash: Some flash applets' content doesn't get updated

Hello community,
I stumbled upon a very strange problem with Firefox and Flash. Some flash applets (example: http://www.kenken.com/game) show only a plain white rectangle. For a long time I thought that it is a problem with Flashblock and/or NoScript. Today, however, I tried to get rid of the problem and made following observations:
1. The problem persists in safe mode (with deactivated extensions).
2. The problem persists after disabling hardware acceleration in the Firefox settings.
3. The problem does NOT occur in Chromium&Pepper Flash. But I'd like to stick to Firefox for many reasons.
4. The problem does NOT occur on my laptop running Manjaro (however, the setups are not really comparable).
5. Initially I thought that the flash applets aren't initialized at all, however, now I observed that if I switch to a different tab and then back to the tab with the flash applet, it gets updated. I can also interact with the applet, however, the changes are only visible after I do the tab switching.
Any help or hint how to find the cause of the problem is greatly appreciated!
Thanks in advance,
PhotonX

A new finding: I tried to install an older version of Firefox and downloaded a binary from https://ftp.mozilla.org/pub/mozilla.org … /releases/. The older binary worked so I tried newer ones and finally arrived at the very same version as the one installed through the package management. The result is: The 33.0.2 binary downloaded from Mozilla works, the 33.0.2 installed through the package management doesn't! All extensions installed on my machine are available in the downloaded binary, so I assume that it knows about ~/.mozilla. What could be the cause of the problem then? Will try to start Firefox with a completely clean home folder (new user) and report back.
edit: Narrowed down the list of problematic files to this:
$ ls -l /home/photon/.mozilla/firefox/sw0n83fl.default/
insgesamt 94852
-rw------- 1 photon users 94222 31. Okt 11:22 prefs.js
-rw------- 1 photon users 141109 31. Okt 11:17 search.json
-rw------- 1 photon users 734 31. Okt 11:06 search-metadata.json
-rw-r--r-- 1 photon users 65536 19. Jun 2012 search.sqlite
-rw------- 1 photon users 16384 30. Apr 2011 secmod.db
-rw------- 1 photon users 288 31. Okt 11:22 sessionCheckpoints.json
-rw------- 1 photon users 2480 31. Okt 11:22 sessionstore.js
-rw-r--r-- 1 photon users 393216 4. Sep 08:49 signons.sqlite
-rw------- 1 photon users 25 15. Mai 2013 times.json
-rw-r--r-- 1 photon users 62914560 21. Nov 2012 urlclassifier3.sqlite
-rw------- 1 photon users 154 31. Okt 10:26 urlclassifierkey3.txt
-rw-r--r-- 1 photon users 1622446 21. Nov 2012 urlclassifier.pset
-rw-r--r-- 1 photon users 31850496 31. Okt 11:22 webappsstore.sqlite
edit: The problematic file is prefs.js.
Last edited by PhotonX (2014-10-31 10:29:25)

Groups field in Windows Active Directory doesn't get updated

Hello IDM Experts,
I am trying to append one more group to a few hundred users in AD. When I run the below code, I am not getting any error and at the same time the groups field in AD doesn't seem to get updated either. Any thoughts? Thanks!
<Activity id='1' name='CheckOut'>
<Action id='0' name='Check Out AD' application='com.waveset.session.WorkflowServices'>
    <Argument name='op' value='checkoutView' />
    <Argument name='type' value='User' />
    <Argument name='id' value='$(userId)' />
    <Argument name='authorized' value='true' />
    <Argument name='subject' value='Configurator' />
    <Argument name='Form' value='Empty Form'/>
    <Return from='view' to='userview' />
</Action>
<Action id='2' name='Change AD Values'>
    <expression>
      <block>
        <append name='userview.accounts[Sample Domain].groups'>
          <s>CN=grp_ext_owner,OU=Task Groups,OU=Groups,DC=sample,DC=com</s>
        </append>
        <ref>userview.accounts[Sample Domain].groups</ref>
      </block>
    </expression>
</Action>
<Action id='3' name='Check In AD' application='com.waveset.session.WorkflowServices'>
    <Argument name='op' value='checkinView' />
    <Argument name='view' value='$(userview)' />
    <Argument name='authorized' value='true' />
    <Argument name='subject' value='Configurator' />
</Action>
<Transition to='end' />
</Activity>

