Opendirectoryd / fax debug
Hello.
I started to observe my kernel log / system konsole for what's going on and I saw opendirectoryd - has made 9 logs of starting something and here's log outputs (first & last) these logs are under "fax" and that's why I get interested, becouse I do not have any attempts & software what would need this options:
2013-03-28 16:11:44.418 EET - opendirectoryd (build 172.17) launched...
2013-03-28 16:11:44.419 EET - Logging level limit changed to 'error'
2013-03-28 16:11:52.873 EET - Initialize trigger support
2013-03-28 16:11:52.874 EET - Registered node with name '/Active Directory' as hidden
2013-03-28 16:11:52.874 EET - Registered node with name '/Configure' as hidden
2013-03-28 16:11:52.875 EET - Discovered configuration for node name '/Contacts' at path '/Library/Preferences/OpenDirectory/Configurations//Contacts.plist'
2013-03-28 16:11:52.875 EET - Registered node with name '/Contacts'
2013-03-28 16:11:52.875 EET - Registered node with name '/LDAPv3' as hidden
2013-03-28 16:11:52.877 EET - Registered node with name '/Local' as hidden
2013-03-28 16:11:52.878 EET - Registered node with name '/NIS' as hidden
2013-03-28 16:11:52.879 EET - Discovered configuration for node name '/Search' at path '/Library/Preferences/OpenDirectory/Configurations//Search.plist'
2013-03-28 16:11:52.879 EET - Registered node with name '/Search'
2013-03-28 16:11:52.880 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/legacy.bundle'
2013-03-28 16:11:52.882 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/search.bundle'
2013-03-28 16:11:53.884 EET - '/Search' has registered, loading additional services
2013-03-28 16:11:53.884 EET - Initialize augmentation support
2013-03-28 16:11:53.887 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/SystemCache.bundle'
2013-03-28 16:11:53.891 EET - Successfully registered for Kernel identity service requests
2013-03-28 16:11:53.896 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
2013-03-28 16:11:53.897 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/FDESupport.bundle'
2013-03-28 16:11:53.910 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ConfigurationProfiles.bundle'
2013-03-28 16:11:53.910 EET - Registered subnode with name '/Local/Default'
2013-03-28 16:12:10.289 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ldap.bundle'
2013-03-05 18:22:48.204 EET - opendirectoryd (build 172.17) launched...
2013-03-05 18:22:48.204 EET - Logging level limit changed to 'error'
2013-03-05 18:22:48.229 EET - Initialize trigger support
2013-03-05 18:22:48.230 EET - Registered node with name '/Active Directory' as hidden
2013-03-05 18:22:48.231 EET - Registered node with name '/Configure' as hidden
2013-03-05 18:22:48.232 EET - Discovered configuration for node name '/Contacts' at path '/Library/Preferences/OpenDirectory/Configurations//Contacts.plist'
2013-03-05 18:22:48.232 EET - Registered node with name '/Contacts'
2013-03-05 18:22:48.232 EET - Registered node with name '/LDAPv3' as hidden
2013-03-05 18:22:48.235 EET - Registered node with name '/Local' as hidden
2013-03-05 18:22:48.237 EET - Registered node with name '/NIS' as hidden
2013-03-05 18:22:48.238 EET - Discovered configuration for node name '/Search' at path '/Library/Preferences/OpenDirectory/Configurations//Search.plist'
2013-03-05 18:22:48.238 EET - Registered node with name '/Search'
2013-03-05 18:22:48.240 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/legacy.bundle'
2013-03-05 18:22:48.242 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/search.bundle'
2013-03-05 18:22:49.244 EET - '/Search' has registered, loading additional services
2013-03-05 18:22:49.244 EET - Initialize augmentation support
2013-03-05 18:22:49.248 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/SystemCache.bundle'
2013-03-05 18:22:49.252 EET - Successfully registered for Kernel identity service requests
2013-03-05 18:22:49.259 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
2013-03-05 18:22:49.260 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/FDESupport.bundle'
2013-03-05 18:22:49.272 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ConfigurationProfiles.bundle'
2013-03-05 18:22:49.273 EET - Registered subnode with name '/Local/Default'
2013-03-05 18:23:23.981 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ldap.bundle'
2013-03-05 18:37:30.017 EET - Starting shutdown process...
2013-03-05 18:37:30.017 EET - Deregistered with Kernel for identity service requests
I'm trying to debug why this process has started, no problems with softwares / installs. Everything works fine.
But I think my computer got hacked some time ago. After that I installed e.g. Little Snitch Network monitor (still using demo version) and Avira virus scanner.
No log / other unusual behavior after that.
Any suggestions where to look / where to dig?
These are DSP level messages used by the developers, there is no publicly available decodes for these. Please be aware most of the voice/fax debug syntax will change starting 12.3(8)T
which includes this debug command as well.
Similar Messages
-
T.37 onramp fax sometimes sends empty attachment
We have T.37 onramp fax set up with incoming calls arriving on a T1 line into a Cisco 2811, and SMTP emails with fax attachments going out to our custom mailserver. We have many of these systems in the field. Most of the time onramp faxes work fine, but we sometimes see the 2811 sending an empty attachment to the mailserver. We have captured the incoming audio and decoded the fax using the Asterisk PBX utilities, with no errors at all.
What could cause a 2811 to send an empty fax attachment even though the incoming fax is good?
Here is the SMTP conversation (with names and numbers changed) -- red from the 2811, blue from the mailserver:
220-svr02.company.com Simple Mail Transfer Service Ready
220 ESMTP spoken here.
EHLO faxgateway.company.com
250-svr02.company.com
250-CHUNKING
250-DSN
250-AUTH CRAM-MD5 LOGIN PLAIN
250-AUTH=CRAM-MD5 LOGIN PLAIN
250-X-DCL-SOURCE
250-X-DCL-CALLID
250-X-DCL-DSN
250-X-DCL-REPLACE
250-X-DCL-TRANSCRIPT
250-X-DCL-SENT-ITEMS
250-X-DCL-GHOST
250-X-MSW-NOTIFY-SUPPRESS
250-X-MSW-OP
250 SIZE 0
MAIL FROM:<[email protected]>
250 OK
RCPT TO:<[email protected]>
250 OK
DATA
354 Start mail input, end with <CRLF>.<CRLF>
Received: by faxgateway.company.com for <[email protected]> (with Cisco NetWorks); Thu, 21 Nov 2013 16:22:01 -0500
To: "1231231234" <[email protected]>
Message-ID: <[email protected]>
Date: Thu, 21 Nov 2013 16:22:01 -0500
Subject: Fax
X-Mailer: Technical Support: http://www.cisco
MIME-Version: 1.0
Content-Type: multipart/fax-message;
boundary="yradnuoB=_7FCF2013162201695.faxgateway.company.com"
From: "2342342345" <[email protected]>
X-Account-Id: 0
--yradnuoB=_7FCF2013162201695.faxgateway.company.com
Content-ID: <[email protected]>
Content-Type: image/tiff; name="Cisco_fax.tif"; application=faxbw
Content-Disposition: attachment
Content-Transfer-Encoding: base64
--yradnuoB=_7FCF2013162201695.faxgateway.company.com--
550 Fax message contains 0 pages
Note that our custom mailserver rejects these empty fax attachments because we want the sending fax machine to see a failure in this case. (If the mailserver were to accept the empty attachment, then the sender would see success but the receiver would receive no fax.)
The 2811 is running IOS 12.4(25d) and non-default DSP software 26.4.501 (updated to fix a problem with the DIS tones). But we've been seeing this problem since 12.4(6)T7 with no DSP firmware patch.
We've enabled all the relevant fax debug logs we can find, and here's the debug output for a 'zero-page fax' call from the point where the T1 connection is established, down to the point where the empty attachment is sent and the mailserver rejects it (names and numbers changed as before):
Nov 21 21:21:53.511: ISDN Se1/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0xAA14
Channel ID i = 0xA98382
Exclusive, Channel 2
Nov 21 21:21:53.511: ISDN Se1/0:23 Q931: TX -> CONNECT pd = 8 callref = 0xAA14
Nov 21 21:21:53.539: ISDN Se1/0:23 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x2A14
Nov 21 21:21:53.543: %ISDN-6-CONNECT: Interface Serial1/0:1 is now connected to N/A N/A
Nov 21 21:21:56.511: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
CSI_PACKET(1231231234)
DIS_PACKET(speed=5, resolution=1, encoding=1)
Nov 21 21:21:56.511: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_response_receive, PROCESSING
Nov 21 21:21:59.399: //50796/C6DA8CB3B86D/FMSP/t30_rx_flag:
received flag of modulation: 0
Nov 21 21:21:59.399: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_response_receive, PROCESSING
Nov 21 21:21:59.739: //50796/C6DA8CB3B86D/FMSP/t30_rx_flag:
received flag of modulation: 0
Nov 21 21:22:00.719: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_response_receive, PROCESSING
Nov 21 21:22:01.311: //50796/C6DA8CB3B86D/FMSP/fax2_response_receive:
msg dump (size=23):
FF C0 C2 1C EC 8C 2C 8C 2C 4C 6C AC 4C 04 04 04 04 04 04 04
04 04 04
Nov 21 21:22:01.311: //50796/C6DA8CB3B86D/FMSP/fax2_response_receive:
received=TSI, remote id string:= 2342342345
Nov 21 21:22:01.311: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_response_receive, PROCESSING
Nov 21 21:22:01.407: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_response_receive, PROCESSING
Nov 21 21:22:01.647: //50796/C6DA8CB3B86D/FMSP/fax2_response_receive:
msg dump (size=10):
FF C8 C1 00 45 1F 01 01 01 00
Nov 21 21:22:01.647: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_response_receive, PROCESSING
Nov 21 21:22:01.691: //50796/C6DA8CB3B86D/FMSP/fax2_response_receive:
in response receive WAIT FOR CD
Nov 21 21:22:01.691: //50796/C6DA8CB3B86D/CCAPI/cc_api_event_indication:
Event=36, Call Id=50796
Nov 21 21:22:01.691: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
received DCS_PACKET, BR=9, resolution=0,encoding=1, remote_id_string= 2342342345
Nov 21 21:22:01.691: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
wait for ready for data from application
Nov 21 21:22:01.691: //50796/C6DA8CB3B86D/FOIP_ON/lapp_on_application:
Event(Tag=36, Name=CC_EV_FROM_FMSP_ON_CALL_DETAIL, Disposition=0)
Call Record(Call State=LAPP_ON_CS_FMSP_CALL_DETAIL(2))
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_validate_context:exit@984
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_msp_event:
Event(Tag=36, Name=CC_EV_FROM_FMSP_ON_CALL_DETAIL)
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Prepare MSPI Call Setup Request
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Envelope [email protected]
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Envelope [email protected]
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
RFC822 To Comment=1231231234
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Faxmail Subject=Fax
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Disposition Notification=
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Originator TSI=RFC822 From Comment=2342342345
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Auth/Account ID: `0'
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:
Call Setup Request To MSPI
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=FALSE, Mode=0,
Outgoing Dial-peer=3, Params=0x45E136F0, Progress Indication=NULL(0)
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/CCAPI/ccCallSetupRequest:
Destination Pattern=.T, Called Number=1231231234, Digit Strip=FALSE
Nov 21 21:22:01.691: //50795/C6DA8CB3B86D/CCAPI/ccCallSetupRequest:
Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=1231231234(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=
Account Number=, Final Destination Flag=TRUE,
Guid=C6DA8CB3-5229-11E3-B86D-58BC273896C0, Outgoing Dial-peer=3
Nov 21 21:22:01.695: //50795/C6DA8CB3B86D/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=1231231234
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=-1
cisco-rdnplan=-1
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1
Nov 21 21:22:01.695: //50795/C6DA8CB3B86D/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x453B5564, Interface Type=19, Destination=, Mode=0x0,
Call Params(Calling Number=(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Al lowed),
Called Number=1231231234(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE, Outgoing Dial-peer=3, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id= )
Nov 21 21:22:01.695: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_new_context_guid:exit@2190
Nov 21 21:22:01.695: //50797/C6DA8CB3B86D/MSPI_ON/mspi_call_setup_request:
Outgoing Peer Tag=3
Envelope [email protected]
Envelope [email protected]
Mime Outer Type=2
Nov 21 21:22:01.695: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_open:
[email protected], [email protected]
Nov 21 21:22:01.695: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_open:exit@1881
Nov 21 21:22:01.695: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_add_headers:
from_comment=2342342345
Nov 21 21:22:01.695: //50795/C6DA8CB3B86D/VTSP:(1/0:23):1:1:1/vtsp_spi_event_handler:
Event Category=1, Event=138
Nov 21 21:22:01.695: //50797/C6DA8CB3B86D/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=19, FlowMode=1
Nov 21 21:22:01.695: //50797/C6DA8CB3B86D/CCAPI/ccCallSetContext:
Context=0x44047884
Nov 21 21:22:01.695: //50797/C6DA8CB3B86D/FOIP_ON/lapp_on_setup_mspi:exit@791
Nov 21 21:22:01.695: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_conference_fmsp_dmsp:
Starting Conference with FMSP and DMSP
Nov 21 21:22:01.695: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_conference_fmsp_dmsp:
Tiff File Created; Time=2013:11:21 16:22:01
Nov 21 21:22:01.699: //50798/C6DA8CB3B86D/DMSP/docmsp_call_setup_request:
ramp data dir=ONRAMP, conf dir=DEST
Nov 21 21:22:01.699: //50796/xxxxxxxxxxxx/CCAPI/ccConferenceCreate:
(confID=0x440478F0, callID1=0xC66C, callID2=0xC66E, tag=0x0)
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/CCAPI/ccConferenceCreate:
Conference Id=0x440478F0, Call Id1=50796, Call Id2=50798, Tag=0x0
Nov 21 21:22:01.699: //50796/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0x8B2C, Source Interface=0x45F255A0, Source Call Id=50796,
Destination Call Id=50798, Disposition=0x0, Tag=0x0
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/CCAPI/cc_api_caps_ind:
Destination Interface=0x45F2554C, Destination Call Id=50798, Source Call Id=50796,
Caps(Codec=0x4, Fax Rate=0x2, Vad=0x2,
Modem=0x0, Codec Bytes=20, Signal Type=2)
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=250(ms), Fax Nom=300(ms))
Nov 21 21:22:01.699: //50798/C6DA8CB3B86D/DMSP/docmsp_caps_ind:
CallId=50798, srcCallId=50796
Nov 21 21:22:01.699: //50798/C6DA8CB3B86D/DMSP/docmsp_bridge:
conf id=0x8B2C, srcCallId=50798, dstCallId=50796,
ramp data dir=ONRAMP, conf dir=DEST, encode out=0
Nov 21 21:22:01.699: //50798/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0x8B2C, Source Interface=0x45F2554C, Source Call Id=50798,
Destination Call Id=50796, Disposition=0x0, Tag=0x0
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/CCAPI/cc_generic_bridge_done:
Conference Id=0x8B2C, Source Interface=0x45F2554C, Source Call Id=50798,
Destination Call Id=50796, Disposition=0x0, Tag=0x0
Nov 21 21:22:01.699: //50798/C6DA8CB3B86D/DMSP/docmsp_bridge:
Bridge done
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x8B2C, Destination Call Id=50795)
Nov 21 21:22:01.699: //50798/C6DA8CB3B86D/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x8B2C, Destination Call Id=50796)
Nov 21 21:22:01.699: //50798/C6DA8CB3B86D/CCAPI/ccCallSetContext:
Context=0x44047884
Nov 21 21:22:01.699: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_change_state:
Old State=LAPP_ON_CS_FMSP_CALL_DETAIL(2),
New State=LAPP_ON_CS_FMSP_DMSP_CONFERENCING(3)
Nov 21 21:22:01.699: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_msp_event:exit@2079
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/FOIP_ON/lapp_on_application:
Event(Tag=29, Name=CC_EV_CONF_CREATE_DONE, Disposition=0)
Call Record(Call State=LAPP_ON_CS_FMSP_DMSP_CONFERENCING(3))
Nov 21 21:22:01.699: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_validate_context:exit@984
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/FOIP_ON/lapp_on_conference_created:
FMSP and DMSP Are Conferenced
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/FOIP_ON/lapp_on_conference_created:
Sending RECEIVE ENABLE to FMSP
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/CCAPI/ccDeliverEvent:
Event Category=0, Call Id=50796
Nov 21 21:22:01.699: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_change_state:
Old State=LAPP_ON_CS_FMSP_DMSP_CONFERENCING(3),
New State=LAPP_ON_CS_FMSP_PAGE_ACCEPT_REQUESTED(4)
Nov 21 21:22:01.699: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
send CFR_PACKET
Nov 21 21:22:01.703: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_configure_rx_data, STILL_LOOKING, T2 timer not expired
Nov 21 21:22:01.703: //50796/C6DA8CB3B86D/CCAPI/cc_process_notify_bridge_done:
Conference Id=0x8B2C, Call Id1=50796, Call Id2=50798
Nov 21 21:22:01.847: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
socket 0 readable for first time
Nov 21 21:22:01.863: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
socket 0 readable for first time
Nov 21 21:22:01.863: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 220-svr02.company.com Simple Mail Transfer Service Ready
Nov 21 21:22:01.863: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
socket 0 readable for first time
Nov 21 21:22:01.863: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 220 ESMTP spoken here.
