OpenDocument and the Webi Job Server

(Using XI R2 on windows environment)
I have a Webi report which will be opened using the OpenDocument URL syntax, passing parameters through, with the report set to refresh on open.
When this report opens and refreshes does this use one of the Webi Job Server "Maximum Jobs Allowed"?
ie say the server is set to allow 10 simultaneous jobs to run, and these are all being used by scheduled jobs (say at month end) and someone uses the OpenDocument function, will this document wait until there is a job allowed to run on the Job Server or does it refresh immediatley?
Sorry if this doesn't make sense, its a bit had to explain what I think I mean.
Cheers

Hi
the WebI Job server is not involved in the workflow you described. The webI Report Server is repsonsible for creating reports on-demand. Calling your openDocument link will trigger the WebI report server. While the report is refreshed and remains open a connection will be opened on this server.
Regards
Stratos

Similar Messages

What is the Diffrence between Adaptive and Webi Job Server

Hello,
What is the diffrence between Adaptive Job server and Webi Job server?
In my BO server we didn't have Webi Job server but we are able to schedule the webi reports successfully.
Any Idea on this.
Thanks,
Nimesh.

I believe the Adaptive Job Server is on a generic shell server that behave as a Webi Job Server when it processes webi reports, as a program job server when it processes program object etc.

Netweaver administration and SAP Web Application Server r the same?

Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
Malti

Hi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh

Need to know why websites say my cookies are Blocked. My cookies are on and acept 3rd party cookies is checked and the web site is not blocked but Excite, StatCounter and links off of my job servcie site say cookies are blocked

I am getting error messages on several different pages that my cookies are blocked but checking the Tools - Options - Privacy accept cookies and accept 3rd party cookies are both enabled and the web sites are not listed under the exceptions button
== URL of affected sites ==
http://www.excite.com; http://my.statcounter.com; http://www.careerbuilder.com/jobseeker/ApplyOnline/ExternalApply.aspx?useframes=True&aourl=http%3a%2f%2fjobs.brassring.com%2f1033%2fASP%2fTG%2fcim_jobdetail.asp%3fSID%3d^yO_slp_rhc_SH6kO%2fBg3XfACT2rJ6oKKYLIsW2rhGiHOLenpNYCPYFHjYWwlbbMXORa6BsEbeeuFe2XAiP77_C_R__L_F_0JLmPqHv6d5W1fI_slp_rhc_1wVz03j7dDsFltg%3d%26jobId%3d356833%26type%3dsearch%26JobReqLang%3d1%26recordstart%3d1%26JobSiteId%3d5224%26JobSiteInfo%3d356833_5224%26GQId%3d0&Job_DID=J8E4VG6H6JZV4W5S7B5

Check on the setting, as far s i know it was there by going on tools>options> privacy then check it out. If there was no changes, what i can suggest is try to update your firefox.
[http://www.nestentertainment.com/nest-productions_c1441.aspx Kids Sunday School]

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Using SQL Server Reporting Services Standard edtion on the Web/App server

I would like some clarification of when is it a supported configuration to use SQL Reporting Services Standard Edtion with BPC 7.0M.
If you have a standard Multi-server installation with WEB/APP/RS/IS on one server and SQL/AS on the other server, is SQL Reporting service required to be Enterprise Edition? The v7.0M SP4 installation guide is a bit confusing on this because it says Reporting Services standard edition is supported, but then it says that SQL Enterprise Edition is required on the web/app server.
The Web/app would have SQL Management tools (edition-independent), Integration Services (edition-independent) and Reporting Services (Standard is allowed?) - so that would seem to mean that you can have SQL Standard edition on the front-end Web/App server.
Please advise as to what we need to tell customers going forward.
thanks,
Tony DeStefanis

Hi Tony,
SQL Server SE is supported for web/application server but you have limitation.
If you need multiple application server then RS has to be installed into a web farm and in thta case SE can not be installed it is required EE.
But if you have just one application server SQL server SE can be used without any problem.
More than that RS can be a complete separate server it is not necessary to be in any of SAP BPC server (web/application or database server) so in that case again you can use SE without any problem.
EE is required just when you need high availability and in that case you need to install RS into a web farm.
I hope this clarify a little bit when you can use and when you can not use SE for RS.
Regards
Sorin Radulescu

Wlserver.exe error occur while start the web logic server-please help

hi
Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
Thannks in Advance,
Cheers,
bala...