Some ideas...
1) Do you have a mapping of the groups attribute in your Sample Domain resource adapter? One element should read similar to:
<AccountAttributeType id='10' name='groups' syntax='string' mapName='groups' mapType='string'/>2) Is the groups attribute already a list? If not (e.g. no groups yet assigned), the append statement might not actually do anything.
3) Your statement below the append doesn't actually do anything. Well, it should not break anything, but who knows.

ScrollPane: thumb doesn't get updated after contents of scrollpane change

Hi,
I some content in a scrollpane. The horizontal scrollbar(thumb) is showing because the content is to big to fit horizontally.
The problem is if the content changes, i.e. gets smaller for example, the scrollbars don't get updated. Only after touching them with the mouse do they shrink/grow accordingly.
Is this a bug (it looks like it)? Is there a workaround?
Thanks in advance,

Sounds like a bug. Can you file the issue in JIRA?
Thanks!
Richard

Windows10 tech preview build 10041 doesn't get updated for some reason

is there a way to force an update? I believe there were a couple of updates , but for some reason my build didn't get updated
tx,
D

Hi,
At least, we have preview build 10049 now, if you want to experience it, then you can change the install speed to "fast" in Settings\Update&Recovery\Windows Update\Advanced Options. If you don't want to experience it, then leave the setting
in "Slow". If you've already set to fast and didn't get any updates, then pleaes check the following registry:
Open regedit.exe
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
Ensure the following values exist:
{value name}, {value type}, {value data}
BranchName, REG_SZ, fbl_impressive
ThresholdOptedin, REG_DWORD, 1
ThresholdRiskLevel, REG_SZ, low
Delete all other values
Open Settings
> Update & recovery > Windows Update
Tap or click Check
for updates
System also has a built-in troubleshooter, launch control panel\All control panel items\Troubleshooting\System and Security\Windows Update, run this troubleshooter.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Config.xml doesn't get updated in WLW

Hi,
When I try to update the server port number in the Weblogic Workshop console (via
Tools -> Preferences -> Path -> Port), I was unsuccessful in achieving that. I
changed port number from 7001 to 7010. This doesn't modify the config.xml. When
I start the samples server, it tries to start the server in the same port (i.e.,
7001) causing bind exception. Is this something to do with configuration file
not being updated. Am I getting wrong somewhere?
Any thoughts on this?
Thanks,
Arul

Hi Arulazi,
Adding to Michael Wooten's post, the change you make (via the Tools ->
Preferences -> Path -> Port) only changes the port number to which Workshop
connects to. This will be used when you want the same IDE to connect to
different workshop enabled WebLogic Servers.
This change will not be reflected in the config.xml file.
The information will be updated in the .workshop file found in the
C:\Documents and Settings\username directory.
If you want to change the listen port for the server you will have to edit
it via the server console at http://localhost:7001/console
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
,"Michael Wooten" <[email protected]> wrote in message
news:[email protected]..
>
Hi Arulazi,
I think this is just you assuming that changing the information in thatdialog
box, effects the config.xml of the WebLogic Server instance Workshop itsusing
I don't think it does anything to the config.xml. It only tells Workshopwhich
WebLogic Server instance you want it to use.
Again, unless you've actually seen some documentation that states thatperforming
the operation you mentioned changes the config.xml, I think the behavioryou are
currently getting is the way it is supposed to be :-)
Regards,
Mike Wooten
"Arulazi D" <[email protected]> wrote:
Hi,
When I try to update the server port number in the Weblogic Workshop
console (via
Tools -> Preferences -> Path -> Port), I was unsuccessful in achieving
that. I
changed port number from 7001 to 7010. This doesn't modify the
config.xml.
When
I start the samples server, it tries to start the server in the same
port (i.e.,
7001) causing bind exception. Is this something to do with configuration
file
not being updated. Am I getting wrong somewhere?
Any thoughts on this?
Thanks,
Arul

Finder 'item info' doesn't get updated

10.4.6, on my PowerBook 1.5Ghz 15"
I have 'show item info' selected in Desktop View Options.
My hard drive icon has size and free space displayed, but didn't update (weeks ago) when I deleted 10G of files. If I select the icon, and do 'Get Info', it shows correct sizes.
Anybody seen this? Know the solution?
It has always worked correctly on my PowerMac Quad G5, on every os version I've used so far.