Nov 21 21:22:01.863: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: EHLO faxgateway.company.com
Nov 21 21:22:01.863: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.875: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-svr02.company.com
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-CHUNKING
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-DSN
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-AUTH CRAM-MD5 LOGIN PLAIN
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-AUTH=CRAM-MD5 LOGIN PLAIN
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-SOURCE
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-CALLID
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-DSN
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-REPLACE
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-TRANSCRIPT
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-SENT-ITEMS
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-DCL-GHOST
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-MSW-NOTIFY-SUPPRESS
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250-X-MSW-OP
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250 SIZE 0
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: MAIL FROM:<[email protected]>
Nov 21 21:22:01.879: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.895: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250 OK
Nov 21 21:22:01.895: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: RCPT TO:<[email protected]>
Nov 21 21:22:01.895: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.911: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 250 OK
Nov 21 21:22:01.911: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 354 Start mail input, end with <CRLF>.<CRLF>
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Received: by faxgateway.company.com for <[email protected]> (with Cisco NetWorks); Thu, 21 Nov 2013 16:22:01 -0500
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: To: "1231231234" <[email protected]>
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Message-ID: <[email protected]>
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Date: Thu, 21 Nov 2013 16:22:01 -0500
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Subject: Fax
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: X-Mailer: Technical Support: http://www.cisco
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: MIME-Version: 1.0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Content-Type: multipart/fax-message;
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: boundary="yradnuoB=_7FCF2013162201695.faxgateway.company.com"
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: From: "2342342345" <[email protected]>
Nov 21 21:22:01.927: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:01.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: X-Account-Id: 0
Nov 21 21:22:01.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/MSPI_ON/mspi_check_connect:
MMccb(Count=0)
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/MSPI_ON/mspi_check_connect:
SMTP Connected To The Server !
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/CCAPI/cc_api_call_connected:
Interface=0x453B5564, Data Bitmask=0x0, Progress Indication=NULL(0),
Connection Handle=0
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/FOIP_ON/lapp_on_application:
Event(Tag=8, Name=CC_EV_CALL_CONNECTED, Disposition=0)
Call Record(Call State=LAPP_ON_CS_FMSP_PAGE_ACCEPT_REQUESTED(4))
Nov 21 21:22:02.695: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_validate_context:exit@984
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/FOIP_ON/lapp_on_call_connected:
MSPI call connected:
Start Conferencing DMSP and MSPI
Nov 21 21:22:02.695: //50798/xxxxxxxxxxxx/CCAPI/ccConferenceCreate:
(confID=0x440478F4, callID1=0xC66E, callID2=0xC66D, tag=0x0)
Nov 21 21:22:02.695: //50798/C6DA8CB3B86D/CCAPI/ccConferenceCreate:
Conference Id=0x440478F4, Call Id1=50798, Call Id2=50797, Tag=0x0
Nov 21 21:22:02.695: //50798/C6DA8CB3B86D/DMSP/docmsp_bridge:
conf id=0x8B2D, srcCallId=50798, dstCallId=50797,
ramp data dir=ONRAMP, conf dir=SRC, encode out=0
Nov 21 21:22:02.695: //50798/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0x8B2D, Source Interface=0x45F2554C, Source Call Id=50798,
Destination Call Id=50797, Disposition=0x0, Tag=0x0
Nov 21 21:22:02.695: //50798/C6DA8CB3B86D/DMSP/docmsp_bridge:
Bridge done
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/MSPI/mspi_bridge:
MMccb(State=CONNECTED, Type=Onramp), Destination Call Id=50798
Nov 21 21:22:02.695: //50797/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0x8B2D, Source Interface=0x453B5564, Source Call Id=50797,
Destination Call Id=50798, Disposition=0x0, Tag=0x0
Nov 21 21:22:02.695: //50798/C6DA8CB3B86D/CCAPI/cc_generic_bridge_done:
Conference Id=0x8B2D, Source Interface=0x453B5564, Source Call Id=50797,
Destination Call Id=50798, Disposition=0x0, Tag=0x0
Nov 21 21:22:02.695: //50798/C6DA8CB3B86D/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x8B2D, Destination Call Id=50796)
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x8B2D, Destination Call Id=50795)
Nov 21 21:22:02.695: //50797/C6DA8CB3B86D/CCAPI/ccCallSetContext:
Context=0x44047884
Nov 21 21:22:02.695: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_call_connected:exit@2508
Nov 21 21:22:02.695: //50798/C6DA8CB3B86D/FOIP_ON/lapp_on_application:
Event(Tag=29, Name=CC_EV_CONF_CREATE_DONE, Disposition=0)
Call Record(Call State=LAPP_ON_CS_FMSP_PAGE_ACCEPT_REQUESTED(4))
Nov 21 21:22:02.695: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_validate_context:exit@984
Nov 21 21:22:02.699: //50798/C6DA8CB3B86D/CCAPI/cc_process_notify_bridge_done:
Conference Id=0x8B2D, Call Id1=50798, Call Id2=50797
Nov 21 21:22:06.487: //50796/C6DA8CB3B86D/FMSP/t30_rx_flag:
received flag of modulation: 0
Nov 21 21:22:06.487: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_configure_rx_data, DETECTED_COMMAND
Nov 21 21:22:06.487: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_command_receive, NO_COMMAND, T2 timer not expired
Nov 21 21:22:12.275: //50796/C6DA8CB3B86D/FMSP/t30_rx_flag:
received flag of modulation: 0
Nov 21 21:22:13.207: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_command_receive, PROCESSING
Nov 21 21:22:13.267: //50796/C6DA8CB3B86D/FMSP/fax2_command_receive:
msg dump (size=3):
FF C8 F4
Nov 21 21:22:13.267: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_command_receive, PROCESSING
Nov 21 21:22:13.287: //50796/C6DA8CB3B86D/FMSP/fax2_phaseB_receive:
fax2_command_receive, RECEIVED_COMMAND
Nov 21 21:22:13.287: //50796/C6DA8CB3B86D/FMSP/fax2_phaseD_receive:
received EOP
Nov 21 21:22:13.287: //50798/C6DA8CB3B86D/DMSP/docmsp_xmit:
srcCallId=50796, dstCallId=50798, direction=0
Nov 21 21:22:13.287: //50796/C6DA8CB3B86D/FMSP/fax2_phaseD_receive:
waiting for page acceptance by the application
Nov 21 21:22:13.287: //50797/C6DA8CB3B86D/MSPI_ON/mspi_xmit:
MMccb(State=CONFERENCED, Type=Onramp, Buffer Count=0),
Source Call Id=50798
Nov 21 21:22:13.287: //50797/C6DA8CB3B86D/MSPI_ON/mspi_onramp_xmit:
EOD Received
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: --yradnuoB=_7FCF2013162201695.faxgateway.company.com
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Content-ID: <[email protected]>
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Content-Type: image/tiff; name="Cisco_fax.tif"; application=faxbw
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Content-Disposition: attachment
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: Content-Transfer-Encoding: base64
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_send_data_cisco:exit@849
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: --yradnuoB=_7FCF2013162201695.faxgateway.company.com--
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
Sending terminating dot ...(socket=0)
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_writeln:
(C)S: .
Nov 21 21:22:13.931: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_write:
return code=0
Nov 21 21:22:13.959: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_getln:
(C)R: 550 Fax message contains 0 pages
Nov 21 21:22:13.959: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
error in SMTP server's response to terminating "."
Nov 21 21:22:13.959: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
ERROR, socket=0
Nov 21 21:22:13.959: //-1/C6DA8CB3B86D/SMTPC/esmtp_client_engine_work_routine:
Finishing, socket=-1, bytes send=1091
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/MSPI_ON/mspi_onramp_buff_finished_callback:
MMccb(Call State=CONFERENCED, Buffer Count=1)
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/MSPI_ON/mspi_onramp_buff_finished_callback:
EOD Received; Status=1
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/MSPI_ON/mspi_onramp_buff_finished_callback:
Message [email protected]
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/MSPI_ON/mspi_onramp_buff_finished_callback:
Status=1
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/MSPI/mspi_set_disconnect_text:
MMccb(Disconnect Cause=network out of order (38): SMTP client engine not completed)
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/CCAPI/cc_api_call_disconnected:
Cause Value=38, Interface=0x453B5564, Call Id=50797
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=38, Retry Count=0)
Nov 21 21:22:13.959: //50797/C6DA8CB3B86D/FOIP_ON/lapp_on_application:
Event(Tag=11, Name=CC_EV_CALL_DISCONNECTED, Disposition=0)
Call Record(Call State=LAPP_ON_CS_FMSP_PAGE_ACCEPT_REQUESTED(4))
Nov 21 21:22:13.963: //50795/C6DA8CB3B86D/FOIP_ON/lapp_on_validate_context:exit@984Still not solved. Cisco support suggested adding the config command 'mta send success-fax-only' which is supposed to prevent sending empty emails or partial faxes, however there's a bug that means that has no effect IOS 12.4. We're looking at upgrading to 15.1(4)M8 which has the fix, but that will take some time.
Your problem sounds slightly different. See if you can get a network capture of the SMTP conversation with the target mailserver, to see if something's going wrong there. -
Opendirectoryd debug help needed
Hello.
I started to observe my kernel log / system konsole for what's going on and I saw opendirectoryd - has made 9 logs of starting something and here's log outputs (first & last) these logs are under "fax" and that's why I get interested, becouse I do not have any attempts & software what would need this options:
2013-03-28 16:11:44.418 EET - opendirectoryd (build 172.17) launched...
2013-03-28 16:11:44.419 EET - Logging level limit changed to 'error'
2013-03-28 16:11:52.873 EET - Initialize trigger support
2013-03-28 16:11:52.874 EET - Registered node with name '/Active Directory' as hidden
2013-03-28 16:11:52.874 EET - Registered node with name '/Configure' as hidden
2013-03-28 16:11:52.875 EET - Discovered configuration for node name '/Contacts' at path '/Library/Preferences/OpenDirectory/Configurations//Contacts.plist'
2013-03-28 16:11:52.875 EET - Registered node with name '/Contacts'
2013-03-28 16:11:52.875 EET - Registered node with name '/LDAPv3' as hidden
2013-03-28 16:11:52.877 EET - Registered node with name '/Local' as hidden
2013-03-28 16:11:52.878 EET - Registered node with name '/NIS' as hidden
2013-03-28 16:11:52.879 EET - Discovered configuration for node name '/Search' at path '/Library/Preferences/OpenDirectory/Configurations//Search.plist'
2013-03-28 16:11:52.879 EET - Registered node with name '/Search'
2013-03-28 16:11:52.880 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/legacy.bundle'
2013-03-28 16:11:52.882 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/search.bundle'
2013-03-28 16:11:53.884 EET - '/Search' has registered, loading additional services
2013-03-28 16:11:53.884 EET - Initialize augmentation support
2013-03-28 16:11:53.887 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/SystemCache.bundle'
2013-03-28 16:11:53.891 EET - Successfully registered for Kernel identity service requests
2013-03-28 16:11:53.896 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
2013-03-28 16:11:53.897 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/FDESupport.bundle'
2013-03-28 16:11:53.910 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ConfigurationProfiles.bundle'
2013-03-28 16:11:53.910 EET - Registered subnode with name '/Local/Default'
2013-03-28 16:12:10.289 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ldap.bundle'
2013-03-05 18:22:48.204 EET - opendirectoryd (build 172.17) launched...