Could you please mail the errors and the WLS Version and service pack as well.
- Ramkumar

How Standalone OC4J and the Oracle Application Server linked to each other

Hi ,
Please let me know what is the relation between a Standalone OC4J and the Oracle Application Server ?
In my application The Oracle Application Server is installed in C drive and there is a Stand alone oC4j .
Please tell me how they are linked to each other .
Thank you .

It depends on your need and what features and functionality of Oracle Application Server you are interested in. Note that OC4J is a component of Oracle Application Server that can run as a standalone component or within Oracle Application Server. Question #6 in earlier mentioned FAQ document states:
OC4J standalone is J2EE 1.3 compatible (1.4 and 1.5 too in later releases of OC4J) and is able to be used in both development and small scale production environments. OC4J standalone provides its own inbuilt HTTP/S listener to allow clients to execute Web applications that it has deployed. Application deployment and server configuration of OC4J standalone is performed by the manual editing of a simple set of XML files.
For large scale enterprise deployments, the Oracle Application Server product is likely to be more suitable with its comprehensive feature set including Oracle HTTP Server, process monitoring and management capabilities, and its configuration and management console.
So if you are happy with what you see in standalone OC4J and scalability isn't an issue for you, you can stay with standalone OC4J and don't need to move to Oracle Application Server.
PS: If you do decide to use OC4J that's embedded with Oracle Application Server, you can't move your standalone OC4J inside Oracle Application Server. You will have to reconfigure embedded OC4J again (as you might have done with standalone OC4J) and redeploy your applications.
Hope this helps.
Thanks
Shail

Safari can't connect to the web proxy server (HTTP)

Hello,
I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

There are three possibilities:
1. You entered the wrong address and port number for the proxy.
2. You entered the wrong user name and password, if applicable.
3. The proxy doesn't work or is incompatible.

High availability for Lync 2013 persistent chat server and office web app server

I have 1500 users, need HA in primary data center and DR also. looking for HA and DR solution for persistent chat server and office web app server.
is below correct?
1. 2 persistent chat server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
2. 2 Office web app server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
also do i need HLB for both roles?

1) In Lync Server 2013, there are improvements in both high availability and disaster recovery:
High availability improvements: SQL Server mirroring is used to provide high availability for the Persistent Chat Server content database and Persistent Chat compliance database within a data center (in-site).
Disaster recovery improvements: Persistent Chat Server supports a stretched pool architecture that enables a single Persistent Chat Server pool to be stretched across two sites (that is, a single logical pool in the topology, with servers in the pool physically
located across two sites). SQL Server Log Shipping is used for cross-site disaster recovery.
For more information about high availability and disaster recovery, see
Configuring Persistent Chat Server for High Availability and Disaster Recovery in the Deployment documentation.
2) for HA & DR, you can 2 Office web app server in a pool of primary data center and 1 in DR. and You will need HLB for office web app servers
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Difference between reverse proxy plugin and java web proxy server

Hello
Can anyone please let me know what exactly is the difference between the reverse proxy plugin available with java system web server and the
java web proxy server.
Thanks
Manik Gupta.

The features are very closely related. The most notable and obvious difference is that The Web Proxy Server reverse proxy makes use of a content cache, while the reverse proxy of the Web Server does not cache results.
Message was edited by:
JoeMcCabe

How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.

How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.

If you created as an Exchange account on the iPhone (not IMAP or POP) and you have Push on it should all work smoothly; Reading a message on either client should mark the other read (it does on mine). Try deleting the account from the phone, rebooting the phone (to clear out old settings), then go to Settings/Mail,Contacts,Calendar, add an account and tap Microsoft Exchange and add the account back.
There is a fundamental difference between BB and iPhone that you should be aware of; on the BB you do not sync directly with Exchange; you sync with the RIM server which then syncs with your Exchange server. The iPhone syncs directly with Exchange using Microsoft's ActiveSync protocol. So in some ways they will behave differently. But ActiveSync should manage marking messages as read correctly.

OpenDocument and the Webi Job Server

Similar Messages

Maybe you are looking for