-

Site doesn't get updated

I've created a site with iWeb, embedded a song and clicked on the Publish button. The site was published, but I forgot to make the song loop. So I went to iWeb and checked the loop box in the Inspector (quicktime tab). I saved the change and hit Publish. However, when I visit the site the song doesn't loop.
Am I missing something?
TIA

Dan:
Try using the File->Publish All to MobileMe option. That often will get all changes uploaded.
As a side note if you've set the audio file to play automatically you might consider setting the volume low before publishing as seen here so it doesn't blow out some unsuspecting visitor who might have their sound turned up high for some other reason. Then the visitor can up the volume as they see fit.
OT

Hard disc space doesn't get updated

Hi!
I have a Macbook 2Ghz Core Duo. 60 GB HD. well, now I got about 7,5 GB free. I I was planing of cleaning up my HD. Remove pictures, duplicates and not used software.
The problem is that when I trash something, and empty the trash. The HD info lower the free space instead of freeing. I was as low as 100mb so I rebootet my macbook and it shows 15GB free.
What can the problem be? And still after taht reboot, it still got that problem.
(btw. not using firevault)
MacBook Mac OS X (10.4.8) 2 Ghz Intel Core Duo, 1 Gb RAM

The harddive icon on the desktop doesn't seem to be updating at all times for some reason. A finder window in the same volume shows the right free space in the bottom of the window.
Martin

When we change the non-mandatory field in the form, it doesn't get updated

Hi... I have one question here..
If I have non-mandatory fields in a custom form, and when I query the form and change the value in the non-mandatory field and click on save, then it doesn't save. It says 'No Changes to Save'. But, it's not the same for non-mandatory fields.
Can you please suggest me?
-vrdida

VRdida,
If I understand correctly, you have a non-Required item in your form that has an LOV assigned. While this item is Required=No, it works correctly. When you change the Required property of the item to 'Yes' then it fails. When this occurs, do you get an error message? Are you able to select a value from the LOV?
It sounds like the Required=Yes property might be preventing you f rom opening the LOV. Try setting the Module property: Defer Required Enforcement = Yes. This is the typical setting in an EBS form. This is what allows you to navigate out of a Required field if the value is NULL, but will give you a Required message when you attempt to save the record if the value is still NULL.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Apr 6, 2011 11:43 AM

ICal on iMac doesn't get updates from MobileMe - does update to MobileMe

Hello,
I use an iMac and an iPhone and sync using MobileMe. The syncing works without a problem between the iPhone and MobileMe but not the iCal syncing (address book works fine) between the iMac and MobileMe. When I add something to iCal on my iMac it goes to MobileMe and turns up on my iPhone but things added on my iPhone does not appear on my iMac (it does go to MobileMe though). I've tried Reset Sync Data where I've ticked the replace calendars on iMac with calendars from MobileMe but still it doesn't turn up in my iCal on the iMac. I've unregistered and re-registered the iMac, I've scrapped the preferences and anything else I can think of (and read) but nothing works. Any ideas? Please! I feel rather desperate by now...
Another minor problem I have is that on my iPhone I have a subscribed calendar that has turned up as one of my calendars. It's empty and doesn't really do any harm (that I know of) but it's annoying. The subscribed one with the same name still works as it should. How do I get rid of the one that now looks like it's one of mine? It doesn't exist when I log into MobileMe or on my iMac.
Desperately hoping someone can help me, especially with problem no 1....

Hi,
What all USB devices do you have connected?
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then see if it sleeps & wakes in Safe Mode.

OpenDirectory Replica doesn't get updated

Similar Messages

Maybe you are looking for