2013-03-05 18:22:48.204 EET - Logging level limit changed to 'error'
2013-03-05 18:22:48.229 EET - Initialize trigger support
2013-03-05 18:22:48.230 EET - Registered node with name '/Active Directory' as hidden
2013-03-05 18:22:48.231 EET - Registered node with name '/Configure' as hidden
2013-03-05 18:22:48.232 EET - Discovered configuration for node name '/Contacts' at path '/Library/Preferences/OpenDirectory/Configurations//Contacts.plist'
2013-03-05 18:22:48.232 EET - Registered node with name '/Contacts'
2013-03-05 18:22:48.232 EET - Registered node with name '/LDAPv3' as hidden
2013-03-05 18:22:48.235 EET - Registered node with name '/Local' as hidden
2013-03-05 18:22:48.237 EET - Registered node with name '/NIS' as hidden
2013-03-05 18:22:48.238 EET - Discovered configuration for node name '/Search' at path '/Library/Preferences/OpenDirectory/Configurations//Search.plist'
2013-03-05 18:22:48.238 EET - Registered node with name '/Search'
2013-03-05 18:22:48.240 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/legacy.bundle'
2013-03-05 18:22:48.242 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/search.bundle'
2013-03-05 18:22:49.244 EET - '/Search' has registered, loading additional services
2013-03-05 18:22:49.244 EET - Initialize augmentation support
2013-03-05 18:22:49.248 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/SystemCache.bundle'
2013-03-05 18:22:49.252 EET - Successfully registered for Kernel identity service requests
2013-03-05 18:22:49.259 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
2013-03-05 18:22:49.260 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/FDESupport.bundle'
2013-03-05 18:22:49.272 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ConfigurationProfiles.bundle'
2013-03-05 18:22:49.273 EET - Registered subnode with name '/Local/Default'
2013-03-05 18:23:23.981 EET - Loaded bundle at path '/System/Library/OpenDirectory/Modules/ldap.bundle'
2013-03-05 18:37:30.017 EET - Starting shutdown process...
2013-03-05 18:37:30.017 EET - Deregistered with Kernel for identity service requests
I'm trying to debug why this process has started, no problems with softwares / installs. Everything works fine.
But I think my computer got hacked some time ago. After that I installed e.g. Little Snitch Network monitor (still using demo version) and Avira virus scanner.
No log / other unusual behavior after that.
Any suggestions where to look / where to dig?Any suggestions where to look / where to dig?
Yes. Get rid of the worthless "Avira" product and the dubious "Little Snitch" product. Stop worrying about the log. Log messages are only meaningful in relation to a problem, which you say you don't have. -
Debug on Voice GW for a Fax Call
Hi Everyone,
I have a problem very strange,
My configuration,
Site A = GW 3845 (MGCP with CUCM) with PRI (E1) / ATA SIP Linksys with a fax behind,
Site B = GW 3845 (MGCP with CUCM) with BRI (T0) / FXS with a fax
On a fax call, site A => site B, the fax don't arrived on site B.
When a do a test Site X with an other E1 send a fax to site B, the fax arrived correctly.
A use several debugs on site B because site A receives too much call to use a debug command on it.
On a debug with fax KO, one of the differences with the fax calls which work is this,
Feb 10 14:10:12.311: htsp_process_event: [1/0/1, FXSLS_CONNECT, E_DSP_SIG_0100]fxsls_offhook_onhook, HF duration Max=1000, HF duration Min=150
Feb 10 14:10:12.311: htsp_timer - 1000 msec
Feb 10 14:10:13.311: htsp_process_event: [1/0/1, FXSLS_CONNECT, E_HTSP_EVENT_TIMER]fxsls_connect_wait_release_req
Feb 10 14:10:13.311: htsp_timer_stop
Somebody knows this command ?
it's a timer on the FXS because what ??To be more clear, it's a new debug with 3 debug commands,
debug vpm signal
debug voice ccapi inout
debug fax relay t30 all-level-1
=======================================================================================
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x705E61AC, Interface Type=6, Destination=, Mode=0x9,
Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=D000000002abffeb000000F500000026)
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Feb 13 10:47:23.777: :cc_get_feature_vsa malloc success
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Feb 13 10:47:23.777: cc_get_feature_vsa count is 5
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Feb 13 10:47:23.777: :FEATURE_VSA attributes are: feature_name:0,feature_time:1722572728,feature_id:66271
Feb 13 10:47:23.777: //66281/90857BF3807C/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=6, FlowMode=1
Feb 13 10:47:23.777: //66281/90857BF3807C/CCAPI/ccCallSetContext:
Context=0x65F232A8
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x70515E80, Interface Type=9, Destination=0.0.0.0, Mode=0x9,
Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call Count On=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=D000000002abffeb000000F500000026)
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Feb 13 10:47:23.777: :cc_get_feature_vsa malloc success
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Feb 13 10:47:23.777: cc_get_feature_vsa count is 6
Feb 13 10:47:23.777: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Feb 13 10:47:23.777: :FEATURE_VSA attributes are: feature_name:0,feature_time:1722574024,feature_id:66272
Feb 13 10:47:23.777: //66282/90857BF3807C/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
Feb 13 10:47:23.777: //66282/90857BF3807C/CCAPI/ccCallSetContext:
Context=0x65F22D28
Feb 13 10:47:23.777: //66282/90857BF3807C/CCAPI/cc_api_call_connected:
Interface=0x70515E80, Data Bitmask=0x0, Progress Indication=NULL(0),
Connection Handle=0
Feb 13 10:47:23.777: //66282/90857BF3807C/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
Feb 13 10:47:23.781: //66281/90857BF3807C/CCAPI/cc_api_call_proceeding:
Interface=0x705E61AC, Progress Indication=NULL(0)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_call_connected:
Interface=0x705E61AC, Data Bitmask=0x1, Progress Indication=DESTINATION IS NON ISDN(2),
Connection Handle=0
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/ccCallModify:
Nominator=0x1000, Params=0x715D4B78, Call Id=66281
Feb 13 10:47:23.785: //66281/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x102E9, digit_event=0x1, enable=TRUE, consume=FALSE)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=66281
Feb 13 10:47:23.785: //66281/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x705E61AC, callID=0x102E9, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x705E61AC, Call Id=66281
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=10000(ms), Inter Digit Timeout=10000(ms))
Feb 13 10:47:23.785: //66281/xxxxxxxxxxxx/CCAPI/ccConferenceCreate:
(confID=0x715D4D1C, callID1=0x102E9, callID2=0x102EA, tag=0x0)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/ccConferenceCreate:
Conference Id=0x715D4D1C, Call Id1=66281, Call Id2=66282, Tag=0x0
Feb 13 10:47:23.785: //66281/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0x8101, Source Interface=0x705E61AC, Source Call Id=66281,
Destination Call Id=66282, Disposition=0x0, Tag=0xFFFFFFFF
Feb 13 10:47:23.785: //66282/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0x8101, Source Interface=0x70515E80, Source Call Id=66282,
Destination Call Id=66281, Disposition=0x0, Tag=0x0
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_generic_bridge_done:
Conference Id=0x8101, Source Interface=0x70515E80, Source Call Id=66282,
Destination Call Id=66281, Disposition=0x0, Tag=0x0
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x8101, Destination Call Id=66282)
Feb 13 10:47:23.785: //66282/90857BF3807C/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0x8101, Destination Call Id=66281)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_caps_ind:
Destination Interface=0x70515E80, Destination Call Id=66282, Source Call Id=66281,
Caps(Codec=0x1, Fax Rate=0x1, Vad=0x1,
Modem=0x2, Codec Bytes=20, Signal Type=3)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=200(ms), Fax Nom=300(ms))
Feb 13 10:47:23.785: //66282/90857BF3807C/CCAPI/cc_api_caps_ind:
Destination Interface=0x705E61AC, Destination Call Id=66281, Source Call Id=66282,
Caps(Codec=0x1, Fax Rate=0x2, Vad=0x1,
Modem=0x0, Codec Bytes=160, Signal Type=2)
Feb 13 10:47:23.785: //66282/90857BF3807C/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=250(ms), Fax Nom=300(ms))
Feb 13 10:47:23.785: //66282/90857BF3807C/CCAPI/cc_api_caps_ack:
Destination Interface=0x705E61AC, Destination Call Id=66281, Source Call Id=66282,
Caps(Codec=g711ulaw(0x1), Fax Rate=FAX_RATE_VOICE(0x2), Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=160, Signal Type=2, Seq Num Start=609)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_caps_ack:
Destination Interface=0x70515E80, Destination Call Id=66282, Source Call Id=66281,
Caps(Codec=g711ulaw(0x1), Fax Rate=FAX_RATE_VOICE(0x2), Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=160, Signal Type=2, Seq Num Start=609)
Feb 13 10:47:23.785: //66281/90857BF3807C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x705E61AC, Call Id=66281
Feb 13 10:47:23.789: //66281/90857BF3807C/CCAPI/cc_api_voice_mode_event:
Call Id=66281
Feb 13 10:47:23.789: //66281/90857BF3807C/CCAPI/cc_api_voice_mode_event:
Call Entry(Context=0x65F232A8)
Feb 13 10:47:23.789: //66281/90857BF3807C/CCAPI/cc_process_notify_bridge_done:
Conference Id=0x8101, Call Id1=66281, Call Id2=66282
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/ccSetDigitTimeouts:
Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms)
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/ccSetDigitTimeouts:
Call Entry(Inter Digit Timeout=4000(ms), Initial Digit Timeout=4000(ms))
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/ccRestartDigitTimeoutMsec:
Digit Timeout=0, Call Id=66281
Feb 13 10:47:23.849: //66281/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x102E9, digit_event=0x1, enable=TRUE, consume=FALSE)
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=66281
Feb 13 10:47:23.849: //66281/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x705E61AC, callID=0x102E9, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x705E61AC, Call Id=66281
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms))
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/ccCallModifyExtended:
Nominator=0x715D48B0, Params=0x715D3D48, Call Id=66281
Feb 13 10:47:23.849: //66282/90857BF3807C/CCAPI/ccCallModify:
Nominator=0x28018830, Params=0x715D3ED8, Call Id=66282
Feb 13 10:47:23.849: //66281/90857BF3807C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x705E61AC, Call Id=66281
Feb 13 10:47:23.849: //66282/90857BF3807C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70515E80, Call Id=66282
Feb 13 10:47:23.982: //66281/90857BF3807C/CCAPI/ccCallModifyExtended:
Nominator=0x715D48B0, Params=0x715D3D48, Call Id=66281
Feb 13 10:47:23.982: //66282/90857BF3807C/CCAPI/ccCallModify:
Nominator=0x18E30, Params=0x715D3ED8, Call Id=66282
Feb 13 10:47:23.982: //66281/90857BF3807C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x705E61AC, Call Id=66281
GW3845#
Feb 13 10:47:23.982: //66282/90857BF3807C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70515E80, Call Id=66282
Feb 13 10:47:24.102: [1/0/1] set signal state = 0x4 timestamp = 0
Feb 13 10:47:24.102: [1/0/1] set signal state = 0x0 timestamp = 0
GW3845#
Feb 13 10:47:25.602: [1/0/1] set signal state = 0x4 timestamp = 0
Feb 13 10:47:26.546: htsp_process_event: [1/0/1, FXSLS_WAIT_OFFHOOK, E_DSP_SIG_1100]fxsls_waitoff_offhook
Feb 13 10:47:26.546: [1/0/1] set signal state = 0x4 timestamp = 0
Feb 13 10:47:26.554: [1/0/1] set signal state = 0x6 timestamp = 200
Feb 13 10:47:26.554: htsp_timer2 - 200 msec
Feb 13 10:47:26.754: htsp_process_event: [1/0/1, FXSLS_WAIT_OFFHOOK, E_HTSP_EVENT_TIMER2]fxsls_offhook_dial htsp_dial
Feb 13 10:47:26.754: //66279/8DB5DDBF807B/CCAPI/cc_api_call_connected:
Interface=0x70990EB4, Data Bitmask=0x1, Progress Indication=DESTINATION IS NON ISDN(2),
Connection Handle=0
Feb 13 10:47:26.754: //66279/8DB5DDBF807B/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
Feb 13 10:47:26.754: htsp_process_event: [1/0/1, FXSLS_CONNECT, E_DSP_DIALING_DONE]
Feb 13 10:47:26.754: //66279/8DB5DDBF807B/CCAPI/ccGenerateToneInfo:
Stop Tone On Digit=FALSE, Tone=Null,
Tone Direction=Host, Params=0x0, Call Id=66279
Feb 13 10:47:26.754: //66279/8DB5DDBF807B/CCAPI/ccCallFeature:
Feature Type=34, Call Id=66279
Feb 13 10:47:26.754: //66279/8DB5DDBF807B/CCAPI/ccGenerateToneInfo:
Stop Tone On Digit=FALSE, Tone=Null,
Tone Direction=Network, Params=0x0, Call Id=66279htsp_call_feature:feature 34
Feb 13 10:47:26.754: htsp_process_event: [1/0/1, FXSLS_CONNECT, E_HTSP_STOP_RINGING]
Feb 13 10:47:26.758: //66277/8DB4A4D6807A/CCAPI/ccGenerateToneInfo:
Stop Tone On Digit=FALSE, Tone=Null,
Tone Direction=Network, Params=0x0, Call Id=66277
Feb 13 10:47:26.758: //66277/8DB4A4D6807A/CCAPI/ccCallModifyExtended:
Nominator=0x715D48B0, Params=0x715D3D48, Call Id=66277
Feb 13 10:47:26.758: //66278/8DB4A4D6807A/CCAPI/ccCallModify:
Nominator=0x28018830, Params=0x715D3ED8, Call Id=66278
Feb 13 10:47:26.762: //66279/8DB5DDBF807B/CCAPI/ccCallModifyExtended:
