OpenDocument to open a specific instance of a report not just the latest?
Just wondering if anyone knows of a way to configure an OpenDocument hyperlink to open a specific report instance that was run on a certain day rather than just the latest?
Kind Regards
Nathan Block
I doubt if you could specify an instance based on a date it was ran. But if your instnaces have a different parameters for every scheduled instance then you can use sInstance=Param and pass-on the prompt values in the link.
- Noman Jaffery
Similar Messages
-
When I open firefox I am told I am not on the latest version although I am on v.8?
I run Firefox v.8 on a Sony Vaio laptop using windows 7 62 bit. Every time I open firefox I get a message saying I am not on the latest version and asking me to upgrade. Can Iprevent this, please?
Is that a legitimate pop-up that you see visiting a Mozilla site?
You are currently running the latest Firefox 6.0.2 release, so there are no updates.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version -
I shall open delete my present account with iTunes and open a new one - but I do not have the password. How can I then delete the present account??
Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan -
On the opening page of Firefox, I am constantly reminded (and sometimes warned) that I do not have the latest version of Firefox. Yet, when I click for upgrade, I start getting a download of the same version 8.0.1 which I am already running.
This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same. -
Hey, I'm having trouble launching Itunes, I wanted to updated but it didn't open so I wento to this page and downloaded the latest version, and now Itunes doesen't want to launch again. Help me please and also I want to know if my music will be erased?!?! Sorry for my ignorance but i'm not good at this kind of stuff. I will aprecciate a lot if you could help me please!!!! :c
Hi cheperrumps,
Welcome to the Support Communities!
Uninstalling or reinstalling the iTunes application won't affect your music (data) -- but it's always a good idea to have a backup!
The information below will show you how to do that and to troubleshoot your issue with iTunes:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/ht1751
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Cheers,
- Judy -
How do I save emails in a specific folder in my Documents, NOT in the email account folders.
Thx,
BeginnerOpen the email, do a save as have it save to the location you want from the drop down menu (You could select desktop and then drag it into a folder in documents) and click save as a .rtf.
Or you can copy and paste into a document (Word, Pages, Text Edit...) Make a folder and put it in docs. -
Upgraded to yosemite and cannot open iphoto. Its say i need to upgrade the latest version but it is not available in the Australian store?
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Why can't I open iTunes or apps on ipad1? And why do apple not support the latest update for ipad1 when it's less than 2 years old. I am sick of huge corporations ripping off joe public!
And the processor limitations.
iPad: RAM - 256MB, Processor - 1 GHz Apple A4
iPad 2: RAM - 512MB, Processor - 1GHz dual-core Apple A5
iPad 3: RAM 1024MB, Processor - 1GHz dual-core Apple A5X
Similarily, the iPad 2 did not get Siri and some other features in iOS 6.
Cheers, Tom -
There are/were three problems:
'''1.''' Why, when I open Firefox 9.01 do I get a message that I do not have the latest version when '''Help>About''' Firefox says I do?
'''2.''' Also, with the 8.xx version, I was unable to open in a new window with a right click until I upgraded to 9.01. (Old problem now, but I am curious.)
'''3.''' When I tried to uninstall the older version the uninstaller told me that I had to close the open version, but it was closed according to my taskbar. I also have this problem with Thunderbird.1. You are using the latest version which is Firefox 9.0.1
From your description it sounds as if you may still have the old http://www.google.com/firefox Firefox start page hosted by Google as your homepage. This old default homepage is no longer used as '''about:home''' has been in use since Firefox 4.0
Either ignore the message, change homepage to '''about:home''', change it to another page or leave blank.
http://support.mozilla.org/en-US/kb/How+to+set+the+home+page -
I just installed Yosemite. iPhoto is gone, and Photos does not open. Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US. What do I do? Cannot access any photos.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
My homepage does not show the latest page when I open Firefox
I have set MSN as my homepage but when I open Firefox it does not show the latest MSN page.
'''''Has the site worked normally in Firefox before?'''''
When you have a new problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help? -
When I open organizer in windows 7 I can not see the top menu
When I open organizer in windows 7 I can not see the top menu
Is the top part of the organizer off screen?
Can you see the minimize and maximize buttons?
Can you post a screenshot of the organizer screen? -
When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message? I have to double click the latest message to open it and then reply. I find this irritating and would like to skip this step and be able to reply from preview and include that message. Am I missing a setting to fix this?
I have found that if you have highlighted some text in the message and then hit reply, the highlighted section is the only bit included in the reply. You need to click on the message in the middle list rather than the preview pain on the righthand side and it should reply normally. To check it's doing this, select a message in the middle section of the screnn then use the down arrow to drop to the next message. Hit reply, and it should reply normally. I hope this helps.
-
ive need to open a document and it states that i need the latest version. Im running the 11.0.09 on windows 7 help!
ive followed the link several times and updated to the latest version, what am i doing wrong?Hi stuartosachuk,
Please type chrome://plugins in the Chrome address bar. Then, disable 'Chrome PDF Viewer' and enable 'Adobe Reader' plug-in as shown in the screenshot below:
Now, close the Plug-ins tab and restart Chrome.
Regards,
Anubha -
Open a subreport from an existing report without hitting the database
Hello Experts,
I want to open a webi subreport with the data from an exisiting webi report directly not from database.currently i am using hyperlink on some measure values and in theses hyperlink, i am using opendocument query and passing the values in the filters created at subreport side,but every time i clicked on hyperlink its opening the subreport but taking data from data base instead of existing report.
i also tried in this way by passing a context from parent report :
I am having country column in my report which is having many countries, i want that when i click on england it should open the subreport with the data only for england from parent report not from database.
="<a href=\"http://server:port/OpenDocument/opendoc/openDocument.jsp?sType=wid&sDocName="URLEncode("aaa")"&sReportName="URLEncode("aaa")"&sReportPart=table name at subreprt""&sPartContext=/country[england]""&sWindow=New""&sRefresh=N""\" title=\"click\" target=\"_new\" nav=\"web\">"[country]"</a>"
Thanks in Advance:)Hi, Harry.
Have you tried editing your subreport query properties? uncheck Refreshable and Editable checkboxes.
Maybe you are looking for
-
I have ordered a new macbook retina pro with 256gb hardrive, i7 processor and 16gb ram. It still hasnt arrived become im ordering it overseas however when it arrives i want to download windows 8.1 on it and i need some help please!
-
Class cast exception when deploying in Solaris
I have an application which has LdapRealmV2 configured and I'm programmatically checking permission for a group. The code when deployed on a windows environment is working fine. I now tried to deploy the same in a Solaris clustered environment. I get
-
PI CCMS customisations in Java Stack MTE'S not saving
When trying to change the conditions for alerting in rz20 the follow exception is occuring in the java stack.. Exception in ConfigurationChangedListener: Unexpected type (538976288). ======================================================= java.lang.I
-
Pixel Bender custom multiply blend and other questions
I am creating photo editing application on iPad and i am using Pixel Bender to calculate effects. But ive got a problem with multiply blend mode.When i run it in CPU/GPU mode, it runs fine(result looks absolutly 1:1 as from photoshop). But when i swi
-
How to read the method and put that code in 1 internal table
Hi, Actually in the normal ABAP, if we want to read the report, then we will write read report statement. If we want to read method then this statement will not work. So, to read the method and put that code in 1 internal table , which statement we