Nominator=0x715D48B0, Params=0x715D3D48, Call Id=66279
Feb 13 10:47:26.762: //66280/8DB5DDBF807B/CCAPI/ccCallModify:
Nominator=0x28018830, Params=0x715D3ED8, Call Id=66280
Feb 13 10:47:26.762: //66279/8DB5DDBF807B/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:26.762: //66278/8DB4A4D6807A/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70515E80, Call Id=66278
Feb 13 10:47:26.762: //66280/8DB5DDBF807B/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70515E80, Call Id=66280
Feb 13 10:47:26.762: //66277/8DB4A4D6807A/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x705F57B8, Call Id=66277
Feb 13 10:47:26.766: //66277/8DB4A4D6807A/CCAPI/ccCallModifyExtended:
Nominator=0x715D48B0, Params=0x715D3D48, Call Id=66277
Feb 13 10:47:26.766: //66278/8DB4A4D6807A/CCAPI/ccCallModify:
Nominator=0x18E30, Params=0x715D3ED8, Call Id=66278
Feb 13 10:47:26.766: //66277/8DB4A4D6807A/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x705F57B8, Call Id=66277
Feb 13 10:47:26.766: //66278/8DB4A4D6807A/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70515E80, Call Id=66278
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/ccSetDigitTimeouts:
Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms)
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/ccSetDigitTimeouts:
Call Entry(Inter Digit Timeout=4000(ms), Initial Digit Timeout=4000(ms))
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/ccRestartDigitTimeoutMsec:
Digit Timeout=0, Call Id=66279
Feb 13 10:47:26.766: //66279/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x102E7, digit_event=0x1, enable=TRUE, consume=FALSE)
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=66279
Feb 13 10:47:26.766: //66279/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x70990EB4, callID=0x102E7, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms))
Feb 13 10:47:26.766: //66279/8DB5DDBF807B/CCAPI/ccCallModifyExtended:
GW3845#Nominator=0x715D48B0, Params=0x715D3D48, Call Id=66279
Feb 13 10:47:26.770: //66280/8DB5DDBF807B/CCAPI/ccCallModify:
Nominator=0x18E30, Params=0x715D3ED8, Call Id=66280
Feb 13 10:47:26.770: //66279/8DB5DDBF807B/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:26.770: //66280/8DB5DDBF807B/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x70515E80, Call Id=66280
GW3845#
Feb 13 10:47:27.850: //66281/90857BF3807C/CCAPI/cc_handle_inter_digit_timer:
Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
GW3845#
Feb 13 10:47:30.766: //66279/8DB5DDBF807B/CCAPI/cc_handle_inter_digit_timer:
Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
GW3845#
Feb 13 10:47:32.642: //66279/8DB5DDBF807B/CCAPI/cc_api_call_feature:
Feature Type=1, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:32.642: //66279/8DB5DDBF807B/CCAPI/cc_api_t38_fax_start:
Destination Interface=0x70515E80, Destination Call Id=66280, Source Call Id=66279,
Caps(Codec=T38Fax(0x10000), Fax Rate=FAX_RATE_VOICE(0x2), Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=160, Signal Type=2)
Feb 13 10:47:32.642: //66280/8DB5DDBF807B/CCAPI/cc_api_call_feature:
Feature Type=38, Interface=0x70515E80, Call Id=66280
Feb 13 10:47:32.642: //66279/8DB5DDBF807B/CCAPI/cc_api_call_feature:
Feature Type=1, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:32.646: //66278/8DB4A4D6807A/CCAPI/cc_api_t38_fax_start:
Destination Interface=0x705F57B8, Destination Call Id=66277, Source Call Id=66278,
Caps(Codec=T38Fax(0x10000), Fax Rate=FAX_RATE_VOICE(0x2), Vad=ON(0x2),
Modem=OFF(0x0), Codec Bytes=20, Signal Type=2)
Feb 13 10:47:32.646: //66277/xxxxxxxxxxxx/CCAPI/cc_api_local_codec_dnld_done:
(dstVdbPtr=0x70515E80, dstCallId=0x102E6, srcCallId=0x102E5)
Feb 13 10:47:32.646: //66278/8DB4A4D6807A/CCAPI/cc_api_local_codec_dnld_done:
Destination Interface=0x70515E80, Destination Call Id=66278, Source Call Id=66277
Feb 13 10:47:32.646: //66278/8DB4A4D6807A/CCAPI/cc_api_call_feature:
Feature Type=39, Interface=0x70515E80, Call Id=66278
Feb 13 10:47:32.646: //66278/8DB4A4D6807A/CCAPI/cc_api_set_fax_mode:
Destination Interface=0x70515E80, Destination Call Id=66278, Source Call Id=66277
Feb 13 10:47:32.650: //66280/8DB5DDBF807B/CCAPI/cc_api_t38_fax_start:
Destination Interface=0x70990EB4, Destination Call Id=66279, Source Call Id=66280,
Caps(Codec=T38Fax(0x10000), Fax Rate=FAX_RATE_VOICE(0x2), Vad=ON(0x2),
Modem=OFF(0x0), Codec Bytes=20, Signal Type=2)
Feb 13 10:47:32.650: //66277/8DB4A4D6807A/CCAPI/cc_api_remote_codec_dnld_done:
Destination Interface=0x705F57B8, Destination Call Id=66277, Source Call Id=66278, Xmit Function=0x629E293C
Feb 13 10:47:32.650: //66279/xxxxxxxxxxxx/CCAPI/cc_api_local_codec_dnld_done:
(dstVdbPtr=0x70515E80, dstCallId=0x102E8, srcCallId=0x102E7)
Feb 13 10:47:32.650: //66280/8DB5DDBF807B/CCAPI/cc_api_local_codec_dnld_done:
Destination Interface=0x70515E80, Destination Call Id=66280, Source Call Id=66279
Feb 13 10:47:32.650: //66280/8DB5DDBF807B/CCAPI/cc_api_call_feature:
Feature Type=39, Interface=0x70515E80, Call Id=66280
Feb 13 10:47:32.650: //66280/8DB5DDBF807B/CCAPI/cc_api_set_fax_mode:
Destination Interface=0x70515E80, Destination Call Id=66280, Source Call Id=66279
Feb 13 10:47:32.650: //66279/8DB5DDBF807B/CCAPI/cc_api_remote_codec_dnld_done:
GW3845#Destination Interface=0x70990EB4, Destination Call Id=66279, Source Call Id=66280, Xmit Function=0x629E293C
Feb 13 10:47:32.666: 0/1/1 (66277) 350318798 fr-entered=10(ms)
Feb 13 10:47:32.666: 1/0/1 (66279) 350996292 fr-entered=10(ms)
GW3845#
timestamp=350997292 fr-msg-det NSF
timestamp=350320118 fr-msg-tx NSF
GW3845#
timestamp=350998472 fr-msg-det CSI
timestamp=350321288 fr-msg-tx CSI
timestamp=350999212 fr-msg-det DIS
GW3845#
timestamp=350322038 fr-msg-tx DIS
GW3845#
timestamp=350324988 fr-msg-det TSI
timestamp=351002782 fr-msg-tx TSI
timestamp=350325758 fr-msg-det DCS
GW3845#
timestamp=351003562 fr-msg-tx DCS
GW3845#
timestamp=351007142 fr-msg-det CFR
timestamp=350329968 fr-msg-tx CFR
GW3845#
Feb 13 10:47:49.638: htsp_process_event: [1/0/1, FXSLS_CONNECT, E_DSP_SIG_0100]fxsls_offhook_onhook, HF duration Max=1000, HF duration Min=150
Feb 13 10:47:49.638: htsp_timer - 1000 msec
Feb 13 10:47:50.638: htsp_process_event: [1/0/1, FXSLS_CONNECT, E_HTSP_EVENT_TIMER]fxsls_connect_wait_release_req
Feb 13 10:47:50.638: htsp_timer_stop
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/cc_api_call_disconnected:
Cause Value=16, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=16, Retry Count=0)
Feb 13 10:47:50.638: //66279/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x102E7, digit_event=0x0, enable=FALSE, consume=FALSE)
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=66279
Feb 13 10:47:50.638: //66279/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x70990EB4, callID=0x102E7, disp=0, digit_event=0x0, enable=FALSE, consume=FALSE)
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x70990EB4, Call Id=66279
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms))
Feb 13 10:47:50.638: //66280/8DB5DDBF807B/CCAPI/ccGetCallStatistics:
Call Stats=0x715CF9E8, Call Id=66280
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/ccConferenceDestroy:
Conference Id=0x8100, Tag=0x0
Feb 13 10:47:50.638: //66279/xxxxxxxxxxxx/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x8100, Source Interface=0x70990EB4, Source Call Id=66279,
Destination Call Id=66280, Disposition=0x0, Tag=0x0
Feb 13 10:47:50.638: //66280/xxxxxxxxxxxx/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x8100, Source Interface=0x70515E80, Source Call Id=66280,
Destination Call Id=66279, Disposition=0x0, Tag=0x0
Feb 13 10:47:50.638: //66279/8DB5DDBF807B/CCAPI/cc_generic_bridge_done:
Conference Id=0x8100, Source Interface=0x70515E80, Source Call Id=66280,
Destination Call Id=66279, Disposition=0x0, Tag=0x0
Feb 13 10:47:50.642: //66279/8DB5DDBF807B/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=16)
Feb 13 10:47:50.642: //66279/8DB5DDBF807B/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
Feb 13 10:47:50.642: //66279/8DB5DDBF807B/CCAPI/cc_api_get_transfer_info:
Transfer Number Is Null
Feb 13 10:47:50.642: //66280/8DB5DDBF807B/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
Feb 13 10:47:50.642: //66280/8DB5DDBF807B/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
Feb 13 10:47:50.642: htsp_timer_stop3
Feb 13 10:47:50.642: //66280/8DB5DDBF807B/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x70515E80, Tag=0x0, Call Id=66280,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Feb 13 10:47:50.642: //66280/8DB5DDBF807B/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Feb 13 10:47:50.642: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.642: :cc_free_feature_vsa freeing 66AC6310
Feb 13 10:47:50.642: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.642: vsacount in free is 5
Feb 13 10:47:50.646: htsp_process_event: [1/0/1, FXSLS_WAIT_RELEASE_REQ, E_HTSP_RELEASE_REQ]fxsls_waitrls_req_rls
Feb 13 10:47:50.646: [1/0/1] set signal state = 0x4 timestamp = 0
Feb 13 10:47:50.646: [1/0/1] set signal state = 0x4 timestamp = 0
Feb 13 10:47:50.650: //66279/8DB5DDBF807B/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x70990EB4, Tag=0x0, Call Id=66279,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Feb 13 10:47:50.650: //66279/8DB5DDBF807B/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Feb 13 10:47:50.650: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.650: :cc_free_feature_vsa freeing 66AC6160
Feb 13 10:47:50.650: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.650: vsacount in free is 4
Feb 13 10:47:50.650: htsp_process_event: [1/0/1, FXSLS_ONHOOK, E_DSP_SIG_0100]fxsls_onhook_onhook
Feb 13 10:47:50.766: //66277/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x102E5, digit_event=0x0, enable=FALSE, consume=FALSE)
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=66277
Feb 13 10:47:50.766: //66277/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x705F57B8, callID=0x102E5, disp=0, digit_event=0x0, enable=FALSE, consume=FALSE)
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x705F57B8, Call Id=66277
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms))
Feb 13 10:47:50.766: //66278/8DB4A4D6807A/CCAPI/ccGetCallStatistics:
Call Stats=0x715D0D80, Call Id=66278
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/ccConferenceDestroy:
Conference Id=0x80FF, Tag=0x0
Feb 13 10:47:50.766: //66277/xxxxxxxxxxxx/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x80FF, Source Interface=0x705F57B8, Source Call Id=66277,
Destination Call Id=66278, Disposition=0x0, Tag=0x0
Feb 13 10:47:50.766: //66278/xxxxxxxxxxxx/CCAPI/cc_api_bridge_drop_done:
Conference Id=0x80FF, Source Interface=0x70515E80, Source Call Id=66278,
Destination Call Id=66277, Disposition=0x0, Tag=0x0
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/cc_generic_bridge_done:
Conference Id=0x80FF, Source Interface=0x70515E80, Source Call Id=66278,
Destination Call Id=66277, Disposition=0x0, Tag=0x0
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
Feb 13 10:47:50.766: //66277/8DB4A4D6807A/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
Feb 13 10:47:50.770: //66277/8DB4A4D6807A/CCAPI/cc_api_get_transfer_info:
Transfer Number Is Null
Feb 13 10:47:50.770: //66278/8DB4A4D6807A/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
Feb 13 10:47:50.770: //66278/8DB4A4D6807A/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
Feb 13 10:47:50.770: //66278/8DB4A4D6807A/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x70515E80, Tag=0x0, Call Id=66278,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Feb 13 10:47:50.770: //66278/8DB4A4D6807A/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Feb 13 10:47:50.770: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.770: :cc_free_feature_vsa freeing 66AC6238
GW3845#
Feb 13 10:47:50.770: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.770: vsacount in free is 3
Feb 13 10:47:50.778: //66277/8DB4A4D6807A/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x705F57B8, Tag=0x0, Call Id=66277,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Feb 13 10:47:50.778: //66277/8DB4A4D6807A/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
Feb 13 10:47:50.778: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.778: :cc_free_feature_vsa freeing 66AC5ED8
Feb 13 10:47:50.778: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
Feb 13 10:47:50.778: vsacount in free is 2 -
I have a client who is hubbed in city A and I am provideing them dial-tone in city B via a T1 with HDLC encap.
If I push their voice/fax out over the T1 to city B voice works just fine, but fax fails 80-90% of the time? I have re-directed their fax out city A PSTN and the fax works almost 100% of the time.
Here is a debug i have from the router the fax is hooked up to.
test-1#debug vpm all
20:02:49: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0xC timestamp=63044 systime=7216938
20:02:49: htsp_process_event: [1/0, FXSLS_ONHOOK, E_DSP_SIG_1100]fxsls_onhook_offhook htsp_setup_ind
20:02:49: [1/0] get_local_station_id calling num= calling name= calling time=10/12 21:36 orig
called=
20:02:49: TGRM: reg_invoke_tgrm_accept_call(1, TGRM_CALL_VOICE, TGRM_DIRECTION_IN, 0, 1, 0, 0)
20:02:49: TGRM: Calling vtsp_tsp_call_setup_ind().
20:02:49: TGRM: reg_invoke_tgrm_call_update(0, 1, 0, 0, 1, TGRM_CALL_BUSY, TGRM_CALL_VOICE,
TGRM_DIRECTION_IN)
20:02:49: dsp_digit_collect_on: [1/0] packet_len=20 channel_id=128 packet_id=35 min_inter_delay=240
max_inter_delay=9760 mim_make_time=10 max_make_time=100 min_brake_time=10 max_brake_time=100
20:02:49: htsp_process_event: [1/0, FXSLS_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]fxsls_check_auto_call
20:02:51: htsp_digit_ready(1/0): digit = 1
20:02:51: htsp_digit_ready(1/0): digit = 6
20:02:52: htsp_digit_ready(1/0): digit = 0
20:02:53: htsp_digit_ready(1/0): digit = 4
20:02:53: htsp_digit_ready(1/0): digit = 5
20:02:54: htsp_digit_ready(1/0): digit = 2
20:02:54: htsp_digit_ready(1/0): digit = 4
20:02:55: htsp_digit_ready(1/0): digit = 6
20:02:56: htsp_digit_ready(1/0): digit = 0
20:02:56: htsp_digit_ready(1/0): digit = 6
20:02:57: htsp_digit_ready(1/0): digit = 7
20:03:00: dsp_digit_collect_off: [1/0] packet_len=8 channel_id=128 packet_id=36
20:03:00: htsp_process_event: [1/0, FXSLS_OFFHOOK, E_HTSP_PROCEEDING]htsp_alert_notify
20:03:02: ipm_modem_relay_supported : false
20:03:02: ipm_modem_relay_supported : false
20:03:02: htsp_process_event: [1/0, FXSLS_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]htsp_connect: no_offhook
0 call_connected 0
20:03:09: htsp_process_event: [1/0, FXSLS_OFFHOOK, E_HTSP_CONNECT]fxsls_offhook_connect
20:03:09: [1/0] set signal state = 0x6 timestamp = 0
20:03:09: dsp_set_sig_state: [1/0] packet_len=12 channel_id=128 packet_id=39 state=0x6
timestamp=0x0htsp_call_feature:feature 24
htsp_call_feature: caller id enable 0x0 call_connected 1htsp_call_feature: feature 24, caller id not
enabled.
test-1#
test-1# #Fails below here#
test-1#
20:03:49: htsp_timer_stop3 htsp_release_req: cause 16, no_onhook 0
20:03:50: htsp_process_event: [1/0, FXSLS_CONNECT, E_HTSP_RELEASE_REQ]fxsls_connect_disc
20:03:50: htsp_timer_stop
20:03:50: [1/0] set signal state = 0xC timestamp = 0
20:03:50: dsp_set_sig_state: [1/0] packet_len=12 channel_id=128 packet_id=39 state=0xC timestamp=0x0
20:03:50: [1/0] set signal state = 0x4 timestamp = 750
20:03:50: dsp_set_sig_state: [1/0] packet_len=12 channel_id=128 packet_id=39 state=0x4
timestamp=0x2EE
20:03:50: htsp_timer - 950 msec
20:03:51: htsp_process_event: [1/0, FXSLS_CPC, E_HTSP_EVENT_TIMER]fxsls_cpc_timer
20:03:51: dsp_req_sig_state: [1/0] packet_len=8 channel_id=128 packet_id=40
20:03:51: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0xC timestamp=365 systime=7223104
20:03:51: htsp_timer - 60000 msec
20:03:51: htsp_process_event: [1/0, FXSLS_WAIT_ONHOOK, E_DSP_SIG_1100]fxsls_waitonhook_offhook
20:04:05: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0x4 timestamp=8567 systime=7224598
20:04:05: htsp_process_event: [1/0, FXSLS_WAIT_ONHOOK, E_DSP_SIG_0100]fxsls_waitonhook_onhook
20:04:05: htsp_timer_stop htsp_report_onhook_sig
20:04:05: TGRM: reg_invoke_tgrm_call_update(0, 1, 0, 0, 1, TGRM_CALL_IDLE, TGRM_CALL_VOICE,
TGRM_DIRECTION_IN)
20:04:05: ipm_dsprm_close_cleanup
test-1#What gateway protocol are you using (MGCP, H.323, SIP)? What codec are you using over the WAN (g.729, g.711, etc)? Fax transmissions do not work well with compression. Depending on your infrastructure and preferences, you have several options. Take a look at the following link. Specifically, see the sections on fax relay and fax pass-through. Another option is to set the region for your fax devices to a region that uses g.711 (no compression).
http://www.cisco.com/en/US/products/ps6441/products_configuration_guide_book09186a008053b4d3.html
Hope this helps. If so, please rate the post.
Brandon -
Output fax not getting triggered when sales order credit block is released
Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PMHi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1 Order 2*
1. ZFAX 1. ZFAX
10(Z010) 10(Z010)
0000122426 0000122427
2. ZFAX 2. ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM -
Hello All,
I have an issue with fax, it is connected to an fxs port on my h323 gateway. When a call comes from PRI and get connected to fax after I hear the fax tone the fax drops. IOS is Version 15.0(1)M4, and DSP is PVDM3.
My analysis:
The external calls hit gateway and it matches the pots dialpeer where my fax connected to. From the "debug voip vtsp all", I see Primary Fax Protocol=CISCO_FAX_RELAY, which is not enabled and we are using T38 relay and modem passthrough method for faxing. I believe PVDM3 does not work with Cisco Relay and couldn't allocate any dsp resources for the call and it drops. But still I wonder how gateway takes cisco relay.
Config:
voice service voip
allow-connections h323 to h323
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none
h323
emptycapability
modem passthrough nse codec g711ulaw
dial-peer voice 1001 pots
tone ringback alert-no-PI
description PSTN Incoming, Pattern:.
translation-profile incoming PSTN-to-PhoneDN
incoming called-number .
direct-inward-dial
dial-peer voice 999030 pots
tone ringback alert-no-PI
destination-pattern 3027898
progress_ind setup enable 3
port 0/3/0
Output of vtsp debug
Oct 4 20:30:07: //6824/97F0D7BD8350/VTSP:(0/1/0:15):7:1:1/vtsp_dsm_save_fax_config:
Fax Relay=ENABLED
Primary Fax Protocol=CISCO_FAX_RELAY, Fallback Fax Protocol=NONE_FAX_RELAY
Fax Relay CM Suppression :=ENABLED, Fax Relay ANS Suppression :=DISABLED
Fax Parameters Set By=Dialpeer, Peer=999030 (this is the peer where my fax connected to)
I have converted the port to MGCP and found its working, while faxing I see vtsp outputs
Oct 4 23:57:29: //7181/8FE17FEF8379/VTSP:(0/3/0):-1:1:2/vtsp_dsm_save_fax_config:
Fax Relay=DISABLED - MGCP Application
Primary Fax Protocol=IGNORE_FAX_RELAY, Fallback Fax Protocol=IGNORE_FAX_RELAY
Fax Relay CM Suppression :=ENABLED, Fax Relay ANS Suppression :=DISABLED
Fax Parameters Set By=MGCP Call Type --> I believe MGCP disabled the cisco fax relay and switch over to T38.
Oct 4 23:57:40: //7181/8FE17FEF8379/VTSP:(0/3/0):-1:1:2/vtsp_dsm_save_fax_config:
Fax Relay=ENABLED
Primary Fax Protocol=T38_FAX_RELAY, Fallback Fax Protocol=NONE_FAX_RELAY
Fax Relay CM Suppression :=ENABLED, Fax Relay ANS Suppression :=DISABLED
Fax Parameters Set By=MGCP Call Type
Can some one kindly suggest how to make it work on H323, also how we can force disabling cisco fax relay?As I mentioned earlier, we are using MGCP for that particular fax port and the gateway we use as H323.
Even I'm not pretty sure about using mixed protocol, I believe this gateway gonna used to support call center calls. SInce MGCP is easy for configs they might have confiugred only the port as MGCP endpoint.
Now its not working with both the cases, not in mgcp as well as fallback mode. Can you reveiw the debugs and see why I have to remove "modem passthrough" command from voice service voip section which of our standard config and works well with all other gateway of ours. Please help here. -
Outbound FAX is not working. Below is the Call Flow
FAX ServeràH.323àCUCMàMGCPàGatewayàE1 PRIàPSTN
The CUCM version is 8.0.3 while the gateway IOS version is 12.4(24)T5.
Collected the following
Packet Captures between FAX server and CUCM
CUCM traces
Debugs in PSTN Gateway
Below are the observations
H.225 Setup message is seen in packet captures and CUCM traces. See snippet below
16:53:00.684 |In Message -- H225SetupMsg -- Protocol= H225Protocol|*^*^*
16:53:00.684 |Ie - H225BearerCapabilityIe -- IEData= 04 03 90 90 A5 |*^*^*
16:53:00.685 |Ie - Q931CalledPartyIe -- IEData= 70 09 A1 39 36 33 32 33 39 39 38 |*^*^*
16:53:00.685 |Ie - H225UserUserIe -- IEData= 7E 00 86 05 30 88 06 00 08 91 4A 00 05 22 80 B5 00 00 30 13 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 00 AC 15 98 05 06 B8 00 14 15 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 00 D5 0D 98 00 07 00 AC 15 98 14 07 FB 11 00 25 13 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 01 00 01 00 01 00 01 00 01 00 01 40 40 B5 00 00 30 14 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 10 80 01 00 |*^*^*
16:53:00.685 |MMan_Id= 0. (iep= 0 dsl= 0 sapi= 0 ces= 0 IpAddr=149815ac IpPort=2043)|*^*^*
16:53:00.685 |IsdnMsgData1= 08 02 5B CA 05 04 03 90 90 A5 70 09 A1 39 36 33 32 33 39 39 38 7E 00 86 05 30 88 06 00 08 91 4A 00 05 22 80 B5 00 00 30 13 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 00 AC 15 98 05 06 B8 00 14 15 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 00 D5 0D 98 00 07 00 AC 15 98 14 07 FB 11 00 25 13 79 1B C9 3E 02 1F 3F 03 80 B9 FE 5F AC 75 01 00 01 00 01 00 01 00 01 00 01 40 40 B5 00 00 30 14 44 69 61 6C 6F 67 69 63 20 43 6F 72 70 6F 72 61 74 69 6F 6E 10 80 01 00 |*^*^*
16:53:00.685 |value H323-UserInformation ::= |*^*^*
16:53:00.685 |SPROCRas - {
h323-uu-pdu
h323-message-body setup :
protocolIdentifier { 0 0 8 2250 0 5 },
sourceInfo
vendor
vendor
t35CountryCode 181,
t35Extension 0,
manufacturerCode 48
productId '4469616C6F67696320436F72706F726174 ...'H
terminal
mc FALSE,
undefinedNode FALSE
destCallSignalAddress ipAddress :
ip 'AC159805'H,
port 1720
activeMC FALSE,
conferenceID '1415791BC93E021F3F0380B9FE5FAC75'H,
conferenceGoal create : NULL,
callType pointToPoint : NULL,
sourceCallSignalAddress ipAddress :
ip 'AC159814'H,
port 2043
callIdentifier
guid '2513791BC93E021F3F0380B9FE5FAC75'H
mediaWaitForConnect FALSE,|*^*^*
16:53:00.686 |
canOverlapSend FALSE,
multipleCalls FALSE,
maintainConnection FALSE,
presentationIndicator presentationAllowed : NULL,
screeningIndicator userProvidedVerifiedAndFailed
nonStandardData
nonStandardIdentifier h221NonStandard :
t35CountryCode 181,
t35Extension 0,
manufacturerCode 48
data '4469616C6F67696320436F72706F726174 ...'H
h245Tunneling FALSE
}|*^*^*
Based on this, the CUCM is doing correct digit analysis and routes the call to MGCP gateway’s endpoint S0/SU0/DS1-0/[email protected]
Gateway sends the ISDN q931 setup message to PSTN for which it does get the Call Proceed and Progress indicators
The gateway is dropping call in Cause Code “0x80AF - Resource unavailable, unspecified”. See Snippet below
016325: *May 2 17:12:47.661: MGCP Packet received from 172.21.152.5:2427--->
CRCX 5493 S0/SU0/DS1-0/[email protected] MGCP 0.1
C: D000000003d354dd000000F500000016
X: 1
L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
016383: *May 2 17:12:47.669: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0016
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0083, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA0, '96323998'
Plan:Unknown, Type:National
016384: *May 2 17:12:47.757: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8016
Channel ID i = 0xA98381
Exclusive, Channel 1
016385: *May 2 17:12:47.761: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x8016
Progress Ind i = 0x8181 - Call not end-to-end ISDN, may have in-band info
016386: *May 2 09:12:48.193: %C3800_ENVM-3-MFAIL_OFF: There is more than one failure with the Power System 1 or this Power System h
as been turned off.
016387: *May 2 17:12:51.669: //494/2E810F7780E1/CCAPI/cc_handle_inter_digit_timer:
Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
016388: *May 2 17:12:59.773: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x0016
Cause i = 0x80AF - Resource unavailable, unspecified
From the Fax Utility it shows No answer at Fax Number. Also it rings the remmote fax machine twice (Actually i can hear the ring as the macine is beside me)
Please help me to solve the issue. Except this other functions are working properly. Moreover I can send internal Fax from one user to other.
Thanks and Regards,
Ashfaque.Just a quick update, as per Cisco TAC the CUCM version 8.0.3 does not support gateway IOS version is 12.4(24)T5 (Later I found its only for conference option). So we upgraded the IOS to 15.1(1)T3. But still having the sam issue.
Thanks,
Ashfaque -
Faxing of SAPScript throwing exception
Dear All,
I am facing problem while sending Sales Order output through FAX. It is throwing exception in OPEN_FORM function module as FAX_NOT_VALID. I debugged and found that actually system is failing FM SX_NUMBER_TO_DEVTYPE which in turn showing that the exception has occured due to Node not found. Is it a configuaration issue? I tried to configure through SPRO but could not find any relevent place. Looking for your valuable suggestion.
Any suggestion!
Thanks and regards,
AtanuMake sure are you entering the correct fax number in the recepient.
Go to transaction SBWP - > create new message and try to send it as FAX. It you are not able to send fax via Business workplace then it implies that some setting is required form the BASIS.
Otherwise the parameters passed to the OPEN_FORM needs to be investigated. -
How to Print File as the same as picture/fax viewer ?
Hallo :
I wrote a program which can let the specified png file to be printed. (png file is about 17xx * 11xx, output to A4 paper)
The goal is the print result as the same as the windows built-in picture/fax viewer (by Full Page Fax Print Mode)
And I don't want the printer dialog to be appeared. So I tried to use java print service to achieve this goal.
Now I can print the file by printer.
But comparing to the result which is printed by the windows built-in picture fax viewer(use Full Page Fax Print Mode), my result looks like zoom in, not full page.
I tried some classes of javax.print.attribute.standard package, but no one worked.
So I tried to transform the image by myself. And I found a resource : [http://java.sun.com/products/java-media/2D/reference/faqs/index.html#Q_How_do_I_scale_an_image_to_fit]
It looks like what I wanted. But when I implemented the functionality according to that reference. The result is still the same, still zoom in...
I must said I am unfamiliar with java 2D. But this is a problem I must solve.
If the problem can be solved by only setting some classes of javax.print.attribute.standard, it's better.
But if can't be solved by that way, the transformation method is ok, too.
So does anyone can help me to solve this problem or pointed where I was wrong ? Thank you very much.
import java.io.*;
import java.net.*;
import java.text.DecimalFormat;
import java.awt.*;
import java.awt.geom.*;
import java.awt.image.ImageObserver;
import java.awt.print.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
public class TestImage{
private void testPrint2() {
Image img = Toolkit.getDefaultToolkit().getImage(A); // A is png file path
PrintRequestAttributeSet requestAttributeSet = new HashPrintRequestAttributeSet();
requestAttributeSet.add(new Copies(1));
requestAttributeSet.add(MediaSizeName.ISO_A4);
requestAttributeSet.add(OrientationRequested.PORTRAIT);
requestAttributeSet.add(MediaTray.MANUAL);
PrintService[] services = PrintServiceLookup.lookupPrintServices(null, requestAttributeSet);
if(services.length > 0){
DocPrintJob job = services[0].createPrintJob();
try {
job.print(new SimpleDoc(new TestPrint(img), DocFlavor.SERVICE_FORMATTED.PRINTABLE , null), requestAttributeSet);
} catch (PrintException pe) {
pe.getStackTrace();
class TestPrint implements Printable {
private Image image;
public TestPrint(Image image) {
this.image = image;
public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) throws PrinterException {
if(pageIndex > 0) {
return Printable.NO_SUCH_PAGE;
Graphics2D g2d = (Graphics2D) graphics;
//Set us to the upper left corner
g2d.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
AffineTransform at = new AffineTransform();
g2d.translate(0, 0);
//We need to scale the image properly so that it fits on one page.
double xScale = pageFormat.getImageableWidth() / image.getWidth(null);
double yScale = pageFormat.getImageableHeight() / image.getHeight(null);
// Maintain the aspect ratio by taking the min of those 2 factors and using it to scale both dimensions.
double aspectScale = Math.min(xScale, yScale);
//g2d.drawRenderedImage(image, at);
g2d.drawImage(image, at, (ImageObserver) this);
return Printable.PAGE_EXISTS;
public static void main(String[] args) {
new TestImage().testPrint2();
}Edited by: oppstp on Aug 3, 2010 10:14 AM
Edited by: oppstp on Aug 3, 2010 10:18 AMThanks for the reply.
Now my algorithm which I used is when the height of image is smaller than the height of A4 paper and the width of image
is larger than the width of A4 paper, I will rotate 90 degree of the image first, then I will scale the image.
Then I can get the approaching result when the width and height of the image are larger than the width and height of A4 paper.
But there was an additional error. That is when the width of image is larger than the width of A4 paper and
the height of image is smaller than the height of A4 paper. (like 17xx * 2xx).
Although the print result template is approaching the picture/fax viewer. But the print quality is so bad.
The texts are discontinue. I can see the white blank within the text. (the white line are the zone which printer doesn't print)
First I thought this problem might be DPI issue. But I don't know how to keep the DPI when rotating ?
(I dumped the rotate image, it rotates, but didn't keep the DPI value)
Does anyone know how to solve this strange problem ? Thanks a lot.
Below is my test code (the initial value of transX & transY and 875 are my experiment result)
import java.io.*;
import java.awt.*;
import java.awt.geom.*;
import java.awt.image.*;
import java.awt.print.*;
import javax.imageio.*;
import javax.print.*;
import javax.print.attribute.*;
import javax.print.attribute.standard.*;
public class TestCol{
private void testPrint2() throws Exception {
BufferedImage bSrc = ImageIO.read(new File(A)); // A is png file path
PrintRequestAttributeSet requestAttributeSet = new HashPrintRequestAttributeSet();
requestAttributeSet.add(new Copies(1));
requestAttributeSet.add(MediaSizeName.ISO_A4);
requestAttributeSet.add(OrientationRequested.PORTRAIT);
PrintService[] services = PrintServiceLookup.lookupPrintServices(null, requestAttributeSet);
if (services.length > 0) {
DocPrintJob job = services[0].createPrintJob();
try {
job.print(new SimpleDoc(new TestPrint(bSrc), DocFlavor.SERVICE_FORMATTED.PRINTABLE , null), requestAttributeSet);
} catch (PrintException pe) {
pe.getStackTrace();
class TestPrint implements Printable {
private BufferedImage image;
public TestPrint(BufferedImage image) {
this.image = image;
public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) throws PrinterException {
if(pageIndex > 0) {
return Printable.NO_SUCH_PAGE;
int transX = 10;
int transY = 35;
int imgWidth = image.getWidth();
int imgHeight = image.getHeight();
Graphics2D g2d = (Graphics2D) graphics;
//Set us to the upper left corner
AffineTransform at = new AffineTransform();
double xScale = 0.0;
double yScale = 0.0;
if((double)imgWidth > pageFormat.getImageableWidth()) {
if(imgHeight > 785) {
// X:image larger, Y:image larger -> scale all > 1, no rotate
xScale = pageFormat.getImageableWidth() / imgWidth;
yScale = (double)785 / imgHeight;
} else {
// X:image larger, Y:image smaller -> rotate right 90 degree than scale X
// rotate right 90 degree
at.translate(imgHeight/2.0, imgWidth/2.0);
at.rotate(Math.toRadians(90.0));
at.translate(-0.5*imgWidth, -0.5*imgHeight);
//at.preConcatenate(g2d.getTransform()); // if add this line, the result is zoom out many times, and the result is not one page
try {
// output rotating image for debug
BufferedImage bDest = new BufferedImage(imgHeight, imgWidth, BufferedImage.TYPE_INT_RGB);
Graphics2D g = bDest.createGraphics();
g.drawRenderedImage(image, at);
ImageIO.write(bDest, "PNG", new File(B)); // B is output png file path
} catch (Exception ex) {
ex.printStackTrace();
transX = (int)((pageFormat.getImageableWidth() - imgHeight)/2);
xScale = 1.0;
yScale = (double)785 / imgWidth;
} else {
if(imgHeight > 785) {
// X:image smaller, Y:image larger -> no rotate, scale Y
xScale = 1.0;
yScale = (double)785 / imgHeight;
} else {
// X:image smaller , Y:image smaller -> no scale, no rotate
xScale = 1.0;
yScale = 1.0;
g2d.translate(transX, transY);
g2d.scale(xScale, yScale);
g2d.drawRenderedImage(image, at);
return Printable.PAGE_EXISTS;
public static void main(String[] args) {
try {
new TestCol().testPrint2();
} catch (Exception ex) {
ex.printStackTrace();
}Edited by: oppstp on Aug 4, 2010 10:46 AM -
Hp office jet 7500 won't send fax, control panel doesn't work
Control panel on HP Officejet 7500a printer/fax does not function, pressing icons is fruitless
New ink cartridges recently installed
Using 2 line telephone connectionHi @cam100,
I am wondering if a reset might help.
I will send you a PM (Private Message), but before I do, feel free to review the HP Privacy Statement.
This Privacy Statement informs you of our privacy practices and of the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is readily available on our HP.com home page and at the bottom of every HP web page.
There are an increasing number of posts in this forum and elsewhere in the internet with the steps to do a resets on different printers. The reset itself will sometimes fix problems, so the reset is not the issue.
Some resets require you to enter button combinations to open special menus on your printer that you were never meant to access. These special menus are used by the developers and support personnel for debugging issues, but they are not meant for untrained users and can have unintended results. One wrong button push and you no could no longer have a printer, but instead a pricey paper weight. To top it off, if you do happen to "brick" the printer this way, it is considered customer induced damage, and voids the warranty automatically. These resets are only meant to be given out and used as a last resort, and under direct instruction of a HP tech support representative. They should not be done lightly!
Printer Resets: What You Should Know
Please check the little envelope on the top right hand corner of the forums page to check your Forums inbox.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Can't Send FAX / FAX not working
Dear Techies,
I am facing a horrible problem in sending FAX. In our company, our directors are using MAC Book Air & Mac Book. I have a MAC Book too (i am a newbie to MAC), which they had given me for testing purpose, so that i should clear all their problems in MAC. so its actually a tough thing...
Now, they are not able to send FAX from these machines. They asked me to provide them the solution, and i tried in and out in my MAC Book, But no way... I googled a lot, i found many of the discussions based on this issue, but i didnt saw any working solution for it. Now its the 3rd day for me to sit with this issue. Hope someone will be here to help me. Let me give you the details...
Hardware: MAC book and Mac Book Air
OS: MAC OS X Version 10.4.10
CPU: 2.16 Ghz Intel Core Duo
Mem: 2 GB 667Mhz DDR2
MODEM: External Apple USB modem
Scenario 1:
I tried sending the fax from safari (File--> Print--> Fax PDF), then specified our internal FAX number, also Dialing prefix as 9(bcoz i am behind a EPABX, so 9 to get dial tone)
To: 63452743 (Fax number, not original)
Dialing Prefix: 9
Dialing: Tone (selected)
Sound: on (selected)
Wait for dial tone before dialing: selected
then i clicked "FAX"
but the result was; FAILURE...
Result 1:
It will dial, and stands like connected, while showing a progress bar "Faxing" in the external modem window. after around 3 minutes, it stops... and shows the following message in the external modem window;
"hold until 05:01 p.m."
again it will try at that specified time, and the result is same.
Scenario2:
I tried with fax command;
fax send 9-66728437 test-file.001
and i tried
fax send 966728437 test-file.001
Result2:
It will also do the same like above and finally gives up, and then it will write a log as the following;
command;
abcs-computer:~ kmr$ sudo fax send 9-66766766 test-file.001
Password:
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Tue Aug 12 17:03:17 2008 opened /dev/cu.usbmodem
efax: 03:18 using Motorola SM56 USB 1.5.6 in class 1
efax: 03:19 dialing T9-667667667
efax: 05:19 Error: dial command failed
efax: 05:19 failed -> test-file.001
efax: 05:19 done, returning 2 (unrecoverable error)
There were errors (see T9-667667667.log).
abcs-computer:~ kmr$
Log;
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Tue Aug 12 17:03:15 2008 TIFF version 4.2 file (little-endian)
efax: 03:15 TIFF directory at 8 with 17 tags, last image.
efax: 03:15 page 1 : test-file.001 + 234 : 1728x2156 @ 204x196 dpi TIFF/FAX
efax: 03:15 argv[0]=efax
efax: 03:15 argv[1]=-v
efax: 03:15 argv[2]=ewin
efax: 03:15 argv[3]=-v
efax: 03:15 argv[4]=chewmainrxtf
efax: 03:15 argv[5]=-d/dev/cu.usbmodem
efax: 03:15 argv[6]=-iZ
efax: 03:15 argv[7]=-i&FE0&D2S7=120
efax: 03:15 argv[8]=-i&C0
efax: 03:15 argv[9]=-iM1L0
efax: 03:15 argv[10]=-o1
efax: 03:15 argv[11]=-l
efax: 03:15 argv[12]=495 2322999
efax: 03:15 argv[13]=-kZ
efax: 03:15 argv[14]=-h
efax: 03:15 argv[15]=2008/08/12 17:03 495 2322999 Put Your Name Here p. %d/%d
efax: 03:15 argv[16]=-t
efax: 03:15 argv[17]=T9-667667667
efax: 03:15 argv[18]=test-file.001
efax: 03:17 opened /dev/cu.usbmodem
efax: 03:17 command "Q0V1"
efax: 03:17 waiting 2.0 s
efax: 03:17 .170 [ATQ0V1<CR><CR><LF>]
efax: 03:17 .401 [OK<CR><LF>]
efax: 03:17 response "OK"
efax: 03:17 command "Z"
efax: 03:17 waiting 5.0 s
efax: 03:17 .501 [ATZ<CR><CR><LF>]
efax: 03:17 .577 [OK<CR><LF>]
efax: 03:17 response "OK"
efax: 03:17 command "&FE0&D2S7=120"
efax: 03:17 waiting 5.0 s
efax: 03:17 .677 [AT&FE0&D2S7=120<CR><CR><LF>]
efax: 03:17 .903 [OK<CR><LF>]
efax: 03:17 response "OK"
efax: 03:18 command "&C0"
efax: 03:18 waiting 5.0 s
efax: 03:18 .078 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "M1L0"
efax: 03:18 waiting 5.0 s
efax: 03:18 .304 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "E0"
efax: 03:18 waiting 5.0 s
efax: 03:18 .505 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "I3"
efax: 03:18 waiting 5.0 s
efax: 03:18 .630 [<CR><LF>Motorola SM56 USB 1.5.6<CR><LF>]
efax: 03:18 .655 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 command "+FCLASS=1"
efax: 03:18 waiting 5.0 s
efax: 03:18 .850 [<CR><LF>OK<CR><LF>]
efax: 03:18 response "OK"
efax: 03:18 using Motorola SM56 USB 1.5.6 in class 1
efax: 03:18 command "+FTM=?"
efax: 03:18 waiting 5.0 s
efax: 03:18 .975 [<CR><LF>3,24,48,72,73,74,96,97,98,121,122,145,146<CR><LF>]
efax: 03:19 .000 [<CR><LF>OK<CR><LF>]
efax: 03:19 response "OK"
efax: 03:19 command "+FAR=1"
efax: 03:19 waiting 5.0 s
efax: 03:19 .126 [<CR><LF>ERROR<CR><LF>]
efax: 03:19 response "ERROR"
efax: 03:19 dialing T9-667667667
efax: 03:19 command "DT9-667667667"
efax: 03:19 waiting 120.0 s
efax: 05:19 Error: dial command failed
efax: 05:19 failed -> test-file.001
efax: 05:19 command "Q0V1"
efax: 05:19 waiting 2.0 s
efax: 05:19 .325 [<CR><LF>OK<CR><LF>]
efax: 05:19 response "OK"
efax: 05:19 command "Z"
efax: 05:19 waiting 5.0 s
efax: 05:19 .500 [<CR><LF>OK<CR><LF>]
efax: 05:19 response "OK"
efax: 05:19 done, returning 2 (unrecoverable error)
==========
Scenario 3:
i tried sending the Fax with efax command too;
efax -d /dev/cu.usbmodem -o a -v ewincm -t T9667667667 ts-fax.001
The result is same too...
command and log on the screen;
abcs-computer:~ kmr$ efax -d /dev/cu.usbmodem -o a -v ewincm -t T9667667667 ts-fax.001
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Tue Aug 12 13:38:44 2008 Warning: bind returned error 13 - Permission denied
efax: 38:44 opened /dev/cu.usbmodem
efax: 38:44 command "Q0V1"
efax: 38:44 waiting 2.0 s
efax: 38:44 .482 [ATQ0V1<CR><CR><LF>]
efax: 38:44 .714 [OK<CR><LF>]
efax: 38:44 response "OK"
efax: 38:44 command "E0"
efax: 38:44 waiting 5.0 s
efax: 38:44 .840 [ATE0<CR><CR><LF>]
efax: 38:44 .915 [OK<CR><LF>]
efax: 38:44 response "OK"
efax: 38:45 command "I3"
efax: 38:45 waiting 5.0 s
efax: 38:45 .066 [<CR><LF>Motorola SM56 USB 1.5.6<CR><LF>]
efax: 38:45 .091 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 command "+FCLASS=?"
efax: 38:45 waiting 5.0 s
efax: 38:45 .241 [<CR><LF>0,1,8<CR><LF>]
efax: 38:45 .266 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 command "+FCLASS=1"
efax: 38:45 waiting 5.0 s
efax: 38:45 .467 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 using Motorola SM56 USB 1.5.6 in class 1
efax: 38:45 command "+FTM=?"
efax: 38:45 waiting 5.0 s
efax: 38:45 .618 [<CR><LF>3,24,48,72,73,74,96,97,98,121,122,145,146<CR><LF>]
efax: 38:45 .643 [<CR><LF>OK<CR><LF>]
efax: 38:45 response "OK"
efax: 38:45 command "+FAR=1"
efax: 38:45 waiting 5.0 s
efax: 38:45 .793 [<CR><LF>ERROR<CR><LF>]
efax: 38:45 response "ERROR"
efax: 38:45 dialing T6666666
efax: 38:45 command "DT6666666"
efax: 38:45 waiting 120.0 s
efax: 40:45 .017 [<CR><LF>NO CARRIER<CR><LF>]
efax: 40:45 response "NO CARRIER"
efax: 40:45 Error: dial command failed
efax: 40:45 failed -> ts-fax.001
efax: 40:45 command "Q0V1"
efax: 40:45 waiting 2.0 s
efax: 40:45 .262 [<CR><LF>OK<CR><LF>]
efax: 40:45 response "OK"
efax: 40:45 command "H"
efax: 40:45 waiting 5.0 s
efax: 40:45 .413 [<CR><LF>OK<CR><LF>]
efax: 40:45 response "OK"
efax: 40:45 done, returning 2 (unrecoverable error)
abcs-computer:~ kmr$
And also one more information from /var/log/cups/error.log
I [12/Aug/2008:17:01:24 +0300] Started filter
/usr/libexec/cups/filter/cgpdftoraster (PID 275) for job 12.
I [12/Aug/2008:17:01:24 +0300] Started filter
/usr/libexec/cups/filter/rastertotiff (PID 276) for job 12.
I [12/Aug/2008:17:01:24 +0300] Started backend
/usr/libexec/cups/backend/fax (PID 277) for job 12.
I [12/Aug/2008:17:02:28 +0300] Saving printers.conf...
I [12/Aug/2008:17:02:28 +0300] Printer 'External_Modem' stopped by ''.
E [12/Aug/2008:17:02:28 +0300] PID 277 stopped with status 1!
I [12/Aug/2008:17:02:28 +0300] Hint: Try setting the LogLevel to
"debug" to find out more.
So thats all about all my trials and result.... Please help me to get out of this bad situation...
NOTE: I had changed the original FAX number from this post to different numbers...
Thats all...
Thanks in Advance...
and really awaiting for your valuable comments.First of all, really thanking you 3 for your posts. i dont need to do a internet faxing. The safari, which i mentioned, in the scenario is an example. My director might need to send FAX from doc files, html files, mails, pdf files etc.
So i need a solution to do the FAX through FAX pdf, which is available through printing.
Then regarding the analog vs digital PBX, here we use analog and digital PBX. But i am trying through the analog line. Still, today i went to the telephone people and asked to give me an direct line to check this out. Then i tried from it.
Fax command and faxing through graphical (fax pdf) gives the same error. But efax command showed a different kind of error message which i will post it here... So i think i will have to work on it... so i requested the telecommunication people to give me an direct line to my table for 2-3 days, so that i could run many test on it... but still i am waiting for their confirmation.
Anyway pls have a look at this message, and put forward ur suggestions.
NOTE: i forgot to notify in the previous post that, the main error point in the log files is "NO CARRIER"
Output of command efax:
abcs-computer:~ root# efax -d /dev/cu.usbmodem -o a -v ewincm -t T7777777 /Users/kmr/test-file.001
efax v 0.9a-001114 Copyright 1999 Ed Casas. Compiled Apr 24 2007 20:31:43
efax: Wed Aug 13 09:25:03 2008 opened /dev/cu.usbmodem
efax: 25:04 command "Q0V1"
efax: 25:04 waiting 2.0 s
efax: 25:04 .097 [ATQ0V1<CR><CR><LF>]
efax: 25:04 .330 [OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "E0"
efax: 25:04 waiting 5.0 s
efax: 25:04 .456 [ATE0<CR><CR><LF>]
efax: 25:04 .531 [OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "I3"
efax: 25:04 waiting 5.0 s
efax: 25:04 .682 [<CR><LF>Motorola SM56 USB 1.5.6<CR><LF>]
efax: 25:04 .707 [<CR><LF>OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "+FCLASS=?"
efax: 25:04 waiting 5.0 s
efax: 25:04 .857 [<CR><LF>0,1,8<CR><LF>]
efax: 25:04 .882 [<CR><LF>OK<CR><LF>]
efax: 25:04 response "OK"
efax: 25:04 command "+FCLASS=1"
efax: 25:04 waiting 5.0 s
efax: 25:05 .083 [<CR><LF>OK<CR><LF>]
efax: 25:05 response "OK"
efax: 25:05 using Motorola SM56 USB 1.5.6 in class 1
efax: 25:05 command "+FTM=?"
efax: 25:05 waiting 5.0 s
efax: 25:05 .234 [<CR><LF>3,24,48,72,73,74,96,97,98,121,122,145,146<CR><LF>]
efax: 25:05 .259 [<CR><LF>OK<CR><LF>]
efax: 25:05 response "OK"
efax: 25:05 command "+FAR=1"
efax: 25:05 waiting 5.0 s
efax: 25:05 .409 [<CR><LF>ERROR<CR><LF>]
efax: 25:05 response "ERROR"
efax: 25:05 dialing T7777777
efax: 25:05 command "DT7777777"
efax: 25:05 waiting 120.0 s
efax: 25:20 .008 [<CR><LF>CONNECT<CR><LF>]
efax: 25:20 response "CONNECT"
efax: 25:20 connected
efax: 25:21 waiting 2.0 s
efax: 25:21 .257 [<CR><LF>OK<CR><LF>]
efax: 25:21 response "OK"
efax: 25:21 received UNKNOWN
efax: 25:21 Warning: bit-reversed HDLC frame, reversing bit order
efax: 25:21 command "+FRH=3"
efax: 25:21 waiting 35.0 s
efax: 25:21 .357 [<CR><LF>CONNECT<CR><LF>]
efax: 25:21 response "CONNECT"
efax: 25:21 waiting 2.0 s
efax: 25:21 .959 [<CR><LF>OK<CR><LF>]
efax: 25:21 response "OK"
efax: 25:21 received CSI - answering ID
efax: 25:21 remote ID -> +000 2 7777777
efax: 25:21 command "+FRH=3"
efax: 25:21 waiting 35.0 s
efax: 25:22 .054 [<CR><LF>CONNECT<CR><LF>]
efax: 25:22 response "CONNECT"
efax: 25:22 waiting 2.0 s
efax: 25:22 .355 [<CR><LF>OK<CR><LF>]
efax: 25:22 response "OK"
efax: 25:22 received DIS - answering capabilities
efax: 25:22 remote has no document(s) to send, and can receive
efax: 25:22 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 25:22 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 20/10ms
efax: 25:22 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 10ms
efax: 25:22 command "+FTH=3"
efax: 25:22 waiting 3.1 s
efax: 25:23 .358 [<CR><LF>CONNECT<CR><LF>]
efax: 25:23 response "CONNECT"
efax: 25:23 sent TSI - caller ID
efax: 25:23 waiting 13.6 s
efax: 25:25 .109 [<CR><LF>CONNECT<CR><LF>]
efax: 25:25 response "CONNECT"
efax: 25:25 sent DCS - session format
efax: 25:25 waiting 13.6 s
efax: 25:25 .479 [<CR><LF>OK<CR><LF>]
efax: 25:25 response "OK"
efax: 25:25 command "+FTM=145"
efax: 25:25 waiting 3.1 s
efax: 25:25 .604 [<CR><LF>CONNECT<CR><LF>]
efax: 25:25 response "CONNECT"
efax: 25:25 Warning: termios.iflag is 000000005, not 000001005
efax: 25:25 Warning: terminal mode not set properly
efax: 25:25 waiting 30.0 s
efax: 25:28 .708 [<CR><LF>OK<CR><LF>]
efax: 25:28 response "OK"
efax: 25:28 sent TCF - channel check of 2700 bytes
efax: 25:28 command "+FRS=1"
efax: 25:28 waiting 3.0 s
efax: 25:28 .783 [<CR><LF>OK<CR><LF>]
efax: 25:28 response "OK"
efax: 25:28 command "+FRH=3"
efax: 25:28 waiting 3.0 s
efax: 25:31 waiting 2.0 s
efax: 25:31 .832 [<CR><LF>OK<CR><LF>]
efax: 25:31 response "OK"
efax: 25:31 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 25:31 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 20/10ms
efax: 25:31 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 10ms
efax: 25:31 command "+FTH=3"
efax: 25:31 waiting 3.1 s
efax: 25:32 .829 [<CR><LF>CONNECT<CR><LF>]
efax: 25:32 response "CONNECT"
efax: 25:32 sent TSI - caller ID
efax: 25:32 waiting 13.6 s
efax: 25:34 .579 [<CR><LF>CONNECT<CR><LF>]
efax: 25:34 response "CONNECT"
efax: 25:34 sent DCS - session format
efax: 25:34 waiting 13.6 s
efax: 25:34 .931 [<CR><LF>OK<CR><LF>]
efax: 25:34 response "OK"
efax: 25:34 command "+FTM=145"
efax: 25:34 waiting 3.1 s
efax: 25:35 .056 [<CR><LF>CONNECT<CR><LF>]
efax: 25:35 response "CONNECT"
efax: 25:35 Warning: termios.iflag is 000000005, not 000001005
efax: 25:35 Warning: terminal mode not set properly
efax: 25:35 waiting 30.0 s
efax: 25:38 .156 [<CR><LF>OK<CR><LF>]
efax: 25:38 response "OK"
efax: 25:38 sent TCF - channel check of 2700 bytes
efax: 25:38 command "+FRS=1"
efax: 25:38 waiting 3.0 s
efax: 25:38 .231 [<CR><LF>OK<CR><LF>]
efax: 25:38 response "OK"
efax: 25:38 command "+FRH=3"
efax: 25:38 waiting 3.0 s
efax: 25:41 waiting 2.0 s
efax: 25:41 .280 [<CR><LF>OK<CR><LF>]
efax: 25:41 response "OK"
efax: 25:41 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 25:41 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 20/10ms
efax: 25:41 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 10ms
efax: 25:41 command "+FTH=3"
efax: 25:41 waiting 3.1 s
efax: 25:42 .283 [<CR><LF>CONNECT<CR><LF>]
efax: 25:42 response "CONNECT"
efax: 25:42 sent TSI - caller ID
efax: 25:42 waiting 13.6 s
efax: 25:44 .034 [<CR><LF>CONNECT<CR><LF>]
efax: 25:44 response "CONNECT"
efax: 25:44 sent DCS - session format
efax: 25:44 waiting 13.6 s
efax: 25:44 .404 [<CR><LF>OK<CR><LF>]
efax: 25:44 response "OK"
efax: 25:44 command "+FTM=145"
efax: 25:44 waiting 3.1 s
efax: 25:44 .529 [<CR><LF>CONNECT<CR><LF>]
efax: 25:44 response "CONNECT"
efax: 25:44 Warning: termios.iflag is 000000005, not 000001005
efax: 25:44 Warning: terminal mode not set properly
efax: 25:44 waiting 30.0 s
efax: 25:47 .635 [<CR><LF>OK<CR><LF>]
efax: 25:47 response "OK"
efax: 25:47 sent TCF - channel check of 2700 bytes
efax: 25:47 command "+FRS=1"
efax: 25:47 waiting 3.0 s
efax: 25:47 .704 [<CR><LF>OK<CR><LF>]
efax: 25:47 response "OK"
efax: 25:47 command "+FRH=3"
efax: 25:47 waiting 3.0 s
efax: 25:50 waiting 2.0 s
efax: 25:50 .754 [<CR><LF>OK<CR><LF>]
efax: 25:50 response "OK"
efax: 25:50 Error: no command/response from remote
efax: 25:50 command "+FTH=3"
efax: 25:50 waiting 3.1 s
efax: 25:51 .757 [<CR><LF>CONNECT<CR><LF>]
efax: 25:51 response "CONNECT"
efax: 25:51 sent DCN - disconnect
efax: 25:51 waiting 13.6 s
efax: 25:52 .033 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 command "H"
efax: 25:52 waiting 5.0 s
efax: 25:52 .259 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 failed -> /Users/kmr/test-file.001
efax: 25:52 command "Q0V1"
efax: 25:52 waiting 2.0 s
efax: 25:52 .504 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 command "H"
efax: 25:52 waiting 5.0 s
efax: 25:52 .655 [<CR><LF>OK<CR><LF>]
efax: 25:52 response "OK"
efax: 25:52 done, returning 3 (invalid modem response)
abcs-computer:~ root#
Thanks in Advance... -
Hi,
I have implemented onramp and offramp for my customer. Onramp fax is working fine but the offramp fax is not working. When we test with facsBridge T37 we do not see fax coming on CME router.
Router configuration is
Model: 2911
IOS: 15.4(2)T
I have enabled the mta and foip debugs but no logs are generated. But when I run the wireshark debugs on laptop on which facsBridge application is running, I see acknowledgement from router. But Microsoft fax application which uses facsBridge as modem do the retransmission 2-3 times and then give fatal error.
I am not sure if issue is with config or i am hitting bug. Please guide me how to resolve this issue.one update...on wireshark i am seeing RST, ACK from router which means it is reseting the session...but could not find reason for that. i tired with app_faxmail_offramp.2.0.1.1.tcl and app_faxmail_offramp.2.0.0.0.tcl script, but results are same.
Below is config of cme.
fax receive called-subscriber $d$
fax send transmitting-subscriber $s$
fax interface-type fax-mail
mta send subject Fax from On-Ramp GW
mta send with-subject $s$
mta send postmaster [email protected]
mta send mail-from hostname xxxxsolutions.com
mta send mail-from username info
mta receive aliases xxxxxsolutions.com
mta receive aliases smtp.gmail.com
mta receive aliases 10.1.30.13
mta receive generate mdn
mta receive generate permanent-error
application
service onramp flash:/its/app_faxmail_onramp.2.0.1.3.tcl
service offramp flash:/its/app_faxmail_offramp.2.0.1.1.tcl
service offramp1 flash:/its/app_faxmail_offramp.2.0.0.0.tcl
service fax_detect flash:/its/app_fax_detect.2.1.2.4.tcl
param redirect-number 106
param mode default-fax
dial-peer voice 7010 mmoip
service fax_on_vfc_onramp_app out-bound
max-conn 10
destination-pattern 4652746
information-type fax
session target mailto:[email protected]
incoming called-number 4652746
mdn
dsn success
dsn failure
dial-peer voice 7020 mmoip
service offramp1
max-conn 10
information-type fax
incoming called-number 9T
image encoding MH
image resolution standard
mdn
dsn success
dsn failure -
[Urgent] Please help me verify the debug output on E&M interface.
Hello,
I've got a problem when trying to make a call from the E&M interface on the router to PABX(Panasonic). I've got any dail-tone back. Please help me verify the logging output. It seemed to already send the digits.
###########################debug vpm signal####################
.Sep 20 06:43:43.911: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_1100]em_onhook_offhook htsp_setup_ind
.Sep 20 06:43:43.911: [0/0/0] get_local_station_id calling num= calling name= calling time=09/20 13:43 orig called=
.Sep 20 06:43:43.915: htsp_timer - 3000 msec
.Sep 20 06:43:43.923: htsp_process_event: [0/0/0, EM_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]em_wait_setup_ack_get_ack
.Sep 20 06:43:43.923: htsp_timer_stop interdigit timer cfgd to 3000
.Sep 20 06:43:44.183: htsp_digit_ready: digit = 38
.Sep 20 06:43:44.183: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.443: htsp_digit_ready: digit = 39
.Sep 20 06:43:44.443: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.724: htsp_digit_ready: digit = 30
.Sep 20 06:43:44.724: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:44.996: htsp_digit_ready: digit = 38
.Sep 20 06:43:44.996: htsp_process_event: [0/0/0, EM_OFFHOOK, E_VTSP_DIGIT]em_offhook_digit_collect
.Sep 20 06:43:45.004: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_PROCEEDING]
.Sep 20 06:43:46.224: htsp_call_bridged invokedhtsp_progress_notify
.Sep 20 06:43:46.228: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]em_offhook_voice_cut
.Sep 20 06:43:51.184: htsp_process_event: [0/0/0, EM_OFFHOOK, E_DSP_SIG_0000]em_offhook_onhook, HF duration=480
.Sep 20 06:43:51.184: mlpp_detection_enabled MLPP is not supported on this interface
.Sep 20 06:43:51.184: em_start_timer: 480 ms
.Sep 20 06:43:51.184: htsp_timer - 480 msec
.Sep 20 06:43:51.664: htsp_process_event: [0/0/0, EM_OFFHOOK, E_HTSP_EVENT_TIMER]em_offhook_wait_release_req
.Sep 20 06:43:51.664: htsp_timer_stop
.Sep 20 06:43:51.664: htsp_timer_stop2
.Sep 20 06:43:51.676: htsp_process_event: [0/0/0, EM_RLS_WAIT_RLS_REQ, E_HTSP_RELEASE_REQ]em_wait_rls_release em_onhook (0)
.Sep 20 06:43:51.676: [0/0/0] set signal state = 0x0 timestamp = 0
.Sep 20 06:43:51.676: em_start_timer: 400 ms
.Sep 20 06:43:51.676: htsp_timer - 400 msec
.Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_WAIT_CLR_DONE, E_HTSP_EVENT_TIMER]em_clr_done
.Sep 20 06:43:52.076: htsp_process_event: [0/0/0, EM_ONHOOK, E_DSP_SIG_0000]em_onhook_onhook
##########################debug vpip vtsp all####################
.Sep 20 07:02:51.640: //44/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
Timer Stop Time=23417277
.Sep 20 07:02:51.640: //-1/D16BA46380FC/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
CDB=0x47575388
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_allocate_cdb:
CDB=0x47574E08
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_insert_cdb:
.Sep 20 07:02:55.416: //-1/xxxxxxxxxxxx/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
[state:INVALID STATE MACHINE, event:E_CC_SETUP_REQ]
.Sep 20 07:02:55.416: htsp_timer_stop3
.Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_og_call_req:
Echo Cancel=TRUE, Gain Control=0
Auto Gain Control=FALSE, Dual Tone Detect Mask=0x0, Seq Tone Detect=FALSE
.Sep 20 07:02:55.416: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_do_call_setup_req:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQ_PEND, event:E_VTSP_DSM_OPEN_SUCCESS]
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_pend_succ:
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
Mode=0, Peer=2
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
Target Carrier ID=
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_create_call_active_on_setup_req:
Source Carrier ID=htsp_setup_req
.Sep 20 07:02:55.420: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_request_call:
Progress Indication=3, Info Trans Capability=16
Calling Number=, TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed
Called Number=7744, TON=Unknown, NPI=ISDN
.Sep 20 07:02:55.420: htsp_process_event: [0/0/1, EM_ONHOOK, E_HTSP_SETUP_REQ]em_onhook_setup
.Sep 20 07:02:55.424: em_offhook (0)
.Sep 20 07:02:55.424: [0/0/1] set signal state = 0x8 timestamp = 0
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQUEST, event:E_TSP_PROCEEDING]
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
Timer Start Time=23417655, Timer Value=10000(ms)
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_proceeding:
Peer=2, Progress Indication=0, Return Code=2
.Sep 20 07:02:55.424: htsp_process_event: [0/0/1, EM_BRANCH, EM_EVENT_IMMEDIATE]em_branch_immediate
.Sep 20 07:02:55.424: htsp_timer - 300 msec
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_opened_cb:
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_NULL, event:E_VTSP_DSM_OPEN_SUCCESS]
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_req_wait_pend_success:
Event=72
.Sep 20 07:02:55.424: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
Timer Stop Time=23417655
.Sep 20 07:02:55.724: htsp_process_event: [0/0/1, EM_WAIT_DIALOUT_DELAY, E_HTSP_EVENT_TIMER]em_imm_send_digits em_send_digits htsp_dial
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQ_PROC, event:E_TSP_DIAL]
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial:
Digits=7744, Tone Mode=0
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dial:
.Sep 20 07:02:55.724: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
Digits To Dial=7744
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_dial_done_cb:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_DS_DIALING, event:E_VTSP_DSM_DIALING_COMPLETE]
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_dialing:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:
Digits To Dial=
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_dial_comp:
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/ds_do_dial:exit@556
.Sep 20 07:02:56.568: htsp_process_event: [0/0/1, EM_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]em_offhook_digit_done
.Sep 20 07:02:56.568: htsp_timer_stop2 htsp_progress
.Sep 20 07:02:56.568: htsp_timer2 - 850 msec
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQ_PROC, event:E_TSP_PROGRESS]
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_setup_pend_progress:
Progress Indication=8, Signal Indication=2, cdb->answer_supervision=0
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_start:
Timer Start Time=23417770, No Answer Timer Value=180000(ms)
.Sep 20 07:02:56.568: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:
.Sep 20 07:02:56.572: htsp_call_bridged invoked
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_check_cb:exit@1187
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_fax_config:
Fax Relay=ENABLED
Primary Fax Protocol=CISCO_FAX_RELAY, Fallback Fax Protocol=NONE_FAX_RELAY
Fax Relay CM Suppression :=ENABLED, Fax Parameters Set By=Global Settings
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_fax_feat_param:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_save_tty_config:
Save TTY configuration
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_set_tty_feat_param:
Set TTY feat parameters
.Sep 20 07:02:56.572: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQ_PROC, event:E_CC_DO_CAPS_IND]
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
Event=E_DSM_CC_CAPS_ACK
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQ_PROC, event:E_CC_CAPS_IND]
.Sep 20 07:02:56.576: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_peer_event_cb:
Event=E_DSM_CC_CALL_MODIFY
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_feature_notify_cb:
Feature ID=0, Feature Status=1
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:
.Sep 20 07:02:56.580: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_reactivate_ringback:exit@996
.Sep 20 07:02:56.580: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_VOICE_CUT_THROUGH]
.Sep 20 07:02:56.580: htsp_timer_stop2
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_dsm_bridge_status_cb:
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_SETUP_REQ_PROC, event:E_CC_DISCONNECT]
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_disconnect:
Cause Value=16
.Sep 20 07:03:13.913: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_ring_noan_timer_stop:
Timer Stop Time=23419504
.Sep 20 07:03:13.913: htsp_timer_stop3
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_WAIT_STATS, event:E_VTSP_DSM_STATS_COMPLETE]
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_dsm_dsp_stats_complete:
.Sep 20 07:03:13.925: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer:
Timer Start Time=23419505, Timer Value=60000(ms)
.Sep 20 07:03:13.929: htsp_process_event: [0/0/1, EM_WAIT_FOR_ANSWER, E_HTSP_RELEASE_REQ]em_wait_answer_release
.Sep 20 07:03:13.929: em_stop_timers
.Sep 20 07:03:13.929: htsp_timer_stop
.Sep 20 07:03:13.929: htsp_timer_stop2 em_onhook (0)
.Sep 20 07:03:13.929: [0/0/1] set signal state = 0x0 timestamp = 0
.Sep 20 07:03:13.929: em_start_timer: 400 ms
.Sep 20 07:03:13.929: htsp_timer - 400 msec
.Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_GUARD_ALL, E_HTSP_EVENT_TIMER]em_guard_all_timer
.Sep 20 07:03:14.329: em_stop_timers
.Sep 20 07:03:14.329: htsp_timer_stop
.Sep 20 07:03:14.329: em_start_timer: 3000 ms
.Sep 20 07:03:14.329: htsp_timer - 3000 msec
.Sep 20 07:03:14.329: htsp_process_event: [0/0/1, EM_PARK, E_DSP_SIG_0000]em_park_onhook
.Sep 20 07:03:14.329: htsp_timer_stop
.Sep 20 07:03:14.329: htsp_timer_stop2 htsp_report_onhook_sig
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_WAIT_RELEASE, event:E_TSP_CALL_FEATURE_IND]
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_call_feature_ind:
Feature Type=6
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_process_event:
[state:S_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF]
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/act_wrelease_release:
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_play_busy_timer_stop:
Timer Stop Time=23419546
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_timer_stop:
Timer Stop Time=23419546
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
.Sep 20 07:03:14.329: //48/E9FE7CA28104/VTSP:(0/0/1):-1:1:2/vtsp_do_call_history:
Coder Rate=16
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_dsm_closed_cb:
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_process_event:
[state:S_CLOSE_DSPRM, event:E_VTSP_DSM_CLOSE_COMPLETE]
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/act_terminate:
.Sep 20 07:03:14.333: //48/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_timer_stop:
Timer Stop Time=23419546
.Sep 20 07:03:14.333: //-1/E9FE7CA28104/VTSP:(0/0/1):-1:-1:-1/vtsp_free_cdb:
CDB=0x47574E08
Thanks in advance.
ToshiEDIT:
I've not got any dial-tone back from PABX.
Thanks in advance
Toshi -
I have a 5350 router, and I get some troubles. I can't use fax over wan links. Before I had a 5300 router and it works fine (same IOS version). Voice works fine, but I can't use fax. This interface is E1 with ISDN Q-Sig.
Configuration below...
==
version 12.2
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname 5350
no boot startup-test
logging buffered 20480 debugging
aaa new-model
aaa authentication login default local
aaa authentication enable default enable
aaa session-id common
resource-pool disable
calltracker enable
spe default-firmware spe-firmware-1
ip subnet-zero
ip cef
frame-relay switching
isdn switch-type primary-qsig
isdn voice-call-failure 0
voice call send-alert
voice call carrier capacity active
voice rtp send-recv
voice service voip
fax protocol t38 ls-redundancy 0 hs-redundancy 0
mta receive maximum-recipients 0
controller E1 3/0
pri-group timeslots 1-31
interface FastEthernet0/0
ip address x.x.x.x x.x.x.x
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial3/0:15
no ip address
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice modem
isdn bchan-number-order ascending
isdn sending-complete
no cdp enable
interface Group-Async0
ip unnumbered FastEthernet0/0
encapsulation ppp
ip tcp header-compression
async mode dedicated
peer default ip address pool mypool
ppp authentication pap
group-range 1/00 1/59
ip local pool mypool x.x.x.x x.x.x.x
ip classless
ip route 0.0.0.0 0.0.0.0 x.x.x.x
no ip http server
call rsvp-sync
voice-port 3/0:D
bearer-cap Speech
voice-port 3/1:0
compand-type a-law
mgcp profile default
dial-peer cor custom
dial-peer voice 8400 pots
application data_dialpeer
incoming called-number 8400
port 3/1:0
forward-digits all
dial-peer voice 1000 pots
destination-pattern 1...
direct-inward-dial
port 3/0:D
forward-digits all
dial-peer voice 1001 pots
destination-pattern 8...
direct-inward-dial
port 3/0:D
forward-digits all
dial-peer voice 2000 voip
destination-pattern 12..
session target ipv4:x.x.x.x
dtmf-relay rtp-nte
ip qos dscp cs5 media
5350#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 5350 Software (C5350-IS-M), Version 12.2(11)T8, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 27-Mar-03 22:32 by hqluong
Image text-base: 0x60008948, data-base: 0x61380000
ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5350 Software (C5350-BOOT-M), Experimental Version 12.1(20000922:142008) [nag-flo_t_0110 101]
cfw-5350-voip uptime is 1 day, 3 hours, 8 minutes
System returned to ROM by reload at 00:23:01 brz Fri Jan 21 2000
System image file is "flash:c5350-is-mz.122-11.T8.bin"
cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory.
Processor board ID JAE070401D5
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from IOS reload
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Primary Rate ISDN software, Version 1.1.
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
Board Hardware Version 3.34, Item Number 800-5171-02,
Board Revision C0, Serial Number JAE070401D5,
PLD/ISP Version 2.2, Manufacture Date 24-Jan-2003.
Processor 0x14, MAC Address 0x0B5FDAB22
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet/IEEE 802.3 interface(s)
37 Serial network interface(s)
60 terminal line(s)
2 Channelized E1/PRI port(s)
512K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
5350#
===
Can someone help me?
regardstry this:
voice service pots
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711alaw
voice service voip
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711alaw
dial-peer voice 900 voip
permission term
description your outgoing dialpeer
destination-pattern ^1234..
modem relay nse codec g711alaw redundancy
modem relay latency 150
modem relay sprt retries 6
fax-relay ecm disable
fax nsf 000000
fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback pass-through g711ulaw
no vad
and make sure you have g711alaw and g711ulaw in your codec preference list.
Maybe you are looking for
-
How to get a form to appear on the same page when a button is clicked?
Hi, I have a report on a page with a create button. When a user clicks the create button, a form should appear on another region in the same page....how do i go about doing this? I know how to do this if the form is on a different page, but i'd like
-
Validating a sender file using a JAVA UDF in PI message mapping
Hi, I have a sender file with one header and multiple detail lines. I have been asked to read a tag on the header which contains the total number of detail lines. I then loop round the detail lines counting the total number. If the total number of de
-
Create service attempt not working
I am using NetBean 6.7 to build client service using Tomcat 6.1.20. Everytime I attempt to build it gives me back the message: You are running on JDK6 which comes with JAX-WS 2.0 API, but this tool requires JAX-WS 2.1 API. Use the endorsed standards
-
Printer not working i get an error message of ink sytem failure : oxc19a0007 please help
HP photosmart all in one Model CD028A using windows 7 64 bit. It was working one week ago
-
My computer is a Gateway GT4024 connected to my 1610 printer via a USB port. My wifes computer is an HP750N and is NOT commected to the printer with a cable.. Both operate on an XP platform. We have a LINKSYS wireless router and both computers hav